Multiple receivers: but message reaching only 1 : how debug
Hi All,
I am trying to send data-file to 2 different legacy systems using a single incoming idoc. So in my receiver determination I have configured 2 receivers with some conditions based on the idoc segments.
However this message is reaching only 1 receiver( file getting created only for 1). There is no error message that it could not be sent to other receiver.
How do I debug or investigate wheer the problem is?
All I am trying to understand, why isnt the file being created for the second receiver.
Appreciate your help.
Thanks
Shirin
Hi,
I am using File adapter in my comm channel. Using FCC to write the file. Have 2 bussiness services (BS-1 and BS-2) using this comm channel
I checked RWB and all is GREEN. Just that i saw this comm channel name appearing twice as it is assigned to 2 sepaarate Bussiness Services (BS-1 and BS-2).
I also checked in RWB, that this comm channel is picking data for only 1 bussiness service (BS-1). Even after i removed all condition in the receiver determination for (BS-2), no data seems to flow for the Bussiness service BS-2. In this case as theer are no conditions attached data should Have flown, but its not.
What could be the issue ???
Regards
Shirin
Similar Messages
-
Hi,
The pdf file that I am converting has multiple pages but the conversion only exports the 1st page into excel. How do i get the product to include all pages on multiple sheets?Hi christinek,
Can you please tell me how the PDF that you're converting was created? Sometimes, PDF files created by third-party PDF generators (that is non-Adobe applications), don't contain all the tags and file information necessary to ensure a proper conversion to Excel. There are no settings that you can change in ExportPDF to adjust how the file is imported.
You can tell how the PDF was created by choosing File > Properties in Reader and looking for the PDF Producer on the Description tab. If the PDF was created by a third-party, it just may not be written to spec. Please see Support Policy for PDF Files created by non Adobe applications.
Best,
Sara -
SQL Command returns multiple records, but I see only one record in report
I work with Crystal Reports XI R2 SP3 and Oracle 10g R2 database.
I have an SQL Command that returns multiple records. Command name is "CommDivisionNames" and it returns column "CommDivisionNames.DIVISION_NAME". When I place this field into report details section of the report, I can see all 10 records returned and this is how it should be. I actually need this field to be placed in the report header section, and when I place the field there, then I see only the first record. I set that field as "can grow = true". When I do "browse field data" for this field, I see that all 10 records are there, but only the first one is displayed in report header section.
I thought that I can place SQL Command field anywhere on the report (page header, footer, details) and that it will always show all records that it returns from the database. Can that be done?
My "main part" of the report returns different set of records, and that's what I have in "report details" section. I need this list of divisions to be in the report header section, so user can see that the report was executed for DivA, DivC, DivE.
Thank you,
Milansharonamt:
Users select divisions from parameter, but the parameter multi values are division_numbers (1,5,10), not division_names. Division_names are visible in parameter_prompt_window as description, but parameter remembers only numbers and I don't know how I can reuse division_names later in formula.
I do join for division_numbers and make them into one string variable and pass to sub-report, but I think that I can only get these division_names by calling an SQL command or calling stored procedure.
If I try to do join({MySQLcommand.DIVISION_NAME}) I get error message "A string array is required here".
Carl:
I'm playing with cross-tab and I can use it to see all division_names in the report-header section. Since I need them in only one column or only one row, I have to edit cross-tab object and turn all unneeded border lines to white to make them look invisible. So, cross-tab could be a solution for my problem here.
Another option could be to re-write my SQL command. Since I've read here that SQL command could be written in the same way as I would write a stored procedure, then I could use a bit more complex code to get all multiple division names from the database table into a local cursor, and then use do-while loop to concatenate them into one string, and then to return that string as one record (like 'DivA, DivB, DivC'), and then it should not be a problem to display only that one record/string in report header. It is my understanding that Crystal Reports can call stored procedure that works with many cursors/recordsets and CR will use only the last recordset from the stored procedure. Do you think it could be done this way?
