Multiple rollover slidelets on one slide

I have musltiple rollover slidelets on one page and as soon
as one finishes I want the user to be able to rollover the next one
and have it start. On the slide timing, it looks like it is set up
right but in execution there is a long delay before it starts. Any
suggestions?
Thank you!

Hi Larry
Good job on reducing the file size.
I think we got the issue sorted. Here's what the deal was.
Rita had four Rollover Slidelets on slide three. Her desire was for
the first to become available for rolling over just after the audio
narration completed. So she timed the first slidelet at about five
seconds. She wanted the next to become available for rolling over
just after the user finished listening to the audio narration
contained inside the first slidelet. The third shortly after the
second finished and the last shortly after the third finished.
Click here to
see a screen capture of the Timeline before changes
In practice, she was experiencing longer than desired delays
before the next rollover area became available. So the desire was
to shorten the time.
Click here to
see a screen capture of the Timeline after changes
What was happening was that when a slidelet was playing, the
main timeline stops playback. This means that after the first
slidelet completes, seven and a half seconds must elapse before the
next slidelet becomes available. After that second slidelet
completes play, another 11 seconds must pass in order for the last
to become available. So by configuring the slidelets closer
together as in the after example, the issue was apparently solved.
Cheers all... Rick

Similar Messages

  • Multiple Rollover Slidelets displaying at the same time.

    I have slides with multiple rollover slidelets.  Each slidelet has its own audio file added and the "Stop Slide Audio" is checked.
    The Rollover Action is set to On Click = "No Action"  On Rollover = "No Action".   Stick Slidelet is unchecked.
    All works as expected.  Until you start randomly clicking on the rollover hotspots.  Eventually, if you rapidly click like a test monkey from hotspot to hotspot, you can get the slidelet to appear and it will not go away (clicking the close X does nothing as well).  If you roll over other hotspots you will have both slidelets visible and playing audio at the same time.  The audio of the "stuck" slidelet continues to play even if you go to the next slide.
    Here is a recording of an example (no audio) but you'll see what I'm talking about. http://envolvemedia.adobeconnect.com/rolloverissue/
    Has anyone experienced this? or have a workaround.  I submitted it to Adobe as well.

    This is very strange, difficult to guess the cause... never had such an issue. Normally when the object to which the audio is attached disappears the audio stops. So in your case going to a next slide should stop the audio of the previous slide. Same with object audio.
    Do you have the different audio clips (one per slide) in the Library? Could you try to delete the audio on the slide and drag it again from the Library to see if you have the same result? And what happens when you attach the audio clip to an object on the slide (you can create a totally transparent rectangle with no stroke that will not be visible to attach the audio).
    Lilybiri

  • Play diffenrent audio on different rollover captions on one slide

    Help!!! I currently have 6 rollover caption on one slide and
    I assign complete different audio files to each. But when I preview
    it, all the rollover caption plays the same audio of only 1 out of
    6--is there a way to have each plays its own audio?
    I also tried replace one of the rollover caption with
    rollover slidelet with a text caption and audio-- it didn't change
    the situation at all.
    Thanks!

    In Captivate version 3 the audio can be added to either the
    rollover area, or the rollover caption. Do NOT add audio to the
    rollover area. Add it only to the rollover caption. If audio exists
    at all on the "rollover area", remove it and add it instead to the
    caption.
    To reiterate, add audio to the Audio tab for the object, not
    the rollover area. And keep in mind that the rollover object (the
    caption) is NOT on the timeline ... only the "area" is shown on the
    timeline, so you will have to go to the object on the stage and
    open it to add audio. Hopefully that will help solve your problem.
    Welcome to the posters of the Captivate user community,
    smokingcat!

  • Multiple text captions on one slide?

    Hi, i have question about multiple text captions on one slide of my project. I want o change content of text caption by clicking on different buttons on the slide.
    There are 4 buttons on slide and in the middle of the slide there is text caption. Is it possible to change content of the caption by clicking the button or is there some way to do it different (hide or show different captions etc..)?
    thx martin

    Hi Mister C
    I'm curious about something. You are using an action I've seen suggested elsewhere here. I use a similar approach but found that I had issues with the approach you are showing.
    My approach is to use the rdcmndGotoFrame rdinfoCurrentFrame - 5
    Personally, I've seen it where the way you point out failed in many cases for me. By "backing up" the playhead five frames or so, things then worked as the playhead drifted back to the pause point.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Multiple Quiz Questions on one slide

    Hello Captivators,
    I am using Captivate 3. It seems a waste of space to have one
    quiz question per slide. Is there a way to have more than one
    question per slide?
    Thanks,
    eholz1

    Hi eholz1
    Sorry, but there is no current way to combine multiple
    questions on a single slide. If you would like to suggest this
    feature to be considered in a future release, you may do so by
    clicking
    here and completing the form you will find there.
    Cheers... Rick

  • Multiple Question types on one slide

    I need to create a quiz slide with different types of questions on one slide.  Basically I need a multiple choice question and a couple of short answer questions to do an evaluation of the course and ask for feedback.  How do I do this?
    Thanks
    Terri

    Hello,
    If you want to create custom slides with standard objects and/or widgets, have a look at the articles I posted about this subject on my blog. Here is one link:
    Widgets and custom questions - source list
    Recently I wrote some about reporting that kind of questions
    Lilybiri

  • Multiple pans/zooms on one slide?

