Multiple Quizzes with multiple results (in Captivate 6)

Hey guys, Thanks for reading!
Does anyone know if it is possible to do multiple tests with multiple results in captivate 6? or if it is possible to have a pre-test with a quiz, and have separate results for each?
I've been having a play with captivate 6 and when I put a quiz in, it overrides the results slide for my pre-test.
Looking at the results slide master properties I can choose to have results for one of my quizzes but not both (even on separate slides):
It wont even let me insert another slide based on the other result.
I would like to know if multiple quizzes with multiple results is possible in Captivate 6?, or if I am simply doing something wrong?
Thanks!

Sorry for way-late reply...
It's really more how your LMS handles 'courses' and the terminology it uses.
Essentially, most often, a 'SCORM Package' (SCO) is a 'course'. I'd rather call each SCO a 'lesson' as, to me, 'courses' should be setup in the LMS with a series of 'Lessons'.
Regardless of the terminology, each 'SCO' is launched by the LMS and one score can be recorded for it via SCORM.
So if you need multiple final scores recorded, each of those final scores need to be in their own SCO.
A common approach is a Pre-Test SCO (or 'lesson', or 'course', whatever term), a 'Content' SCO perhaps with some interspersed scored interactions, and a Post-Test SCO...all three merged together as a 'course' (or whatever term) within the LMS.
That said, as said, it really all depends on how your LMS handles various SCOs...
Clear as mud?
E

Similar Messages

How can I make multiple quizzes with their own results slides within one project of Captivate 7?

In one Captivate 7 project I want to create multiple quizzes with their own results slide.
Currently I have 5 quizzes that all are linked to 1 results slide.
Is there a way to give each set of questions their own results slide?
(I saw a response to a similar question for Captivate 5 from 2012, but I couldn't get much use out of is and I figured there was an easier way in Captivate 7).
Any help would be appreciated!
Thanks!

Thanks for the reply Lilybiri!
I checked out the link and it's useful, however your other plan might work better for me:
Either you link to separate CP-files that have each their quiz, or you can show intermediate results slides (see link below), but you have to know that the score that will be transmitted to a LMS is the total score of all the quizzes.
But how exactly do I link separate CP-files? Do I have to publish them first and then link them, or can I link them before I publish?
If you could shoot me a link or some advice I'd greatly appreciate it. I'm finishing up a huge project that is due at the end of the day and this quiz issue is one of the last things keeping me from being finished.
Thanks!

Multiple Macs with multiple user accounts

I have a Mac computer connected to airport and use Time Machine for backups. This works well.
I have now purchased a second Mac and would like to include this second Mac so that I can move between Macs and work. There does not appear to be any mechanism to allow this.

After searching the web and the discussion here, here's my minimal impact solution for multiple Macs with multiple users in a household:
1) Set up Mac1 for myself only
2) Set up Mac2 for the wife and kid
3) Set up each Mac to backup to the Airport base station using Time Machine (this would create two separate backups on the Airport base station's drive, which from what I've read has its own problems)
4) On Mac1 setup "empty user accounts" for the wife and kid. These will not have any files in them - just an access mechanism. If they want to access their files, they can use Time Machine's "The Browse Other Backup Disks Option" to get their file from Mac2, work on it and then drop it in the Shared Folder. Next time they are on Mac2, remember to copy the updated/created file from the Shared Folder into their Mac2 user account. If possible, get Time Machine to not backup the "empty user accounts".
5) Do the same for me on Mac2.
Not the most elegant solution, but until Apple get off their backside and make this seamless, I can't think of anything else :-( .
P.S. iCloud is not a soluton since it costs hundreds of dollars a year, uses up intenet data allowance and is slow.

