Multiple queries

hi all, i have multiple procedures in my package that access the same table.
for example, procedure 1 have a select stmt such as select * from table1 where id=4 and date=1/22/2009
in procedure 2 i have the same query joining with some tables
in procedure 3 i have the same query above with other different joins.
the query retrieves about 4 million record. i would like to know what technique to use so that i dont have to use the same query over and over again.
all procedures in the package do different logic but they all need to access table1 (select * from table1 where id=4 and date=1/22/2009)
i dont want to use pl/sql table do to the amount of data,4 million, and the pga memory etc.

If your table is partitioned on id and you use an equality predicate on id in your queries, then at worst, you will get a full scan of a single partition, not the whole table.
It sounds like you want to materialize the results of the query to use multiple times. In which case a GTT could be the solution, depending, as other have said, what exactly you are doing, and how you are doing it. However, unless the single partition you are selecting from is significantly larger than the 4 million rows you are actually selecting form the partition, I doubt that you would see any benefit at all from using a GTT, or materializg the results in other ways.
Think about it this way, it is going to take x amount of time to select 4 million rows wherever you are selecting them from. The value of x may be slightly smaller if you are selecting 4 million rows from a 4 million row GTT than if you are selecting 4 million rows from a 40 million row partition.
Keep in mind that however you materialize the 4 million rows, you will still need to run a query to materialize them before you do any processing using them. So, you will need to save enough time in your processing from using the materialized version compared to just selecting the rows in each process to offset the initial "useless" query time needed to materialize the rows.
John

Similar Messages

Multiple Queries in Workbook - Refresh Screen Shows Up for Every Query

We have multiple queries in a workbook. All of these queries have the exact same selections for the variable selection screen. When all the queries are refreshed once, the selection screen used to show up once and all the queries are refreshed with the same selections.
We were on BI 7.0 and SP10. We recently moved to SP12. Since the SP12 installation, the multiple query refresh pops-up the selection screen for every query. It is nothing like "multiple query refresh" at once since the user has to click "execute" button for every single query. It is interesting to note that the selection screen only contains hierarchy variables and hierarchy node variables. The other variables of selection screen do not show up. I couldn't find any OSS note on this topic. Please let me know if anyone has any comments on this issue. I will assign points to useful posts.

hi Sameer,
try to update front end patch to latest version ?
Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements
hope this helps.

Multiple queries in reports with XSL-FO and without BI Publisher

Hello,
I'm trying to find out how to create a complex report in APEX for printing. The report contains multiple queries in different layout, images and static text.
I don't have the possibility to use BI Publisher and I'm not an XSL-FO expert. However I'm trying to find out if it's possible at all not using BI Publisher.
I'm having the impression that multiple report queries and layouts in APEX can only be used in combination with BI Publisher. I'd be glad if someone could give me an example of how to do multiple queries and layout in a single report only using XSL-FO.
Thanks in advance,
Jan Willem

Hello,
I'm trying to find out how to create a complex report in APEX for printing. The report contains multiple queries in different layout, images and static text.
I don't have the possibility to use BI Publisher and I'm not an XSL-FO expert. However I'm trying to find out if it's possible at all not using BI Publisher.
I'm having the impression that multiple report queries and layouts in APEX can only be used in combination with BI Publisher. I'd be glad if someone could give me an example of how to do multiple queries and layout in a single report only using XSL-FO.
Thanks in advance,
Jan Willem

Multiple Queries on Interactive Report

hi all,
Can i run multiple queries based on some condition in creating an interactive report?? I mean
i want to run a single query as
if :P12_QUERY == 1 then
first query
else if :P12_QUERY == 2 then
second query
end if;
Please provide me the syntax if its possible. Plz help me in this regard.
With Regards,
Sunil Bhatia

Hello,
You will need to create a pipeline function and use it in your query. But both your queries have to return the same dataset.
Example:
function choose_query(v_query_type integer) return some_type pipelined
is
v_query varchar2(4000);
v_cur sys_refcursor;
v_row some_type;
begin
if :P12_QUERY == 1 then
v_query := 'select ....';
else if :P12_QUERY == 2 then
v_query := 'select ....';
end if;
open v_cur for v_query;
loop
v_row := some_type(null, null, null);
fetch v_cur into v_row;
exit when v_cur%notfound;
pipe row (v_row);
end loop;
close v_cur;
end;In interactive report you have to set query:
select * from table(choose_query(:P12_QUERY ))
Best Regards, Kostya Proskudin

How to execute multiple queries in one stored procedure.