    Any way to do multiple KB pans/zooms on one slide?
    In iMovie, you can duplicate a segment, and reverse it. If I could do that to a slide with KB, then reverse it, and change the "end", this would work for me.
    But when I "Duplicate" a slide with KB, the KB is lost, and I can't see how to reverse the KB.
    I know I could do this manually, but to get the "end" of on slide to match exactly the "start" of the next seems difficult.
    Any thoughts?
    Thanks,
    James

    Hi Mister C
    I'm curious about something. You are using an action I've seen suggested elsewhere here. I use a similar approach but found that I had issues with the approach you are showing.
    My approach is to use the rdcmndGotoFrame rdinfoCurrentFrame - 5
    Personally, I've seen it where the way you point out failed in many cases for me. By "backing up" the playhead five frames or so, things then worked as the playhead drifted back to the pause point.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Multiple text boxes on one slide

    Hi all-
    I want the user to enter their First Name, Last Name, then User ID on one slide.
    I am using 3 text boxes.
    1.  I want the cursor to be positioned in the First Name text box when the user gets to that slide.
    2   I am not validating their information but don't want them to get past a box if they don't enter anything.
    How can I accomplish #1 and #2?
    Thank you as always.
    Erika

    Hi gtmatt22
    Well, in case you are interested, I may have discovered a way
    to accomplish what you initially asked without the use of a
    question slide.
    Add your text entry boxes. Then stagger them so the second
    doesn't appear until the first has been successfully answered.
    Configure the start point just beyond the pause point. Repeat the
    process for each text box.
    Hopefully this helps... Rick

  • Multiple mp4 files in one Slide

    When I place two mp4 files in one slide, neither one plays. Each play fine in a separate slide, but grouped together they do not.
    Any idea why?

    Hi Craig!
    I'm good and I hope you and your family are fine too. I am happy to hear you back on MacBreak Tech, I always enjoyed the discussion and missed the podcast when it was down.
    The situation are two small (1-2 meg)mp4 files, and we're placing them one on top of the slide and one below it, sort of a comparison view. They should both play at the same time on the slide, and all we're getting is the background color of the slide showing. When we played them on the slide separately, no problems.
    It is the oddest thing I ever saw. These files were originally avi files that I converted back to mp4 format with h.264 so I could more easily work with them in Keynote and then eventually, FCP. If you have any wild ideas, I'm all ears.
    Thank you and nice to hear from you again.

  • Multiple rollover areas on a slide, only one works

    Hi all,
    Long time reader, first time poster. I have been looking through all the forums and can't find a solution for this issue.
    I have a slide with six rollover captions, arranged in two rows of three. Beneath each rollover caption is a regular caption containing a statement; the viewer is intended to mouse over the statement, and the rollover will pop up a caption saying whether the statement is true or false. After ten seconds a button appears and pauses the slide, and the viewer can click the button to go to the next slide.
    When I preview the project, only the top left of the boxes works right away as intended. Then after ten seconds, the button appears, and the other five start working just fine. One weird thing is that during that first ten seconds, the mouse cursor still changes to a hand icon on all of the rollovers, so it recognizes that they are there, but nothing pops up.
    The issue seems to have to do with the button, but I have tried adjusting its timing, its order in the layer stacks, I have tried deleting the button, I have tried copying all the elements except the button to a new slide, and I'm still getting the same problem, and the buttons start working properly at the ten-second mark regardless of where the button is. All the rollover captions and rollover areas have identical properties as far as I can tell. The rollover areas are at the top of the layer stack, and are not overlapping. The top left (on the stage) is always the only one that works properly, no matter how I arrange them in the layer stack.
    I have tried everything I can think of. Now I humbly turn to you. Shot of my timeline below. Thanks in advance!
    -JB

    Are there any objects on earlier slides that are set to Rest of Project that might be overlapping your hit areas on this slide?
    For example, something that caused a similar issue once was having a widget on an earlier slide.  The widget in question (Adobe Course Companion) was set to Rest of Project and ended up obscuring the hit area of interactive objects on later slides.  Not sure if this helps, but if you were able to paste these Smart Shapes into a different single slide project and they still didn't work there, then my idea probably wouldn't be an issue either.  This might be one of those issues that only happens on a MAC.

  • Multiple Audio files on one slide

    Hello,
    I want to have multiple audio files in a table on a single slide.
    Also, these audio files should play when I click on that particular file (which will be placed in a cell in the table)
    How do I do this?
    I see an option with "Play sound on click" but it plays when I click anywhere.
    This doesn't give me the ability to place multiple files and thus be able to play them as needed.
    Thanks.

    nope, Keynote doesn't have "triggers" though I figure this has to be on Apple's radar as it's been brought up every time a new version comes out.
    I suppose one work around would be to make a slide for each sound, and have the sound play when you go to that slide. Then make your table a series of buttons that go to each "sound slide" (you can make link buttons, just not triggers). It would give you the effect of clicking to play the sound, it's just that instead, Keynote would be jumping to a slide and playing a sound. All the slides would LOOK the same, and you wouldn't use transitions between them. The effect would get you what you want, it just takes longer to build.