Single Update command to update multiple rows with multiple rows

Hi Gurus!
Can I update table A with a result set of table b (multiple rows returns) where a.c1 = b.c1
regards,
SH

As Joel mentioned this update will update all rows in a table based on another one:
update tableA set seq_no = (select seqno from tableB where tableA.ID = tableB.ID)
Also, any rows that don't match the select criteria will get updated to null. This could be very bad depending on what you want to do.
To update a subset of tableA with data from tableB:
update tableA set seq_no = (select seqno from tableB where tableA.ID = tableB.ID)
where exists (select 1 from tableB where tableA.ID = tableB.ID)

Would like assistance with multiple devices with multiple iTunes accounts syncing on one PC

I have had an iPhone for some years now and have been syncing with my PC without issue (first with iPhone 3gs and now with iPhone 4s). My wife bought me an iPad 3 retina in December 2012 which syncs with the same PC as my phone and shares the same iTunes account. Apps downloaded onto one device are automatically downloaded to the other, iMessages are sent and received to both devices also.
My Wife now has an iPad mini with retina (using her own existing iTunes account which she previously used for an iPhone she no longer uses). I synchronised her new iPad mini with my PC assuming iTunes would manage the device and related account and contents separately to my existing account and 2 devices. However this has caused an issue with the sharing of apps. Since doing so I have started seeing updates available on my devices for apps which I have never downloaded, but my wife has. If I tell my iPad to update said apps, I am asked for my Wife's iTunes account password.
On doing some searching via google I now understand that I should have created a second windows profile on my PC for my wife and installed iTunes onto this profile for the purposes of syncing her device.
I would very much like to do this, but would like some assistance on the best course of action for doing so. If I proceed and created a second profile and sync her device to this, I presume I would need to tell iTunes to treat her iPad as a new device (and wonder what would happen to her existing content)? Assuming we do this, I presume the issue of my seeing her app updates would still persist?
Could someone advise if they have any experience with similar issues/queries?

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

How do set up multiple devices with multiple graphs in labview

Hello,
I am new at LabView, and we are trying to setup a test rig to measure voltage, pressure and flow rates. We are currently using a NI-6009USB box and Labview version 8.2. Our problem lies in setting up the actual measurements on separate graphs. How do i go about setting up the daq-assistant to measure mulitple devices, and graph them on their own graphs? We also need to know how to program in when measuring flow, how to convert it from square wave form to a calibrated curve?
Any help would be greatly appreciated!
Nate

When you configure the DAQ Assistant, you will be first asked to select the measurement type. Assuming that you have voltage sensors because you have the 6009, you select Analog Input>Voltage. You then get a list of devices. Since you only have one, it should be listed as Dev1. Expand that and then pick the channels you have connected to the sensors. Just like it says at the bottom of the of the channel window, you can select multiple channels with <CTL> or <SHIFT> click. After you've done that, the next window is where you select your sample rate, number of samples, etc. You can also select a custom scale for each channel. This is where you would enter any formula you have from the sensor vendor in order to convert a voltage reading to scaled units.
The output of the DAQ Assistant is a dynamic data type. You can wire this to a single graph to display all readings together or use the Split Signals function to break out individual channels for separate graphs.
Message Edited by Dennis Knutson on 02-22-2007 03:33 PM
Attachments:
Split Signals.PNG ‏4 KB

Multiple iPods with Multiple computers

I have two iPods and each syncs with a different machine. Each has a unique music library. What would happen if I switched iPods. i.e. plugging two different iPods into one machine? Will they somehow merge the libraries, or will iTunes just complain that I'm confused.
Thanks,

Have a look at this article: How To Use Multiple iPods with One Computer
Also, before you connect an iPod that is currently linked to a different library, read this one: Using iPod with Multiple computers

Issues with multiple Files with multiple subdbs on a single environment.

I'm having an issue with Berkeley DB 4.2 on 32-bit platforms, regarding multiple physical files with multiple subdatabases in a single database environment. Specifically, when I open a subdatabase for a physical file, Berkeley DB thinks that it is using the same subdatabase in a different physical file.
I'm doing the following:
1. Create and open a db enviornment.
2. Move file1 to the common area.
3. Open, get and close the subdatabases in file1.
4. Move file2 to the common area.
5. Open, get and close the subdatabases in file2.
6. remove file2 from the common area
7. Move file3 to the common area.
8. Open a subdatabase from file3. About 1/2 the time, the fetches
return data from file2, not from file3.
It's possible that at some earlier time (i.e. before step 1 of this
test case), file1, file2 and file3 were the same file. I noticed
that there is something called env->fileid_reset, but that is not
in 4.2.52.
Any ideas?

