Multiple Schema Creation with One Source system Via SLT

Hi all,
we have BW on HANA environment at our company premises, with SLT server installed
So, my Question is that is it possible to create more than one schema in HANA system with one Source system
As an example, lets say, ECC (Client 601) Source System has been connected to HANA via SLT and created Schema called SCHEMA_1 and again i want to create SCHEMA_2 by connecting same ECC (Client 601) source System.
please help me to short this out?
Thanks
Mirana

Hi Mirana,
Yes, it is possible to create more than one schema in HANA system with one Source system.
Please go through the Official SAP LT document for more details @ page number 13
http://www.saphana.com/servlet/JiveServlet/previewBody/1811-102-5-5419/SAP_LT_Replication_Server_for_SAP_HANA_SPS05_Over…

Similar Messages

No of Target systems to One source system via TDMS

Hello,
Wondering if any one in this group have worked on a scenario, where there is 1 source / ECC, and 5-6 target systems/clients.
The reason for asking this question : I have an RFC connection set between the source and target 1, and there is another RFC set from Source to Target 2.
Now, I have 4-5 projects created in TDMS/controller, and when I want to delete a project ( which is configured with source and target 1), I had to deactivate the package in the project, that inturn deactivated the RFC connections of Source and Target 1.
Now, when I am trying to create a landscape between source 1 to target 2, and when I clicked on the distribute RFC connections, it throws an error.
ERROR DETAILS:
Destination MBT_DD1_ED2_130_00_MBT deactivated or bad state - Connection check not allowed. Message no. CNVMBTRFC123 Diagnosis Connection check for a destination is not allowed. The reason can be that the destination is deactivated, no connection check explicitely choosen, or destination state doesn´t allow the check. Destination is deactivated In table cnvmbtdest in field deactivated you find the information about deactivation state. Keep in mind that for each remote system the state can be different for the destinations. Viewing deactiavation state see heading 'Get destination and deactivaten state'. No connection check explicitely choosen When calling the function for checking the connection we have an import parameter no_connection_check. If this parameter is set then no connection check will be done. Destination state doesn´t allow the check In table cnvmbtdeststate you find the state for a destination (also called connection state). If there is no entry then it can be assumed that the destination is OK. If there is an entry then all states with exception of O (connection OK) and the initial entry indicating that there is something not OK with the destination and no connection check will be done untill the issue is fixed. For destinations in the control system you find the destination state in the control system and for destinations in the remote system accordingly in these systems. Viewing destination state state see heading 'Get destination and deactivation state'.
Wondering if someone can help in fixing this. Thanks,

Thanks Anita,
Will go through the note and will revert back, incase of any further issues.
Also, I want to know why I am not able to delete a project, and when trying to delete a project, that doesn't have a package in it, gives an error. something that says, 500 sap internal error, screen output without connection to user ( termination : RABAX_STATE)
Also, based on my earlier msg, I was trying to go through the tcode " SET_RFC_STATE".
Surprisingly, I see all the Projects that I created with the earlier source/target/RFC connections.
Is there a way to get rid of these projects/ packages which are not in USE.
Thanks,

One report, One Source System with multiple Company Codes -- Authorization

Hello Guys
We have 2 DEV source systems for our BI implementation right now. one for US (CCode - 406) an one UK(CCode - 301).
We have already completed the implementation for UK with 38 reports.
we are right now moving the US implementation.
when we move to QAS we are going to have one Source system with both US and UK data.
so when we move to QAS, the US clients wants to view the reports developed in UK implementation with their own data.
How can we do that. since some reports doesn't have company code to restrict the data to respective users.
Thanks and Kind regards,
shekar.

