Multiple SAP SIDs on single Physical machine. Windows with Oracle
Hi
I need bit information regarding this issue,
I am installing 3 SIDs on single machine
1. ECC 6.0 EHP4
2. Netweaver PI.
3. Netweaver MI.
Operating System : Wiindows 2008 Server.
Database: Oracleg 10.2.0.4 .
All done successfuly however i am not able to start all three servers at the same time, only one can be up at a single time.
As per you recomendation
1. I have 3 diffrent SIDs and unique instance number.
2. However only single Listner there on my machine.
2. Oracle Home is also a single.
Can you please advise what could be the exact Couse of my issue.
Regards
Gagan
Hello Gagan,
See note 562403:
13. Do I require a dedicated listener for each database instance?
If you operate several database instances on a single node, only one
listener is required, even if the individual instances have
different Oracle releases. You must simply make sure that you use
the listener for the highest Oracle version that was installed
(downward compatibility). You can then enter all existing instances
in the relevant listener.ora. See the example for listener.ora in
Note 98252.
If you nevertheless decide to use several listeners in specific
cases, refer to the procedure described in Note 153835.
You should create an Oracle_Home for each SID database.
Regards,
Rafa
Similar Messages
-
Multiple SAP system on single physical server.
Hello Experts.
We are in process of implementaing SAP solution withLandscpe having systems ECC 6.0, SolMan 4.0, BI. We are planning to have 3 Sytem landscape for all.
Now but currently we are having only one Physical server
Is it possible to Install 6 SAP system on single server?(DEV and QAS for ECC, Solman, BI respectively). The server is having sufficient hardware for 6 system as per sap standered. Planne OS is RHEL and DB MaxDB. Initially we are having 16 GB RAM extendable.
Will SAP support such kind of landscape?Hi Nikhil
Just my two cents:
Never put non-prod/prod systems on the same server, how would you test os patches, what if system wide components cause problems, what if - for example - you want to upgrade your database on the dev system, but you need a new library, which is not compatible to the version needed by the prod system.
Your single linux box will not be big enough to hold all these systems, trust me. And x86_64 hw is sooo cheap ))
Regards, Michael -
Multiple report fields from single physical column.
Hi Experts,
I have a physical table like below. Multiple records for a single customer id. The no of Address_type may increase in future.
Customer_id Address_Type Address
101 Primary abcdefgh
101 Secondary 234oij3mb4
101 Billing mdmnweoij4
102................etc.
My Requirement on OBIEE is to display report as below.
Customer_ID, Primary_Address, Secondary_Address, Billing_Address.
101 abcdefgh 234oij3mb4 mdmnweoij4
Multiple report fields ( Primary_Address, Secondary_Address, Billing_Address ) are derived from same physical column ADDRESS.
I tried to duplicate the Address column on the report thrice and added conditions like Address_Type = Primary/Secondary/Billing for those three fields respectively.
But only of the field is getting correct data and rest of duplicate columns are null.
Tried FILTER function on OBI Answers, but the function fails saying it should be used only on measures.
Thought the alternative would be to define multiple logical columns at BMM layer. Created multiple alias for same table at physical layer and correspondingly created LTS for each on a single logical table. Defined Fragmentation/Where conditions.
LTS1 - Address_Type = PRIMARY
LTS2 - Address_Type - SECONDARY
LTS3 - Address_Type - BILLING
Created multiple logical columns from each LTS like Primary_Address, Secondary_Address, Billing_Address from LTS1, LTS2, LTS3 respectively.
This time, am getting data for all the fields on the report but getting cartesian result.
Can someone guide me whether my approach is correct or any other alternate best approach to achieve the desired result.
Note: I have the data Address on multiple physical rows for a customer, rather Not in a single row. which is causing me problem.
Thanks...
Ramchand.Hi Srini VEERAVALLI,
I have lot many other fields in the same report coming from other tables.
Does the Pivot table option for above mentioned Address fields affect other columns?
If Yes, Can there be any other alternative? Am thinking of Opaque View at Physical layer to bring all Addresses on a single row.
Thanks...
Ramchand. -
Multiple SAP instance on single server.