Hi,
I am Kumar,
How to execute multiple queries in one stored procedure.
here is the my requirements,
1. get the max value from one table and sum of the that value.
2. insert the values and also sum of the max value.
using stored procedure
I am using SQL server 2000 database.
Please help me.
Advance thanks
by,
Kumar

This is not a java question and it is not even a problem: your only problem is
1) lack of knowledge
2) lack of interest to find a manual
But you are going to have to change both by actually reading a book or a manual that explains the stored procedure language of SQL Server. It is the same as Sybase I think, so you could also look for a manual for that DBMS.

Bursting a report with multiple queries

Hi,
I need to set-up bursting in BIP for a report with multiple queries. The output format is pdf and delivery is through e-mail. Since the queries need to be linked, I'm trying to do this using data template. I've set-up split and burst based on a field (store_id) from the first query which is used as a bind variable in the subsequent queries. So I'd ideally want the report to be split based on store_id. The report works fine if I use a parameter for store_id and view the output by store_id. When I try to schedule the report for bursting, it generates and e-mails the reports but only the last report appears to have correct data output while the others have only the output from the first query (and all other queries appear to return nothing in the report).
Any suggestions on what could be the issue here? Thanks!
Here is the data template for the report:
<dataTemplate name="Report" description="Report" dataSourceRef="ReportDB">
<dataQuery>
<sqlStatement name="STORE_VENDOR">
<![CDATA[SELECT STORE.STORE_ID Q1_STORE_ID, VENDOR.VENDOR_ID Q1_VENDOR_ID, VENDOR.VENDOR_DESC Q1_VENDOR_DESC, PERSON.NAME Q1_NAME
               FROM STORE, SERVICE_TICKET, VENDOR, ROLE, ROLE_TYPE, PERSON, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET.SOURCE_ID = VENDOR.SOURCE_ID AND SERVICE_TICKET.VENDOR_ID = VENDOR.VENDOR_ID)
               AND (STORE.SOURCE_ID = ROLE.SOURCE_ID AND STORE.STORE_ID = ROLE.STORE_ID)
               AND (ROLE.SOURCE_ID = ROLE_TYPE.SOURCE_ID AND ROLE.ROLE_TYPE_ID = ROLE_TYPE.TYPE_ID AND ROLE_TYPE.TYPE_DESC = 'PIC')
               AND (ROLE.SOURCE_ID = PERSON.SOURCE_ID AND ROLE.PERSON_ID = PERSON.PERSON_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               GROUP BY STORE.STORE_ID, VENDOR.VENDOR_ID, VENDOR.VENDOR_DESC, PERSON.NAME
               ORDER BY STORE.STORE_ID]]>
</sqlStatement>
<sqlStatement name="WO">
<![CDATA[SELECT STORE.STORE_ID Q3_STORE_ID, 'Nightly Cleaning' Q3_NIGHTLY_CLEANING, 'Nightly Cleaning' Q3_DESCRIPTION, SERVICE_TICKET.TICKET_ID Q3_TICKET_ID, TO_CHAR(SERVICE_TICKET.END_DATE, 'MM/DD/YYYY') Q3_END_DATE, 'Excellent' Q3_QUALITY_RATING_1, 'Satisfactory' Q3_QUALITY_RATING_2, 'Unsatisfactory' Q3_QUALITY_RATING_3
               FROM SERVICE_TICKET, STORE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4']]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_1">
<![CDATA[SELECT STORE.STORE_ID Q4_STORE_ID, ZONE.ZONE_DESC Q4_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q4_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q4_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q4_WO_END_DATE, 'Excellent' Q4_QUALITY_RATING_1, 'Satisfactory' Q4_QUALITY_RATING_2, 'Unsatisfactory' Q4_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'ABC'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_2">
