Multiple registration and fees issue

I have made a registration form for multiple people on one form, however I don't want to make every registration (and related fields) mandatory in case they don't use all the possible registrations. That would require them to fill in something in every field regardless.  However, if they do register someone I want to be sure that the fees are collected for each registration on PayPal.  Is there a way to have all fees "form wide" so it collects each registration fee or do I have to make the payment mandatory for each registration and add a choice for no fee for each registration if not filled out.
Or, a way to tell the form if the registration is filled out it automatically makes the fee choice mandatory and sent to Pay Pal?  Similar to if you ask a question and if no it takes you to the next question relative to that answer.
Any ideas?

I found a work around I only made the first registration required and made a registration fee choice required for each registration.  I did have to add each purchase field for each registration, it wouldn’t add the fee for each person otherwise.  I also had to make sure under the Address Fields that I had the billing name, address etc. checked so it pulled the information for the billing from the correct place.  A bit cumbersome, however it appears to be working as intended.

Similar Messages

  • LR5 registration and catalogue issues

    I just upgraded to LR5 (from LR3) and after the initial set up where LR5 read and updated my LR3 catalogue I closed LR5 and saved the catalog. Now when i attempt to open LR5 it takes me through the registration and serial # dialogue and forces me to create a new catalog rather than use my existing catalog. Furthermore, after registering LR5 several times both in the dialogue that comes up upon opening LR5 as well as online at adobe, my registration doesn't go through. It always says i successfully register and then next time i refresh the page i have "no registered products".

    Hi
    1.)About serial number:
    Maybe you have typed wrong letters. Please take care for O and 0 (zero) or I and l (little L or big i ).
    In my opinion you should try it again and check these possibilities.
    2.)About wireless:
    Well, its not easy to say why it happens. You can try to update the wireless intel driver. Maybe this solves the strange speed changing.
    http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng
    Bye

  • Pavilion dv5 - 1217AX with Windows 8 - multiple booting and crashing issues

    I have a Pavilion dv5 - 1217AX with Windows 8 operating system. It was upgraded from Vista to windows 8 last year and it worked really very well for about 1 year. Here are the issues I am facing these days
    1. When powered on - Caps lock and Num lock LEDs keep flashing twice and the sequence keeps repeating - I checked the error code on some forums and it sounded like BIOS issue so I flashed the BIOS F38 again (SP46501) but it didn't help. I also thought it could be a memory issue so I removed the memory module and cleaned the slots and fixed the modules again but no luck. I also tried running the laptop using only one module, tried both the modules one by but no changes in error code. Then I thought it could be a toy bettery issue so replaced the toy batter that fits on the motherboard but no luck. I have also tried booting up removing the laptop battery pack but no luck.
    So how does it boot now? - Once powered on I keep getting Caps lock Num lock LED flashing issues every time. Then I power off using power on/off button on laptop around 15 times or more then the laptop somehow boots up. There is no fixed pattern, sometimes it boots after 15 attempts, sometimes 50 attempts.
    Whats happenes after booting? - Sometimes the screen goes completely blank without any error message on the screen. Sometimes Windows 8 crashes and laptop restarts, when it restarts I never see LED flashing issues (surprising). It crashes when I am watching some videos or playing some games, so looks like ATI Radeon driver issue (driver is 8.970.100.7000 for HD 3400 display card).
    Let me know if there are any suggestion to fix the botting and crashing issues faced.

    Hi Expertit ,
    At first sight ,seems to be a boot issiu.Did you thry this?
    Booting into the Windows 8 setup, select “Repair your computer” in the bottom part of the window, then “Troubleshoot” and “Advanced options”. Here I was given a good reminder of another cool Windows 8 feature. If you have a restore point created you can go back to that working copy of the OS without losing your data.
    So the first thing you will want to try is the Automatic Repair.
    If that fixes your boot problem, you had it easy and go on to create a restore point for another time you are out of luck. If Windows is unable to fix your issue, read on.
    Go back to the Advanced options and choose the Command Prompt. Going for the next easiest way to fix the problem, enter the following four commands into the prompt:
    bootrec /fixmbr
    bootrec /fixboot
    bootrec /scanos
    bootrec /rebuildbcd
    After receiving a success confirmation. Close the CMD window and restart your PC.
    If you are booted into Windows, excellent! If not, let us know , so we can try some more solutions.
    2.If your video crashes , it is probably wrong Catalyst settings.Right click on screen , open Catalyst control settings , set it to high (Radeon) performance.
    Expecting your next post.
    <<<-------***
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PhotoStream: Multiple Devices and Performance Issues