Hello Experts.
We are in process of implementaing SAP solution withLandscpe having systems ECC 6.0, SolMan 4.0, BI. We are planning to have 3 Sytem landscape for all.
Now but currently we are having only one Physical server
Is it possible to Install 6 SAP system on single server?(DEV and QAS for ECC, Solman, BI respectively). The server is having sufficient hardware for 6 system as per sap standered. Planne OS is RHEL and DB MaxDB. Initially we are having 16 GB RAM extendable.
Will SAP support such kind of landscape?Hello,
We did not put 6 systems on the same server but we are running fine with 4 systems (R/3, XI, BI) on one server (8 itanium, 32 GB ram).
16 GB seems very small for 6 systems...
Don't forget that beside the obvioous economy, they are also big cons with mutualization.
When the server crashes because of a hardware failure, all of your landscape is out and the phone rings a lot.
When you need a reboot for one system, you have to stop all the others...
Good luck !
Regards,
Olivier -
Installation of CRM 2007 in Windows with oracle and cluster environment
Dear Experts,
We are about to start the installation of CRM 2007 (ABAP+JAVA) with
Oracle 10g on Windows x64 in cluster environment. In the SAPINST dialog
box under High availability option, I could see installation options like ASCS
Instance, SCS Instance, First MSCS node, Database Instance, Additional
MSCS Node, Enqueue Replication Server, Central Instance and Dialog
Instance.
I have gone through the installation guide. I have below queries
regarding the same. Can you please clarify the same
1) Our requirement is we want to have an ACTIVE-ACTIVE cluster setup
with sap service running in Node A and Database running in Node B. Can
we have this setup in ABAP+JAVA setup
2) Also,in the SAPINST dialog box as said above except last two
(Central and Dialoge instance) as per standard installation guide are
to be installed in shared drives as per the requirement. But, central
and dialog are said to be installed locally on any one node in MSCS or
in separate server. As per my understanding Dialog instance will be
used for load balancing which we do not require now. Hence I feel this
is optional in our case. Where as Central Instance I am not able to
understand why this option is for? Is it mandatory to be installed or optional. If
so, when I installed it in one of the MSCS node the incase of failover
how does it effect the system. As per my understanding ASCS and SCS
comprise central instance.
Please clarify and thanks in advance.
Regards,
Sharath Babu M
+91-9003072891I am following as per the standard installation guide.
Regards
Sharath -
Installing SAP PI 7.0 SR on Linux with Oracle
Hi all,
We have a requirement where in we have to install SAP PI 7.0 SR2 on LINUX OS with ORACLE as database.
Please help me in providing the below details
1. Hardware Requirements
2. Software Requirements. Please be specific in mentioning the versions of the software.
Do we have any other important points to be kept in mind for starting the installation.
If any one has the same installation previously, please direct me to some blogs which can help me.
Thanks for your help.
Younus
Helpful answers would surely be rewarded.Hi,
PI Installation Requirements
XI installation
Regards
Seshagiri -
Secure LDAP with Multiple DPS's on Single Physical Server
I am having an issue connecting to the directory server over SSL via the directory proxy server. I have enabled SSL and tested successfully in some situations, however this situation is unique.
DPS 5.2 patch 4
Directory Server patch 4
I have applied the neccessary hotfixes from sun to resolve the SSL issues.
There are 3 physical servers. 2 of those servers each have 2 instances of directory proxy server running. The 3rd server has 2 separate Directory Server instances running (1 for enterprise authentication, 1 for Access Manager). Each physical proxy server has 1 instance running for each Directory server instance (1 enterprise LDAP, 1 AM LDAP). All 4 proxy instances can connect successfully to the Directory Masters over the unsecure ports (389 for enterprise LDAP, 55389 for AM LDAP). On the proxy servers, only the initial proxy instance can connect to the secure port successfully. For instance, on server 1 first the DPS for enterprise LDAP was installed then a DPS for AM LDAP was added. Only the enterprise proxy instance can connect successfully over SSL. On server 2 initially the AM LDAP instance was installed and then an enterprise LDAP instance was added. In this case only the AM LDAP instance can connect successfully.