<![CDATA[SELECT STORE.STORE_ID Q5_STORE_ID, ZONE.ZONE_DESC Q5_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q5_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q5_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q5_WO_END_DATE, 'Excellent' Q5_QUALITY_RATING_1, 'Satisfactory' Q5_QUALITY_RATING_2, 'Unsatisfactory' Q5_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'XYZ'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_3">
<![CDATA[SELECT STORE.STORE_ID Q6_STORE_ID, ZONE.ZONE_DESC Q6_ZONE_DESC, 'Excellent' Q6_QUALITY_RATING_1, 'Satisfactory' Q6_QUALITY_RATING_2, 'Unsatisfactory' Q6_QUALITY_RATING_3, 'One' Q6_QTY_MISSING_1, 'Two' Q6_QTY_MISSING_2, '3 or More' Q6_QTY_MISSING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'PQR'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TYPE.TYPE_ID]]>
</sqlStatement>
</dataQuery>
<dataStructure>
     <group name="G_STORE_VENDOR" source="STORE_VENDOR">
          <element name="Q1_STORE_ID" value="Q1_STORE_ID"/>
          <element name="Q1_VENDOR_ID" value="Q1_VENDOR_ID"/>
          <element name="Q1_VENDOR_DESC" value="Q1_VENDOR_DESC"/>
          <element name="Q1_NAME" value="Q1_NAME"/>
     </group>
     <group name="G_WO" source="WO">
          <element name="Q3_NIGHTLY_CLEANING" value="Q3_NIGHTLY_CLEANING"/>
          <element name="Q3_DESCRIPTION" value="Q3_DESCRIPTION"/>
          <element name="Q3_TICKET_ID" value="Q3_TICKET_ID"/>
          <element name="Q3_END_DATE" value="Q3_END_DATE"/>
          <element name="Q3_QUALITY_RATING_1" value="Q3_QUALITY_RATING_1"/>
          <element name="Q3_QUALITY_RATING_2" value="Q3_QUALITY_RATING_2"/>
          <element name="Q3_QUALITY_RATING_3" value="Q3_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_1" source="SERVC_TYPE_1">
          <element name="Q4_ZONE_DESC" value="Q4_ZONE_DESC"/>
          <element name="Q4_SERVICE_COST" value="Q4_SERVICE_COST"/>
          <element name="Q4_TICKET_ID" value="Q4_TICKET_ID"/>
          <element name="Q4_WO_END_DATE" value="Q4_WO_END_DATE"/>
          <element name="Q4_QUALITY_RATING_1" value="Q4_QUALITY_RATING_1"/>
          <element name="Q4_QUALITY_RATING_2" value="Q4_QUALITY_RATING_2"/>
          <element name="Q4_QUALITY_RATING_3" value="Q4_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_2" source="SERVC_TYPE_2">
          <element name="Q5_ZONE_DESC" value="Q5_ZONE_DESC"/>
          <element name="Q5_SERVICE_COST" value="Q5_SERVICE_COST"/>
          <element name="Q5_TICKET_ID" value="Q5_TICKET_ID"/>
          <element name="Q5_WO_END_DATE" value="Q5_WO_END_DATE"/>
          <element name="Q5_QUALITY_RATING_1" value="Q5_QUALITY_RATING_1"/>
          <element name="Q5_QUALITY_RATING_2" value="Q5_QUALITY_RATING_2"/>
          <element name="Q5_QUALITY_RATING_3" value="Q5_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_3" source="SERVC_TYPE_3">
          <element name="Q6_ZONE_DESC" value="Q6_ZONE_DESC"/>
          <element name="Q6_QUALITY_RATING_1" value="Q6_QUALITY_RATING_1"/>
          <element name="Q6_QUALITY_RATING_2" value="Q6_QUALITY_RATING_2"/>
          <element name="Q6_QUALITY_RATING_3" value="Q6_QUALITY_RATING_3"/>
          <element name="Q6_QTY_MISSING_1" value="Q6_QTY_MISSING_1"/>
          <element name="Q6_QTY_MISSING_2" value="Q6_QTY_MISSING_2"/>
          <element name="Q6_QTY_MISSING_3" value="Q6_QTY_MISSING_3"/>
     </group>
</dataStructure>
</dataTemplate>