    Had a bad night last night with PhotoStream. I have an iPhone 4S (AT&T), my wife has an iPhone 4 (VZW), we have an iPad 1 (Wi-Fi), Apple TV 2 (Ethernet), and a 2011 Mac Mini (Wi-Fi)... all in the same house that has a Time Capsule and is connected to AT&T DSL service, 3.0Mbps service (average speed test results are 2.65Mbps down, 315kbps up). Oh yeah, there's a micro-cell in there too but anytime there's trouble that gets shut off first so its irrelevant for this discussion.
    So yesterday was Halloween and we both took alot of photos away from the house with the iPhones. Got home, started using the internet, noticed the performance was HORRIBLE. Speed test showed over 1,000 ms ping latency (I still can't believe I actually waited for it to finish the ping test) and nothing was getting through for the download / upload test. I have never (believe it or not) with AT&T DSL seen it get this bad. Its been bad before, don't get me wrong, but this was surprising even to me.
    How did I come to the conclusion that PhotoStream was my issue you may ask? Well, its sort of a long story, but bear with me... The other day, we started having trouble with the Apple TV 2, which for the most part is pretty solid. My wife was streaming Netflix movies and it was stopping every 30 seconds. It was looking at this issue that had me first raise suspicions about PhotoStream. Just days before this problem started, I had enabled PhotoStream on the Apple TV 2. SO I did the first most logical thing anyone could do, I took a step back and disabled it. Problem solved. Thought nothing of it, yeah I was a little discouraged that I couldn't use it on the Apple TV 2, but not a big deal, my favorite part of PhotoStream is using it to get the photos into iPhoto without having to plug the iPhones in so I said to myself "I'll just keep putting the photos into Events and Albums until they work out the kinks on the AppleTV 2" thinking perhaps the Apple TV 2 needs to not update PhotoStream while videos are being played. They can fix that at some point, right? Sure they can.
    Now, back to this other issue. My bandwidth last night was completely crapped out, and I was determined to prestige on Black Ops one last time so this had to change STAT! I mean, come on! I was at Level 47 and I was ready to GO! My internet connection just wasn't having it. I powered off the router, rebooted the modem, and powered on the rotuer again. Everything came up beautifully. I jumped into some Nuketown 24/7, 4 green bars next to my name and I was happy. After we lost Bravo, which on Nuketown takes about a minute and a half if both teams are fighting over it, I'm lagging like crazy and I have that little red bar that no one likes to see next to my name. Sure enough, speedtest results are all whacked out again.
    So I'm sitting there thinking to myself, what could this be? My wife was watching cable TV, my son was asleep... essentially the Xbox 360 was the only thing trying to use the internet... I thought... until I remembered our iPhones and the photos we had just taken and all the devices that would be simultaneously trying to update PhotoStream. Let's list them again, shall we?
    iPhone 4S - Upload to Stream and Download from Stream
    iPhone 4 - Upload to Stream and Download from Stream
    iPad 1 - Download from Stream
    Mac Mini - Download from Stream
    So how can I prove this crazy theory of mine that the great and wonderful PhotoStream was choking my internet connection? Simple.
    iPhone 4S - PhotoStream OFF
    iPhone 4 - PhotoStream OFF
    iPad 1 - PhotoStream OFF
    Mac Mini - PhotoStream OFF
    Speed test results immediately after doing this?
    2.73Mbps down / .31Mbps up with 26ms ping time (used the Speedtest.NET app on the 4S).
    Sadly, this means that for now, I cannot use PhotoStream, however I did manage to Prestige on Black Ops which made me happy, and the iPhone 4S can still be plugged into the Mac Mini to download my wonderful looking photos.
    That's right, I didn't throw away the charger cables just yet and if you want to start talking about iTunes Wireless Synching with multiple devices in the same house, I can gladly take up some more of your time. Thats right, its OFF as well!

