Multiple quotation for one sales order

Hi all,
My requirment is to create one sale order that reference from many quotations. From what I try in CRM, when I want to create a follow-up document, I have to start from the quotation and choose create follow-up document then the sale order will be created. However, that's only good for one quotation one sale order.
What I want is to have a sale order that referenced from many quotations, is this possible in CRM?
Thanks in advance for all the helps.

Hi Gilbert,
As u rightly said one quotation one sale order as a folow up.
But u can make use of <b>Object Relationship Profile</b>, to be added in ur transaction type of sales order.
So after creating a sales order in refernce to a quotation, u can add other quotation in the Relationship tab which gets added to the Transaction screen.
This will also update the document flow.
The object Relationship Profile can be added in trnasaction type as well as Item Category.
Regards,
Shalini Chauhan

Similar Messages

Multiple delivery for one Sales Order?

I have been searching for the subject in forum....i dint get any possible answers? So in never the case multiple delivery will be attached to sales order ???
Thanks in advance for your valuable comments...
Thanks
Hari

The same concept told earlier for shipments holds good here.
We can have n number of deliveries for a single sales order.
One of the example is Availiblity check.
If all the items in an SO is NOT confirmed at once, multiple deliveries are to be made for that SO.
So, Depending on the business case, we can have reasons, why an SO can have multiple deliveries.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

Multiple Production ordersfor one sales order.

Hi Gurus,
We have a typical MTO scenario where depending on the requirement, a planned order is converted in to production order using MD04 or using CO08.
But when both are done, system is not throwing any error message or information message that the production order is already raised. Instead both the production orders are raised and in MD04 for one sales order we can find 2 production orders. i.e the required quantity is doubled. Even system is accepting the confirmation of these production orders.
In this case an end user can raise any number of production orders for one sales order using CO08.
Kindly suggest me any settings which could restrict the raise of multiple production orders for one sales order.
Thanks in Advance.
Warm Rgds,
Ganapathi Varma

Hy Ganpathi,
CO08 is manual Creation , so it is difficult to put such a control.Why you are not using sales order ---> Plan order --- >Production order means proper channel of MRP?
Pls try to control it by using Following User Exits.
- PPCO0006 Enhancement to predefine fields in order header
- PPCO0021 Enhancement for Order Release
But I this type of control creates problem when you really required new prod Order due to Malfunction or any other problem earlier order gets stuck up (less yield to complete the sales order)
Regards,
Dhaval

More than 3 AR for one Sales Order in relationship map

Hello,
i would need some advice on the following: If you have more than 3 Invoice for one Sales order these are not shown seperately in the relationship map. SAP could reproduce the issue and refers to it as normal system procedure at the moment. They adviced me to post a thread here.Is there any way you could make the invoices be seen one by one.
SAP Version 8.81 PL 5
Thanks a lot for any advices on this topic
Vanessa
Edited by: Vanessa Schürer on Jan 16, 2012 2:45 PM

Welcome to the forum.
If you have any suggestions you post them on sap's new idea collaboration page. You do bring up a good point and hopefully in 8.82 it will be resolved as the relationship map was not originally on the road map. Hopefully they can develop this feature.

VL10C double delivery notes for one sales order

Dear all,
Currently we encountered an very strange issue in our SAP. we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
does anyone have a clue on this issue? your effort and feedback will be most applicated!
Thanks & Best Regards,
Kyo NG

Hi,
I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
Regards,
Eduardo

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

How the system determines the Requirement type for one sales order

Hi,
SAP-SD Gurus,
Please tell me how the system determines the Requirement type for one sales order?
Thanks & Regards,
Sreenivas.P

Hi,
System follows some search criterial to determine the requirement type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Please check the path
SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
Hope it will clarify
regards,
santosh

Two deliveries required for one sales order

Hello Friends,
I have a quirey , I have two types of goods in one sales order, one is dangerous goods and other one is normal. How ever we are thinking to make two seperate deliveries even they are in one sales order. How can two diff deliveries gets created.
We are planning to create new shipping point with new loading group for the dangerous goods .
Will the above decision works or is there any simplest way to create two auto deliverys for one sales order.
Reg.

Hi all,
I have yet another proposal - using copy control and adding there dangerous goods profile LIPS-PROFL as split criterial. This field is populated originally from material master MARA-PROFL field. You can check for example routine FV50C201. Split criteria are defined in likp-zukrl field.
I think that is better solution then introducing new shipping point. Because there are some determinations and dependencies related to shipping points. So the more shipping points you have, the more additional config you have. If it is needed by business to have separate shipping points - then fine. But if the goods are shipped from the same place, then I would rather modify copy control instead of multiplying config and master data. I say duplicated effort in master data - because with 2 shippiong points you would need to maintain DG profile field and additionally loading group.
Kind regards
Witek Prawecki.

Two invoices for one sales order

I want to create two invoices for one sales order
Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
I would say 10% of 100 $
And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
Both invoices will be relevant of accounting.
Would any body suggest this, how it would be mapped it in to SAP.

