Multiple Rows Selection In Advance Table

Hi All,
I have a requirement to select multiple rows in advance table.After selection these rows they get added to the record list of another page on click of seeded submit button.This is my custom region.And this functionality is working for seeded region.
I have added multiple selection component in advance table component.
How should I make this functionality work for my custom region using the seeded submit button.
Regards,SHD

Hi,
After selection these rows they get added to the record list of another page on click of seeded submit buttonon the click of submit button save the data to the table from where u are getting the data for the other page....Once this data get saved to the table, will definitely shows up in next page.
Regards,
Gyan

Similar Messages

How to capture indexes of multiple rows selected in Advance list

Hi,
- I have a prefilled advance list with multiselection enabled.
- There is a button, associated with an action,which is bind to a eventHandler,that event Handler has script operation which conains the ruby scrpt code.
- Now when i select multiple rows of that advance list and click on the action,I want to capture the indexes of all the selected rows.
I tried using following ruby code:
lead=$data.datalist.LeadSelectedIndex
But it returns index of only first row selected out of various rows selected.
So please anyone help me on that.
Regards ,
Saurabh Sharma.

In FP2.6 there is no chance from SDK to have a mass enabled Action and bind to a mulli selection list as a BO Action in the UI Designer, as multiplicity will always be single and only lead selection would be selected.
this feature comes only in FP3.0.
So i am not sure what excatly Saurabh wants to do : maybe do some calculations based on multi seletions then i would do the following as also what Christian mentioned
multiSelect = ($data.DataList.GetSelectedRowsCount() > 1);
NoOfRowsSelected = $data.DataList.GetSelectedRowsCount();
SummationField = 0;
if ( multiSelect )
   LeadSelection = $data.DataList.LeadSelectedIndex;
   RequiredDataField = $data.DataList.Get(LeadSelection).AnydataField;
   for i in 0..(NoOfRowsSelected - 1)
     currentRow = LeadSelection + i;
      RequiredDataField = $data.DataList.Get(currentRow).AnydataField;
// imagine this is just add values of the RequiredDataField
     SummationField = SummationField +   RequiredDataField
   end
end
So i have not tried this directly - but i hope i make the idea clear.
Regards,
Nitesh Pai

Multiple row selection in ADF Table using addition column with checkbox

I am using ADF table(Jdeveloper11g) and i want to selecte multiple rows it may be more than one OR all rows.
For that i added one Column to the table with Header Delete and checkbox
<af:table....
<af:column sortProperty="Delete" headerText="Delete" width="100"
sortable="false">
<af:selectBooleanCheckbox label="#{row.favoriteId}"
valueChangeListener="#{Mybean.onCheck}"
id="checkbox" autoSubmit="true">
</af:selectBooleanCheckbox>
</af:column>
</af:table>
backing bean:Here i added code to get Value of one column with id favoriteId and use an arrayList(listForDelete) to monitor the state of the checkboxes
public void onCheck(ValueChangeEvent valueChangeEvent) {
BindingContainer bindings = getBindings();
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterBind =
(DCIteratorBinding)bindings.get("getUserFavoritesByUserIDIterator");
if (iterBind != null && iterBind.getCurrentRow() != null) {
RichSelectBooleanCheckbox ch = (RichSelectBooleanCheckbox)valueChangeEvent.getSource();
if (!ch.isSelected()) {
Long issueId = (Long)iterBind.getCurrentRow().getAttribute("favoriteId");
listForDelete.add(issueId);
else
Long issueId = (Long)iterBind.getCurrentRow().getAttribute("favoriteId");
listForDelete.remove(issueId);
Problem is that when i select single row checkBox, onCheck() method of backing bean gets called multiple times(equals to the number of rows)
I think this is beacuse of <af:selectBooleanCheckbox id is same that is "checkbox" but i am not sure.Even i tried to assign some unique id but no any success in assigning Id with value Expression.
I also find related post
Re: ADF Table Multiple row selection by Managed Bean
but that is related to Select All rows or Deselect all rows from table.
From the simillar post i follow the steps given by Frank.but problem with below step
->have an af:clientAttribute assigned to the checkbox with the following EL #{row.key} ,here I added <af:clientAttribute name="#{row.key}"></af:clientAttribute> and i am getting error
Error(64,37): Static attribute must be a String literal, its illegal to specify an expression.
Please let me know if any one had already implemented same test case.
Thanks for all help
Jaydeep
Edited by: JaydeepJ on Aug 7, 2009 4:42 AM

