Multiple Search Suffixes

Our internal network is comprised of multiple companies purchased over the past couple of years. Unfortunately we still have a lot of legacy DNS going on and like 6 different domains on the inside. Is there a good way to push all 6 dns search suffixes out to the AnyConnect VPN Client? I tried the split DNS method I found online but when I did it broke DNS completely. The client was using the local hosts preconfigured DNS servers and not getting the internal network ones.
Thanks
Michael

Hi Terence,
Thanks for the tip. It's a nice way to do it, I didn't know it was possible and this could save me some time.
Still, I don't think that creating a smart mailbox is an ideal way to do a search but this could do the trick for now. I hope that multiple search will be integrated in next Mail.
Laurent

Similar Messages

ASA Remote Access VPN Clients - Multiple DNS Suffixes?

Hi community!
I am setting up a new remote access VPN using the traditional IPSec client via ASA 5515-X runnning OS 8.6.1(5).
We require to provide each client multiple DNS suffixes, but are only to provide a single DNS suffix in the grouip policy.
I have tested using an external DHCP server, but using our Windows Server 2008 infrastructure and Option 119 the list is not provided to clients, and I have read that Windows 7 clietns may ignore this option anyway.
Other than umanually configuring the clients , does anybody have any other suggestions on how we may get this to work?
Full marks for helpful posts!
Kind regards, Ash.

Hi
I am looking into the same issue, and I am finding conflicting documentation about this and wondered if you got the answers you were looking for.
I have a remote access requirement for users from separate AD's to authenticate through an ASA.
I was reading about Global Catalogue Server but this is not specifically what I want; and also creating a new AAA server group but the user would need to accept which group to use when they log in
Regards

LDAP External Authentication Multiple Search Base DNs question

hi,
im trying two add two LDAP search DNs to a portal 6.2 organisation.
with one search base dn it works fine.
when i add another, all ldap auth for that org stops working.
the docs confusingly state that if you have multiple search dns (not talking about multiple ldap servers here - just the search base dns) that you should prefix each entry with the local server name. the docs however provide no examples of the syntax.
can anyone provide an example for multiple search dns? e.g. is it <server:port>:o=<etc> (doesn't seem to work).
thanks

hi,
yes i have.. but when you enter more than one it stop working... with only one entry in the gui it will work for that entry but when you add another it stops working...
i had to use a manual workaround like this to get the second going... :(
External ldap authentication
register the LDAP authentication service in the gui and setup the first DN as normal.
create the first set of entries for the ldap host and the base dn in the gui as normal etc.
the gui in the admin console is not working (depending on your point of view), so you need to add the second ldap config manually -
All commands are run from the /apps/jes/SUNWam/bin directory
1. Get an encrypted value for the bind dns (cn=Directory Manager) password you want to bind to the ldap directory as by using the ampassword utility shipped with Identity Server.
./ampassword -e directory_manager password
More information on this utility can be found in the Sun ONE Identity Server Administration Guide.
2. Copy the encrypted password as the value for the iplanet-am-auth-ldap-bind-passwd in the XML file (serviceAddMultipleLDAPConfigurationRequests.xml) created in Step 1. The XML file contains a template for creating the second LDAP DN.
3. Modify the data XML file accordingly so that the relevant details are provided for the 2nd ldap server (bind dn search base etc) and load this into the portal directory using the amadmin command line tool as follows from the /opt/SUNWam/bin directory
./amadmin -u amadmin -w administrator_password -v -t serviceAddMultipleLDAPConfigurationRequests.xml
If the imported xml values are incorrect delete and reload the imported xml data using amadmin command tool. Alternatively you can modify the ldap data directly on the primary identity server (ldap server) using a client browser though this method is not supported .
You should be able to see new imported values for the second ldap server at dn:ou=subconfig1,ou=default,ou=OrganizationConfig,ou=1.0,ou=iPlanetAMAuthLDAP
Service,ou=services,ou=ORG,o=lgaq.qld.gov.au on the primary ldap server (where ORG is the organisation you wanted to add the second DN).

Enabling Multiple Search in Advanced search

Hi All,
I am trying to enable Multiple search on a particular field in the advanced search for that PCUI application. E.g Search for Opportunities with Partner P1 and P2.
When i perform the search the results show me all opportunities with partner P1 OR Partner P2. So i get all opportunities which belong to partner either P1 or P2 or both
I want to view all opportunities with partner P1 AND P2 i.e i want to search only for those opportunities that have both P1 and P2 in it
Is there anyway we can achieve this
Thanks and Regards,
Varun

Hello,
The MAC for the the advanced search in opportunities (application CRMD_BUS2000111) is CL_CRM_BSP_AM_HEADME_1O.
Create a Z MAC inheriting from this MAC and redefine the method IF_CRM_BSP_MODEL_ACCESS_IL~QUERY.
In you redefined method, you can for example first call the super query method and do your own additional selections after.
The FM used for the standard query is CRM_BSP_OIC_1O_SEARCH_FROM_RF.
You can maybe also check how this FM is called and make you own call of this FM.
Regards,
Frederic