Hi
First make the company code authorization relevant in infoobject BEx explore tab
If your in BI7 , you have analysis authorization concept
http://help.sap.com/saphelp_nw70/helpdata/en/66/019441b8972e7be10000000a1550b0/frameset.htm
Regards
N Ganesh

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

Copy Transferrules from one source system to another

Hi everybody,
we're uploading data from nearly 25 sourcesystems (including separate systems and systems with more than one client to extract from) via flat-file. The source-system exports data to a shared file directory and the bw-system reads it from there. Though this results in only <b>one</b> transferrule for all source-systems, it keeps generating problems every time upload is due.
Somebody had the idea to switch to 'standard' R/3->BW method of data staging, using generic extractors and so on. But this will result in <b>25</b> transferrules which, I'm afraid, have to be set up and maintained seperately. As there's quite some coding in the rules (the transfertructure in fact has 241 fields), flaws are for sure!
We know the trick of exporting a transferrule, changing the source-system-mapping and re-importing the same transport-request. That can be used to copy to one or two other systems, but not for 25.
Does anybody know another way to copy a transferrule from one source system to multiple other source systems?
Looking forward to your answers
Thanks and Regards
Robert

Hi Ralph,
I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
What do you think of the following idea to solve the issue a totally different way:
All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
Regards
Robert

Connect two BW systems to one source system

Hi Experts!
I would like to know if I can set up two BW systems connect to one source system. We copied and built new BW system (BW2) from existing BW system (BW1). We need to have both system connect to one source system. When I execut Restore from BW2 - RSA1 - Source System, I'm getting a following prompt:
"Connection cannot be used. The connection BB is used in the DEV400 source system as a connection BW1400 to BW. Do you want to delete this connection in source system".
If I select "Delete" then it replace exising connection between BW1 - DEV and creates new connection BW2 - DEV. If I go back to BW1 and do restore then same thing happens as BW2 connection removed.
Is there anyway we can set up two BW systems connection to one source system with restore? Connection works fine since each one can connection with no issues. Just when I do restore, it removes other connection.
Thanks.

Check if it helps:
Loading two different SAP BW system from one SAP R/3

How to FaceTime and iMessage on multiple apple devices with one iTunes account

We recently received iPad 2's for Christmas and was looking for some advice on how to FaceTime and iMessage on multiple apple devices with One iTunes Account (Apple Id). I have created or attached other e-mail addresses to our apple id but do not know how to use them on the new devices. Our home MacBook Pro uses our main apple id for FaceTime. The iPads have been setup with the main apple id w/o being able to use FaceTime and iMessage.
Please Help...
I appreciate the help and support.

P and V-
If you are trying to connect to someone with a different Apple ID, I think all the devices should work, but one at a time.
The problem is when you try to connect between two with the same Apple ID. Once the calling device tries to make the connection, it finds the second device to be "busy". That is where each needs to use a different E-Mail address when setting it up.
On iOS devices, when you press the Home button to exit an App, the App may still be active in the background, even when the device is sleeping. If FaceTime or iMessage is merely being active that way, it may be enough to "tie up" the E-Mail address.
From the Home screen, double click your Home button. You will see a list of recent Apps along the bottom of the screen. Press and hold on one of them until they start to wiggle. You will then see a red minus sign on each. Pressing the minus sign will remove an App from the list, and stop it from working in the background. (Click the Home button to stop the wiggling, and again to hide the recent Apps.)
Fred

Can you have multiple iCloud's with one Apple ID?

Can you have multiple iCloud's with one Apple ID?

You can have multiple iclouds with multiple id's

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

Can Insosource be fed by more than one source system

Hi
Can Insosource be fed by more than one source system?
One from R/3 and other from flat file?
Its urgent?

You can have multipple source systems to the same infosource and load them through separate infopackages.
Create a new infosource for flat file and assign it to the object ... ,
it is very similar to how you would do it for an R/3 source , but here there will be no datasource to choose froim since it will be a flat file.
Arun