    I just wanted to report that this is still an open and particularly nefarious bug.  I've got a fairly idealized Apple household with 2 iPhone 4's, a 'new' iPad, a 13" Macbook Pro, Airport Express and our most recent addition this weekend... an Apple TV. 
    While I had no particular interest in enabling Photo Stream, I turned it on while messing with the screen saver settings and didn't think anything about it.  As I began to play with my new toy I was immediately disappointed with all the long spinners and timeouts in Netflix.  Later that day I noticed my computer and iPad were having similar connection issues.  My first thought was 'oh, Comcast must be acting up, that's why my new Apple TV isn't working so well'.
    Fast forward 3 days to today and our network issues were still occuring and I decided I needed to figure out what was going on.  After mucking around in network settings for a couple hours I half-jokingly decided to disconnect the AppleTV on the whim that the issues started at the same time I hooked it up.  Sure enough my network issues disappeared.  I even went so far as to run continuous pings to various IP's outside my home network and watch the timeouts come & go as i plugged/unplugged my ATV.  Now knowing the ATV was the problem I set out to figure out what in particular was causing it.  As soon as I signed out of Photo Stream everything was working perfect again.  Netflix on the ATV is quick & responsive, no more spinners or timeouts.  My other devices aren't plagued with random disconnects, dns failures or slow downloads.
    Long story short, something is bugged in AppleTV's Photo Stream support.  Mine didn't appear to be downloading any new photos, it had stopped with 255 photos downloaded.  Not sure if that was all I had in iCloud or maybe AppleTV can only pull down 255 max?  Maybe 255 is the magic number where it hits the bug that causes this behavior?  Either way, it appeared to be only affecting the outgoing internet connection, when I had a continous ping going to another machine on my internal LAN it didn't appear to get affected.
    Hope this helps someone at Apple track down the bug.  While someone technical can probably troubleshoot these issues I could see someone like my mom never putting the 2 + 2 together that her internet problems started around the time she enabled Photo Stream on her AppleTV and instead blaming it on 'the internet acting up again' and of course calling me months later to look into it for her.

  • Integrated ITS: multiple sessions and locking issue

    We are upgrading to ECC 6.0 from 4.6C and have Integrated ITS turned on. We have built a custom PZM3 as one entry and exit point for our ESS services. But we have issues with session management when navigating between some services like PZ14 and PZ02. The PZ14 session and the corresponding lock are not released upon going to the PZ02 service directly. But this happens for only some services. If you navigate between PZ02 and PZ12 it works fine. I followed the instructions of note# 959417, but it didn't work. Not only it is causing locking issues, but also memory usage issues as multiple user sessions are being created on the server. I did check some of posts similar to this one, but the issue still persists.
    Our WAS release: 7.00; ABAP support package: SAPKB70009; Patch level: 75.
    I would appreciate if anyone could shed some light on this issue. Thank you for your time and consideration.
    Kshitij

    Our Basis admin found out that using a parameter ~DISCONNECTONCLOSE = 1 would resolve most of this issues -- and it did. But now we are having issues with some users having popup blockers turned on. We referred to SAP notes 892250/596698-- followed it -- implemented it-- but some users
    still have issues -- like today while working from home via VPN, I am having issues with session management. But working from office yesterday,
    the sessions worked just fine.

  • Multiple queries and formatting issues

    I am running a report with 2 queries in a csv format. It displayed the right format with one query but with the new query , I have all sorts of formatting issues. The data is displayed in random cells. Why would this happen? Any ideas?
    thanks

    Sripathy,
    No, the data is not mixed up. However, the data is displayed in random fashion. Data which should be displayed in one cell, is coming in 2 cells. Sometimes, it is skipping a few cells. It could be due to field widths- I tried changing the widths of the groups in the Data model and also in the layout editor, but nothing has worked so far. Does it not automatically adjust the width depending on the data. I have Vertical elasticity Expand and horizonta Fixed.
    Thanks,
    Srikanth

  • Multiple Crashes and Printer Issues - Help!

    I've been very disappointed in Snow Leopard. On my iMac it is freezing up constantly. I NEVER have to reboot that iMac, and in less than 48 hours since I've installed it, I've had to reboot 5 times . It looks like iPhoto of all things is the program that crashes it - can't really tell. The whole screen freezes, including the doc and all menu bar options. Nothing is clickable, but the mouse still works - but can't click or right click anything. Have to turn off and then back on again to fix it.
    On my MacBook Pro 17", I have the latest Final Cut Studio installed, and I can't run Final Cut Pro at all!! I need to edit a video tonight, and it crashes every single time I try to do anything in the video - 5 crashes in a row and still counting.
    Finally, none of my HP printers work now - can't print using the same paper options I had before to print pictures. Rosetta has been installed on both machines.
    Is there any help to fix these?!?! I'm seriously considering putting Leopard back on all my machines.