just to update after the rollback is called in the cancel button i wrote following code which does not change the row focus to the first row
DCBindingContainer bc =
(DCBindingContainer)BindingUtils.getBindingContext().getCurrentBindingsEntry();
DCIteratorBinding profItr =
bc.findIteratorBinding("ProfileSearchInstIterator");
Row cRow = profItr.getRowAtRangeIndex(0);
if(cRow != null){
System.out.println("Current row is not null so fixed ");
profItr.setCurrentRowIndexInRange(0);
RowKeySetImpl rks = new RowKeySetImpl();
ArrayList keyList = new ArrayList();
keyList.add(cRow.getKey());
rks.add(keyList);
profileTable.setSelectedRowKeys(rks);
AdfFacesContext.getCurrentInstance().addPartialTarget(profileTable);
}

Retrieving multiple rows selected from a table

I want to retrieve selected multiple rows from a table and pass it to other views. Does anyone know how to implement this

You could try a simple example:
Create a context node "Rows" with a string attribute "Text". Create some node elements in wdDoInit().
Create an action "ShowSelectedRowIndices" and implement the event handler as follows:
//@@begin javadoc:onActionShowSelectedRowIndices(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionShowSelectedRowIndices(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionShowSelectedRowIndices(ServerEvent)
 StringBuffer msg = new StringBuffer("Multi-selected rows:");
 for (int i = 0; i < wdContext.nodeRows().size(); ++i)
 if (wdContext.nodeRows().isMultiSelected(i))
 msg.append(" ").append(i);
 wdComponentAPI.getMessageManager().reportSuccess(msg.toString());
 //@@end
When executing the action (e.g. with a button) you will see the selected indices in the message area.
Regards, Armin

How can i update multiple row in a advance table

Dear all,
hope you are well enough.
suppose i have a table in a OA page where there are several transactions.
i would like to add a check box in front of every row.
when i check the transactions(rows of OA pages) and submit then one column of a table will be updated in database.
how can i implement that.
Please explain
Regards,
Mofizur

Hi,
Refer below code for iteration:
OAViewObject appVO = (OAViewObject)am.findViewObject("ApprovalsWVO1");
OARow row = (OARow)appVO.first();
for(int i=0;i<appVO.getRowCount();i++)
String appStatus=appVO.getCurrentRow().getAttribute("ApprovalStatus").toString();
if(appStatus.equalsIgnoreCase("NEW"))
newRow.setAttribute("appTrans",Boolean.FALSE);
else
newRow.setAttribute("appTrans",Boolean.TRUE);
System.out.println(appStatus);
row = (OARow)appVO.next();
Regards
Meher Irk

Multiple row selection for table element

Hi,
I have a requirement where I require to select multiple rows from a table element in a WD for abap application.
I have defined a node with cardinality and selection set to 1..n.
The contex node contains 4 fields : emp_name, pernr, manager and position.
The attributes of the table element for selectionmode is set to 'multi' and 'selectionchangebehaviour' is set to 'auto'.
I have defined an action on the 'onleadselection' event.
The code in this method also includes the statement 'lo_el_team_view->set_selected( EXPORTING flag = abap_true ).'
When I execute the application only 1 row is highlighted at any one time when I select it. You can select multiple rows by holding down the 'ctrl' key but I want to avoid having to do this. Is there anything I have missed out causing multiple row selections not to be all highlighted.
Thanks in advance for any assistance.

