"Multiple Reports per Retrieval not Supported" Error

I would like to create multiple reports on a single tab and refresh the data with one action. Is there a way I can set up the cube to enable this or am I stuck writing macros?Thnx

Take a look in the documentation at the ESSCELL function. I don't know how practical it would be to set up an entire report with it, but it can be done.If you or anyone where you work has experience with Hyperion Enterprise Retrieve, ESSCELL works very similar to the HPVAL function in Retrieve. Basically the parameters of the function allow you to define a specific member combination to reference a data value in an Essbase cube. You can put the function in any cell you choose.Hope that helps.

Similar Messages

  • Essbase error currently multiple reports per retrieval not supported

    Hi,
    One of my users got this error message while working on Essbase Excel add-in. "currently multiple reports per retrieval not supported". Any suggestions why do we get this error and what changes have to be to made to avoid it?
    Thanks,
    Junaid

    It's kind of a catch-all error message, usually spurred (so I guess that isn't really a catch-all) by having the same dimension referenced more than once in the sheet, e.g., Product in the grid point of view and in rows going down or a dimension repeated in the grid point of view.
    Regards,
    Cameron Lackpour

  • Error msg:  Multiple reports per retrieval not supported

    I have a multiple tab excel file and retrieve each tab individually. Occassionally on retrieve, I get the following message "Currently, multiple reports per retrieval is not supported". I have no other tabs active. Please help! Thanks.

    This wonderful error messages means that a dimension(s) is represented in more than one place, for example, a member from the measures dimension is where you expect it, on the page header, but it is also somewhere under the table where you didn't mean to have it. I usually troubleshoot these errors by selecting and retrieving smaller ranges, and gradually expand the selected region until you get the error. Highlight the suspected text, and invoke member select to see if the text is in the outline (because the dimension selector will default to a dimension other than the first dimension).

  • Multiple Report Worksheets is not supported in this version of XL Reporter!

    Using XLR for SAP 2007A PL46 we get the following error when trying to go to another worksheet (Excel tab).
    "Multiple Report Worksheets is not supported in this version of XL Reporter!"
    Is there really a version that does support multi-tabs or this is simply a malformed error message?
    Steve Blackburn

    Steve,
    This message is just a standard error message.  I believe there are no current XLR versions support Multiple Report Worksheets.  That could mean: it once had or simply leave a room for that functionality enhancement.
    Thanks,
    Gordon

  • IOS AIR3.6  runtime error 3747 Multiple application domains are not supported on this operating syst

    3747
    Multiple application domains are not supported on this operating system.
    I'm getting this error from an IOS app compiled with air 3.6.
    No code has changed  from Air 3.5 which is error free. Web app / android versions of the same codebase do not error.
    See the stackTrace below ( well done Adobe for providing this since air 3.5 !! )
    I use swfloaders for loading embedded swf vector art graphics. This has not caused any issue until now. Should I load all art into the main app's application domain ?
    The error does not crash the app and I could suppress it easily but is could the tip of the iceberg because application domains are scary stuff.
    Error: Error #3747
            at flash.display::Loader/loadBytes()
            at mx.core::MovieClipLoaderAsset()
            at mx.controls::SWFLoader/loadContent()
            at mx.controls::SWFLoader/load()
            at mx.controls::SWFLoader/initializeHandler()
            at flash.events::EventDispatcher/dispatchEvent()
            at mx.core::UIComponent/dispatchEvent()
            at mx.core::UIComponent/set processedDescriptors()
            at mx.core::UIComponent/initialize()
            at com.komodomath.app::ImageSWFloader/initialize()
            at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
            at mx.core::UIComponent/addChildAt()
            at spark.components::Group/addDisplayObjectToDisplayList()
            at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
            at spark.components::Group/setMXMLContent()
            at spark.components::Group/set mxmlContent()
            at spark.components::SkinnableContainer/set mxmlContent()
            at spark.components::SkinnableContainer/createDeferredContent()
            at spark.components::SkinnableContainer/createContentIfNeeded()
            at spark.components::SkinnableContainer/createChildren()
            at mx.core::UIComponent/initialize()
            at com.komodomath.lesson::SaveStatusCheck/initialize()
            at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
            at mx.core::UIComponent/addChildAt()
            at spark.components::Group/addDisplayObjectToDisplayList()
            at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
            at spark.components::Group/addElementAt()
            at mx.states::AddItems/addItemsToContentHolder()
            at mx.states::AddItems/apply()
            at mx.core::UIComponent/applyState()
            at mx.core::UIComponent/commitCurrentState()
            at mx.core::UIComponent/setCurrentState()
            at mx.core::UIComponent/set currentState()
            at com.komodomath.maingroups::LessonGroup/handleNewLessonClick()
            at com.komodomath.maingroups::LessonGroup/___LessonGroup_KButton1_click_lessonOver()

    same issue as http://forums.adobe.com/message/4736711

  • "SQL Server 2008 Reporting Services does not support map report items"

    Hi,
    I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
    "Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
    -Also, similar kind of error I am getting for "Indicator" control.