Hello user6428199,
When you use ":Q1_STORE_ID" in your queries, BI Publisher looks for a report parameter named Q1_STORE_ID. Change all your report queries to get data for all the store_id's available. As you are bursting the report using the store_id as the bursting key, BI Publisher will split the report based on the stored_id and delivers content based on it. No matter how many queries you may have, BI Publisher will loop through all the store_id's available and all the queries will return data for that particular id in a report.
Thanks,
Machaan

Multiple queries with 1 connection

Can I execute multiple queries with one connection?
//Example -
<%
String firstconn;
Class.forName("org.gjt.mm.mysql.Driver");
// create connection string
firstconn = "jdbc:mysql://localhost/profile?user=mark&password=mstringham";
// pass database parameters to JDBC driver
Connection aConn = DriverManager.getConnection(firstconn);
// query statement
Statement firstSQLStatement = aConn.createStatement();
String firstquery = "UPDATE auth_users SET last_log='" + rightnow + "'WHERE name='" + username + "' ";
// get result code
int firstSQLStatus = firstSQLStatement.executeUpdate(firstquery);
// close connection
firstSQLStatement.close();
%>
Now, instead of building a new connection for each query, can I use the same connection info for another query?
if so - how do you do this?
thanks for any help.
Mark

Create multiple statement objects from your connection. It's a good idea to close these in a finally block after you're done with them
Connection conn = null;
Statement stmt1 = null;
Statement stmt2 = null;
try {
    conn = DriverManager.getConnection();
    stmt1 = conn.createStatement();
    // some sql here
    stmt2 = conn.createStatement();
    // some more sql here
} finally {
    if ( stmt1 != null ) stmt1.close();
    if ( stmt2 != null ) stmt2.close();

Can we use multiple queries on one template

Can we use multiple queries on one template

Hi,
if you're using data templates for your data set, you
can put multiple queries in the XML data template.
The queries may then be linked (or not) by the "link
name" tag ...
Grtz.Following you answer here...do you know eventually how/if possible to preview a report (with XMLP Desktop) that is using data templates for the data set?
Thanks,
Liviu

Multiple queries in a single report?

I'm having some issues with the ColdFusion Report Builder...
I have a database table called "Items" that includes fields
for Reviewer and Status. I want to create a report that will list a
reviewer, then express the number of items where the Status is
"open" as a total or record count. I want to do the same for total
items, and then express the number of "open" items as a percentage.
For example:
REVIEWER, OPEN ITEMS, TOTAL ITEMS, PERCENT OPEN
John Doe, 10, 20, 50%
Jane Smith, 15, 60, 25%
...and so on.
So far I've only been able to get my report to display the
recordcount of the entire query. In order troubleshoot the problem
I created a regular cfm page to do the same thing. Here's what I
did:
<cfquery name="getreviewers"
datasource="#APPLICATION.datasource#">
SELECT DISTINCT Reviewer
FROM Items
ORDER BY Reviewer
</cfquery>
<cfoutput query="getreviewers">
<cfquery name="getopenitems"
datasource="#APPLICATION.datasource#">
SELECT Status
FROM Items
WHERE Status='open'
AND Reviewer = '#Reviewer#'
</cfquery>
<cfset open = getopenitems.recordcount>
<cfquery name="getallitems"
datasource="#APPLICATION.datasource#">
SELECT Status
FROM Items
WHERE Reviewer = '#Reviewer#'
</cfquery>
<cfset all = getallitems.recordcount>
<cfset percent = (open / all) * 100>
#getreviewers.DR_Item_Reviewer#, #open#, #all#,
#Round(percent)#%
</cfoutput>
That worked great, but as you can see I had to nest a couple
of queries inside a <cfoutput>. I don't know how to
incorporate this into the report builder, as it seems you can only
specify a single query. Another thing that occurs to me is perhaps
I'm going about this the wrong way. Is there perhaps a function
that will display things the way I want them without fussing with
multiple queries? Any help would be greatly appreciated. Thanks in
advance.