Enabling Spotlight Web Search - Multiple Search Terms and Boolean Searches

Hello there,
I'm trying to incorporate a spotlight web search into my website as per these articles:
http://docs.info.apple.com/article.html?path=ServerAdmin/10.5/en/c3ws21.html
http://support.apple.com/kb/TA23537?viewlocale=en_US
What I'm finding is that the search page provided by using template.spotlight file does not give search results when more that one search term is entered. Additionally, boolean terms (AND, OR, NOT) do not appear to work.
I've tried to edit the template.spotlight file but I'm not sure what to add in order to provide this functionality which is otherwise present in spotlight searches within Mac OS. Has anyone else used the spotlight web search feature for their websites and had success with multiple search terms / boolean searches? Could someone please advise on how to edit template.spotlight to provide these search features?
Thanks in advance,
Leon G

(bump)

Is it possible to have multiple search results page using one Search Enterprise Center site?

Hi,
We're using SharePoint 2013 and I'm trying to modify the search results page for one site collection. By default, it uses the search results page from the parent site which is the search center being used by default for the web application. I need to make
sure that the site collection will only retrieve search results within the site collection (search everything has to be disabled). I found a way but I had to create another search center site to accomplish this, otherwise, it will affect the search center
site of all other site collections on the web app.
Now is it possible to have multiple search results page using one Search Enterprise Center site?

Hi,
According to your description, you want to retrieve the search results within the site collection.
As a workaround, you can create a custom result source for the site collection and you will retrieve the search result within the site collection.
More information about how to create result source in SharePoint 2013, please refer to :
http://technet.microsoft.com/en-us/library/jj683115(v=office.15).aspx
http://techmikael.blogspot.com/2013/04/limiting-search-results-in-sharepoint.html
Best regards

Sorting Multiple colunms and carry out multiple Searches

Hello
i would like to now i can carry out multiple searches for a single record. I have listed the some below
Server Name Db Name Schema Name Change Reference Person
GBCCCL15/16--CSAHEPA---DCDMIN----------46935-------------------
GBCCCL15/16--CSAHEPA---NCADMIN----------46935-------------------
GBCCCL15/16--CSAHEPA---BUADMIN----------47775-------------------
GBCCCL15/16--CSAHEPA--- PPADMIN----------48213-------------------
i would like to be able 2 carry out multiple searches on for example Schema Name (NCADMIN) and the Person's (Peter Salt) as i have a number of records that are similar i would like the Application to carryout multiple searches on the column reports at the moment all searches are done per column.

Pritesh,
Can you please clarify what this means? When you say "multiple searches", to me that implies that you want to issue multiple distinct queries, all executing concurrently. I can't believe my understanding is correct.
Joel

Multiple searching options

hi experts,
i need to create one searching iview but has multiple search options. The purpose is to let the user search for documents using one iView only (we have many types of documents with different metadata). We try to separate the options by tab. Is it possible? We are using SAPNetweaver portal 7.0.
Thanks,
Rgds,
Nanie Arianie

Hi Shah,
You can achive the above said by creating separate indexes for the folders containing the documents.
Follow the following steps,
1.Create separate indexes for the KM folders under the following path in Portal,
System Administration > System Configuration > Knowledge Management > Index Management
If you want to group the indexes , you have to specify the group name during creation of the index.
Add the folder as a Data Source to the respective indexes.
2.Create Search Options Set under the following path and mention the indexes or search index group in it.
System Administration > System Configuration > Knowledge Management > Content Management > User Interface >
(Change the mode to advanced) select Search >Search Option Set ,
Select the standard UI Search Option set and click on duplicate button , give a name to the new search option set.
Add the indexes created to index option in Option set.
3.Create Search Component Set under the following path and this can be used in iview properties,
System Administration > System Configuration > Knowledge Management > Content Management > User Interface >
(Change the mode to advanced) select Search > Search Component Set,
Select the standard UISearchComponents and create a duplicate copy of the same and give a custom name to the same.
4.Create iview from application or copy search iview from the standard content.After creating the iview update the properties with the above created option set and component set.
Option set will establish a connectivity between the iview and the created indexes..
Advanced Search UI and results can be customized by customizing the Search component set and Layout sets.
Hope this will help you.
Regards,
RD,
Rudradev Devulapelli.