    Hi Tej,
    I think you get this error message when you are deploying a report to report server using BIDS, correct?  If not, please provide more details on your scenario :-)
    If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server.  When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it.  Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
    BIDS gets the server version from a report project property called TargetServerVersion:
    http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
    If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services."  The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
    Hope this helps!
    Cheers,
    LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights.

  • Getting a Not Supported error box when trying to link a subreport to the..

    I am trying to build a subreport off of my main report. I am trying to link my subreport stored procedure to my main reports stored procedure. All of the paremeters on the sub report SP are of the same data type of the fields I am linking my parameters to in the main report SP. After I set it all up and go to preview it I get a "Not Supported" error box that pops up. Then I click ok and all i have is a blank white page. Does anyone know what is not supported? This happens when trying to build this report in crystal 2008. I even tried building this same report in crystal 10 and it works perfect. I don't know what I am doing wrong in the crystal 2008 environment. Please help

    Thanks Bill.  This fix resolved my issue.
    I would award some points, but I guess as I didn't post the original question there is no facility to do this.  Shame.
    Appreciate it, Brendon.
    Edited by: Brendon McEvoy on Apr 23, 2009 1:39 AM

  • The Report Designer does not support this query drill down colum

    Iam working On BI7 When iam doing report desingner when iam opening query through data provider
    Iam getting thsi error The Report Designer does not support this query drill down colum colum axis may contain one structure only remove additional dimensions
    I modify the cube and i remove some dimensions also My problem is when iam putting characterstics in Colums Iam getting this error When iam removing that charcterstics from colums it was not throuing any error
    Chaitanya

    hi,
    report designer is for front end view design and the designcan be done with restriction to navigation.
    you have dynamic and static report designs with restricted navigations.
    chk the links for document
    http://help.sap.com/saphelp_nw04s/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
    Ramesh

  • CR9/Informix 7.4: "Not Supported" error

    Hi All,
    I've been racking my brain for the last day on this. I have a crystal report that has sub-reports, all data is collected from Informix stored procedures, but i'm receiving a very non-descript error "Not Supported" when trying to add any new subreports:
    Main Report -> (storedproc_1)
      --> SubReport (storedproc_2) Existing
      --> SubReport2 (storedproc_3) Existing
      --> SubReportNew (storedproc_4) NEW
    When i run the above report, i get this "Not Supported" error pop-up about 4 times in a row on the page where SubReportNew is supposed to run. if i suppress this subreport it works fine and shows the first 2 subreports.
    The Strange Part:
    When i open the subreport and run it in isolation it works! Then if i run it from the main report it works fine. But once the document is closed and re-opened its back to not working.
    When i put tracing on the stored procedure i find that Crystal isn't even calling it - it bombs out before that point.
    Has anyone ever experienced this, or know how i can get more description on the error messages, is there a log somewhere with more detail?
    Any help will be greatly appreciated.
    Regards,
    Trent

    This thread can be closed. Although I did not find the cause of this problem, i did find a work around.
    I was able to create new sub reports IF i import them from previously created reports - i was then able to change the datasource & create the reports i wanted.
    The only thing i can think of is maybe a Windows release has changed some dependent DLLs and causing incompatibility issues. I say windows because we have not upgraded or installed any fixes for CR9 for over 2 years and never had this problem.

  • "original order" grouping is not supported.---- Error code:-2147215356

    In one of my reports i need to display the data in original order.It is working fine when i run the crystal report,but when i integrate with java and check the report then it is giving the below error.
    javax.servlet.ServletException: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error loading report: "original order" grouping is not supported.---- Error code:-2147215356 Error code name:fileNotOpened
         org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:850)
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)

    Hi Suhasini,
    The JRC XI R2 (11.5) doesn't support "Original Order" grouping, however this functionality has been introduced in the latest version JRC -Crystal Reports for Eclipse
    This version is available as a plug-in to the Eclipse IDE ad is available here:
    http://diamond.businessobjects.com/eclipse
    Note that you can use the same keycode you use for CR XI Release 2 with CR for Eclipse.
    If you are not using the Eclipse IDE you can still used these jars as a drop-in replacement of the JRC XI R2 jars.
    Kind Regards,
    Flavio

