Multiple QT Files as chapters

Hi, I'm constructing a two disc DVD set of our recent vacation whihc contains about four hours of DV in 16 QT files exported from FCE. Can I use iDVD to build these DVDs or have I gone beyond the capabilites of this app? If I can how do I link the QT files as chapters so they play contiguously.
Many thanks,
Stu...

As Bengt suggested import the 1st four files into iMovie HD to join them together. Add chapter markers where you need them but:
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
*Make sure you do not have the "Share selected Clips" option checked when preparing to share to iDVD
Courtesy SDIllini
Do the same for the next 4 files. Remember that the playing time of each four must be less than 2 hours including any menu time. If you have dropzone menus or that can eat up 10 minutes or so. If you're close then you might want to use an old theme without dropzones, add your own background.

Similar Messages

Tag structure lost while combining multiple PDF files

Hi All,
As per client requirements, we have been using ABBYY Fine reader to create PDFs. After creating multiple PDFs of a huge book (separated logically according to Units consisting diff Chapters), we have tagged them correctly.
We need to know put these tagged PDFs together. However, while combining multiple tagged files, we loss the Tagged structure!!! (using Adobe 8 Professional)
Any idea, why are we losing our tags in the combined file? Any help in this matter would be highly appreciated!
Thanks in advance!
Mamta

Hello Steve (and ALL),
We are combining the files using File --> Combine Files... dialog box. We also tried Document --> Insert Pages. In both the cases, my tag structure of all files just dont appear!
While combining files we get the following:
Tags
--- Document
-----Part (Empty)
-----Part (Empty)
-----Part (Empty)
(The number of "Part" corresponds to the number of files I try to combine)
While Inserting the pages into a file, we only get to see the tag structure of the first file into which we insert the pages.
Are there any other methods to combine the files???
Regards,
Mamta

Epub with multiple xhtml files

Would it be possible to add the functionality that an InDesign file can output to epub creating multiple xhtml files without having to use the Book feature? It should be the case that ID can split the content by chapters (TOC) for individual files to the epub. It is recommended that these files be below 100k for optimal epub functionality.
Thanks, Lynn

You load one file per command and then you can consolidate once the last file is loaded.

How to create a blu-ray disc with multiple source files

Hello,
How is it possible to create a blu-ray disc, AVCHD recordable DVD with multiple source files from Final Cut Pro 10. Is it possible to create a menu with several chapters corresponding to the sequences (source files)?
Thank you in advance for your support.

Assume you're talking about using the Create Blu-Ray batch template. It's not possible to do with multiple source filles. But if I understand your objectives, you could pretty much get what you think want – discrete movie segments on a single disk with navigation.
The way I'd approach it is by making multiple projects in FCP and then copying the finished versions into a new project, separated by gaps. (You could also use compound clips but I'm not a fan except for very short sequences, which is why I'm suggesting the copy route.) Then export and bring into Compressor.
In Compressor mark your chapters at the gaps between your individual sequences. Then choose the AVCHD option in job actions.
Bear in mind that you'll have to keep the recording time under roughly 30-35 minutes @a5 Mbts/sec
Good luck.
Russ

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

How to exreact multiple pdf files from a zip files from application server to presentation server

Hello exprts,
I am passing one pdf file and one text file to zip file in apllication server through my custom program and then downloading it using standard function module to my desktop. its working fine. Then I added another pdf file to my zip file. But only single pdf file is getting download . So can you please help me regardiong this issue?

Dear Experts ,
I finded out the way to extrcat pdf files in presentation server. But now my problem is that I am not able to add multiple pdf files in a zip file. When I am adding new pdf file then older one is not coming in read data set. So please kindly tell me how can I add multiple pdf file in my zip file and again I can get all the pdf files from here.

IE running under XP can't handle multiple SWF files, Why?

I noticed that IE 8 running under Windows XP cannot handle multiple swf files in one page.
Up to about 10 files is no problem they are loaded and we can play them ( buttons that start a small audio file).
But more of these files in one page will stop IE.
Firefox ( 3.6.28) runs them fine.
And also IE 8 and/or Firefox under Windows 7 handles them perfectly.
Has anyone any idea what can cause this and how to resolve this?
Thanks,
Onno Tomson
The Netherlands

Sorry...I still don't get it. What is it about Windows FUS that keeps iTunes from running running the process twice? It can run many other non-Apple windows apps in multiple user sessions (commercial apps, open source apps, audio/video apps, networked apps). I can even run two different virtual machines at the same time under two different user sessions.
Why can iTunesHelper.exe run twice but iTunes.exe cannot? Why can I run Safari at the same time? Quicktime Player runs fine under multiple user sessions.
Blaming it on Windows and/or FUS sounds like FUD. Can anyone give a valid technical reason? Semaphores? Mutexes? An admission (and explanation) that the Windows version is purposely crippled?

