Multiple Repetitiive Areas

I need to create a print layout with the BP name and contact details at the top, a list of contact people in a repetitive area and then a list of items they have ordered in a 12 month period in another repetitive area. How would I do this? The Repetitve Area...-> Add... is greyed out, so don't tell me that is how.

Hi Jason
The first problem will be that the PLD is linked to certain forms in SAP Business One. The only report for Business Partners is GP Index and it is not linked to the BP Master. If you click on print preview from BP Master, you will notice that there is no default report linked to the BP's.
I am not sure if ALD would solve this somehow. The best option is a query linked to a Query Print Layout. Here you can use grouping and sorting to manipulate the layout. The BP will have to be in the repetitive area though.
Kind regards
Peter Juby

Similar Messages

  • Error while posting Customer with Multiple sales areas using DEBMAS05.

    Dear experts,
    We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05.  we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error:  "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created!  The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
    As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization).  OSS Note (384462)  provides further details about this. One Important point from the note is: 
    "As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
    Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
    For your customers, contact persons exist to which a private address or a different business address is assigned.".
    This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
    If someone have experienced the same issue before and have found a solution to it, kindly help out.

    I have found the cause and solution to this problem.
    This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
    This was resolved by splitting the IDOC into 2.
    The solution is to First post only the KNA1 segment and create the customer.
    In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”:  you would have got the KUNNR after the first step.
    Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC. 
    I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
    Cheers
    Venkat

  • Safari warning before quitting when multiple tabs are open?

    I'm a rather clumsy typist who often uses Apple+Tab to toggle through my open programs. This works great 99% of the time, but that other 1% is rather frustrating considering that the Q key is right next to Tab.
    Apple guys, please implement a pop up/drop down warning when attempting to quit Safari when multiple tabs are open (or at least the option to enable or disable it). I use this browser for work and often have many tabs open, so accidentally quitting the browser only impedes on my workday. I know I should be more accurate, but isn't that what part of progress is? The empowerment of laziness? =)
    Thanks for your time, and hopefully we see this included in soon-to-come upgrades!
    Oh, and if this feature is already available, feel free to show me the way.
    G4   Mac OS X (10.4.7)  

    jefftovar,
    I created and modified the Safari Keyboard Shortcut
    Quit (⌘+Q) command to (⌘ControlQ) by using System
    Preferences...>Keyboard Shortcuts.
    ;~)
    Great suggestion! But, the default Quit (⌘+Q) command is still in effect. I've looked about in trying to deactivate it, but can't seem to find it. How did you get rid of yours?
    G5   Mac OS X (10.4)  

  • A lot of memory is used when multiple tabs are open

    Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
    Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Report with multiple Detail Area

    Hi All,
    Please see the Report pointed to the link below:
    [Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
    Some Explanations:
    ========================
    (1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
    (2) The lines with "WBLNX'" "123, 123.12", 
                             "WBLNX'"
       are variable data associated with the same Heading: "ABCDEFGH..."
    (2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
    (3) Item Code Descriptions ==> is a Header Info
    (4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
    (5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
    QUESTION:
    ===================
    How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
    Thanks and Best regards,
    Felix

    Hi Felix
    You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
    Hope this helps.
    Regards
    Nikhil

  • Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

    I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
    Is there any workaround to this error?  so that drillthrough can be done even with multiple selection.

    Hi Vikas,
    The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
    Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted. 
    For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
    When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
    1. Select a single Item.
    2. Select all items.
    Hope this helps!
    Please mark as Answer if this helps! Thanks, Rajasekhar.

  • Dynamic sql reurns no data when multiple values are passed.

