Multiple SAP component transport strategy

Hi all,
I have a SAP landscape with ERP, BW, F&R and DM. Each of these components has 2 instances (dev and quality/test). The transports between these instances are managed with the TMS, aren't they??
But my real problem is that I don't know how to define the transports between components. I have read something about RFCs between ERP and BW instances. Is the same with F&R and DM??
Thank you.

Hi,
Rarely, a customization done for ECC appy to BW or any other system...
Anyhow if you found a case where you need to apply the same changes to all the systems you can release the transport and copy the cofile and data file to the target systems...
1. release the transport (with the customization or whatever changes you want to export)
2. go to \usr\sap\trans\<sid>\cofile and \usr\sap\trans\<sid>\data of the source system and look for the transport... cofile <sid>K<transport number>, data file <sid>R<transport number>.
3. copy the cofile and datafile to the \usr\sap\trans\<sid>\cofile and \usr\sap\trans\<sid>\data of the target system.
4. Then just go to STMS -> Extras -> Other requests ->Add
5. Transport and distribute.
Regards
Juan
Please reward with points if helpful

Similar Messages

SAP-XI Transport Strategy

Hello
Can anyone please point me to SAP-XI transport strategy document. e.g what would you transport, what tool would you use etc.
Thanks.

Hi,
We have two options
-- one is File transfer method through which we can export the objects into a file and that can be imported in another.
here we can export individual obeject and SWCv wise,namespace wise also.
-- Another one is CMS
through this option tracks are to be defined from DEV-QA-PROD
see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Also...
How to configuring the CMS for XI?
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Where can I get installation files of DTR, CBS, and CMS?
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
'How ToTransport XI Content Using CMS'.
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards
Chilla
reward points if it is helpful..

Transport strategy for BOE landscape

I am looking for a transport strategy for BOE landscape from security viewpoint. Basically we want to transport crystal reports, webi reports and folders along with security principles (BW roles/users included). Can anybody provide more info on this?
Regards,
Prasad

Yeah...we have LCM (XI 3.1 onwards) and Import Wizard for BOE tranports. But if we use BW roles as principles, transporting reports/folders with Security doesn't give desired results.
For example, if I am transporting a webi report with principle DEV001@RoleA from Dev to QA/PRD, I would get a new group in QA with name DEV001@RoleA instead of QAS001@RoleA. *I am looking for a pointer change here from DEV001 to QAS~001*. I think we have this feature of changing system pointers for Connections/Universes/Crystal Reports in LCM.
I know we need to move crystal reports and publish them again in QAS/PRD but this way we need to assign security for folders. I want to avoid these efforts by doing one time configuration in DEV and moving it to QAS/PRD through LCM. This is more consistent with current SAP Netweaver transport strategy.
Regards,
Prasad

SAP Query Use and Transport Strategy

Anyone wish to share their experience in the use of SAP Query? We generally have an understanding that we don't want to be giving out this tool to end-users in Production. We would like to create queries, and when we wish to give them out we'll attach t-codes to them and roll them out.
However in practice, this is becoming difficult. An example is where in our gold client we create queries and then we would typically transport to our unit test client. But whenever we do an export, it generates a transport request. Before we are done testing we may end up with 10's of transports for a single query?
Anyone have some ideas on a transport strategy for SAP Query? How about it's use in Production? Our landscape for changes are typically DEV Gold -> DEV Test -> QAS -> PRD. We would ideally like our transport strategy for queries to match what we do for everything else.

HI,
Query objects are transported in different ways according to the query area in which they were created.
In order to know which transport options are available, you must first understand how query objects are created.
Standard Area
Query objects are stored in the client-specific table AQLDB. They are not connected to the Change and Transport Organizer.
Global Area
Query objects are stored in the cross-client table AQGDB. They are connected to the Change and Transport Organizer.
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb467f455611d189710000e8322d00/content.htm
Global area objects can be transported into other systems. Standard area query objects can not only be transported to other clients within their own system, but into all clients of other systems as well. In addition, query objects can be transported from the global query area to the standard query area and back within the same system.Transports are normally performed by the system administrator, not by end-users. For this reason, you need the appropriate authorizations
Check the below links for detailed explanation
Transporting Global Area Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ec/052786a30411d1950a0000e82de14a/content.htm
Transporting Standard Area Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ec/052789a30411d1950a0000e82de14a/content.htm
General Transport Description
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb4699455611d189710000e8322d00/content.htm
Generating Transporting Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46a6455611d189710000e8322d00/content.htm
Reading Transport Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46e7455611d189710000e8322d00/content.htm
Managing Transport Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46f4455611d189710000e8322d00/content.htm
Transporting Objects between Query Areas
http://help.sap.com/saphelp_47x200/helpdata/en/ec/05278ca30411d1950a0000e82de14a/content.htm
I hope this solves your purpose.
Regards,
Vara
Message was edited by:
varaprasad bhagavatula