For both instances of the proxy the appropriate certificates have been installed and verified. I can use the dps-instance-cert8.db for the working and non working DPS instances and successfully connect to the Directory Master using ldapsearch from the directory proxy server.
When I do ldapsearch I receive the following error on the second instances:
ldap_simple_bind: Can't contact LDAP server
SSL error -12271 (SSL peer cannot verify your certificate.)
Certificates:
bash-2.05$ /jes/ds52/shared/bin/certutil -L -d /jes/ds52/alias -P dps-instance1-
LDAP Development Pu,u,u
CMS SUN CERTIFICATE AUTH 2023 CT,,
bash-2.05$ /jes/ds52/shared/bin/certutil -L -d /jes/ds52/alias -P dps-instance2-
LDAP Development Pu,u,u
CMS SUN CERTIFICATE AUTH 2023 CT,,
Each use the same server cert, the host is �*.test.com�, using the asterisk so the hostname shouldn�t matter.
DPS INSTANCE 1 � Success
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385609] TCP_NODELAY was set on socket 3
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 310200] Success with enabling socket 16 for blocking
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 323705] ( xxx.xx.xxx.xx+ 636) syncConnection success.
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385609] TCP_NODELAY was set on socket 16
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [TRACE] [ 520503] Connection established to condo101.cms.hhs.gov
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300771] Promoting socket 16 via socket 1.
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300751] Socket 16, success with SSL_HANDSHAKE_AS_CLIENT
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385701] Success with sessionPromote to SSL for socket 16.
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385704] Success with setting SSL_AuthCertificateHook callback
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385705] Success with setting SSL_BadCertHook callback
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385706] Success with setting SSL_HandshakeCallBack
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 302019] Success with SSL_SetPKCS11PinArg (socket 16)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385748] SSL_SetURL skipped on socket 16 (null url)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385803] Success with SSL_ResetHandshake as client (socket 16)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385739] Certificate possesses valid times on socket 16
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385745] For socket 16, pinArg does possess a value.
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 302024] Success with CERT_VerifyCertNow (checking signature, usage: "certUsageSSLServer").
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385725] Certificate accepted on socket 16
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300754] Success with handshake on socket 16
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385746] SSL_ForceHandshake success on socket 16
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [TRACE] [ 171210] [client( xxx.xxx.xxx.xxx, 3)] [server( xxx.xx.xxx.xx+ 636, 16)] Connection via SSL session
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [STAT/CONN] [ 171211] [client( xxx.xxx.xxx.xxx, 3)] Accepting connection via network-group-1
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 310200] Success with enabling socket 3 for blocking
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300771] Promoting socket 3 via socket 0.
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300750] Socket 3, success with SSL_HANDSHAKE_AS_SERVER
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385701] Success with sessionPromote to SSL for socket 3.
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385704] Success with setting SSL_AuthCertificateHook callback
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385705] Success with setting SSL_BadCertHook callback
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385706] Success with setting SSL_HandshakeCallBack
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300801] Success with setting SSL_REQUEST_CERTIFICATE (1)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300802] Success with setting SSL_REQUIRE_CERTIFICATE (0)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300405] Success with SSL configuration on socket 3
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385803] Success with SSL_ResetHandshake as server (socket 3)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300406] Success with SSL promotion on socket 3
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [TRACE] [ 390307] [client( xxx.xxx.xxx.xxx, 3)] [server( xxx.xx.xxx.xx+ 636, 16)] Success with OnSSLEstablished rule... continuing
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 300754] Success with handshake on socket 3
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385713] Read on socket 3. Received 42 byte(s)
May 10 2007 09:44:18 server123 SunONEDPS[ 24710]: [DETAIL_TRACE] [ 385716] ber_get_next (socket 3) returned complete PDU
DPS INSTANCE 2 � FAILING
ldapsearch -h server123 -p 55636 -P /<serverroot>/alias/dps-server123-cert8.db -D "cn=directory manager" -s base -w adminjes -b dc=cms,dc=hhs,dc=gov objectclass=*
ldap_simple_bind: Can't contact LDAP server
SSL error -12271 (SSL peer cannot verify your certificate.)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 300901] Successful match of xxx.xxx.xxx.xxx+36383 against ALL
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 110999] In permit_connection_from_ip(), The counter for IP:xxx.xxx.xxx.xxx is now 2 and the limit is 0