It seems like you are trying to do a subreport. You can nest
reports within the report feature...just check out the subreport
feature under the help section. If that doesn't help let me
know.

How do I display data from Multiple Queries in a spreadsheet?

I am running Oracle forms 10g as a kicker to export a report (rdf 10.1.2.0.2) to PDF or Excel Spreadsheet - User's choice.
Doesn't matter if I have desformat = SPREADSHEET, DELIMITEDDATA, or DELIMITED; I still get only the first query displayed when I run in spreadsheet format.
How do I display data from Multiple Queries in a spreadsheet? Is this possible?
Thanks in advance!

Hi adam,
did you search the forum? You will find a lot of threads handling the problem of Excel file access.
In short: you need to use ActiveX (the RGT also uses ActiveX under the hood)!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

BI Publisher Report in Oracle Apps 11i having multiple queries.

Hi,
I would like to know whether it is possible to have multiple queries in a data definition File.
QUERY1 - To find the last run date of a particular concurrent program
SELECT   max(fcr.request_date) last_run_date
   FROM     apps.fnd_concurrent_requests    fcr,
            apps.fnd_concurrent_programs fcp,
            apps.fnd_concurrent_programs_tl fcpt
   where    fcr.concurrent_program_id = fcp.concurrent_program_id
   and      fcp.concurrent_program_id = fcpt.concurrent_program_id
   and      fcpt.user_concurrent_program_name = 'Get Transfer Alert Details'Now based on the last run date value I will have my main query Query 2
QUERY 2-------------------------
select to_char(psah.creation_date,'DD-MON-YYYY HH24:MI:SS') appr_date,
       (select papf.full_name
          from per_all_people_f papf ,
               fnd_user fu
         where 1 = 1
           and fu.user_name = psah.user_name
           and papf.person_id = fu.employee_id
           and papf.current_employee_flag = 'Y'
           and trunc(sysdate) between effective_start_date and effective_end_date ) bu_hr_appr,
       papf.full_name emp_name,
       papf.employee_number emp_num,
       (select hoin.org_information3||'.'|| hoin.org_information5
          from hr_organization_information hoin
         where 1 = 1
           and hoin.organization_id = to_number(xxc_hr_ocsi_pkg.GET_TXN_VALUE(psah.approval_history_id,psth.transaction_history_id,'ASSIGN','P_ORGANIZATION_ID','NEW'))
           and hoin.org_information_context = 'Company Cost Center' ) nbucc,
       (select hoio.org_information3||'.'|| hoio.org_information5
          from hr_organization_information hoio
         where 1 = 1
           and hoio.organization_id = to_number(xxc_hr_ocsi_pkg.GET_TXN_VALUE(psah.approval_history_id,psth.transaction_history_id,'ASSIGN','P_ORGANIZATION_ID','OLD'))
           and hoio.org_information_context = 'Company Cost Center') obucc,
