Multiple Screens in Mac OS 10.5.6

Hi everyone,
I was wondering if it's possible to connect one screen with VGA to another screen and then connect one of those screens to a macbook pro and have them both working? Or do you realy need to buy an adaptor or firewire screen for that?
I hope this is the right section to ask my question.
Tyvm, Jordy

You cannot run Photoshop 7.x on any version of Leopard (10.5.x), period.
Photoshop 7.x runs fine in earlier versions of OS X, up to Tiger 10.4.11.
Leopard, 10.5.x, does NOT support Classic at all. You cannot install a "Classic environment" in 10.5.x.
The current version of Leopard is 10.5.7. You cannot use Photoshop 7 at all. You can't even install it because the installer will not run in 10.5.x, you must have either cloned it, migrated it or installed it in an earlier version of OS, not 10.5.x.

Similar Messages

Fullscreen Multiple Screens Mac

Is it possible to go fullscreen on multiple screens on mac?
I can't get it to work.
Then i tried a workaround with an UNDECORATED stage.
but this gives this http://postimage.org/image/565ld2m1b/
where the blue is the desktop.
Code: -----
     private void setupStageFullScreen(Stage stage, int screenNumber) {
          ObservableList<Screen> screens = Screen.getScreens();
          Screen screen = screens.size() <= screenNumber ? Screen.getPrimary() : screens.get(screenNumber);
          Rectangle2D bounds = screen.getBounds();
          stage.setX(bounds.getMinX()+1);
          stage.setY(bounds.getMinY()+1);
          stage.setWidth(bounds.getWidth());
          stage.setHeight(bounds.getHeight());
          if(screen.equals(Screen.getPrimary())) {
               stage.setFullScreen(true);
          } else {
               stage.toFront();
     }

A DMP connects to a single screen as it has a single HDMI output. Some monitors allow daisy chaining across multiple monitors but this a function of the monitor not the DMP. With this option you can get the image to fit across multiple monitors like a 2x2 monitor setup. The primary monitor connects to the DMP and then the rest of the monitors connect monitor to monitor using a HDMI cable. You then program the main monitor for how you want the screens to show the image.
The datasheet is referring to content can be placed in separate regions on a monitor. This way you could have a video in one region, text/image in another and an RSS feed in a third.
Hope this helps.

Can i have multiple screens on my mac book pro when connected to my iMac using a firewire cable?

What do I need to have multiple screens when I connect my iMac to my Mac book

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Are there any mac screen savers for multiple screens

Are there any mac screen savers for multiple screens? like the one in the swordfish movie with john travolta haha

screensaver +, free from the apps store, will do two monitors. It does not do three monitors .

How to change where the login option appears on multiple screens?

God morning.
I have multiple screens on my Mac Pro. A normal screen, a projector and a USB-to-DVI converter.
When I log in the login screen appears on either the projector or the converter screens. Not on the normal screen. I need to drag the cables out for the login to enter on the normal screen. The normal screen is set to the primary screen so thats not the problem. Anyone with solution?
Thanks!
Eivind.

Weird. I have multuple monitors and the boot stuff always appears on my main monitor.
See if smc and pram reset clears the problem.
I have multiple screens on my Mac Pro. A normal screen, a projector and a USB-to-DVI converter.
What video card are you using? And USB-to-DVI is not the usual way for connecting monitors. I wonder if that is confusing things. So out of curiousity what happens if that monitor is not connected?

Android Multiple Screens

Hi,
I was wondering if it is possible with Adobe air to allow for multiple screens in Android. I have a HTC Incredible and a Galaxy Nexus both of which support video out. Android currently only supports mirroring for Video out. I wanted to know if it would be possible for adobe air to recognize the video out of the device as an external display that use either a MHL HDMI Out (Galaxy Nexus) or Analog-Composite video out (HTC Incredible). To illustrate a scenario that would use this: let say the app is a gallery and has x amount of pictures. The user has a video out cable connected and is recognized as the second monitor. Once the user sees a picture they like they would click on the image. Once the image is clicked it is sent to the 2nd display (the video out of the Android device) so the picture is being displayed on the larger screen while the user is still free to browse the pictures. Is this in realm of Adobe Air capabilities? Or am I misinterpreting "Multiscreen Development"?
Thanks,
-Nick

Hello,
Anyone have information about this problem ? I have warning about hight resolution for tablet when I publish my application on Android Store ?
Thanks for you help.