Open Multiple PDF files from Production order/Routing

Hi Everyone
We are in ECC 6.0 environment. We have a scenario where multiple documents were attached to single operation and also at multiple operations. But when I was trying to open these PDF documents, only the last file was getting opened and closing the previous file. How can I open multiple PDF files at one time from Production order or Routing?
Any help is appreciated.
Regards
Prasad

Hi Prasad,
from DMS standard I regret but such a functionality is not available. In the standard originals can be opened only one after another.
I think for realising this functionality an individual modificatoin is necessary.
Best regards,
Christoph

Multiple DB files clean migration (follow up to my decommission question)

So I have requested help standing up a new environment and phasing out an old one since it was "all messed up" after spending some time digging into it it looks like best practice was followed (which I don't know how I missed this after reading
through Mastering the fundamentals by Kent Agerlund multiple times). Apparently they suggest you create multiple SQL file based on how many CPU's you have available to help performance.
The question I have now is when the backup site task runs it only backs up 1 2GB MDF file and a 11GB LDF file. Does that make sense? It doesn't look like the other SQL files that were created are being used at all? None of the SQL files have not grown past
the initial size (the first file started at 2GB and is still that size).
Assuming everything is working correctly my new plan would be to upgrade the existing setup and do a backup and restore to the new box using the same site code and server name. If I do that will it bring all those other SQL files with it our can I consolidate
onto 1 file again? I don't think we need to worry about performance as the DB is pretty small and I'm trying to keep things simple.
My other choice is I have the new server built with new site code so I could add the first site as a child site and migrate things over? I have multiple DP's out there so I'm not sure best way to handle that. The plan was to blow them away and rebuild brand
new ones for the new site, but if I can just throw an upgrade on them that should work and be less work.

My other choice is I have the new server built with new site code so I could add the first site as a child site and migrate things over?
That won't work in CM12.
Just back up the database using SQL and use that for the restore (there's no need for the SMSBackup task in CM12).
Torsten Meringer | http://www.mssccmfaq.de

Read & Filter Multiple .wav files, Export Filtered SPL

Hi
I'm searching for tips on how to use LabVIEW to read multiple .wav files, then filter them, then export just the calculated SPL values to a "database friendly format".
Basically I want a solution that allows me to point to several files, then press a "go button" that triggers LabVIEW to produce filtered SPL values as exported data.
I'll skim over the cal approach since I'm confident most readers know how to handle it. Basically, though, for each 30 s .wav file of broadband noise, an associated cal tone file is used to determine the dBFS value (dB below Full Scale) to be associated with 94 dB SPL, or 114 dB SPL, as the case may be. I'll leave it at that.
Detailed Requirements, (excluding cal steps, tho).
1) Operates on up to a dozen 30 s time records (44,1 kSa/s, mono .wav files);
2) Passes the signal from each desired .wav file through 18 of the 1/3 octave filters (IEC 1260 compliant, as in the S/V toolset) not necessarily in real time!;
3) Calculates the SPL for each 1/3 octave filtered time record; This makes (12 files) x (18 filters) = 216 filtered SPL values if end-user points to a dozen broadband noise files before pressing the "Go" button;
4) Exports SPL values in a suitable database format; an existing database does the rest of the mathematics and report generation;
Client FileMaker database functions include:
- import and store 1/3 octave filtered Leq(30) SPL values;
- average filtered SPL across the declared qty of mic positions of the present test case;
NOTES:
1) In the field, we do NOT use simultaneous / MULTI-mics. Instead, it is absolutely an "open and shut case" that the optimum process is to move one (1) single mic quickly from spot to spot. While holding the airborne noise at a constant level we position the mic at each spot for 30 s to feed the .wav recorder, then move on. We emerge from a typical day of field activity with, say, 60 to 100 .wav files to post-process.
2) (1), above, explains why we don't use any N.I. DAQ h/w.
3) LabVIEW, it seems, exports best to a spreadsheet, so if needed, I'm prepared to handle manually any ugly conversion from LV's format to a proper database format ("1st Normal Form, 2nd Normal Form, etc.).
4) Given a choice to calculate the averages in my database, versus in LV (say, to cut down on exported data qty), I'd likely opt to export the 216 SPL's and then do averaging in the database, (where the ASTM E336 reports are done).
TIPS Gathered To Date:
1) S/V toolset has IEC 1260 compliant filters, BUT...
2) If you use the S/V toolset VI's, then you CANNOT ACCESS the filtered time record NOR CAN YOU WRITE the filtered data back to a .wav file! All you can do is measure the filters' outputs. Fortunately for us here, the available measures include SPL.
Aside: Although not a show-stopper in this project, this constraint is surprising, nonetheless. To access & record the filtered sound, you'd have to either (a) ask N.I. to unprotect VI's, or (b) develop your own IEC compliant filters from N.I.'s published tap co-eff's etc.;
3) LabVIEW does not support drag'n'drop operations on files. Instead, the recommended technique is to use multiple "Browse to/ Navigation/ File Open" panels to allow LV to open the user's desired qty of .wav files simultaneously;
Thanks for any tips!