Transport strategy of BI-BO Objects

How to transport the BI-BO objects across the landscapes? I mean WEBI, DEKI, XCELCIUS, Crystal and all other BO reports
created on BI Queries/Infoproviders.
Can we have BO reports saved along with our regular BEX Queries in BEX folders?
Can we publish BO reports in BI portal?
Plz help in understanding the transport strategy of BI-BO objects!!

If you're using XIR2 you have only one option - Import Wizard tool. If you are on Xi3.1 you have 2 options Import Wizard or LCM (Life Cycle Manager).
Documentation for both available at http://help.sap.com/businessobjects.
Can we have BO reports saved along with our regular BEX Queries in BEX folders?
No
Can we publish BO reports in BI portal?
Yes, if you're using CR reports.

Transport strategy for your transport landscape is inconsistent

Hello everybody,
we had 4 system landscape.
DEV>QAS>TST-->PRD.
we move the request from DDEV >QAS>TST and then forward request from TST to PRD system.
Now, we have delete the system TST from TMS, after deletion it give the warning.
Transport strategy for your transport landscape is inconsistent.
Message No. XT481
Please suggest, what is meaning of this warning and how to correct.
Thanks
Ganesh

You need to do following
1. Logon to domain controller client 000 -->STMS --> Overview System --> Select TST --> SAP System --> Delete
2. Reconfigure STMS DEV>QAS>PRD
3.STMS --> Overview Transport Routes --> Configuration --> Distribute and Activate (To All System)
Note : You should do this from Domain Controller client 000
I assumed you know Step 2. If you dont please let me know i can guide you on that as well
Cheers !
Manish

Single Web Dispatcher for Multiple SAP Systems

Having read a number of posts & S-Notes, I found that Web Dispatcher 7.2 is capable of routing between multiple SAP instances.
But despite having troubleshooted, I am unable to make it work. I have two separate installations ERP & Portal on the same host, but my web dispatcher only routes to one of them at the same time. Simultaneous access to these 2 systems is not possible either with URL or Port control procedure mentioned at url http://help.sap.com/saphelp_nw72/helpdata/en/c5/ec466f5544409982c7d3ca29ce1ad3/frameset.htm
Can anyone point an error in my below mentioned configuration of web dispatcher file.
I want requests on port 8853 of my web-dispatcher to be routed to system DEV &
the requests on port 8843 of my web-dispatcher to be routed to system DEP
rdisp/mshost = sapdeverp
ms/http_port = 8100
icm/server_port_0 = PROT=HTTP,PORT=8853
icm/server_port_1 = PROT=HTTP,PORT=8843
wdisp/system_0 = SID=DEV, MSHOST=sapdeverp, MSPORT=8100, SRCSRV=*:8853
wdisp/system_1 = SID=DEP, MSHOST=sapdeverp, MSPORT=8102, SRCSRV=*:8843
Can we mention multiple message servers instead of single message server "rdisp/mshost = sapdeverp
ms/http_port = 8100" ?
Any suggestions ?

Very right in mentioning this point coz myself have been confused over it but if I remove these lines & execute the -checkconfig:
then it states as below:
Checking SAP Web Dispatcher Configuration
=========================================
maximum number of sockets supported on this host: 8192
Server info will be retrieved from host: : with protocol: http
Checking connection to message server...
ERROR: Connection to message server failed: NIESERV_UNKNOWN
Check ended with 1 errors, 0 warnings
More over accessing the servers give the following error:"
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Mon Nov 29 17:28:11 2010
Module: http_route.c
Line: 3139
Server: solomon__03
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
I have tried this actually, even tried the option ms/server_port_0 & 1 to replace ms/http_port but it didnt work either.
Any more ideas.. ?