Hi Suresh,
It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
Go to IMG-SD-Billing-Billing plan. Do ur own configuration for Billing plan.
Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
Hope this wld help U.
Regards,
Praveen

Two outbound Delivery for one sales order

Hi Experts
I am an Abaper and i have to find the root couse of this problem
problem is two outbound delivery getting generated for one sales order with same no of quantity
Now i am unable to find the approch what can be root cause of this problem , I checked the details of these deliveries these are created by some job , but even in job history any positive solution comeout,
please suggest me what are other ways or causes of this problem

Hi there,
Delivery split will be there is the header data in shipping is different.
For eg of shipping points, delivery dates, ship-to etc are different.
Apart from this in the copy control routines at the headerlevel from OR to LF in VTLA, there might be some customized code written to split the deliveries. Possible conditions could be items from different warehouses / storage locs or if the quantity is more, then a delivery split.
Pls check if there is any customised code written in copy control routines in VOFM.
Regards,
Sivanand

Create 2 different delivery types for one sales order

Hi,
When sales agent is placing sales order at customer site, customer declares as well products or returned packages he would like to return. our business need is to combine all items (return products, return packages and ordered items) into one sales order.
However, we would like to split the sales order into 2 different delivery types. Sales order customizing dictates only one default delivery type per order.
We can set up split criteria via copy control according to item category, but how can we intervene during creation of deliveries and set up a rule to determine different delivery type then default for return items ?
Thanks,
Assaf tzur

Dear Assaf,
Through copy control settings you can create two delivery types for single sales order but you have to select the delivery type manually while creating delivery.
If you want automatic process then you need go for some Zdevelopment with the help of ABAPer.
I hope this will help you,
Regard,
Murali.

Multiple purchase orders for one sales order: ME59

Hi,
I have issue with converting sales order into a purchase order.
A standard third party sales order (type TAS) with multiple line items is being converted to a single purchase order.
In case of a free of charge sales order (type FD) with multiple line items, each line item is being converted to an individual PO.
The difference between TAS and FD is the item catecory and schedule line category.
In both the above cases only one purchase requisition is being created per sales order. The issue is when this PR is being converted to a PO. (ME59 is used to convert the PR).
Is there any setting/config which is driving the multiple PO creation based on either schedule line category or the account assignment category setup in the schedule line category?
Please advice...
Thanks,
KSB

Any ideas?

Availability Check at Multiple Plants for the Sales Order line Item.

Hi Friends,
We are having two plants, Plant A and Plant B. Plant A is used to issue the orders to the vendors and stock them, while Plant B is used to manufacture the Product and Stock.
When we create the sales order, we want to check the Current Stock Plus Incomming Purchase order stock for plant A and also check current stock plus Production orders in plant B.
for ex if the current stock is 100 in Plant A and No physical stock in Plant B but there are some production orders for 400 Qty which will be ready in 1 week.
If i create a sales order for 500 qty which is scheduled for delivery 10 days later. then we want to commit to the customer ( Looking at both the plants stock situation ) the system should check the stock availability for both the plants and automatically create two different line items , Line item 1 for plant A and line item 2 for plant b.
I know there is a user exit for Multiple plant selection USEREXIT_PLANT_SELECTION in program RV03VFZZ. The Description of the USer exit says ( This user exit may be used to provide a list of plants for which availability is to be checked) But we have never used this one. Will this user exit do exactly what i want ??
Did any of you, have used the above User exit in your implementations ? If so please let me know whats the purpose of this user exit
Your reply is much appreciated.
Thanks & Regards
Srinivas

Hi
I dont know about the userexit which you are referring about
But this is not available in R3 The system makes a Availability Check only in the plant which has got determined in the item details shipping tab and stops there
The same is available in APO
If there are 2 plants say 1000 and 2000
In sales order the plant determined is 1000 and there is no stock
In R3 system stops there
But in APO system checks the plant 2000 and if stocks are available it creates an STO in the background automatically from 2000 to 1000 if configured accordingly
Even if the material is maintained in 10 plants the system will make a Availability Check at all 10 plants and act accordingly
Regards
Raja

Multiple deliveries for single sales order

Hi
Please share your thoughts for the following scenario:
A sales order has 10 line items and all schedule lines are confirmed on same date. Now I want to select 4 line items for one delivery and the rest of the line items with another delivery document.
I tried using Delivery groups, but not successful.
Thanks
Suddu

Hi,
Let's say your 10 line items in the sales order are 10, 20, 30, 40... 100.
If you want to deliver first 4 line items you can directly do it using VL01N.
Go to VL01N.
Enter you sales order number.
Under Item section enter "From item" as 10 & "To item" as 40, so that system will automatically select item 10 to 40.
But imagine if you want to deliver 10, 30, 50, 70, then you cannot do that.
If that's the case, go to transaction VL10C.
Give your shipping point & in the sales order tab, enter you sales order number.
Execute.
Now you can see all line items appearing. Mark only those line items & create delivery from there.
Make sure you customer is allowed for multiple deliveries.
You can check that from XD02 / Sales Areas Data / Shipping tab under "Part|al del|very per |tem" field
Best regards,
Anupa

Multiple quotation for one sales order

Similar Messages

Maybe you are looking for