Hi raj,
you can try the following code in the 'onleadselect' event of the table,
create one attribute ' Flag' of type WDY_BOOLEAN under the node which has been binded to the table.
DATA lo_nd_node_tab1 TYPE REF TO if_wd_context_node.
DATA lo_el_node_tab1 TYPE REF TO if_wd_context_element.
DATA lo_elements TYPE wdr_context_element_set.
DATA lo_ele_select_new TYPE REF TO if_wd_context_element.
DATA lv_deselect TYPE wdy_boolean.
DATA lv_flag TYPE wdy_boolean.
DATA lv_select TYPE wdy_boolean.
DATA lv_index TYPE i VALUE 0.
lo_nd_node_tab1 = wd_context->get_child_node( name = wd_this->wdctx_node_tab1 ).
get the current selected element
lo_ele_select_new = wdevent->get_context_element( name = 'NEW_ROW_ELEMENT' ).
CHECK lo_ele_select_new IS NOT INITIAL.
check whether it has been selected or not
CALL METHOD lo_ele_select_new->is_selected
    RECEIVING
      flag = lv_select.
lo_ele_select_new->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_deselect ).
check whether element has been previously selected or not,if not, set the flag to select it
IF lv_select IS NOT INITIAL AND lv_deselect IS INITIAL.
    lo_ele_select_new->set_attribute( name = 'FLAG' value = 'X' ).
if selected currently and previously then set the flag as false,in order to delect it
ELSEIF lv_select IS NOT INITIAL AND lv_deselect IS NOT INITIAL..
    lo_ele_select_new->set_attribute( name = 'FLAG' value = ' ' ).
ENDIF.
CALL METHOD lo_nd_node_tab1->get_elements
    RECEIVING
      set = lo_elements.
according to the falg, select and delect the elements
LOOP AT lo_elements INTO lo_el_node_tab1.
    lo_el_node_tab1->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_flag ).
    IF lv_flag = 'X'.
      lo_el_node_tab1->set_selected( abap_true ).
      lo_nd_node_tab1->set_lead_selection_index( lv_index ). * this statement deselects the lead selection index*
    ELSE.
      lo_el_node_tab1->set_selected( abap_false ).
      lo_nd_node_tab1->set_lead_selection_index( lv_index ).
    ENDIF.
ENDLOOP.
I hope this resolves your problem.
Thanks,
krishna

Multiple row select for table not working..

Hi Experts,
I have a table in ABAP Web Dynpro where I have enabled the multiple row select functionality. I can select all and deselect all. I can also select a block of adjacent rows of table by choosing first and last by pressing Shift key.
But I am not able to select multiple individual records for that table.
I tried the same thing in different system and it works fine there.
Please let me know if we are missing some standard plugin or we need to enable this in some settings.
System where the issue is:
SAP_APPL: release 600, level 18
SAP_BASIS: Release 700, level 22
System where it is working fine:
SAP_APPL: release 604, level 8
SAP_BASIS: release 701, level 8
Regards,
Anand Kolte

Hi
Press CTRL key and Select records, you can select multiple records, continuously or randomly your desired selection.
Cheers,
Kris.

Multiple row selection capability in the table

Hi
I have a group with table layout style and I want to set the rowSelection property of the generated table to "multiple" but it seems that there is no way to do that from JHs unless using the group as LOV, which is not desired for me. Here is the code which sets this property in tableGroup.vm :
#if (! ($JHS.current.group.useAsLov && $JHS.current.group.multiSelect))
selectionListener="#{#BINDINGS_TABLE().collectionModel.makeCurrent}"
rowSelection="single"
#if( ! $JHS.current.group.useAsLov )
selectedRowKeys="#{#TABLE_BEAN().selectedRow}"
#end
#else
rowSelection="multiple"
selectedRowKeys="#{#LOV_PAGE_BEAN().selectedRowKeySet}"
selectionListener="#{#LOV_PAGE_BEAN().selectionListener}"
#end
Is there any reason to not allowing to have multiple row selection capability in the table when it is not in LOV mode?
Thanks
Ferez

Ferez,
No, but if you want to have multiple selection, there is typical a custom action you want to apply to the selected rows, which cannot be defined in the Jheadstart Application Definition editor.
However, it is perfectly fine to use a custom tableGroup.vm template and enable multi-selection.
Steven Davelaar,
JHeadstart team.