Thank you,
Milan -
Hi All,
I have both the iPhone (16Gb 4S) and an iPad (128Gb Retunia display).
My home PC recently failed and I was unable to restore and through some bad luck my backups were rained on and corrupted (I have tried all sorts ot tricks to get it back but no luck and have now moved on to rebulding and regathering the data and applications).
Bottom line is that I have replaced the pld machen wioth a newer model and more RAM, etc.
My problem is that I do not appear to be able typo restore my playlists from my iPad and iPhone to the PC!
Every way I have tried wants to overwrite my iPhone or iPad with what is on the PC!
How can I get the music on my iPad/iPhone to the PC?
I have most of the music tracks (in various places) still but do not want to go through the 6000 tracks IU have to pick out my playlists all over again. That was the work of a few years!
Second item:
I have a few ibooks and am unsure ghopw to get the onto my iPad? ANy hints or help will be appreciated.
Thank you
Dumpy
aka DaveThis explains how to do what you want to do. It was written for an iPhone or an iPod Touch, but the process is the same for an iPad.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141 -
basically what title says ^^^^ it on a iphone 4s
Go to the store in iTunes and in the top right click on your account. You can add or remove payment info there.
-
Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed. How can I combine them to make one album?
First....Thank you so much for your prompt reply. I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved. Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue! I did as you suggested and all the songs list the same album when I go into each song's "get info". However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album. I am trying to consolidate them back into one album in my library. I would greatly appreciate further assistance if you can. Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this. Thanks so much for your patience!
SueZoo -
Yeah I would like to create a Playlist with the by me best rated songs of selected artists i know i can have playlists with multiple artists but that is only possible if i tick match any so that it takes all the songs of those artists and if i select match all there is no song in the playlist...
_bilu_ wrote:
Yeah I would like to create a Playlist with the by me best rated songs of selected artists i know i can have playlists with multiple artists but that is only possible if i tick match any so that it takes all the songs of those artists and if i select match all there is no song in the playlist...
Bilu,
It is a little tricky, but it can be done by using nested rules. The playlist pictured below will do what you want: all songs by the named artists, as long as the song has 4 or 5 stars.
Note: The ellipsis ("...") button is used to nest a rule. It appears automatically on Windows, but on the Mac you have to use the Option key. -
Multiple Receivers one is sync, others async
Hi,
I have a scenario where sender is a third party system.
Sender system sends XML Payload using HTTP to XI.
This payload needs to be received by 3 receivers. 1. File, 2. Email and 3. RFC.
(i.e. Once XML Payload is received into XI, XML File needs to be created, Email needs to be sent with attached XML payload and RFC needs to be called.)
File and Email receivers are asynchronous but RFC needs to be called in synchronous mode and response from RFC is sent back to sender third party system.
Third Party (XML Payload, using HTTP) --> XI --> File, Email, RFC
RFC Response ---> XI --> Third party.
How to achieve this complete scenario? Do I need to use BPM for this? If yes, how do I configure it? Its a case of parallel multiple receivers out of which only one receiver sends response back to the calling system.
Thanks,
SmitaYou need to use bpm.
1. Http Sender sends request to XI.
2. XI converts it into XI Message.
3. BPM receives the request through synchronous interface.(Opens S/A Bridge)
4. BPM sends request to RFC through Synchronous interface and gets the response.
5. Response is sent back to Http Client.(Closes S/A Bridge)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1134http [original link is broken] [original link is broken] [original link is broken]://www.riyaz.net/blog/index.php/2008/04/16/a-step-by-step-guide-to-bpm-asynch-sync-bridge/ -
I have my ipod backed up on multiple computers but only one computershows all my playlists. How can I get all my play lists to show up on multiple computers?
If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
my imessages are being sent on multiple phones and i deleted the icloud account on the other phone but the messages still go through how do I stop this?