    Your warranty is for one year, so Best Buy should repair it under the warranty assuming there is something that needs repairing.
    You may have a software incompatibility problem at work. You have been experiencing kernel panics so a first start would be to look at a panic log to see what it tells us. We can try diagnosing everything until the problem is tracked down or you can go the extreme route which is to backup your data, erase the drive, and reinstall OS X.
    For the former visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also seeOS X- How to log a kernel panic. Then post the panic log here so we can see what it tells us.
    I would also suggest you try booting into Safe Mode and see if your computer's problems cease. If they don't then create a new user account. Log out of your account and log into the new account. Do the problems cease?

  • Encore WT8-A-102 - registration and different issues

    Dear sir,
    i try to register the product to your official site but gmail says the email adress [email protected] doesn't exist.
    Are you really a serious company?
    You advertise that the tablet has 5 MP camera ... where in hell you saw the 5 MP ...
    In my windows phone i have 5 MP camera and if you compare the pictures of the table with ones of the phone you can see a HUGE difference with the phone pictures being superior of these of the tablet ... i have the tablet for 3 months , i have use it for about 30 hours max and the one problem comes to add to another problem ... now i can't take a picture ...the camera doesn't work.
    For about a week i can't log in to my wifi cause the realtek chipset doesn't work all of a sudden ... and i want to ask you one more time "ARE YOU A SERIOUS COMPANY???" ... I don't think so ... please provide me with information on how i can replace this piece of crap that i bought cause i relied on Toshiba's name ... here in greece you don't have any offices , any telephone , any mail ???? the only mail you have doen't work ... For God sake .....
    A very very angry and to totally disatisfied customer of yours ....

    Im totally disatissfaid its unbeleivable you sell this product!! Which is tottaly useless! I was attracted by the specs but performance is just BELOW any acceptance!!!
    1) I've used it past 4 days since I received it just to set it to be more USER FRIENDLY, and so far haven't solve ANYTHING! Its the most USER UNFRIENDLY PRODUCT I have ever owned! Even writing this post is absolute hell & struggle.
    2) How can you falsely advertise it as "SKYPE OPTIMIZED" when its anything BUT Skype optimized!!!????
    I have been struggling ever since I received it to connect to my old Skype account WHICH IS IMPOSSIBLE! WHY JUST WHY YOU ARE TORTURING CUSTOMERS SO MUCH TOSHIBA!!? Choosing terrible Windows for tablet is the worst thing you have done!!!
    3) I managed to connect on new account on Skype&still impossible on old!!!, I was again so shocked!!! Both Cameras are just TERRIBLE , pictures are USELESS, C'MON its anything but 5Mb Camera, I can't even take any pic with it! My mom couldn't even see me or hear me! Mic is awful as well as WiFi! Then position of the cam! WHY ON EARTH YOU PUT FRONT CAM IN FAR RIGHT ANGLE! Ppl see only my right part of the eye when I try using this "skype optimized" tablet!!! My Chinese Thl5 phone is a blast machine for this dinosaur USELESS TABLET! I couldnt make any call on Skype cos picture is terrible, sound is terrible, wifi receiver is terrible, mic is terrible, they see only my far upper right forehead!!!
    I've given up on using it for Skype- since its impossible!!!
    4) Other rthings;
    Its absolute hell to use it, or write anything on it!!! If I try different language keyboard it automatically change words in some unknown englush words!!! I gave up on using it since I dont want to spend 2hours writing a simple comment on FB or filling a web address!
    If I forgot something its because is impossible even to write on it so I'll copy paste my other review down below!
    5) And yes THIS IS ALSO VERY IMPORTANT - You have a terrible customer service in Serbia this must not happen!
    They are rude, don't reply on questions even start an argue with a customer on FB! When I asked for a phone number who to call about the problems they behaved below any customer friendly standards! Im going to inform about this your Global headquarters.
    6) I would like my money back, since this is utterly useless product, how can you refund me? I will gladly give you back this but your official representatives in Serbia are very rude and dont want to help me with this! Hopefully you will? Since I will never ever buy any of your product if you continue this user unfriendly policy.
    Its been a terible pain even to write this comment on this tablet, I switch to my chinese phone and think to chuck this tablet down the window...
    good bye toshiba, I am terribly dissapointed in you, even though I own more of your products it took me 2 hours to write this how user unfriendly this product is!