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385609] TCP_NODELAY was set on socket 15
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 310200] Success with enabling socket 16 for blocking
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 323705] ( xxx.xx.xxx.xx+55636) syncConnection success.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385609] TCP_NODELAY was set on socket 16
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 520503] Connection established to condo101.cms.hhs.gov
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300771] Promoting socket 16 via socket 1.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300751] Socket 16, success with SSL_HANDSHAKE_AS_CLIENT
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385701] Success with sessionPromote to SSL for socket 16.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385704] Success with setting SSL_AuthCertificateHook callback
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385705] Success with setting SSL_BadCertHook callback
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385706] Success with setting SSL_HandshakeCallBack
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 302019] Success with SSL_SetPKCS11PinArg (socket 16)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385748] SSL_SetURL skipped on socket 16 (null url)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385803] Success with SSL_ResetHandshake as client (socket 16)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385739] Certificate possesses valid times on socket 16
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385745] For socket 16, pinArg does possess a value.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 302024] Success with CERT_VerifyCertNow (checking signature, usage: "certUsageSSLServer").
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385725] Certificate accepted on socket 16
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300754] Success with handshake on socket 16
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385746] SSL_ForceHandshake success on socket 16
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 171210] [client( xxx.xxx.xxx.xxx, 15)] [server( xxx.xx.xxx.xx+55636, 16)] Connection via SSL session
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 310200] Success with enabling socket 15 for blocking
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300771] Promoting socket 15 via socket 0.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300750] Socket 15, success with SSL_HANDSHAKE_AS_SERVER
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385701] Success with sessionPromote to SSL for socket 15.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385704] Success with setting SSL_AuthCertificateHook callback
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385705] Success with setting SSL_BadCertHook callback
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385706] Success with setting SSL_HandshakeCallBack
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300801] Success with setting SSL_REQUEST_CERTIFICATE (1)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300802] Success with setting SSL_REQUIRE_CERTIFICATE (1)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300405] Success with SSL configuration on socket 15
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385803] Success with SSL_ResetHandshake as server (socket 15)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 300406] Success with SSL promotion on socket 15
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 390307] [client( xxx.xxx.xxx.xxx, 15)] [server( xxx.xx.xxx.xx+55636, 16)] Success with OnSSLEstablished rule... continuing
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [NOTICE] [ 385721] Read on socket 15 failed.
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [NOTICE] [ 385721] SSL_ERROR_BASE + 3, NSPR error: -12285 (0xffffd003). Native errno is: 11
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385714] ber_get_next (socket 15) returned LBER_DEFAULT
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 385714] SSL_ERROR_BASE + 3, NSPR error: -12285 (0xffffd003). Native errno is: 11
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [EXCEPTION] [ 301006] Unexpected error on socket 15. (Error: -12285).
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 190401] [server( xxx.xx.xxx.xx+55636, 16)] Input was not a BER encoding or connection closed: source( xxx.xxx.xxx.xxx, 15)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 190401] [server( xxx.xx.xxx.xx+55636, 16)] SSL_ERROR_BASE + 3, NSPR error: -12285 (0xffffd003). Native errno is: 11
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 171505] [server( xxx.xx.xxx.xx+55636, 16)] Entering recycle_inner_connection
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 301201] Closing connection to: xxx.xx.xxx.xx+55636 (socket 16)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [DETAIL_TRACE] [ 301201] Closing connection to: xxx.xxx.xxx.xxx (socket 15)
May 10 2007 10:05:17 server123 SunONEDPS[ 26275]: [TRACE] [ 110998] In done_connection_from_ip(), The counter for IP:xxx.xxx.xxx.xxx is now 1 and the limit is 0In these situations it's important to separate SSL level issues from LDAP issues. I've had good results using "openssl s_client" to investigate and debug SSL/TLS level issues. I point it at the LDAP server and it sets up a connection handling the SSL layers and giving lots of diagnostics about SSL and the X.509 certificates in use.
