Multiple Safari issues

I've been experiencing a few issues lately but not sure they're related.
1. I receive emails that will not always display the pictures (sometimes they're viewable). Instead, I get the blue box with a question mark. However I can view the same email without issue using my iPhone and iPad, or even from a different email account (I forwarded the email to another one of my accounts to narrow down if it's an email issue, Safari issue or something else).
2. Safari freezes at some point almost everyday and I get the spinning ball. Most of the time, I can't click on other applications so I'm forced to perform a Force Quit. I haven't noticed a pattern such as specific sites, adobe related, etc. It's very frustrating.
3. The overall system performance is slower than it used to be. Sites that used to come up quickly will now sit and wait.
I cleared my cache, and removed a webpageicons.db file based on suggestions in this forum but haven't noticed any changes.
Anyone have any input about my issues?
Thank you!

Hi,
The overall system performance is slower than it used to be. Sites that used to come up quickly will now sit and wait.
Check the startup disk for problems, it may need repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
Mac OS X (10.6.2) <---- Your profile.</div>
If you are running v10.6.2, you need to udpate your system software. Click the Apple () menu (top left in your screen) Software Update ...
Carolyn

Similar Messages

Multiple Safari hangs after installing Snow Leopard

I had 5 Safari hangs today within hours...never had one since I bought the machine in June 2009 with Leopard installed...Since the SL upgrade CD, I have had 2 system freezes that result in a complete shutdown to clear and multiple Safari hangs that I able to recover with a force quit..My daughter in college with the same machine reported that she had 3 system freezes in one day since SL...My wife who did NOT yet install the SL upgrade and is now blissfully having no problems at all and does not want to install the new OS (again same machine type, We bought 3of them in June after the announcement). I hope that this gets debugged and fixes provided...

Hi,
Mac OS X 10.5: What you can do if Safari quits unexpectedly
That links is for 10.5 but the trouble shooting will work in 10.6 also.
For system freezes try maintenance.
Maintaining Mac OS X
On the Macs you upgraded to SL, did you check to see if you had 3rd party software installed that might not be compatible? http://support.apple.com/kb/HT3258
Did you repair permissions after the upgrade?
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised

Nokia Lumia 822
Purchased yesterday (2/10/13)
So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
Issue 1 - Email account receives email but will not send. Error message goes something like <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
Issue 3 - I get to add email account I enter my information but no account is created
Issue 4 - I set up an account and I get an error message stating my information cannot be found.
Issue 5 - trying to open email from start screen just resets to start screen over and over and over NEVER opens the account.
These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
Issue 1 - I tap on a contact and get sent to the start screen over and over and over and over again.
Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
3) Scrolling thru any APP randomly takes me back to start screen.
I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
If I can't get these issues resolved. look like I'll be going back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.

Interesting Twitter conversation VZWSupport on Twitter. It was suggested to try a HARD reset - and if that doesn't work take the phone back.
Since I don;t have anything set up yet that's my solution.
I see a BlackBerry Z10 in my future

System Preferences and Safari issues

Hi I have a very concerning issue with system preferences and a smaller issue with Safari (7.0). When I open system preferences and navigate to the "internet accounts" page and try to remove an account or click the "Advanced" button, nothing happens. I see a faint flicker of the system prefs window but nothing changes. Another example is when I click on the "networks" page and try and open the "Advanced" window, nothing happens. I also can't sign out of iCloud or view my iCloud account information the buttons seem to do nothing. I've already tried installing mavericks again, deleting appropriate plists, resetting PRAM/NVRAM, repairing the disk and repairing disk permissions to no avail and I really need to find a solution. If this helps, the guest account does not have any issues described above. The safari issue is minor but when Safari opens, there is a gray box around the page title in the top bar of safari no matter what webpage im on. I have tried resetting safari, deleting caches and extensions but nothing works. I really appreciate any help with these issues.
Here is an example of the Safari issue.

Do you have the installer DVD? If you do:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the OS X Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.

Youtube and Safari Issues on iPad/Apple devices.