ChaRM: usage of ChaRM and none-Charm transport strategy

Hi ChaRM-TMS Gurus!
We have the following [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html] and would like to use ChaRM approach simultaneously.
What are the minimal requirements concerning transport layers/routes, which settings should be changed?
How much and which transport layer/routes does ChaRM need?
a) 1 any new transport layer/route
b) standard transport layer, transport layer "SAP" and others
Should all the standard transport layer/routes from virtual systems to real QAS and PRD systems or can I start as follows:
1) Leave the current TMS settings unchanged
2) Activate the extended transport control
Result: the current setting will be client specific and all the old transport requests will be moved to client specific transport routes
3) change the transport strategy (from mass transport to single transport)
3) Define new transport layer
4) Define new transport route for SAP objects from DEV to QAS
and assign the transport layer from 3) (client specific)
5) Define new transport route ZXXX from DEV to QAS
and assign the transport layer from 3) (client specific)
6) Define the delivery transport route from QAS to PRD (client specific)
7) activate and distribute the settings
Thank you very much indeed!
Thom

Hi Martin,
Solmaniacs' assumptions are correct. You can have as many source clients as you want.
As long as
- STMS configuration (transport routes, and domain links) are consistent
- SMSY configuration (logical components are declared properly with assigning the right role types to systems/clients)
- Project declaration are done correctly (so that from Solman solar_project_admin you can read the STMS as confiured in the distant STMS domain)
- IMPORTANT: those configuration GO ALONG with each other !! (SMSY should nt contradict STMS for example...)
The tasklist that is generated for each Solman project will be as follow
- Node 1: Header Tasks (commun to all systems)
- Node x: Corresponding to track x declared in Project (each Source System will have his own node with the corresponding track under)
- Node x+1
- Node ...
- Last Node : Tasks for Tasklist closure - checks on scma consistancy and CTS projects closure
So you'll always have n+2 nodes in your tasklist; n beeing the number of declared source (=dev) systems in project
For each action launched from change docuemnts like creation of TR, release of TR or Retrofit (as Solmaniac said) you'll have an additional pop-up that will appears letting you choose the system you want to use for the action
Hope its helpful
Regards
Khalil

Re: Workflow controlled Transport Strategy

Hi friends,
we are using workflow controlled transport strategy in our landscape. So far we are using existing help help.sap.com to configure the same. But we found that it is not enough for completing configuration in perspective of out client requirement. Can anybody help to get the more help on this?
Any help would be highly appreciated.
thanks,
krishna

SAP Note : 313991
Due to the approval of a request in the QAS system, this becomes
active in the import queue of system VDE (status: Request is ready
for import). Refused requests receive the following status:
Request was refused.
o The RSTMS_DIST_APPROVED_REQUESTS program is used to transfer the
requests with the status "Request is ready for import" from the VDE
import queue to the supply system of VDE (that is, the PRD
production system or, if necessary, several production systems and
clients) and then to delete them from the import queue of VDE.
Refused requests (status: Request was refused) are also deleted
from the VDE queue.
You can choose between the following options:
- Transfer all approved requests:
All approved requests from the VDE queue which are before the
end are transfermark (stop mark) red. All requests that have
not yet been processed with the QA procedure remain in the VDE
queue until a decision (approval or refusal) has been made.
cheers
dEE

Transport strategy for BPC

Hi all,
Is there a transport strategy for BPC. How do we move changes made in the development to the testing to the production environment? How do we transport the changes? Is it done manually or does BPC have a feature that automatically transport the changes? Does BPC keep automatically track of the changes?
Thanks.

I think this OP's message was posted in the wrong forum. In any case, there's a whitepaper on the transports for BPC 7.0NW.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b048ecf4-9414-2c10-ceac-fb2492a8016c
Hope this helps.
-Ken

Regarding Adding multiple SAP Scripts in one Transaction

Hi All,
I have a requirement where i will have to develop one custom transaction which will have multiple SAP Script Forms to it.
The scenario is as below:
First i will have to create a Program with Selection-Screen with 10 Radio buttons in one Block - Here Each Radio Button indicated Diffrent FORM[SAP SCRIPT].
Down to it i will create another Block with some selection-screen fields. Like Order Type, Order No, Customer PO number, SOLD TO, BILL TO, SHIP TO etc.
And based on Radio button selected allowed order types will vary!
So after selecting one Form[Radio button] and enetring other selection fields once i press execute button.
i need to display list of Orders in ALV List output with check boxes for each record in the List Output.
Here all the radio button Forms are related to Sales Order document and Delivery document
So do we need to create new ALV List Report (or) We can use submit VF31 transaction's program [sd70av3a].
After we are displayed with orders in the output.
Then we should provide a functionality as such if user selects mutiple Orders/Check boxes he should be able to view multiple Orders one after other, and simultaneously generate PDF Files for Each Order Selected and attach them in Mail send them to Block of users.
Can anybody give there sujjestions.
Without generating spool request no's is it possible to generate PDF files for SAP SCript output!
Is it possible to Generate & attach one/multiple PDF files to mail ID and send them to list of users!
Can anybody give inputs.
Thanks in advance.
Thanks & Regards,
Prasad.