    (Dynamic sql returns no data when multiple values are passed.)
    Hi,
    While executing the below dynamic sql in the procedure no data is returned when it has multiple input values.
    When the input is EMPID := '1'; the procedure works fine and returns data.Any suggestion why the procedure doen't works when input as EMPID := '1'',''2'; is passed as parameter?
    =======================================================
    create or replace PROCEDURE TEST(EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
    stmt VARCHAR2(9272);
    V_EMPID VARCHAR2(100);
    BEGIN
    V_EMPID :=EMPID;
    stmt := 'select * from TEST123 where Empid is NOT NULL';
    IF V_EMPID <> '-1' THEN
    stmt := stmt || ' and Empid in (:1)';
    ELSE
    stmt := stmt || ' and -1 = :1';
    END IF;
    OPEN rc FOR stmt USING V_EMPID;
    END Z_TEST;
    ============================================================
    Script for create table
    ==================================================================
    CREATE TABLE TEST123 (
    EMPID VARCHAR2(10 BYTE),
    DEPT NUMBER(3,0)
    ===========================================
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('1',20);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
    =============================================
    Select * from TEST123 where Empid in (1,2,3)
    EMPID DEPT
    1     20
    2     10
    3     30
    3     30
    2     10
    ===================================================================
    Any suggestion why the procedure doen't works when input EMPID := '1'',''2';?
    Thank you,

    The whole scenario is a little strange. When I tried to compile your procedure it couldn't compile, but I added the missing info and was able to get it compiled.
    create or replace PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
      stmt        VARCHAR2 (9272);
      V_EMPID     VARCHAR2 (100);
    BEGIN
      V_EMPID := EMPID;
      stmt := 'select * from TEST123 where Empid is NOT NULL';
      IF V_EMPID = '-1' THEN
        stmt := stmt || ' and Empid in (:1)';
      ELSE
        stmt := stmt || ' and -1 = :1';
      END IF;
      OPEN rc FOR stmt USING V_EMPID;
    END;If you pass in 1 as a parameter, it is going to execute because the statement that it is building is:
    select * from TEST123 where Empid is NOT NULL and -1 = 1Although the syntax is valid -1 will never equal 1 so you will never get any data.
    If you pass in 1,2 as a parameter then it is basically building the following:
    select * from TEST123 where Empid is NOT NULL and -1 = 1,2This will cause an invalid number because it is trying to check where -1 = 1,2
    You could always change your code to:
    PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
      stmt        VARCHAR2 (9272);
      V_EMPID     VARCHAR2 (100);
    BEGIN
      V_EMPID := EMPID;
      stmt := 'select * from TEST123 where Empid is NOT NULL';
      stmt := stmt || ' and Empid in (:1)';
      OPEN rc FOR stmt USING V_EMPID;
    END;and forget the if v_empid = '-1' check. If you pass in a 1 it will work, if you pass in 1,2 is will work, but don't pass them in with any tick marks.

  • Report from multiple subject areas

    Hi,
    I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
    Is there any other tool from OBIEE suite where I can design it?
    Thanks

    Yes, i can see datatype and number of columns is same in both queries.
    i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
    Query is something like as below
    select SA1.col1 saw_0,
    SA1.col2 saw_1,
    SA2.col1 saw_2,
    SA2.col2 saw_3,
    FROM
    (select col1 saw_0, col2 saw_1 from "subject area1") SA1
    FULL OUTER JOIN
    (select col1 saw_0, col2 saw_1 from "subject area2") SA2
    ON SA1.col1 = SA2.col1
    I can't see any issue in the query...please comment.

  • The multiple desktops are gone. Cntrl/right arrow no longer works

    The multiple desktops are gone. Cntrl/right arrow no longer works. Nor does dragging a window to the right.

    chiefgypsy,
    Spaces no longer exists in Mountain Lion. The replacement, Mission Control, has a different implementaion but allows similar results.
    Mac Basics: Mission Control
    About Mission Control | Macworld
    CNTRL RIGHT ARROW doesn't work: Apple Support Communities

  • USING MULTIPLE CONTROLLING AREA in the column

    Dear Experts,
    As per my requirement i need fetch the data from multiple controlling areas in to one report. please let us know how many ways are there? can i able to use controlling are in the column of the report. when i try to select the controlling area is not appearing in the coumn and it is appearing only in the gene

    Hi,
    You can select multiple Controlling area Please try with following steps.
    Maintain variant
    Click on attributes.
    Environment > Maint.sel.varables.
    Click on Display/Change.
    Create new Parameter.
    Maintain selection options to new parameter.
    Save and back.
    Select "T" in selection variable against Field name :Controlling Area.
    Select the selection variable(Newly created Parameter)
    Regards
    Mahesh

  • How to open a pdf package in browser when multiple files are bound together.