       papf_hr.full_name hr_name,
       papf_hr.email_address hr_mail,
       papf_cre.first_name cre,
       papf_cre.email_address cre_email,
       DECODE(xxc_hr_ocsi_pkg.GET_TXN_VALUE(psah.approval_history_id,psth.transaction_history_id,'SAL','P_ATTRIBUTE_CATEGORY','NEW'),
              'Commission Sales Plan',
       (select flv.meaning
          from fnd_lookup_values flv
         where 1 = 1
           and flv.lookup_type = 'XXHR_ANNUAL_COMMISSIO_PLAN_TYP'
           and flv.enabled_flag = 'Y'
           and flv.lookup_code = xxc_hr_ocsi_pkg.GET_TXN_VALUE(psah.approval_history_id,psth.transaction_history_id,'SAL','P_ATTRIBUTE1','NEW')),'NA') csp,
       to_char(trunc(sysdate),'DD-MON-YYYY HH24:MI:SS') current_date,
       fnd_global.conc_request_id request_id,
       psth.last_update_date
from apps.pqh_ss_transaction_history psth ,
       apps.pqh_ss_approval_history psah,
       apps.per_all_people_f papf ,
       apps.per_all_assignments_f paaf,
       apps.per_all_people_f papf_cre,
       apps.per_all_people_f papf_hr
where 1 = 1
   and psth.process_name = 'HR_TRANSFER_JSP_PRC'
   and psth.transaction_history_id = psah.transaction_history_id
   and psah.action = 'APPROVED'
   and psah.creation_date = (select max(psah1.creation_date)
                               from apps.pqh_ss_approval_history psah1
                             where 1 = 1
                                and psah1.transaction_history_id = psah.transaction_history_id
                                and psah.action = psah1.action
                                and psah.approval_history_id = psah1.approval_history_id
   and (select count (1)
          from apps.pqh_ss_approval_history psah
         where psah.transaction_history_id = psth.transaction_history_id
           and action = 'APPROVED'
       ) > 1
   and psah.approval_history_id = (select max(psah1.approval_history_id)
                                     from pqh_ss_approval_history psah1
                                    where 1= 1
                                      and psah1.transaction_history_id = psah.transaction_history_id
                                      and psah1.action = psah.action
   and psth.selected_person_id = papf.person_id
   and papf.current_employee_flag = 'Y'
   and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
   and papf.person_id = paaf.person_id
   and paaf.primary_flag = 'Y'
   and paaf.assignment_type = 'E'
   and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
   and to_number(paaf.ass_attribute7) = papf_hr.person_id
   and trunc(sysdate) between papf_hr.effective_start_date and papf_hr.effective_end_date
   and psth.creator_person_id = papf_cre.person_id
   and trunc(sysdate) between papf_cre.effective_start_date and papf_cre.effective_end_date
   and psth.last_update_date > :last_run_dateEdited by: 936671 on Jul 2, 2012 4:09 AM