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

COPA - Multiple Sales Order with one wbs element. COPA does not reference

COPA - Multiple Sales Order with one wbs element. COPA does not reference of reference of sales order.
Hi All
Currently we are in process of implementation of project related to Club Service for one of the client.
Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
u2022     IDM
u2022     Software Installation
u2022     Help Desk
u2022     Maintenance
Co.. "X' is performing these services for IBM.    So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
Project IBM Inc. 100.100
WBS Element    100.100.IDM
WBS Element    100.100.SoftIns
WBS Element    100.100.HelpDesk
WBS Element    100.100.Maintainance
For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element. In a sales order, there may be two lines for one services.   In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA. In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
Sales Order Line Item No.....Item                  Account Assignment                      Revenue
10000          100     IDM      100.100.IDM              1000
10000          200     HELPDESK      100.100.HelpDesk              2000
10000          100     Maintenance      100.100.Maintainance         3000
Another Sales order booked with two different line items
10000          100      IDM     100.100.IDM          3000
10000          200      HELPDESK     100.100.HelpDesk          4000
Cost will be booked directly against WBS element.
In sales order level, there is no profitability segment, as cost object is WBS element.
Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
Now in COPA,
1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this. So we can not have reporting to sales order level.
Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
Please help in this issue.
Regards
Abhay Dev
Ph:- 91-22-67782229
Cell:- 91-9819175185

Hi,
For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.
Regards
Sreekanth

BW: Connect to new source system via special transport

Hello everyone!
I have a BW system connected to an R/3 source system. I have made a copy of the source system. Now I want all my models to be connected to both source systems. I heard that this can be achieved via special transport (i.e. place all source system dependant objects into a special transport request to be imported back into my BW system, but with the new source system assignment). Does anyone have any documentation on how to do this?
Best Regards and Merry Xmas!
Luís Andrade.

Hi Luis,
There are two parts,
1) If you want to transport all your objects from current R/3 system to newly created r/3 system then you can create a TR and use it in SCC4 transaction during client copy. In the same fashion you can use RSA1---> transport connection and use the TR for system copy. After that once you release this TR all the objects will move from one system to another.
2) But if you have already moved all the objects in source system but now you want them to replicate in BI then go to SAP BI system select your source system and then from the context menu choose replicate datsources option, it will fetch everything from respective source system in BI.
Regards,
Durgesh.

How to update multiple Sales Orders with one IDOC using IDOC_INPUT_ORDCHG

Hi Gurus,
Here's my scenario:
Consider there are 2 Sales Orders for same Purchase Order -
Open Quantity
Sales Order 1
Article A1
1
Sales Order 2
Article A2
1
Say if I want to change Open Quantity of both SO 1 & SO2 by dispatching 1 Quantity each for Article A1 and A2 via ORDCHG, observed that in Include LVEDBF0N, XVBAK-VBELN is checked for only 1 Sales Order.
Whether it is possible to update multiple SOs with one IDOC using IDOC_INPUT_ORDCHG?

Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

Multiple repeating frames with same source printing same Values

Dear all,
I have a report which is having more than 10 repating frames in this 4 repating frames have same source assingned,during the report execution just before printing the repeating frames at various levels am inserting records into the source table assignd to the 4 repating frames.i actually want the repeating frames to print values i just inserted in to the table,diffrent repeating frames should print diffrent values.
i have put source query like this;
select * from <table> where print_status is null.
just before printing the repeating frames am inserting values in to this table
insert into <table> values ();
print repeating frame 1
insert
print repeating frame 2
insert
print repeating frame 3
insert
print repeating frame 4
in this particular case the report is printing only one row which i have inserted before printing the repeating frame 1.(basically the query is not refreshing at various grups)
I want to print records which is inserted at each level .using one source query and 4 diffrent repeating frames.
Hope am clear with my query.

Dear Kumar,
You are exactly right, but during the execution of the report at different interval I am modifying the data of the source table.
Dear Andreas,
Currently am modifying an existing report which is designed few years before, and having hell lot of frames and repeating frames and I need to include the above said portion between these repeating frames. The major reason why i tried to adopt this method is, during the execution of the report at each different intervals I am doing some calculation and then inserting the results into a global temporary table, again the same global temporary table am trying to print it in different places .Since I have multiple rows to print from this table I am using a repeating frame.
I have resolved this issue using packages and assigning values into packaged variables. But I had a gut feeling that declaring too much variables might confuse others especially some other developer.
Edited by: mayannajeeb on Jun 8, 2010 12:27 PM

Multiple Schema Creation with One Source system Via SLT

Similar Messages

Maybe you are looking for