hi prasad,
There is one concept called Print Work Bench(PWB) to print the multiple scripts or smartforms which r assigned to a same transaction.
If u need the info related to PWB shoot me a test mail to [email protected]
i will send u the same
fot the same u can check the below link also
http://help.sap.com/saphelp_nw04/helpdata/en/64/bf2f12ed1711d4b655006094192fe3/content.htm
Prasad i didn't get the mail from you plz check it once again
If u find it useful plz mark the points
Regards,
Naveen
Message was edited by: NAVEENKUMAR GUDURI

Set sap Component mandatory while creating the support desk message

Hi,
When create the support desk message from any application sysytem, the sap component get selected automatically but when we create the suppport desk message from the Easy Access the component wiil be blank, so some user create the support message without giving the component. So we want to make the component as mandatory while createing the support desk message from application system and also set mandatory when we create support message in solman.can anybody help me in setting component mandatory.
Regards
charan

Dear Charan,
The logic of setting the SAP Component mandatory is explained in the note 640532.
Kindly use the note to resolve the purpose.
Hope this solution helps.
Regards
Amit

Can we Set the Default SAP Component while Creating Support Message

Hi Friends,
I Have got requirement like, when we create the support desk message from any application system by default the sap component should get selected which we have determined in Solman.Our Business secnario is too complex user give create the support message without giving the Sap Component or they give wrong sap Component, so we want to set the sap component get selected by default while creating the support desk message, guide me in solving this issue.
Regards
Charan

I think your logic is reversed. I think it's better to let users create messages from the application areas from which they are having the problem. Based on the standard SAP component which defaults into the component field, the ticket can be routed to one of your 20 teams. This is where the agent detemination rule for support team can be configured. There are a number of message on the forum regarding support team configuration. This way, if your 20 teams can't solve the problem (for example SAP defect) then the message can be forwarded directly to SAP using the correct component. Good luck.

Error while updatig SAP Component Repository in SLD

We are getting the following error while updatig SAP Component
Repository in SLD:
"The import history of the target namespace could not be determined".
We are in the middle of updating SAP CR in SLD from version 2.0 to
version 3.0.
Before updating CR this morning, our 'model version' was 1.4.31 and
CR Content Version (sld/active):No versioned CR imports detected was
defined.
I imported the Model version 1.5.20 using 'cimsap1418_0-10003379.zip'
and while importing the delta 'CRDELTA1418_0-10003379.zip', we are
getting the above mentioned error.
Pls help us to resolve this problem as we took the shutdown time from
business to update the CR in XPD server.
Thanks
Amar

To upgrade from SAP MASTER DATA FOR SLD 2.0 to SAP CR CONTENT UP TO 2007 (technical version is 3.0), you are required to perform the following steps:
1. Import the last delta from 2.0. This comprises model 1.5.20 (cimsap1418_...zip) and the content delta (CRDelta1418_...zip). Before you import the new model, check the parameter RejectUnsupportedCIMQualifiers and the existing model version. Proceed according to Note 907897.
In 6.40 and 7. 0 Support Package 0 - Support Package 9, the import of the model (file cimsap....zip) takes 30-60 minutes. As of Release 7.0 Support Package 10, the import requires less than 1 minute.
2. You can obtain the next update from SAP CR CONTENT UP TO 2007 (3.0).
> as per note 669669

Multiple SAP systems in MSCS

Hello,
We would like to install an ECC 6.0 and a CE in a cluster MSCS of two nodes.
I've found the SAP documentation "Installation of Multiple SAP Systems in MSCS: Oracle" but the doc version is 03/30/2007. Could you please tell me wether there is a new version of this document? or where can I find more documentation about this?
Is it recommended to create a domain between the cluster nodes? We're going to have 3 MSCS clusters with two systems in each cluster, should I create a domain for the three clusters, one domain per cluster or no domain at all?
Thanks and regards,
Ana.
Edited by: systems2111 on Feb 3, 2010 9:46 AM

Hello Shailesh,
The scenario is the following:
- MSCS between ECC and CE.
- MSCS between Solution Manager and nothing.
- MSCS between Websphere and SAP Business Objects
Every MSCS has two machines. for example, ECC will run on one machine, CE oon the other machine and in case of problems the cluster will run the ECC in the CE node.
I don't know if I have explain myself, but, anycase, please ask me with your doubts.
Regards,
Ana.

Multiple SAP component transport strategy

Similar Messages

Maybe you are looking for