Extract Multiple Rows from a Single Table into a Single Row in a New Table

I have a table in a database that contains contact data like name, address, phone number, etc.
The folks who designed the database and wrote the application wrote it so that all contact records are placed in that table, regardless of contact type. In fact, the contacts table does not even have a column for "type" even though there are many
different types of contacts present in that table.
I am trying to write a mail merge style report in SRSS, that gets sent to a specific type of contact, based on criteria provided that must be obtained from another table, and that data is then used to get back to a specific set of contacts from the contacts
table.
The attached file directly below describes my problem and all related information in an extremely detailed way.
SRSSMailMergeIssue.pdf
Unless there is a way to make a SRSS Tablix point to two different data sets in SRSS, it looks like I have to combine multiple rows from the same table into a new table.
If anyone can review the details in the attached pdf file and possibly point me in the direction I need to run to solve this probelm, I would greatly appreciate it.
I also included a document (below) that shows the tables I reference in the probelm description.
dbtables.pdf

I found a solution.... and posted it below
select
dk.ucm_docketnumber [UCM DocketNumber],
dk.ucm_docketid [UCM DocketID],
vc.FirstName [Victim FirstName],
vc.MiddleName [Victim MiddleName],
vc.LastName [Victim LastName],
vc.Suffix [Victim Suffix],
vc.Address1_Line1 [Victim AddressLine1],
vc.Address1_Line2 [Victim AddressLine2],
vc.Address1_Line3 [Victim AddressLine3],
vc.Address1_City [Victim City],
vc.Address1_StateOrProvince [Victim StateProvince],
vc.Address1_PostalCode [Victim Postalcode],
oc.FirstName [Offender FirstName],
oc.MiddleName [Offender MiddleName],
oc.LastName [Offender LastName],
oc.Suffix [Offender Suffix],
oc.Address1_Line1 [Offender AddressLine1],
oc.Address1_Line2 [Offender AddressLine2],
oc.Address1_Line3 [Offender AddressLine3],
oc.Address1_City [Offender City],
oc.Address1_StateOrProvince [Offender StateProvince],
oc.Address1_PostalCode [Offender Postalcode],
pc.FirstName [Arresting Officer FirstName],
pc.MiddleName [Arresting Officer MiddleName],
pc.LastName [Arresting Officer LastName],
pc.Address1_Line1 [Arresting Officer AddressLine1],
pc.Address1_Line2 [Arresting Officer AddressLine2],
pc.Address1_Line3 [Arresting Officer AddressLine3],
pc.Address1_City [Arresting Officer City],
pc.Address1_StateOrProvince [Arresting Officer StateProvince],
pc.Address1_PostalCode [Arresting Officer Postalcode]
FROM ucm_docket dk
left outer join ucm_victim v on dk.ucm_docketid = v.ucm_docketnumber
left outer join contact vc on vc.contactid = v.ucm_victimlookup
left outer join ucm_offender o on o.ucm_offenderid = dk.ucm_offenderlookup
left outer join contact oc on oc.contactid = o.ucm_individualid
left outer join contact pc on pc.contactid = dk.ucm_ArrestingOfficerLookup
WHERE (dk.ucm_docketnumber = @DocketNUM)

ALV Grid multiple row selection, disabling some

Does anyone know if it is possible to have an ALV grid with multiple row selection allowed but for some rows the row selection is disabled?
Kind regards,
John.