  • How can I get multiple likert questions on one slide?

    Hi,
    I have 9 questions I want to ask in a Likert survey in Captivate 7.
    When I insert a Likert question slide, it defaults to only show 1 question per slide.
    I want the learner to see all  9 questions on 1 slide.
    Can anyone tell me how to do this?
    thanks!

    In Captivate 7, if you select the Likert scale and go to the Quiz Properties tab, under the General tab you can change the Answers from 1 to a higher number and get a nice list of items to go with your disagree to agree list.
    That's my relevant to the thread comment and here for posterity to anyone looking for the answer to it.
    But I came here because I want a total from the Likert and it doesn't exist during the lesson, since it doesn't report scoring back to the student.
    I've been reading your older blogs. Lilibiri, great stuff that makes me wish there were a simpler way in the newer version, but I can't find it. Basically we are creating a question series that becomes a self evaluation checklist, and want to assign the point range to the answers, 1 for disagree up to 5 for Agree, adding up "positive traits".
    Was originally thinking of using multiple choice set as a pretest but there's a bunch of variables and actions to write for that, and I saw your post about a simple text entry, which looks more manageable and I'll have to figure that out.
    But the simple clean familiar look of the Likert ... I wish there were an easy way to just get those numbers in a total, now that it's in version 7 even. So annoying that it pushes my procrastination button and I don't even want to work on the rest of my lesson!

  • Multiple click boxes on one slide; Pausing project

    I'm using Captivate 5.5. 
    I have four click boxes on a slide.  Three click boxes upon clicking show an image and then show a success caption.  The forth click box shows a success caption but also is set to "pause project until user clicks." 
    Unfortunately, if any of the three click boxes are clicked it advances the playhead even though the forth click box was never clicked.  How can I pause the project until only the forth click box is activated no matter if the other three click boxes have been previously clicked?

    Hello,
    Default behavior of click boxes is to trigger the simple action that is assigned to it AND at the same time to release the play head. Even if those 3 click boxes had a pause, at the same moment as the fourth, this would have happened. If you put the pausing point of the fourth click box later than the pausing of the first three, it will work fine if the user clicks only one out of 3 click boxes.
    If you replace the simple action by a (eventually one-line) advanced standard action, the play head is not released:
    http://blog.lilybiri.com/why-choose-standard-over-simple-action
    http://www.youtube.com/watch?v=M3nKi-DB6Fw
    Lilybiri

  • Multiple failure captions on one slide...?

    Can anyone offer any advice with this please?
    I use Captivate 3 to produce training for software applications. In the past I have tried to limit the amount of buttons and/or click boxes that have failure captions to a maximum of one or two per slide. This is purely to prevent the problem where a previous failure caption appears when an incorrect option is chosen later on in the same slide, even where the click box/button is clearly separated from the next one on the time line and the 'focus' is changed as well. This removed the problem but incresed the file sizes
    So, in trying to keep the filesize of my software application movies down I have started building cp files where I have fewer slides with graphic elements appearing and disappearing throughout....the difference in the published files is huge but I now have the problem back where I may have several failure captions corresponding to several click boxes/buttons on the same slide. The 'bad behaviour' is that, again, the first failure caption will appear all the way through any incorrect choices made on any of the remaining click boxes/buttons on that slide.
    I have separated all the buttons etc. from each other on the time line but the problem persists. Can I really only have one or two click boxes/buttons with a failure caption on each slide or am I missing something?

    Hi there
    Have you examined the properties for the objects and enabled the pause for the failures?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • How can I create a collage of multiple photos on one slide using Premiere Elements 4.0?

    Hi all!
    I recently bought Adobe Premiere Elements 4.0. I'm having trouble with something and was wondering if anyone could offer any assistance?
    I'm creating a slideshow using photos and videos, but with my photos I want to be able to create a few collages, by using multiple photos on the one slide. Usually you just have one photo on the screen and it moves on to the next one, but I'd like to have eg. the occassional slide that I can have say 4 photos overlapping onto each other, like a photo collage. Does this make sense and does anyone know how I can do this? I've searched the instructions and can't figure it out and the Adobe support line said they couldn't tell me but pointed me to this forum...
    Any help would be much appreciated!
    Thanks :)

    There are basically two ways, with a variation, to do this.
    First, you could size the still images in Photoshop, or other, for the size needed on your Project's screen and then use Motion to position the image where you want it. The variation on this would be to use Motion>Scale to size the image and then Motion to place it where you wanted. You would stack the images on various Video Tracks as necessary.
    The other way would be to place the images on the correct Video Track and use the Track Matte to limit the view of that image. You will probably use one of the two variations from the first way (Motion>Scale and/or Motion) to get the image where you want it, but then the Track Matte (building in Titler is easy) to eliminate any extraneous image data.
    Hunt

Maybe you are looking for