For the last few days I have had a problem with all my apple devices. For some reason Youtube videos will not play, I keep getting the message "This video is currently unavailable" when I try to play any video. This only happens on Youtube through Safari, the app on my 3gs works fine but the app is not for iPad. Another problem that I get only on my iPad is that Safari is acting all weird. When I try to click on a link nothing happens and when I press the back button it goes back 2 or more pages instead of the previous page like its supposed to. Steps I've tried to resolve the problem:
Force close the apps.
Force restart the iPad/All apple devices.
Reset all settings.
Restore iPad through iTunes.
None of the above steps have worked for me and I just don't know what to do. This only happens through wifi but I am certain their is nothing wrong with my wifi as my android devices and my laptop/desktop computer work fine when trying to view youtube videos. As I mentioned this is happening on all Apple devices which include:
iPad 2
iPhone 3gs
iPhone 5
iPod touch 4th gen.
The weird safari issue is only occurring on my iPad.
Any help resolving this issue would be greatly appreciated.

call your isp

Am using Safari 6.0.5, suddenly my Yahoo mail account won't keep me logged in and the 'keep me logged in' button has disappeared. It is still there on Chrome so am assuming it is a Safari issue. It just happened suddenly. Have reset Safari.

Am using Safari 6.0.5, suddenly my Yahoo mail account won't keep me logged in and the 'keep me logged in' button has disappeared. It is still there on Chrome so am assuming it is a Safari issue. It just happened suddenly. Have reset Safari, cache and also changed my Yahoo password but problem is still there.

I still don't understand what the problem that you are experiencing is. If you get to a page where yahoo is asking JUST for your password, and there is no box for username (it may have your username displayed, but not in a enter box), then you ARE "being kept signed in" You can verify this by instead of entering your password, go to www.yahoo.com home page, and it will say something like "Hi, Amber" This means you ARE signed in.
When you get that page asking for just your password, you are NOT being asked to sign in again. You are simply being asked to verify/enter your assword an Nth time. If you get that page right after entering your username and password, try clicking the "back" (previous page) button. It might just go to your inbox.
If this is the case, your problem has nothing to do with being kept signed in or not, the problem is that for some (unknown to me) reason, yahoo is asking you to re-enter your password, kind of like when your mac asks for your mac password when changing system settings. Yahoo does this as a safety feature when you go to account settings, and apparently abritary other times. I wish I understood just why I get it every time after signing in.
It could be because I have java turned off. It could be because I don't accept third party cookies. Maybe a cache file. Or a hundred other things... I don't know. It could simply be yahoo is scrooing safari users. I have glanced at the html, but to really understand it, it would take me days. There are over 25 places where username and password are in the html "source" code of the yahoo login page, and even understanding that may not tell me. In the past, I have seen code essentiall saying "if IE x.3.2" do this, if chrome do that, if mozilla do something else, otherwise make it next to impossible...."
My problem is not only I get asked for my assword a second time, but also (and only very recently) I do not get a prompt to save username and pasword. I have gone to yahoo help pages to try to figure it out, and I feel like I just run in circles. If one wants to send a question in, they have to answer half a dozen questions disclosing private information. And I pay yahoo $20/year. grrr
If when you are trying to access your yahoo mail and you are being asked to enter both your username and password, but didn't sign out of yahoo, then indeed your are not being "kept signed in"

Safari issues with online banking

my bank tells me that the issues with online banking are a Safari issue.

Feel free to read my thread here: https://discussions.apple.com/message/18057998#18057998

Multiple Goods Issue documents for single delivery?

Hi
I am getting multiple goods issue documents for single delivery.
In a order there are 3 line items, and one delivery is created and 3 goods issue documents.
What is the probable reasons for this.
The requirement is for one order with n items there should be one delivery document and one goods issue document.
Inputs requested.

Since you havent put the issue in details, I have listed my guessses.
This may be happening due to mainly these three reasons. Please answer them and get back to me.
1) The three Good issue may be happeneing due to split delivery active for the item. If yes then correction should be in the Material master.
2) the availability check scheduled is set in that way. If yes please configure the availability and transfer of requirement.
3) Scheduling of the goods throught that particular shipping point. If yes then please conficgure the shipping tab in Logistic Execution.
Please let me know if the problem persists and award points if solved.
Thanks
Adi

My dv5 laptop has an internal "typing" noise/multiple security issues

I'm not sure if this is a problem, but since I've had all kinds of issues with this particular model (the first Pavilion we were sent by HP had to be returned because the engineers finally deemed it unfixable), I thought I'd ask. I'm a little nervous about a sound that makes me think of little gremlins inside the unit typing away. It's not constant, but I'm wondering if that's normal and what the noise is.
Another problem is that periodically I'll get a message about the computer having "multiple security issues". I then do a virus scan, which turns out fine, so I don't know what it means.