Hi John,
You can add a check box and select multiple rows. I am using the same technique. I have used OO.
a) Use Even handler "Double Click"
b)Using "SELECT_ALL_ENTRIES CHANGING PT_OUTTAB TYPE STANDARD TABLE" and I am sorting based Check box selection.
Need more help please let me know. I will send you the code.
Lanka
Message was edited by: Lanka Murthy

Disabling multiple row selection in JTable

hi,
I have a JTable and I want to disable the multiple row selection.
I used
getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);and this working fine with ctr+clicking on a row
but if i am using shift key instead of Ctrl key multiple selection is possible....
Any idea y?and how to resolve it??
thnx
~neel

Use table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);I don't know if it differs but I use it and I don't have the problems you describe. Might be a bug in your Java version?!
Message was edited by:
pholthuizen

Reg Row Selection in a Table

Hi All,
I am facing a problem with row selection in a table. When I navigate from one screen to another in my application, the selected rows in the previous screen should be populated in the table in the next screen.
If I have to use checkboxes inside the table for multiple row selection, how could I populate the table in the next screen with all the selected rows of the table from the previous screen.
Also, is it possible to select multiple rows in a table without using checkboxes, and by selecting the "selection mode" of table as "multi", so that initially when the page is loaded no record (row) should be selected automatically.
Please help me regarding this.
Regards,
Murthy.

Hi,
As Armin suggested you can use the inbuilt multiselection property of the table.
For populating the selected values in a table in second view
First view Context structure
-EmpDetails (Table node) (cardinality 0..n,selection 0..n,intializeleadSelection - false)
---EmpID (table column)
---Name (table column)
Second View Context structure
-DispalySelected (Table node)-EmpDetails (Table node) (cardinality 0..n,intializeleadSelection - false)
--- ID(table column)
--- Name(table column)
create a navigation link form first view to second view
In the InBoundPlug of second view
 wdContext.nodeDisplaySelected().invalidate();
 for(int i=0;i<wdContext.nodeEmpDetails().size();i++)
 if(wdContext.nodeEmpDetails().isMultiSelected(i))
 IPrivateDisplayView.IDisplaySelectedElement ele = wdContext.nodeDisplaySelected().createDisplaySelectedElement();
 wdContext.nodeDisplaySelected().addElement(ele);
 ele.setID(wdContext.nodeEmpDetails().getEmpDetailsElementAt(i).getEmpID());
 ele.setName(wdContext.nodeEmpDetails().getEmpDetailsElementAt(i).getName());
For multiselecting you have to use Ctrl tab

Insert multiple rows into a same table from a single record

Hi All,
I need to insert multiple rows into a same table from a single record. Here is what I am trying to do and I need your expertise. I am using Oracle 11g
DataFile
1,"1001,2001,3001,4001"
2,"1002,2002,3002,4002"
The data needs to be loaded as
Field1      Field2
1               1001
1               2001
1               3001
1               4001
2               1002
2               2002
2               3002
2               4002
Thanks

You could use SQL*Loader to load the data into a staging table with a varray column, then use a SQL insert statement to distribute it to the destination table, as demonstrated below.
SCOTT@orcl> host type test.dat
1,"1001,2001,3001,4001"
2,"1002,2002,3002,4002"
SCOTT@orcl> host type test.ctl
load data
infile test.dat
into table staging
fields terminated by ','
( field1
, numbers varray enclosed by '"' and '"' (x))
SCOTT@orcl> create table staging
2    (field1 number,
3     numbers sys.odcinumberlist)
4 /
Table created.
SCOTT@orcl> host sqlldr scott/tiger control=test.ctl log=test.log
SQL*Loader: Release 11.2.0.1.0 - Production on Wed Dec 18 21:48:09 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Commit point reached - logical record count 2
SCOTT@orcl> column numbers format a60
SCOTT@orcl> select * from staging
2 /
    FIELD1 NUMBERS
         1 ODCINUMBERLIST(1001, 2001, 3001, 4001)
         2 ODCINUMBERLIST(1002, 2002, 3002, 4002)
2 rows selected.
SCOTT@orcl> create table destination
2    (field1 number,
3     field2 number)
4 /
Table created.
SCOTT@orcl> insert into destination
2 select s.field1, t.column_value
3 from   staging s, table (s.numbers) t
4 /
8 rows created.
SCOTT@orcl> select * from destination
2 /
    FIELD1     FIELD2
         1       1001
         1       2001
         1       3001
         1       4001
         2       1002
         2       2002
         2       3002
         2       4002
8 rows selected.