    Hi,
    I have to open a pdf package in browser that contains multiple pdf files any suggestions will help me a lot.
    Thanks.

    It shows me a page says "Multiple files are bound together in this PDF package"

  • How to tell if multiple files are selected when they are opened in windows

    Hello, can someone help me, my question is how to tell if multiple file selections were made when they were opened (right-click->open). Through modifying the registry I already have my Java program start up when a file with specific extension is double-clicked.
    The problem is when multiple files are opened at the same time, an instance of java program is created and run for each of the selected files. Ideally I would like it so that only one instance of java program is run, regardless of the number of selections.
    When you try it with Microsoft media player or winamp for example, it seems that only one process is created and run (I don't see many processes spawning when I watch it using task manager). Maybe this is more of Windows issue rather than Java programming issue. Any help is appreciated.

    If anybody wants to know, this can be solved by either 1) using DDE 2) using DropTarget (from Windows) 3) make a light-weight EXE dispatcher (eg. in C), and use file to have IPC between the dispatcher (which gets the filepath for each of the selections) and the java program. There can be other methods of course. Using the second option is the simplest but it requires WinXP and higher. I implemented it using option 3.. the downside of this is there's a warning message pop up when trying to open many (>20?) files at the same time by Windows. However, option 1 'seems' to have the same limitation. Having a java program created each time for each of the selections seems to be too slow, for viable option.

  • COPA Assessment Cycle using KEU5 for multiple controlling areas

    Hello All,
    There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
    A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
    Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
    Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
    Regards,
    Soumya

    Hi Soumya,
    Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
    Pls find the following text from SAP Help...
    Parallel Processing of Cycles of an Allocation Type
    Use
    Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
    You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
    To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
    You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
    When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
    Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
    Srikanth Munnaluri

  • Need to Create Customer Master Data under Multiple Sales Areas

    Hi Gurus,
             My requirement is to create a customer under multiple sales areas by processing the Inbound Idoc function module "IDOC_INPUT_DEBITOR"( After generating Outbound Idoc and outbound is processed successfully).
             But, when I am trying to send the multiple sales areas information in segment "E1KNVVM". It is creating the customer under first sales area filled in first E1KNVVM segment and it is giving error that "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1" and it is not creating the customer under other sales areas.
            Following are the details of the Outbound Idoc which I have processed.
            Idoc Basic type : DEBMAS06
            Message          : DEBMAS
            I have filled required fields in E1KNA1M and E1KNVVM segments. But filled E1KNVVM segments  twice with different sales area data.
          Please help in solving this problem?

    is it really just one IDOC?
    I have never seen that SAP just does a part of one IDOC.
    the structure of DEBMAS ist like this:
    E1KNA1M
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNB1M
    which means for your example it should be like this
    E1KNA1M
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNB1M
    and in this case I am very certain that it would never just process and create the part for one sales area.
    Maybe your customer already exists from ealier tests with just one sales area.
    Display your IDOC in WE02 or WE05 and make sure you have a value in name1 field

  • File corruption on SDCard when multiple files are being written from WinCE 6.0R3

    We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS.  When multiple files are being written to the file system we occasionally
    see file corruption with data destined from one file, ending up in another file, or in another location in the same file.  We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
    check that the memory controller on the card is not the source of the problems.
    We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
    We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
    We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux.  We
    can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
    One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
    So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted.  We have tried to minimize writes to the file system, but so far we have not found a
    way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
    Thanks
    Peter

    All QFE's have been applied we are building the image so we have some control.
    I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones.  The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
    to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
    We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
    What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard.  If the system used the same cluster to write the 2 files then that would explain the issue.

Maybe you are looking for