Multiple Queries and Web Template

Hi,
I've about 15 queries to output with a certain web template, and 15 more with another web template. How can I do this ?
Is there a parameter to assign a web template in a query or not ? I don't find it.
Thanks.

Gilad,
I was searching for how to associate multiple data providers with 0ANALYSIS_PATTERN web template in SDN BW forum and I saw your post. I have a similar problem except I have a TAB page in my development. I have 2 data providers with each tab show one data provider. But both tabs should show the default template of 0ANALYSIS_PATTERN so I will get the consistent look for all the tabs. I tried a few ways but none of them works. Can you please suggest what I should to do to resolve this problem?
Thanks in advance for your help!
Sharon

Similar Messages

Migrating queires and web templates

Hi All
We have just upgraded our front end and are now thinking about converting/migrating the queries and web templates etc.
1: We havent done our dataflows yet as we will do these later. Does anyone know of any possible problmes of dojng the queries/templates but not the datalows?
2: Does anyone have a 'best way of doing the queires and templates...eg. what order?...All at once? ...One by One?
3: What are the tools to convert them all in one go for web templates and queries
Any other useful info would be helpful
Goawatson

Go though these links it would be of help.
Upgrading Bex Queries from BW3.5 to BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
Process of Migration
&#56256;&#56452; Save Query with SAP NetWeaver 7.0 BEx Query Designer
&#56256;&#56452; Query object itself will always get new version
&#56256;&#56452; Reusable Query components (structures, key figures, variables) will get
new version only if required

Query related to BEx query and web template migration

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Query designer report and Web Templates

Dear All,
I have a very basic/stup doubt.
Are reports made through Bex Query Designer and Web Templates the same?
Actually there is a following requirement:-
"Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
Thanks.

Hi Anup,
by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
as you mentioned that you are using the web dynpro.
i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
so the most clear view can be given to client using the WAD reports

Migration of work books, queries and web report

Hi,
kindly give me the steps to migrate workbooks, queries and web reports from BW 3.5 TO BI 7.0
Regards
Asim

Hi,
Kindly check the below link:
Migration of Queries and Work Books from BW 3.x to BI 7
/people/teja.badugu/blog/2008/11/11/migration-of-queries-and-work-books-from-bw-3x-to-bi-7
Hope it helps,
Thanks,
Amit

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

Authorization to query and web template in BI 3.5

Hello
I need to grant users athorizatio to the WEB template and its query. Query is based on Multiprovider.
Should I save query and WEB template to existing role and grant authorizaion to tis role or I also need to grant authorization to multicube and all cubes underneath?
Thanks

Hi,
You need to assign two objects for authorizing web templates and query..
S_RS_COMP AND S_RS_COMP1... in both these object you need to assign appropriate roles and activities.
S_RS_MPRO object to assign authorization to MP.
Regards,
Anup
Edited by: Anup Chaudhari on Dec 3, 2009 8:42 AM

Filters Query and Web Template

Dear All,
Many reports use filters in both the query and the web template. What
is the difference?
Regards,
KS

the filter used in query and web templates are same
there is no difference between filters used.
as webtemplate uses the same query as its data provider so it is going to run the same filters.
for e.g. if u have query x then if there are filters in it .
if u have webtemplate y , and u have to assign a data provider to webtemplate which is nothing but query itself....
so if u run webtemplate u will at the end execute query x only...
now wat is filter.
filter means it will filter out that data.
for e.g. if u created a variable for calendar month and u restrict it so that user can enter the calendar month value range when they execute query x....
then if u execute query x
then upon its execution the variable will pop u p and it will ask u to enter range of calendar months
lets say u enter 1/2007-12/2007
so u r query executes and it will only bring data for year 2007.
now if u wish to see the data of 2006 and try to restrict it in Context menu or Restric screen, then it will display as NO DATA.
this means it will filter the data for particular year.
so if u wish to see the data for all years
then dont create variable and dont restrict Calendar month
Instead bring calendar month in Free characteristics
so later u can run the query for different years.
i hope u understand

IE error of query and web template

Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguo

same here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error.

BEx Web Template (BTMP) and Web Template (TMPL)

Hi,
I found in BI7 Objects, there are BEx Web Template (BTMP) and Web Template (TMPL). what's the different between them? For the BEx Web Template (BTMP), i can find in Web Application designer.
But for Web Template (TMPL), I cannot find them in Web Application designer. How can I edit them?
for example, there is a standard Web Template (TMPL) 0tpli_0tct_mc01_q0111, where can I change it?
Many Thanks
Jonathan

hello,
TMPL is for 3.5 template and BTMP is for BI 7.0 templates. For opening 7.0 template you need to use BI 7.0 WAD not 3.5 WAD.
you can open the standard template 0tpli_0tct_mc01_q0111 in WAD and then do save as to save it custom template.
Then you can edit the custom template and make the changes.
Make sure that the std. template is installed correctly.
Regards,
Dhanya

What is difference between Site template and web template

What is difference between Site template and web template

Both are almost same, are you referring to Site Definitions vs web template?, if so, refer to the following post
http://blogs.msdn.com/b/vesku/archive/2011/07/22/site-definitions-vs-web-templates.aspx.
--Cheers

Can we use multiple queries on one template

Can we use multiple queries on one template

Hi,
if you're using data templates for your data set, you
can put multiple queries in the XML data template.
The queries may then be linked (or not) by the "link
name" tag ...
Grtz.Following you answer here...do you know eventually how/if possible to preview a report (with XMLP Desktop) that is using data templates for the data set?
Thanks,
Liviu

Definition of Non cumulative Key figure and web template

Hi all,
Can anyone define a Non cumulative Key figure and a web template.
Thanks in advance.

A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time.Examples of non-cumulatives include headcount, account balance and material inventory.If the non-cumulatives change infrequently, you should choose non-cumulative management with non-cumulative key figures.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
for webtemplates you can info in the following
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/content.htm

Multiple queries in a template - How to improve performance?

Hi experts,
I have a complex web template that has 12 queries embedded as data Providers. In RSRT, each query takes appr 4 seconds.
The template runs in appr 50 seconds. I'm not sure on how it is processed in the background. I suppose the queries run one after the other?
Are there parameters somewhere that could be set differently to reduce the execution time? Such as allowing more than one query to run in parallel?
Thank you,
JLT

you can reduce the calculation done at query level to help improve the performance.

What is BEX reports and workbooks and web templates

please send me in 2 lines of each,..thx

All 3 are the different forms of Result display
Bex Reports: It is based on MS excel functionalities and output is in Excel form. All reporting functionalities like swaping, exception, condition, etc..can be used.
Workbook: Bex reports can be formated as per need..say making bold, creating your own layout, adding images. In short all excel functions. This workbook gets refresed when new data loaded to datatarget
Web Template: Here charts, combos, dropdown...wtc ca be added what is called as Template.
Regards
Pankaj

Multiple Queries and Web Template

Similar Messages

Maybe you are looking for