Try looking for things like whether the SubjectAltName and/or Issuer's CN contain the same hostname you are using to connect.
After giving you the diagnostics it will be waiting with your stdin/stdout connected to the application via SSL (which could make you think it's hanging). Since you're probably not going to be typing the LDAP protocol by hand you want to abort s_client at this point (or type something that Directory Server will reject as a LDAP protocol error).
You can get openssl from the usual places: blastwave.org & sunfreeware.com.
Hopefuly this will help,
-Scott- -
Error while Installing R/3 4.7 on windows with Oracle
Hello All,
I am getting this error while installing R/3 4.7 on windows
FSL-02097 The file system mounted on: C:\ does not support ACLs.
ERROR 2009-06-02 17:30:06
FSL-03006 Unknown exception caught when trying to add an entry to the service file.
ERROR 2009-06-02 17:30:06
MUT-02011 Internal error: A call to syslib failed. System error message: No error.
ERROR 2009-06-02 17:30:06
MUT-02011 Internal error: A call to syslib failed. System error message: No error
Please help me out
RohitThanks for your inputs
I was able to continue the installation after that.During database Instance installation I get the following error:
CJS-00095 Error return code.<br>DIAGNOSIS: Return code 35 of executable D:\oracle\ora92\bin\oradim indicates an error
The log files oradim.log says
"DIM-00035: You have entered and invalid option for the -EDIT command"
and sapinst_dev says:
" NFO 2009-06-04 14:42:50
CJSlibModule::writeInfo_impl()
Output of D:\oracle\ora92/bin/oradim -NEW -SID IDS -STARTMODE manual -SRVCSTART system is written to the logfile oradim.log.
WARNING 2009-06-04 14:42:50
CJSlibModule::writeWarning_impl()
Execution of the command "D:\oracle\ora92/bin/oradim -NEW -SID IDS -STARTMODE manual -SRVCSTART system" finished with return code 35. Output:
DIM-00035: You have entered and invalid option for the -EDIT command
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
oradim -NEW -SID IDS -STARTMODE manual -SRVCSTART system returns 35
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
oradim: Return codes indicating success are: [0]
ERROR 2009-06-04 14:42:50
CJSlibModule::writeError_impl()
CJS-00095 Error return code.<br>DIAGNOSIS: Return code 35 of executable D:\oracle\ora92/bin/oradim indicates an error.<br>SOLUTION: See log file oradim.log for details.
TRACE [iaxxejsbas.hpp:270]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESAPinstJSError: ind-rel.ind-os.ora.badReturnCode
TRACE [iaxxcwalker.cpp:301]
CDomWalker::processStep()
<html><head></head><body><p>An error occurred while processing service <b>SAP R3E 4.7 Extension Set 2 SR1> ABAP System> Oracle> Non-Unicode> Database Instance Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul><p>Log files are written to <b>C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB</b>.</p></body></html>
Please help
Rohit -
Oracle Single Sign on Integration with Oracle EBS r12
Hello,
I am working on a project to integrate Oracle Single Sign On on Oracle r12. There is plenty of information available on Oracle Support but few inter-mixing and confusing terminology keeps popping up and I do not understand how all pieces together work. I am new to Oracle Single Sign On.
Here are few basic questions.
1. What is the difference between Oracle Internet Directory, Oracle Virtual Directory and Oracle Active Directory
2. Are the terms Identity Management and Oracle Single Sign On interchangeable? What is the difference between two?
3. What is Oracle Access manager and how different that is from Identity Management?
4. What is Oracle HTTP Server 11g webgate and how different that is from a normal traditional Oracle HTTP Server?
5. What is Oracle EBS Accessgate? Why do I need it? On metalink some notes do not indicate use of Accessgate at all for OSSO deployment while some makes it look like required.And advise on above will help.