The Intel chipset issue is not at all related for your Notebook. Its quite unfortunate you are facing this problem as I would say its a coincidence that even your second hard drive went bad so soon.
Time for you to RMA the new hard drive.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Safari issues being posted lately?

Maybe it's just me, but I've noticed there seems to be an increase of Safari issues with malware. Is there something leading to this? Maybe a common website breached? Just curious. But more to educate myself
FOR the record, I love Safari. It's my favorite browser!

Major reason is that there are more and more adware injecting sites nowadays.
Major Mac publications promote useless applications like MacKeeper to increase revenue.

Dept of Worforce Website and Safari issues

I was using the website, most everything works, but I get this on hyperlinks:
Error 404: SRVE0190E: File not found: /CSSWebHelp/CSS_Field_Level_Help/CSS_401K_MonthlyDistribution.htm>>cap=Field Level Help>>pan=1
any ideas?

No, 404 errors happen all the time, usually with the redesign of a web site, pages that were previously there are taken out or given a new home and people might still have the old page bookmarked, or the site designers didn't update the site navigation to redirect requests for the old page to the new one. It's definitely not a Safari issue; you'd get the same result with Firefox or any other browser.

Multiple CS6 issues

Hi -
At work we recently got upgraded to CS 6 and I've encountered multiple functional issues which have slowed our workflow down considerably.
1) Drag and dropping from either the color or line swatches on the bottom of the tool bar (at right) no longer works. Dragging and dropping from the color pallet (fill or line) does not work either. In order to change color of an object we either have to create a NEW object with the new line or fill color and eye dropper it, or select the object- go to the CMYK (or RGB) sliders and enter the numerical version of the colors we want. VERY tedious.
2) for the reasons listed in #1, the gradient tool has become nearly unusable. You simply can not drag new colors into the gradient to edit it at all. The gradient tool has always been somewhat difficult to use- with CS6 it has become useless.
3) there are numerous glitchy interface issues that have cropped in- just one is the PMS swatch libraries- trying to get the library to list by name does not work periodically and the search swatch by number option randomly disappears and reappears. Recently the option to search field has disappeared completely and scrolling through the PMS swatch book constantly jumps back to the top (PMS 100 yellow) when trying to select colors. This effectively makes using the PMS swatches useless. We've had to do a work around by importing shapes filled with certain PMS colors and eye dropper them as needed. Not a great way to work as you can imagine.
Has anyone else encountered these issues and are there work arounds? We've done re-installs and that has not helped so far. Please note they are not letting us upgrade to CS Cloud version so no help there either. yay.
Thanks in advance for any help!
David

David,
Did you reinstall using the full three step way?
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Multiple iPhone Issues

Hello,
I have been having multiple iPhone issues after updating my phone to iOS 6.1 and restoring it my phone number is grayed out on Facetime and iMessage in Settings and sometimes when I go to the app store the old app store design loads that was in iOS 5 and the search and updates and buttons below get reaaranged
It looks like that in messages and Facetime
NOTICE THAT THE EMAILS AND NUMBER ARED EDITED!
Please help me fix this issue

have you tried turning off imessage in settings and then turning it back on again to re-activate? have you tried resetting the phone by holding the sleep/wake button and the home button until the phone restarts?