  • Can I create a PDF fillable form that allows form multiple entries and one submission?

    For example, I would like to enter new hire information for multiple new hire employees and only click the submit button once.

    Good Morning Randy -
    Sorry for not giving you a clear enough description. I was trying to avoid a novel.
    I hope to use FORMSCENTRAL for create a form for on-line users to register for meetings including paying via paypal.  Some of the people register and pay for the meeting by themselves and others are registered by their office assistant, so there might be as many as 25-30 people.
    The individual registrants are easy and doable with FORMSCENTRAL.
    However, for the multiple registrants, I would like to create a form that can handle multiple registrants and only one submission for payment.  So far, I have  only been able to do that by creating a form that has the registrant fields created multiple times.  I would really like to be able to have the set of fields created once unless I need to add the set of fields multiple times.  I am sure that complications keeping track of the total payment due as well.
    Being able to set-up a table with the fields across (left to right) for each registrant would be good.
    Maybe this does not explain it well enough in which case, I can call and explain our need.
    Thanks in advance.
    Paul

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • USB 3 Instability Issues - Windows 8.1 - Windows 8, The USB 3 Stack Is Unstable On Multiple PCs And Many Devices

    The USB 3 stack is unstable in Windows 8.1 and Windows 8. I was hoping the upgrade to Windows 8.1 would improve the stability but no.
    On two different motherboard systems I have had the same experience with 64 bit Windows 8 Pro and Windows 8.1 Pro compatibility with various USB 3.0 devices and hubs including:
    An AFT PRO-57U front panel card-reader/hub, various Anker, Syba multiport hubs, and these are just a few I have tried, there are many more.
    Symptoms are the same.
    For example: the AFT PRO-57U slots are enumerated correctly as drive letters in Windows 8.1.
    Then the drives (the PRO-57U slots) disappear, then reappear, then disappear, and reappear and so on. This happens consistently and the cycle time to disappear/reappear varies from 10 seconds to 10 minutes.
    The Windows Device Manager shows the devices appearing and disappearing as enumerated devices. I have tried many trial and error methods to solve this, uninstalling and reinstalling USB motherboard drivers, different cables to the AFT PRO-57U device different
    USB 3 ports for the devices and many more...
    One of the hubs I bought specifically because it has the latest chip and firmware: Anker® USB 3.0 9-Port Hub + 5V 2.1A Smart Charging Port with 12V 5A Power Adapter [VIA VL812-B2 Chipset and updated Firmware 9081] This hub FAILs to enumerate some external
    HDDs and other devices.
    To troubleshoot I have tried many things:
    I have disabled Windows Power Options, USB Selective Suspend.
    I have disabled power options for each and every USB device in Windows Device Manager
    I have uninstalled the Asus AI Suite 3 software and the issues remain.
    I have tried BIOS settings for Legacy USB devices on and off and the issues remain.
    I have tried BIOS setting for xHCI Mode - Auto, Smart Auto, On, Disabled
    I have updated to the latest Intel chipset drivers 9.4.0.1026
    I have all the latest BIOS, drivers, firmware, devices, - anything that is involved with the USB 3 stack.
    Etc. etc. etc...
    I have contacted Asus, Gigabyte Intel, AFT, Anker Syba, etc. and they are all finger pointing.
    I have tried so many trial and error methods to solve the problem and I have run out of ideas.
    It is clearly an unstable USB 3 stack and I am not sure who is responsible although I suspect Intel chipset drivers. 
    USB 2 is fine BTW. All devices work correctly when plugged into USB 2 ports.
    From what I can tell, the entire USB 3 environment is a problematic P.O.S.
    If anyone has any ideas I am willing to try anything I have not already tried.
    Thanks,
    Michael Downs
    P.S.  Here is my system information. I have all the latest BIOS, updates, drivers and etc. for all devices.
    ASUS Maximus VI Formula w/ BIOS 1002
    Intel Core i7-4770K  BX80646I74770K      
    G.Skill Trident X 16GB (2 x 8GB) DDR3 2400 Model F3-2400C10D-16GTX
    Samsung 840 Pro 256GB  SSD Seagate Constellation CS ST3000NC002 3TB 7200 RPM 64MB
    EVGA GeForce GTX 760 ACX 2GB 256-bit GDDR5  
    Corsair Carbide Series 330R Mid-tower Case
    Corsair RM850 850W 80 Plus GOLD Certified
    Cooler Master Seidon 240M - Liquid CPU Water Cooler
    Pioneer 15X BD-R SATA Blu-ray Burner BDR-2208
    AFT PRO-57U All-in-one USB 3.0 5.25" Media Card Reader
    Then there is a similar system with the exact same USB 3 issues:
    Gigabyte - GA-Z77X-UP4TH
    Intel i7 3770K
    etc.
    mdd