Thank you
DarshHi Darsh,
1. Oracle Internet Directory (OID) is Oracle LDAP storage solution (more here), Oracle Virtual Directory is Oracle solution that can read identity data (and filter it (mask it) based on policies) from Oracle/non-Oracle databases, Oracle/non-Oracle Directories and files and provide the user profiles as LDAP view (more here), There is nothing called Oracle Active Directory, you must be referring to Microsoft Active Directory.
2. No, Oracle Single Sign On (OSSO) is a feature in iAS (its obsolete), Identity Management is wide umbrella of solutions and concepts.
3. Oracle Access Manager is one component of Oracle Identity and Access Management suite of products.
4. Webgate is Oracle access Manager agent that is installed on a webtier, it intercepts the web requests and collect the credentails, send them to Oracle Access Manager for security evaluation (decide what Authentication is needed, verify collect credentials, etc), webgate then enforce the Access Manager decision.
5. Oracle EBS AccessGate is a java application that has the same use of OAM Webgate (it is OAM agent) but specific to E Business suite, EBS Access Gate is the new solution replacing OSSO agents, OAM is replacing OSSO server component, EBS and OSSO customers can use OAM server with OSSO agents, or with EBS AccessGate.
HTH.
Ghassan -
How To Install Platform for Multiple Developers on Single UNIX Machine?
Hello,
What is the best way to install the WL 8.1 Platform for multiple
developers on a single UNIX machine? These developers may start
concurrent instances.
The problems I see are that the log files generated by Workshop would
be shared among concurrent users, permissions would need to be set so
that the user that is running the instance that creates the log files
will need to create the file with permissions that everyone can use. Are
there any other issues to doing this?
I could not find the information on this in the documentation.
ThanksI was referring in particular to the logs that are created by Workshop
itself (in the workshop directory). It creates workshop.log and netui.log.
Raj Alagumalai wrote:
Steven,
which workshop log file are you referring to ?
the workshop log files are usually saved to the domain directory.
If the developers are each going to start their own server instances then
there should be no issues.
The best option for you is to create multiple domains for each developer.
They will share the same workshop installation, but they will each have
their own instances.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Steven Ostrowski" <[email protected]> wrote in message
news:[email protected]..
Hello,
What is the best way to install the WL 8.1 Platform for multiple
developers on a single UNIX machine? These developers may start
concurrent instances.
The problems I see are that the log files generated by Workshop would
be shared among concurrent users, permissions would need to be set so
that the user that is running the instance that creates the log files
will need to create the file with permissions that everyone can use. Are
there any other issues to doing this?
I could not find the information on this in the documentation.
Thanks -
Installing data quality management for sap for multiple sap system
Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya -
Hi Everyone,
We are running Oracle EBS on Physical machine having specs as follows:
DB
X2 Quad Core Xeon 2.4 GHz
32 GB RAM
x2 146GB SAS Drive with RAID-1 for OS
SAN HDD x10 450GB SAS 15K i.e. 4.0TB but RAID-5 implemented (2.3TB allotted to DB)
x4 NIC but 1 NIC used 10/100/1000
Apps
X2 Quad Core Xeon 2.4 GHz
32 GB RAM
x2 146GB SAS Drive with RAID-1 for OS
SAN HDD x10 450GB SAS 15K i.e. 4.0TB but RAID-5 implemented (500GB allotted to Apps)
x4 NIC but 1 NIC used 10/100/1000
We are facing serious issues when migrated Oracle EBS on vmware infrastructure.
Issue are related to high I/Os and high CPU usage hence performance of the application gets down badly whereas same application on physical machine working fine. We would also like to share physical machine is with lesser specification.
Following are specs of Oracle & VM Ware machine;
Oracle EBS is with 11g v1.1.07 Database and R12 v12.1.3 Apps
OS for above applications is RED HAT Enterprise Linux 5.5 64bit
ESXi version 5.5.0 build 1331820
Hope to have a positive reply.Hi Linjo,
Thank you for your response.
VM MAchine specs are as follows:
(There are two servers, everything is same except local storage.)