Multiple freeze issues on my laptop

Hello.
I'm experiencing multiple freeze issues lately. Inspecting all logs available but found nothing.
1. sometimes gdm freezes while switching users in Gnome 3. I share my laptop with my wife, separate accounts. While switching from one user to another, somethimes gdm (screen with account names) hangs, in situations when both users are logged or one is not. Only thing that helps is to switch to console, log in and restart gdm.
2. I had issues with suspend, so I turned off suspend based on inactivity. Now sometimes when laptop has some idle time and is inactive, screen turns off. Then it hands, all leds are on, unable to wake (turn on display), nothing works, switching to console, nothing.
3. Total freeze while logging into Gnome 3 session of my wife. Black screen, all leds on, only hard turn off (long press power button).
I inspected all logs in /var/log, also .xsession-errors in both home folders of both users. Can't find anything .... I'm desperate. Please post some tips, how to log more. I can't even submit or search for some bugs as I can't determine even what is the cause.
My laptop is ASUS X50Z.
lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Packages installed -> http://pastebin.com/efUsSdr4
I will gladly post more info.

lsmod:
Module Size Used by
fuse 66858 2
ipv6 288122 24
ext3 191948 1
jbd 63179 1 ext3
uvcvideo 64995 0
videodev 85100 1 uvcvideo
media 10565 2 uvcvideo,videodev
v4l2_compat_ioctl32 8644 1 videodev
cryptd 8309 0
aes_x86_64 7508 2
aes_generic 26138 1 aes_x86_64
ecb 2073 1
btusb 11385 0
joydev 9895 0
bluetooth 150884 1 btusb
arc4 1410 2
ath9k 86553 0
radeon 994864 3
mac80211 221931 1 ath9k
ttm 54872 1 radeon
drm_kms_helper 25721 1 radeon
serio_raw 4294 0
i2c_piix4 8224 0
psmouse 55501 0
snd_hda_codec_realtek 282216 1
ath9k_common 1858 1 ath9k
drm 185736 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 5199 1 radeon
i2c_core 20460 6 videodev,radeon,drm_kms_helper,i2c_piix4,drm,i2c_algo_bit
pcspkr 1819 0
asus_laptop 14098 0
sr_mod 14951 0
ath9k_hw 304895 2 ath9k,ath9k_common
ath 14770 2 ath9k,ath9k_hw
cdrom 36553 1 sr_mod
r8169 45411 0
evdev 9530 10
cfg80211 165636 3 ath9k,mac80211,ath
sparse_keymap 3120 1 asus_laptop
k10temp 2883 0
processor 24224 0
thermal 7799 0
button 4470 0
ac 2344 0
video 11164 0
battery 6453 0
snd_hda_intel 22410 2
snd_hda_codec 80889 2 snd_hda_codec_realtek,snd_hda_intel
sp5100_tco 4568 0
shpchp 26281 0
mii 4059 1 r8169
pci_hotplug 25454 1 shpchp
snd_hwdep 6357 1 snd_hda_codec
snd_pcm 74368 2 snd_hda_intel,snd_hda_codec
rfkill 15498 4 bluetooth,asus_laptop,cfg80211
snd_timer 19544 1 snd_pcm
snd 58362 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6210 1 snd
snd_page_alloc 7153 2 snd_hda_intel,snd_pcm
vboxdrv 1790690 0
ext4 375413 2
mbcache 5881 2 ext3,ext4
jbd2 70667 1 ext4
crc16 1359 2 bluetooth,ext4
sd_mod 28275 3
usbhid 35352 0
pata_acpi 3376 0
hid 82435 1 usbhid
ohci_hcd 21714 0
pata_atiixp 3928 0
ahci 20005 2
libahci 19559 1 ahci
libata 166724 4 pata_acpi,pata_atiixp,ahci,libahci
ehci_hcd 40794 0
usbcore 144144 6 uvcvideo,btusb,usbhid,ohci_hcd,ehci_hcd
scsi_mod 132794 3 sr_mod,sd_mod,libata
dm_mod 69692 12
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Bratislava"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(dm-mod vboxdrv)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="gorgoroth"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng netfs crond dbus gdm networkmanager @dropboxd sshd cupsd)

Safari issue: Multiple browser pages from the past are resident!

Having an issue with safari. When i open up the app, there are 7 previous pages that were accessed in the past that are open. I have tried to delete cookies, history, hard reset, etc. I can close out all of the previous open pages but the next time that a reset or power cycle is performed, they reappear! Has anyone experienced this same issue?
Scott

In Safari, press the little number icon in the lower right (I think the number tells how many windows are open). Then you can browse those windows (use your finger to move back and forth). Press the red X on any that you want to close.
That's what I do.

Multiple Safari issues

Similar Messages

Maybe you are looking for