    Hey, I hope this helps you out a bit... I have had the same issue on my Asus K55A notebook with Win8.1 Pro x64 from the beginning! Thru my extensive research I found something interesting and the possible cause to all this! What I found was that by design
    the xHCI Host Controller has virtual HS 2.0 Ports linked to the 3.0 Ports... Enabling compatibility with 2.0 devices ok... What happens is that the xHCI stack is unstable just like you say... The ONLY WAY I was able to fix the problem was by unlocking the
    UEFI/BIOS to allow me full access to USB Configurations... I had to disable 2 of the HS ports under the xHCI Controller since I have only 2x 3.0 ports... This allowed 3.0 devices to be enumerated correctly under the xHCI stack and 2.0 devices now were enumerated
    under the EHCI 2.0 stack... That's what worked in my case... I'm still digging around for more info about this issue because I find it so odd that no one discovered this when designing xHCI stacks and drivers at MS for Win8/8.1 x64... I hope I shed some light
    on this issue... Good luck and keep us posted!
    Hi, Sebastian. I have the same problem but i'm getting crazy trying to solve it. Can you help me to unlock the UEFI to access full USB config? and give me some suggestions on how to solve the problem?
    My mail is roquen(at)gamail(dot)com
    Thanks in advance!

  • Registration and pivot point issue

    The pivot/rotation points default back to the center of the symbol when I drag them from the library for later use.
    Here's what's happening. I create a symbol, double click to edit and set the registration point (the cross hairs); the pivot point (the white dot) automatically moves to the registration point. Great! When I drag the same symbol from the library to the stage in a later scene the registration point is the same but the pivot point has defaulted to the center position of the symbol. How do I keep this from happening? Am I leaving out a step? Help, please!

    Never mind. I think I figured it out; create the object on the stage, edit the registration and pivot points in the symbol in the library, return to stage, right click symbol and 'set transformation point.' I might be able to set that last action as a hot key.
    Thanks for all your help. You should write the manuals.

  • Multiple Artists and Genres per Song

    I listen to lots of electronic music, and I'm a professional DJ.
    Electronic music is a very diverse and complex music category, and have lots of genres and sub-genres. Electronic music producers usually try to transpose genre boundaries, and they usually produce songs contained in two or more equally important genres. For instance, a track can be contained in the genres "house" and "techno", or "disco", "techno" and "acid".
    Also, it's really very common that electronic music artists collaborate with each other. Songs produced in collaboration do not belong to one single artist, but to two or more. In this case, it's not correct to say that one is the main artist, and the others are second artists (collaborators, composers remixes, or whatever) - they all detain the same equal authorship status over the composed track.
    The problem with iTunes is that it supports one single genre, and one single artist per song. Sure, there's the album artist, but, again, that doesn't apply to albums where multiple artists participate with equal importance. And using "V.A." or "Various Artists" in the song artist or album artist fields is ugly and useless - it doesn't say anything relevant.
    I know that Smart Playlists and Grouping features can help alleviate this deficiency, but they don't solve them at all. They're not elegant and complete solutions. If you browse the iTunes library, you will still see tracks as having only one genre and one artist, which is very frustrating.
    What I ask is really easy to implement. In fact, it wouldn't require to alter the existing ID3 and tag scheme. Just split artists and genres using a colon or semicolon character. For instance, in the "Artist" tag, iTunes can store the following:
        "Christian Smith; Mark Broom; Renato Cohen"
    and then, in the browser, iTunes could display "Christian Smith", "Mark Broom" and "Renato Cohen" as three distinct artists.
    The same could be used for the "Genre" tag:
        "Techno; House; Progressive"
    could be see, in the browser, as three different genres: "Techno", "House" and "Progressive".
    I've made an extensive web research, and I know that this deficiency  doesn't annoy only me, but lots of other users. And it's a pretty old request too - dated from 2003.
    Please, Apple, implement this feature. My huge electronic music collection really needs to be categorized into multiple artists and multiple genres.
    Thank you.