Do you think deleting the message off the phone would make a difference?If you don't enter an e-mail address, it just uses SMS and MMS. iMessages (sent over the data connection instead of using your SMS messaging plan) require an e-mail address registered on the device.
There is no requirement that you activate it. -
How to post message to multiple receivers
For a file 2 file scenario how to send a file to multiple receivers and what are the configurations to be done at reciever side
please any body help
Thanks
Pradeep ChakravarthyHi ,
To send messeges to multiple receivers , you need to specify the recivers in the configured receiver of receiver determination in ID. Also you can use the condition to select the different receivers depending upon the successful conditions.
Inside ID :
go to Edit receiver Determination - > Select your Business Service -> enter condition in xpath at configured receivers. and provide you condition in XPATH. You can also use your context variables here to refer to some conditions.
Hope this will help you.
Regards
Aashish Sinha
PS : Reward points if helpful -
Send a message to multiple receivers from the same service
Hi all,
I registered on SAP community several months ago, I found many good hints and solutions to some of the problems encountered in XI and for which I thank you, but this is the first time I address a question to a common issue, written already about.
I have a scenario with 1 File FTP sender adapter and 2 Receiver adapters:1 FTP adapter and 1 MAIL adapter. The input message is sent to one of these receiver adapters based on the value taken by a specific field from the input message.The receiver adapters are using the same party and service.
The requirement is to solve this without using BPM.
I have read "multiple receiver" issue related blogs and tried to use the standard receiver determination. Thus, I have 1 Sender Agreement, 2 Receiver agreements (one for FTP and one for MAIL), 1 Interface Determinations (with the 2 inbound interfaces and interface mappings corresponding to FTP and MAIL output) and 1 standard Receiver Determination where I added the party and service twice and specified for both the condition. The condition is based on XPath, is correct.
In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Can you please give me some feedback on how to solve this problem? It is rather urgent.
I have also tried to create 2 Interface Determinations and have 2 Receiver Determinations, each one with the right condition. But I get the same error message.
Is the problem due to the fact that I don't use 2 different services ?
If you know how this can be solved without using BPM, please reply.
Thanks a lot,
Alina hudea> In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Hi,
I think the problem in Receive Determination. As you mentioned when you remove one of the condition then it works..
What I concluded is, I think while creating your Receiver Determination for multiple receivers you added the receivers by pressing the plus sign and that means you are using mulitiple receivers with "AND" condition, so in this condition when both the condition will be true then only you will get success.
What you can do is, Just remove one of the receivers and then add it by pressing the "OR" symbol i.e. by pressing this ( [ ] ) symbol and put your conditions as you like.
I hope what I have concluded is correct..
Regards,
Sarvesh -
How does receive() work with multiple receivers/subscribers?
Hi,
actually I'm using the JMS API to create a lightweight MQ service for Java ME tailored for my purposes. I'm generally familiar with JMS but I have some question to which I couldn't find the answer neither in the API spec nor on google. I think that many of you can answer it.
At first, is it possible to create multiple receivers on the same queue (same or different sessions)? Generally, I though a queue can only have one consumer since the call of receive() will delete the message from the queue so that a theoretical second consumer couldn't get the message anymore. But int the APi docs, it doesn't explain what happens if you call createReceiver() multiple times. Will it throw an exceptions?
A similar question goes for topics. A topic is supposed to support multiple subscribers. When subscribers register listeners, I understand it. But what if they don't and instead call receive() which is available because TopicSubcriber extends MessageConsumer. Is the message also deleted from the queue or is receive not supported for topics and will throw an exception? Will it remain until all subscribers have either called receive on that message or have been notified by onMessage? If yes, what happens if a subscriber doesn't call receive. Does the message stays there forever? What if new messages coming in, will the queue wait until the previous message is completely consumed?
From my point of view, I tend to only allow one receiver for a queue. If the receiver calls receive, the message will be deleted. For topics, I would only allow listeners, not receive() calls. Once the message has been delivered to all subscribers it will be deleted. If I'm misunderstanding the concepts, please correct me!