Looks like I've resolved the issue

Help with multiple contacts with multiple phone numbers

I'm fairly new to the iPhone so thanks in advance for any help with this issue.
I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number. Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number.
I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens), the ringtone I created for that name & number helpfully lets me know who & where their calling from. It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time, but if their calling from work then I need to get back to them quickly.
This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time. My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone. Am I missing something here? I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
Thanks in advance.
Al

https://discussions.apple.com/message/18271382#18271382

Multiple SSID With Multiple VLANs configuration on Cisco Aironet APs: Assotiated clients cannot obtain IP addresses

Hi Surendra,
I was just given this task to see how i can configure a second ssid for guest access in our environment.
this is our network setup prior to this request: Internet----Firewall (not ASA)---ce520---C1131AG and CME router is also connecting to the ce520 switch. we only have two vlans: one for voice and two for data.
Presently, there is no vlan configured on the AP because it on broadcasting ont ssid and wireless users gets IP from a windows DHCP server on the LAN. the configuration on the ce520 switch port for the AP and other switches say access vlan is the DATA vlan which automatically becomes the native vlan for all trunk port connecting the AP and other Stiches to the network.
Now with this new requirement, i have made my research and i have configured the AP to broadcast both the production and the guest Vlans. The two vlans are 20-DATA and 60-Guest. I made the DATA vlan on the AP the native vlan since the poe switch is using the DATA vlan as native on the trunk ports. I configured the firewall to serve as DHCP server for the guest ssid and i have added the ip helper-address on the guest vlan interface on all switches while the windows server remains the dhcp server for the production DATA Vlan. I have confirmed that the AP, switches can ping the default gateway of the guest dhcp server which is another interface on the firewall. I can now see and connect to all broadcasted ssids but the problem is I am not getting IP addresses from both the production dhcp server and guest dhcp server when i connected to the ssid one at a time.
My AP config is attached below.
Please tell me what am I doing wrong.
Do i need to redesign the whole network to have a native vlan other nthan the data vlan?
Does the access point need to be aware of the voice vlan?
Do the native Vlan on the AP need to be in Bridge-group 1 or can i leave it in bridge-group 20?
I will greatly appreciate your urgent response.
Thanks in advanced.

Hi,
As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
int vlan 20
ip helper-address 192.168.33.xxx
int vlan 60
ip helper-address 130.20.1.xxx
I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
Modify the AP config as below since you are using data vlan as the native vlan
interface Dot11Radio0.20
encapsulation dot1Q 20 native
interface FastEthernet0.20
encapsulation dot1Q 20 native
Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
interface FastEthernet0.20
encapsulation dot1Q 20 native
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60
no ip route-cache
bridge-group 60
no bridge-group 60 source-learning
bridge-group 60 spanning-disabled
Hope this helps.
Regards
Najaf

CP7 quizzes with multiple question banks not working

Hello there
I have worked 2 weeks on creating a quiz to be published in HTML5 and now that I am finally ready to publish it appears that CP7 has a problem when publishing a quiz with all random questions taken from more than 4 question pools.
Up to 3 question pools HTML5 works like a charm but add a 4th one and it all goes to hell.
I have 60 questions taken from 11 question pools and many questions appear blank (just the background appears and the slide keeps going for its 3 seconds untill it automatically jumps to the next question not giving the possibility to answer and therefore scoring it negatively. (the answer all questions is active).
Now if I publish the same project as SWF the quiz has no problems and works just fine but I would really like to be able to have people take the quiz on their iPad and also I was actually going to convert it into an iPad app but that now appears impossible to do.
Is there a solution to the problem? Is CP7 limited to 3 Question Pools when publishing as HTML5?
As usual thanks in advance

Hi there,
During HTML5 publish, are you getting a warning with the text ' There are more random question slides than questions available in the pool...’. If yes, then can you please take the corrective action and see it resolves the issue or not?
In case if you are facing this issue with proper number of question, random question slides, then please share the .cptx file with us so that we can investigate the issue at our end. Please upload it to a shared workspace (Acrobat.com) and send me the link to [email protected]
Thanks,
Nimmy Sukumaran.