    Well said comment...
    The solution to this problem overall is simple.
    If I pull out my Ipod, and go to the section to browse by artist, then all artists would be listed individually in the list if they are separated in a song by the '&' symbol.  In the main music list in itunes, this would not result in multiple copies of the file.
    The same situation would apply in the genre browser.  If there is a tag with "POP & Chinese" then the song would appear if I was searching in pop OR Chinese.  It would not show a Genre called "POP & Chinese" in the genre browser.  It would show POP and Chinese SEPARATELY in the list!!!
    This is not a issue of some programming esoterica nor does it require some super genius to figure out.
    Wake up Apple programmers....
    Even smartlists are broken in the ipad/ipod and don't work the same way as they do in itunes. WHAT ARE YOU DOING WITH THAT A5X chip that you can't fix this problem?  I make a smartlist for the genre section at least and this allows me to accomplish what I stated above with genres by using the smartlists instead of the genre browser.
    The artist browser and genre browser are worthless to me...  since MANY of my songs have multi-artist and multi-genre separated by '&' and the stupid browser lists all the permutations instead of delimiting the genres and artists.
    My genre list looks sorta like this:
    Pop & chinese & instrumental
    Pop & japanese
    Pop & Soundtrack & Anime & Japanese
    Pop & score & anime
    Pop & chinese & vocal
    Pop & electronica
    What a mess...  but I can't categorize my stuff any other way without making it hard to decide which place to put a song.  Does a chinese soundtrack pop song get filed under chinese? or pop? or soundtrack?  I SHOULD be able to find the song regardless of which sub-genre I look under in the genre browser.
    This is basically simple.  The people that understand this are basically right and Apple is WRONG on this...  no matter what detractors on this thread say. The devices and software could easily be tweaked to dramatically improve the user experience but Apple is poor at getting involved in discussion forums like this to allow us to help them fix these issues.  Some of the product developers on the app store are far more receptive to suggestions than Apple is.  They are not getting enough of the advantages of crowd sourcing.
    I would fly out to Cupertino and correct MANY UI mistakes/errors for them if they will have me out there...
    I'll hold my breath and wait for a message to have me come out there.  There are still a lot of things about OSX and iOS that can be made simpler too.  still FAR too much extraneous junk and poor implementation of cloud capabilities.
    Why on earth does itunes have a "get info" menu dropdown to get into track data?  Why is the track data separated into 7 submenus separated by tabs?  The whole data entry situation in itunes is way too complex.  It's downright painful.
    Why are there no 24bit audio files yet for premium prices?  Are the people at apple doing too much LSD?  WHAT IS GOING ON?  You have to be disabled not to hear the difference between great recordings and that 256kbps garbage the peddle.  come to my house on the 107db sensitivity speakers with a Class A amplifier and tell me you can't tell the difference and I will have your hearing checked.
    hopefully the itunes department will contact someone on this thread to provide a list of the mistakes in itunes/ipod software so the problems can all be fixed.
    An AUDIOPHILE needs to take over itunes and fix this nonsense STAT.  It's simply embarassing at this point.  Where are my 24 bit files on my 1000gb ipod?  WHY IS THERE NO AUDIOPHILE IPOD? They can use there 100 billion cash hoard and make a GOOD home distribution system beyond "airplay/airport".
    Why is mediocrity being considered at Apple when they do so many other things great?  Considering I own half a million dollars in stock, believe me I do appreciate the company at large.  I am only ranting about the treatment of audiophiles and the complete dumbing down of the music experience to mass garbage when we live in the 21st century.   What we see is important (retina display) but what we hear is not?
    /rant off...
    Apple feel free to contact me and I can tell you how to develop the BEST product for music ever implemented...  I don't need compensation...  I want products that I WANT to buy!!!!

  • TS3367 We have one Apple I'd and multiple devices, and are not getting FaceTime to work between the devices on the same id

    We have one apple I'd with multiple devices and FaceTime will not work between them?

    Put separate email addresses (free gmail) on each device.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

Maybe you are looking for