Thanks a lot!At first, is it possible to create multiple receivers on the same queue (same or different sessions)? Generally, I though a queue can only have one consumer since the call of receive() >will delete the message from the queue so that a theoretical second consumer couldn't get the message anymore. But int the APi docs, it doesn't explain what happens if you call >createReceiver() multiple times. Will it throw an exceptions?If you have multiple receivers on the same queue then the JMS provider will distribute messages between the two receivers on the basis that each message goes to only one receiver. The exact distribution of messages depends on the JMS provider, and is not mandated by the JMS specification.
A similar question goes for topics. A topic is supposed to support multiple subscribers. When subscribers register listeners, I understand it. But what if they don't and instead call >receive() which is available because TopicSubcriber extends MessageConsumer. Is the message also deleted from the queue or is receive not supported for topics and will throw an >exception? You can consume messages from a topic using either a MessageListener or by calling receive(). They both work in the same way.
Will it remain until all subscribers have either called receive on that message or have been notified by onMessage? If yes, what happens if a subscriber doesn't call receive. Does the message stays there forever? What if new messages coming in, will the queue wait until the previous message is completely consumed?Essentially, if you send a message to a topic then it will be delivered to every subscriber, irrespective of whether that subscriber is synchronous (calling receive() or asynchronous (supplying a MessageListener).
In both cases, the consumer might not actually be ready to accept that message just yet (the applicaiton might not have called receive() yet, or onMessage() is still processing a previous message). In this case the message will be held within the JMS provider in an internal queue of messages designated for that specific consumer. Logically speaking, there's an internal queue for each consumer, rather than an internal queue for the whole topic, though how the provider actually implements this will vary. Note that the concept of each subscriber on a topic having its own internal queue is not one described in the documentation, it's just a way for me to explain it.
If the consumer closes before it actually receives the messages waiting in its queue, and the subscriber is non-durable, then the internal queue will be thrown away. If the subscriber is durable then the internal queue continues to exist and continues to accumulate messages even after the subscriber has closed.
From my point of view, I tend to only allow one receiver for a queue.
If the receiver calls receive, the message will be deleted. For topics, I would only allow listeners, not receive() calls.
Once the message has been delivered to all subscribers it will be deleted. If I'm misunderstanding the concepts, please correct me!Yes, you have slightly misunderstood this :-) I hope my explanation above helps clarify this.
Nigel -
I'm embarassed to ask this: when I click on the new mail icon to write a new email message, in the box "FROM" appears the wrong email address: I have three but mainly use one. How can I correct this so that the right email address appears in the "FROM" box?
I assume this is Apple Mail. Try this:
Preferences > Accounts > your-first-account
Select Outgoing Mail Server of account/name you wish to use and check Use only this server
Repeat for other accounts.
Maybe you are looking for
-
hello everyone, yesterday I bought a mini Displayport to hdmi adapter which I wanted to connect my 21.5 iMac to a Sony bravia hdtv. everything worked fine, beside the fact, that the sony didn't show everything (I had set up 1080p). I used it as first
-
Unable to stream movies after 4.2.1 update
Hi, I updated my Apple TV to 4.2.1 tonight and I've been unable to stream movies from my iMac or iPad to the ATV since then. I can stream music and TV shows but no luck streaming movies to it. I've also tried streaming from my iPad to the ATV and thi
-
In the past I was using Photoshop 7 to make Web Photo Gallery. My friend could right click on the pictures from my website and save it in their computer. Recently I have bought and registered your Lightroom 5 and have updated it to 5.6. But can not p
-
How to make picture change????
My question is that I have a place where I want to put a picture on my webpage. I know how to do that but what if I want the picture to change to a different picture periodically. I have seen this on some pages where when you come back to the webpage
-
Hi, I need to create a measure in a cube that count the number of fact rows where some conditions is meet in a column in the table. My fact looks like this (simplified): Company number Invoiceno number Source varchar2 What I need in my cube is a coun