For examples and details please refer to the Guide: http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T434255.htm
Specifically, look for the following chapters
The Data Template Definition
How to Define a Data Link Between Queries

Report with Multiple queries too slow in BI Publisher 11g

Hi, I have a report in 11g where i need to create multiple queries to show them in report. I tried to combine everything in one query, but i found that the query is too huge and hard to understand and maintain. I created 3 data sets and linked them together. In SQL dev, the main query is returning about 315 records and first detail query returns less than 100 records and second detail query is returning one record which is BLOB. Each query returns data within a couple of seconds from SQL Developer. The entire report from BI Publisher should be just 21 page PDF output. Did anyone face performance issues while running reports with multiple queries in 11g? I ran reports that have single query which returned 10K pages PDF and never had an issue while everthing is in one query. This is the first time Iam attempting to create multiple queries. Can someone help me understand what i might be doing wrong or missing here. Thank you.

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

Question about templates with multiple queries

I am just starting out with BI Publisher, v.10.1.3.2. I have a report that has multiple queries, but my template is just based on 1 query. How can I make the template use more than one query?
Thanks!!



<dataTemplate name="dataTemplateName" description="DESCRIPTION" dataSourceRef="ORCL" defaultPackage="<SCHEMA>.<PACKAGE>" version="1.0">
<properties>
<property name="include_parameters" value="True|False"></property>
<property name="include_null_Element" value="True|False"></property>
<property name="xml_tag_case" value="upper|lower"></property>
<property name="db_fetch_size" value="500"></property>
<property name="scalable_mode" value="on|off"></property>
<property name="include_rowsettag" value="true|false"></property>
<property name="debug_mode" value="on|off"></property>
</properties>
<parameters>
<parameter name="IDENTIFIER" dataType="character|date|number" defaultValue="0" include_in_output="true|false"></parameter>
</parameters>

<lexicals>
<lexical></lexical>
</lexicals>
<dataQuery>
<xml name="xml_query_name" expressionPath="Xpath_expression">
<url method="GET|POST" realm="auth_name" username="" password="">file:///d:/windir/filename.xml</url>
</xml>
<sqlStatement name="query_name">
<![CDATA[
SELECT
FROM
WHERE
]]>
</sqlStatement>
</dataQuery>




<link parentQuery="parent_query_name" parentColumn="col" childQuery="child_query_name" childColumn="col" condition="= < <= > >="></link>
<dataTrigger name="beforeReport" source="<package_name>.<function_name>"></dataTrigger>




<dataStructure>
<group name="group_tag_name" source="query_name" groupFilter="<package_name>.<function_name>">
<element name="tag_name" value="source_column" function="SUM() COUNT() AVG() MIN() MAX()"></element>
<element name="tag_name" value="<group_name>.<column/alias name>" function="SUM() COUNT() AVG() MIN() MAX()"></element>
<group name="group_tag_name" source="query_name" groupFilter="<package_name>.<function_name>">
<element name="tag_name" value="source_column" function="SUM() COUNT() AVG() MIN() MAX()"></element>
<element name="tag_name" value="<group_name>.<column/alias name>" function="SUM() COUNT() AVG() MIN() MAX()"></element>
</group>
</group>
</dataStructure>
<dataTrigger name="afterReport" source="<package_name>.<function_name>"></dataTrigger>
</dataTemplate>

Moving multiple queries from one category to another in QM

Hi All,
Is there is any way of moving multiple queries from one category to another in the query manager?
Or is the only way of doing it by saving each one individually into a different category.
Any ideas ?
Regards,
Rakesh N

Hi Rakesh,
The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
Thanks,
Gordon

Order of the Merged Prompts with Multiple Queries

Hi,
I have a WEBI XI 3.0 document that contains multiple queries.
One of the queries in the document has the following prompts in this order:
"Date:"
"Time:"
"Time zone:"
"Address:"
Another query in the document has the following prompts in this order:
"Date:"
"Time:"
"Name:"
"Address:"
If I do a Refresh All in the document, the prompts are merged and displayed in the following order:
"Date:"
"Time:"
"Time zone:"
"Address:"
"Name:"
However, I want "Address:" to be the last prompt displayed:
"Date:"
"Time:"
"Time zone:"
"Name:"
"Address:"
Is there a way to specify the order of the merged prompts?

Hi,
To define the particular order of the prompts all the prompts should be at the universe level or at the report level.
As all the prompts defined at the universe level will appear first in alphabetical order and then the report level prompts will appear also sorted alphabetically.
In your case if possible create the prompt of Address at the report level and other prompts at the universe level it will automatically appear as the last one when you refresh all the queries.
Else you can change the prompt string to define the particular order.
@Prompt('1. Enter Date'.....)
@Prompt('2. Enter Time'.....)
@Prompt('3. Enter Time Zone....)
@Prompt('4. Enter Name'....)
@prompt('5. Enter Address'...)
Note: All the above prompts should be created either at the report level or universe level.
Regards,
Rohit

Multiple Queries in a workbook

Hi Gurus
If we have multiple queries in a workbook in 3.5 version and when we upgrade it to BI 7.0 version the data got overwrited........ (I heard this scenario from my friend)
But how to solve this kind of scenario. Does scrolling option works... Please give me some suggestion how to solve this kind of issue
Regards
Naga

A 3.x workbook when opened in 7.0 works fine except for some issues. Variables are shown in text element of 3.x workbook , when this workbook is opened in 7.0 the variables are also shown. By design text element does not show variables except for text variables. There are issues like flickering of workbook when opening the 3.x workbook in 7.0. Variants from 3.x are not imported in 7.0.
check this out.

Multiple queries

Similar Messages

Maybe you are looking for