  • Datatype : 25 not supported error while saving Logical Query in BIP Dataset

    Hi All,
    I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
    Here is the simple query :
    Select name, revenue, date from
    select "SubjectAreaName"."TableName"."Name" name,
    case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
    date date
    from
    "SubjectAreaName"
    where
    date = :Date
    ) T1
    Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
    Please let me know if you have come across such a problem ?
    Any help on this regard would be highly appreciated.
    Thanks
    Swarna

    ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
    once check this tutorial may be you already
    i use to create parameters like this i didn't face any issue
    SELECT * from TEST where ID=:p_id
    http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

  • CS4 install problem "you cannot run...architecture not supported" error

    Just received my copy of CS4 (Mac) from amazon.com. Installed it. But could not get it to run. Got a "You cannot run....architecture not supported" error message. Can't understand why? This is my first version of Photoshop CS. Didn't install CS3...etc. Nor did I previously install the "master" edition. And I am running a MBP 2.5GHz laptop. So it has to be software related. A corrupt file perhaps?
    I also cannot install Adobe AIR. Suddenly 3 windows pop up. Telling me I can't install AIR.
    Not happy. Expensive software not running. Not good. :P What gives???
    Please help me soon!

    Where were you yesterday Buko?? :) Where would one find the "CS4 Cleanscript" any how? Would have been nice if you provided a link. Heh...
    Any how. Last night. I did d/l the trial version of CS4 Extended. Installed it. Then read the READ.ME file. Stresses that you MUST use their uninstall program. That you can't simply drag the folder to the TRASH (or use AppDelete or AppZapper...as you would be doing the same thing pretty much). So, I used Adobe's CS4 uninstaller. Did a very thorough job of removing the right files.
    I managed to sucessfully install my copy of CS4. I even got the proper SETUP dialogue box this time (6 tabs). Previously only 3 tabs were visible. This one asks you to input your serial # and even register before you finish.
    Now I see the blue PS folder icon. Have copied a few PS program icons to my dock. Working now as it should.
    Moral of the story? Read the READ.ME file!! And use proprietary uninstall programs for huge complicated programs like PS CS4. :) Later guys.

  • AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

    AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
    Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
      http://support.apple.com/kb/HT4700
    I have a W2K3  server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
    Any help greatly appreciated,
    Cheers,
    Ian

    This may work for you:
    http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

  • Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

    Hi, I looked at the KB document but the email link on it no longer works.
    I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the  "Graphics card or driver not supported" error, the other does not.
    We have two DellOptiPlex 7010's,
    Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
    In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
    On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
    "supportabilitytest.exe has stopped working
    A oriblem cause the program to stop working correctly. Please close the program."
    Then when that's closed out we get:
    "Graphics card or driver not supported!
    New features in this version of Jabber Video are not supported by your computer's graphics driver.
    Update to the newest graphics driver available and run Jabber Video again."
    I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
    I appreciate any insights, thanks !

    Hi ksouthall,
    It sounds like the openGL supported version did not install on the one that is failing.  There isn't much we can do regarding that error.  Best practice is to always upgrade to the latest manufacturer's available driver.  Client requirements are below.
    Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
    For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
    For VGA video calls, Intel Atom @ 1.6GHz or better.
    Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
    Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
    Regards,
    Jason

  • E3000 shows "USB is not supported" error with External Harddrive

    I have the E3000 router and recently purchased a USB WD (Western Digital) 2TB External Harddrive.  I plug the Harddrive into the router, open the router homepage (http://192.168.1.1/) then click on Storage > Disk and I get a "The attached USB is not supported" error - any suggestions on how to fix this?
    Thanks for any help!
    Solved!
    Go to Solution.

    Likely Final Update:  WD Support sent me a link to download / install SmartWare and solve the problem I was having with the SmartWare software ("Drive Settings" was greyed out).  Once I got SmartWare back up and running I was able to change the "Drive Settings" within SmartWare.  As the last update suggested, I modified the sleep timer settings and security (password settings) and tested to get the following results:
    Sleep Timer on / Password protection on:  E3000 shows "USB not supported"
    Sleep Timer off / Password protection on:  E3000 shows "USB not supported"
    Sleep Timer on / Password protection off:  WD Hard Drive seen and seems to function properly when connected to E3000
    Sleep Timer off / Password protection off:  WD Hard Drive seen and seems to function properly when connected to E3000
    So (other than maybe some inital problems with the WD SmartWare) it appears the "USB is not supported" error is due to the Password protection being turned on for the External Hard Drive.  This point should be highlighted in the Western Hard Drive materials but I don't see it anywhere on the box or in the manual (maybe its fine print in the manual).  Cisco and / or Western Digital are screwing us by not allowing password protection (or making this point known) on at this least model of Hard Drive!
    Thanks again to everyone that helped with troubleshooting this!  

Maybe you are looking for