SRM 7.0 Multiple screen for singe document

Hi Experts,
In SRM 7.0 when I select an SC and click create confirmation button, a pop-up window gets open for the confirmation to be entered.
At this stage, If I click the create confirmation button again on the parent screen a new window get open for confirmation.
Now I am able to create 2 confirmation document for the same shopping cart with the same qty.
Can this be avoided? Is it possible to get the parent screen inactive while working on the pop-up/child screen?
Any better ideas/solution?
Thanks,

Hi,
Please test with NetWeaver Portal Personalization - Work Protect Mode. Ther is an option Discard unsaved data (open page in same window). If it does not help I think ther is no easy way. BTW, my clients are very happy with multiple screen function and item copy&past function between screens.
Regards,
Masa

Multiple "On My Mac" folders in Mail app

I have one me.com email address and 6 email address from other sources. My Archive box looks like this in Apple Mail.
These multiple "On My Mac" folders don't make any sense as EACH folder contains all archived emails (they are identical). When I tried to delete one they all disappeared - including the me.com box - I had to restore them to get my archived mail out of the trash. I thought there would be a box for each email address and the respective mail would be filed in the appropriate box. Having 7 boxes with identical content doesn't seem like the Apple thing to do.
My question is: Is this the way the Archive box is supposed to be? If not, anyone know of a fix? Thanks in advanced.
Mavericks 10.9.4
iMac 3.5GHz Intel Core i7
RAM 16GB 1600 MHz DDR3
Mail version: Version 7.3 (1878.6)

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. ClickOK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

How do I share iTunes with multiple users on Mac mini?

How do I share iTunes with multiple users on Mac mini?

You have to turn on Sharing and then Authenticate Sharing on the other devices. You can have up to 5.

How do you get multiple screens on the iPad with iOS 5.1.1?

How do you get multiple screens on the iPad with iOS 5.1.1? We just upgraded to iOS 5.1.1, and we see no way to be able to open multiple screens at once. Before, there was a small button in the upper portion of any window. That button would take you from a particular window to the place where multiple windows are open at once. Does it do it differently? Is there a special setting button that we have missed? Thanks!
One more thing: We are only talking about Safari.

Guitaristica-
I don't think I've seen a way to have separate Safari screens visible at the same time. The small thumbnails were deleted in one of the iOS updates, and replaced with a multiple "Tab" system.
You can open an additional screen in a new "tab" by pressing and holding on a link until a new menu comes up.
Fred

Multiple On My Mac accounts

Both my MacBook and iMac are showing multiple On My Mac accounts in Mail 3.0. How do I delete one? I suspect this is related to problems I've had with .Mac Syncing since installing Leopard.

Hi,
I don't know, but i know that you posted in the wrong forum. This OSX Panther not Leopard.
Go back to the main page of this forum an copy/past your question again.
Good luck ...
Dimaxum

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Lock Screen in Mac OS X Lion

Hello,
I use Mac OS X 10.7.4 and my lock screen (the one that comes up when the computer is a wake from sleep mode and asks for a password) has returned to be the lock screen from Mac OS X 10.6 versions.
I don't think it's a big deal but it might be file that was modified or something and I don't want it to become serious, so I want to know if anyone know how to fix it, and if you do know please post here.
Thank you for helping.

AsafHr
I am experiencing the same issue.
In my case, the old style lock screen is limited to just one user account (my domain/network account) and the change happened sometime after installing 10.7.4. All of the other user accounts use the newer, Lion style, lock screen.
I've searched for more information on which file(s) might be causing the problem, but I have yet to find any information.
Hopefully, someone can provide some guidance and insight.

Call multiple screens from LSMw

Hi
i want to call multiple screens from lsmw
I need to call a three transaction from LSMW wich are subzequent steps for data entry.
1) first tcode to be called is eprodcust which creates some master data and using this master data and some fields of data creatd i need to call two more tcodes first iq01 to create meter and save then eg31 tcod to feed data.
Please suggest where in lsmw can i give options for suc hscnerio and call of subsequent screens.
regards
Edited by: Prieti_V on Nov 8, 2011 8:28 PM

Hi Priti ,
we have few options to handle such cases , to avoid Locked Problems what you can do is
-->write BDC program within LSMW to create installation ( this will be created within step of 11 Convert Data ).
-->Based on the above BDC results ,run another BDC within LSMW to create Device.( this will be created within step of 11 Convert Data ).
-->third BDC records , let SAP do it thru LSMW or can you do it convert data step itself.
this approch needs lots of codes , so in worst case and if you dont want to break the loadings the follow this.
*Better to find any BAPI which will do creation of installation ,devices
regards
Prabhu

Opening multiple screens in safari

how do i open multiple screens using safari???

Cmd-N on the keyboard opens a new window.
Also, +File -> New Window+ from the menu bar does the same thing.
You can also open a new tab in an existing window (click the plus sign or Cmd-T). Then click-hold on the tab and drag it outside the current window. A new window will open from the tab.

Multiple Screens in Mac OS 10.5.6

Similar Messages

Maybe you are looking for