Multiple choice with multiple answers

Hello,
I was wondering if someone can help me out. I'm creating a series of tutorials useing Captivate and at the end of each one I want a slide that has the options
a) re-run tutorial (jump back about 100 slides)
b)go to next tutorial (next slide)
c)return to start (jump to slide 1)
I've had a look at the multiple choice questions in Captivate but they only seem to alow you to make one movement with a "correct" answer and I'm looking for more of a navigational tool. Would this functionality be stored under the 'Quiz' section or somewhere else or is this function just not available in this tool?
Thank you very much for your help,
Michelle

Hi there
Notice that with the Multiple Choice question type, when you select one of the possible answers you have an Advanced button that may be clicked. You may then assign a different action for each answer selected. So answer a could jump back 100 slides, answer b could open another project and answer c could perhaps open Google.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Cannot get multiple tabs with multiple web pages

Hi, My plain vanilla firefox browser in Win 8 has stopped giving me multiple tabs when I access more than 1 web url. Before say I access 5 sites, then for each site I get 5 tabs so I can easily switch between web pages. Now they all appear under 1 tab only. Ticking the box in Tools/Options/Tabs/open new window in a new tab instead, doesn't work...very frustrating....any ideas? Many thanks

I'm not sure I understand the change, so let me mention a few things and you can reply with comments and clarifications.
How are you directing links to new tabs: do you use one of these methods?
* right-click > Open Link in New Tab
* Ctrl+left-click
* middle-click (using a mouse scroll wheel)
Other issues:
* Is Firefox's tab bar not showing or behaving strangely? (Please describe in more details if applicable.)
* If the problem is that the Windows Task Bar is not working the way it used to, check the ''last'' setting on the Tabs panel of the Options dialog: "Show tab previews in the Windows Taskbar" to see whether that is what got turned off.
* If the problem is that Google results used to automatically open in a new tab but now they open in the same tab, you need to select "new window" in Google search preferences: https://www.google.com/preferences

Multiple devices with multiple itunes accts on one computer.

my son got an itouch from his dad. My son has his own itunes account. how do I call up his itunes account so that it comes up with I plug his device to my Mac? (right now my itunes account automatically comes up)

you can't do it automatically. you'd need to manually sign out of your iTunes account and in to his.
if you're sharing the computer, see method one in this support article:
How to use multiple iPods, iPads, or iPhones with one computer

Need to find a calendar to schedule multiple assignments with multiple tasks set on specific days for multiple people

There may be no such animal as what I am searching for, but I thought I'd give it a try.
What I need to do is find a calendar app that allows me to have individual calendars for staff members that I can place a several-days-long assignment and have those people access remotely on an iPad or iPhone (autosync).
I also want to be able to have tasks set on specific days within that assignment that have alerts/reminders for each stage of the assignment.
Being able to custom colour each individual assignment (not just the person's own calndar) is also necessary, as these asignments overlap and need to be easily distinguishable at a glance. Each assignment needs to be its own entity and not affect any furture or previous entries, even if I choose the same colour.
It needs to be in a month by month view and be able to be something each person can subscribe to and sync up with for changes on a daily basis. It does nothave to be a calendar like in the screen shot below, it could be a linear calendar that has days across the top and assignments down the left side.....
Here is a screen shot of a rudimentary excel spreadsheet I have been using. It is awkward and becoming unmanageable as the number of assigments increases and more staff are being added on. And I must send a new spreadsheet out every time I make a change or add an assignment, which is several times a week.
I suspect I may be asking for the world, but if anyone knows a direction I can go in to start a search, I'd be grateful. I haven't had success of my own so far and need to find something soon.
iCal doesn't work for me due to the fact I can only colour code the calendar itself and not the event, plus not being able to have multiple tasks within one event. And the qty of assignments I'd have would see most getting lost, eliminating my abilty to see every staff member's assignmanet at the same time.
Thank you in advance if you have a suggestion and if not, thanks for looking at my dilemma!

check with T-code TPM44
zashok

Multiple Quizzes with multiple results (in Captivate 6)

Similar Messages

Maybe you are looking for