Both servers are HP DL 585 G7 server with;
Quad AMD Opteron Processor 2.5GHz
12GB RAM
x8 NIC
Local-1 HDD x8 600GB SAS 10K i.e. 5.4TB, RAID-5 implemented
Local-2 HDD x10 900GB SAS 10K i.e. 7.2TB, RAID-5 implemented
SAN
SAN-1 HDD x6 600GB SAS 15K i.e. 2.4TB but RAID-5 implemented
SAN-2 HDD x6 2TB SAS 7.2K i.e. 8TB but RAID-5 implemented
Yes, it is a shared environment, like we have other machines are running on VM but we have dedicated cores & memory for EBS Apps & DB servers. -
How can I exit out of the Time Machine window when it has frozen?
So I restored a backup from the 16th of June today from Time Machine. Just now I accessed 'Documents' folder from the 21st June backup and restored the file as I have made changes to Documents since the 16 th of June. Then I went back into 'Time Machine' to look for more files to restore.....and it has frozen on the Time Machine window with all the stars around the finder. How do I get out of time machine now? (Apart from shutting it down).
If it is frozen, there is no option (other than shutting it down) that I am aware of.
Barry -
System copy from SAP R/3 47x110 with Oracle 10.2 to Oracle 11.2
Hello,
I want to do a system copy from SAP R/3 4.7 Enterprise 47x110 with Oracle 10.2 to a new machine with same SAP version but with oracle 11.2. (After this I will upgrade to ERP 6.0)
I will do this with export/import but I don't find any documentation (manuals or notes).
I only find this:
Note 1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10
but this note is only for a new installation, I don't know if this work with system copy
Note 516246 - INST- System Copy for SAP Systems based on SAP Web AS 6.20
This don't have information about oracle 11.2
I read the manual "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20" but this also don't say nothing about oracle 11.2
Can you help me? Where can I find this documentation and what DVDs (master and kernel) should I use?
Best regardsHi Juan,
Thanks for your answer.
That is my doubt, what installation master shoud I use for export oracle 10.2 and import in oracle 11.2?
Note "1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10" say that I can use installation master of R/3 4.7 Set 2 (47x200) to install a new system.
I found this media:
51033746_9 Installation Master 6.20/6.40 Linux on x86_64 64bit
and
51040087_7 NW 04 SR1 Inst. Mst. Linux x86_64 64bit f. Oracle 10.2/11.2
I think this is the note that I need:
Note 1478351 - Oracle 11g Support on UNIX: 6.40-Based SAP Systems -
Two SAP production systems in a single physical server
Dear All,
Is SAP support installing two SAP production systems like SAP ECC 6.0 of one customer and ECC 6.0 with a different SID and instance no. for another customer in a single physical server? Would like to know from the experts is this possible? If yes , what are the things to take care of this design if any?
Thanks
HanyHi ,
check below blog
You can check the following blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5124. [original link is broken]
It helps you to understand different logon pages for portal
Koti Reddy
Maybe you are looking for
-
Private Browsing keeps turning itself off
Is Private Browsing supposed to only be temporary? Every time I restart Safari 6, Private Browsing turns it self back off again. I wouldnt even care really if it didnt broadcast my current browsing activites to my family-used iPad! Talk about securit
-
How to deploy disabled Firefox as the default PDF viewer via GPO
I am trying to change the settings of 204 Windows 7 PCs. They all use Firefox and with have Adobe Acrobat XI. I would like to know how to use the Mozilla Administrative Template or how to create a GPO to change the default pdf viewer in Firefox to Ac
-
Cstmt.execute() returning false
I am trying to insert values in db table by using CallableStatement but cstmt.execute() always returning false here is code try //Connection conn = (Connection)oapagecontext.getApplicationModule(oawebbean).getOADBTransaction().get
-
[SOLVED] How do I find out what packages are installed in a distro?
Okay. I was running Arch before, but GNOME had a bunch of problems that I couldn't fix myself, so I reformatted and went to Peppermint OS (it's a cloud-based system), and I absolutely love it. Now, the thing is, it's even slower than my Arch system w
-
Not able to send UWL Notifications as Mail
Hi, I implemented Guided Procedure with two roles. The completion of activity / task of first role intimates the second role thru' UWL. I can see the activity / task for the second role in UWL once the activity / task is completed from the first role