Handle multiple rows selection on Matrix

Hi all,
i'd like to know if someone could help me with multiple selections on matrix via shift + left mouse button on a matrix.
I got a matrix with one column containing a checkbox for selection. The matrix, on a UDO Form, is defined as auto selecting, so multiple selection of rows is allowed.
I want to add the rows selected by the checkbox (using shift + left mouse button on the selection start and selection end) column to the matrix selected rows collection.
Is there any chance to catch an event handling this situation?
I can add the rows in the matrix selected rows collection clicking the checkboxes one by one, but when i use the multiple selection i can't get any event handling this.
I know i couldn't use the checkbox for the selection and use instead the native function of sap b1 matrix., but this way is faster (and more clear, because you see the check when a row is selected) when you have multiple rows selected one by one
I hope i've been clear enough, and hope somene can give me an hint.
Thanks in advance.

Hi Cesidio,
if I understand you correctly you want to select one row than shift+mouseclick some rows lower and the result should be, that all rows are selected ?
You can achieve this by catching the itempressed event and querying pVal.Modifiers.
This is an example for Grid :
private void Grid0_PressedAfter(object sboObject, SAPbouiCOM.SBOItemEventArg pVal)
 if (pVal.Modifiers == SAPbouiCOM.BoModifiersEnum.mt_SHIFT)
 int lastRowSelected =Grid0.Rows.SelectedRows.Item(Grid0.Rows.SelectedRows.Count-1,SAPbouiCOM.BoOrderType.ot_RowOrder);
 if (lastRowSelected < pVal.Row)
 for (int i = pVal.Row; i > lastRowSelected; i--)
 Grid0.Rows.SelectedRows.Add(i);
regards,
Maik

Multiple rows selection handling in Tableview

Hi guys,
..Good morning ..
I have developed one page for displaying Employees(pernr and Ename) under CEO/VP/Managers using TableView.
Here i have some difficulties.
1. I managed to show Multiple row selection menu
 (Selectall/deselectall) right upper corner of
 Tableview. but i can also select multiple rows not all
 at a time .So in this case ,those selected employees
 Overtime amount i want to show in the next page.here
 my question is How do i capture selected rows(not all
 at a time).
 I am using this code ..
<htmlb:tableView id = "tvX"
 headerText = "Employee List"
 headerVisible = "true"
 idth = "30%"
 selectedRowKeyTable = "<%= selectedRowKeyTable %>"
 onRowSelection = "MyEventRowSelection"
 sort = "server"
 keepSelectedRow = "TRUE"
 selectionMode = "MULTISELECT"
 table = "<%= i_emp_1 %>" >
<htmlb:tableViewColumns>
<htmlb:tableViewColumn columnName = "pernr"
 width = "10"
 sort = "server"
 horizontalAlignment = "center"
 title = "Emp No"
 type = "TEXT" >
</htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName = "ename"
 width = "40"
 sort = "server"
 horizontalAlignment = "center"
 title = "Emp Name"
 type = "TEXT" >
</htmlb:tableViewColumn>
</htmlb:tableViewColumns>
</htmlb:tableView>
2. How to send one Itab data from one page to
 another page.Presently i am using EXPORT/IMPORT
 statements.Is this right way or any other method is
 there for?.
Could you please look in to this ..
Best regards,
Venkat.O

Hi Venkataiah,
See page TableViewMultiSelect.bsp in BSP application SBSPEXT_TABLE.
There is an attribute selectedRowIndexTable in tableView element. you have to assign a table of type INT4_TABLE, and you can fill this table by table_event->PREVSELECTEDROWINDEXTABLE in OnInputProcessing event. For more details see the above mentioned bsp application.
To Export/Import is ok, you can use server-side cookies also, But best way is using model binding. Learn MVC for that.
Hope it solves your problem.
Regards,
Narnder Hartala

Multiple Rows Selection In Advance Table

Similar Messages

Maybe you are looking for