The filter VI is password protected in the Sound & Vibration Toolkit (SVT) for two reasons. First, since the filter is compliant to a standard, by locking the code we guarantee that no one has the chance to accidentally change it so that they are no longer compliant. Second, the method of filtering the data is considered intellectual property that we are protecting.
That said, from reading your post it does not appear that you need to have access to the filtered data since you are making an SPL measurement which is provided in the Sound & Vibration functionality. Is that correct?
Also, I wanted to point you to another subVI which comes with SVT but is not in the pallette that might be of use. There is an example for SVT which is SVXMPL_Wav Power Spectrum which opens up a wav file and computes the power spectrum of it. Inside the VI, there is a subVI which will open a Wav file and convert it into a waveform which you can use with your SVT functions.
Hope that helps,
Jack

How can I print multiple PDF files at once using Windows 7?

How can I print multiple PDF files at once, on an HP LJ Pro 400 xcolocr printer without opening each
one separately using Windows 7?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How i can combine multiple pdf files in one file using a macbook air

how i can combine multiple pdf files in one file

The application Preview.
Preview Help.
Save combined PDFs
Open the PDFs you want to combine.
In each open PDF, choose View > Thumbnails to display the pages of the PDF in the sidebar.
Drag the thumbnails you want to add (Command-click to select noncontiguous pages) to the thumbnail sidebar in the other PDF.You can add pages to the end of the document or between pages in a document. Drag thumbnails to reorder them. You can also add a PDF file before or after another PDF document.
Choose File > Export to save a new PDF containing all of the combined pages, or choose File > Save to replace the original version of the destination PDF with the version containing the combined pages.

How to bundle a .FLA and multiple .SWF files in one .EXE?

Hi,
I have a .FLA file which uses loadMovieNum() to load various
.SWF files when each one is called by the user clicking on a
button. Each .SWF file also uses loadMovieNum() to call a second
.SWF file. When I publish the .FLA file as a .SWF file it all works
beautifully.
Now I need to package the entire project into a Windows
projector .EXE file for offline use on a computer without the Flash
Player. When I publish the main .FLA file as a .EXE file, the .SWF
files still load, although they blink before fully loading and
displaying steadily.
What I would really like to do is to bundle all the .SWF
files into the .EXE file so when I send the finished project to the
end user, they only have to deal with one file, rather than a
folder with the .EXE file and multiple .SWF files.
Is there a way to do this?
I am using Flash 8 Professional.
Thanks,
Cam

Since this isn't going to be web-based, why not include all
the external swf files into the same Flash file and then use
attachMovie?
This will allow you to create one .exe file that would
contain EVERYTHING. Since you aren't worried about loading speeds,
you don't have to load the movie clips, but can simply create one
large Flash file.

How to have multiple preference files for Mail on one computer

I would like to have multiple preference files for Mail on one computer, one copy for each person in the organization. I want everybody to log in as the same user. Is this possible?
Thanks,
John Link
Cube, 450 MHz, 640 MB Mac OS X (10.3.9)

Since the Mail.app preference file (along with all other application preference files for a user account) is stored in that user's Home folder/directory, I don't believe this is possible.

Multiple Domain files, Multiple Sites, Publishing Problems

I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

Mark:
I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
Do you Twango?

Multiple QT Files as chapters

Similar Messages

Maybe you are looking for