UME user search with multiple search fields (AND / OR search)

Hi,
I'm struggling with a UME user search problem. I have multiple search fields: lastname, firstname, department
Searching in this fields is working with the default IPrincipalSearchFilter.SEARCHMETHOD_AND (default)
<a href="http://help.sap.com/javadocs/NW04/current/um/com/sap/security/api/IPrincipalSearchFilter.html#setSearchMethod(int)">JavaDocs SearchMethod_AND</a>
Now I would like to add an additional search field for searching in telephone, cellphone as well. BUT searching for a phone number with searching for one of the other fields should not be a AND search. Is this possible?
Here is the actual non-working code:
     Vector retVector = new Vector();
     //get Userdata with IUserFactory
     IResourceFactory resourceFactory = ResourceFactory.getInstance();
     IURLGeneratorService urlGen = (IURLGeneratorService)resourceFactory.getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
     IUserFactory userFac = UMFactory.getUserFactory();
     IUserSearchFilter srcFilter = null;
     try
          srcFilter = userFac.getUserSearchFilter();
     } catch (UMException e)
          // TODO Auto-generated catch block
          e.printStackTrace();
     if(lastName.length() > 0)
          srcFilter.setLastName(lastName + "*",ISearchAttribute.LIKE_OPERATOR, false);
     if(firstName.length() > 0)
          srcFilter.setFirstName(firstName + "*",ISearchAttribute.LIKE_OPERATOR, false);
     if(department.length() > 0)
          srcFilter.setDepartment(department + "*", ISearchAttribute.LIKE_OPERATOR, false);
//Here I need help!!!!!!! Please advice!!!
     if(telephone.length() > 0)
          srcFilter.setTelephone("*" + telephone, ISearchAttribute.LIKE_OPERATOR, false);
          srcFilter.setCellPhone("*" + telephone, ISearchAttribute.LIKE_OPERATOR, false);
     //if(mobil.length() > 0)
     //     srcFilter.setCellPhone("*" + mobil, ISearchAttribute.LIKE_OPERATOR, false);
     //Set maxium value for Result and thus limit the static variable SIZE_LIMIT_EXCEEDED
     //This method can only be used, if only one search attribute is specified -> thanks SAP
     if(srcFilter.getElementSize() <= 1)
          srcFilter.setMaxSearchResultSize(300);
     ISearchResult srcResult = null;
     try
          srcResult = userFac.searchUsers(srcFilter);
     } catch (UMException e1)
          // TODO Auto-generated catch block
          e1.printStackTrace();
Thanks for any help...
Stefan

Hello,
I could still need some help. Is there no one who could give me a tip? Could I explain my problem clearly enough or do you need some more information about my problem?
Or is the search topic with searchFilter not a very common used thing?
Is there a possibility to do a search in the received search result? Can anyone explain how this would work?
Any ideas are welcome.
Regards,
Stefan

Multiple Search in next version of Mail ?

I often need the use of a "multiple search" option in Mail. I have found a program that does that : http://www.mailsteward.com, but it's not integrated in Mail, and the search results are not very Mac-friendly.
Is "multiple search" going to be implemented in Mail for Leopard ?
Thanks,
Laurent

Hi Terence,
Thanks for the tip. It's a nice way to do it, I didn't know it was possible and this could save me some time.
Still, I don't think that creating a smart mailbox is an ideal way to do a search but this could do the trick for now. I hope that multiple search will be integrated in next Mail.
Laurent

Multiple search using ldapsearch

Hi
Does anyone know how to do multiple searches using ldapsearch? There is an option of -f with ldapsearch but its not working. Can anybody give some examples of this option ?
Thanks
Rajeev

You can use colon in any database item on runtime in entery query mode and it will prompt you to enter values/conditions on execute query where you can check any database item value. It will add the conditions in the where clause of the block. May be it will help in what you are looking for.

Registry LDAP - Multiple search bases x single search base

Hi all,
I have a doubt, in my scenario I have two LDAP domains and isn't clear to me if I need to use the Oracle Registry configured to multiple search or single search. In the documentation the explanation is: To use single configuration when you have one single search base and to use multiple configuration when you hava multiple search bases, besides that, the Registry documentation says multiple search bases scenario it will looking for a user in all domains, in case a domain isn't specified by the user. The questions are what the diference between single and multiple configuration and what is a search base?
Any idea,
Afonso

Hi BBCR,
I'm not sure if the use of groups provides a solution to this requirement. One way to do it would be to define attribute access controls using a filter with substitution syntax. For example, you could have a filter for Modify access on a user's attributes defined like:
(&(o=$o$)(admin=true))
which means that anyone who has a value of the "o" attribute the same as the target user AND has a value of "true" for the admin attribute can write to those attributes. You can also add Self as a role so that users can view/modify their own attributes.
The above filter means that instead of defining group membership and group admin membership, you manipulate attribute values in users profiles to say whether or not a user is an admin, and which users they administer (all users which share the same value of the "o" attribute, in the above case).
Would something like this be an option?
Regards,
Colin

Multiple DNS Search Suffixes

Does anyone know whether it is possible to set more than one DNS search domain for a dial in VPN user?
We currently have a group policy setting below and would like to add domain-b.co.uk to the list of search domains
group-policy RemoteUsers attributes
wins-server value x.x.x.x y.y.y.y
dns-server value a.a.a.a b.b.b.b
vpn-idle-timeout 30
vpn-session-timeout 300
vpn-filter value vpn-filter
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteUsers_splitTunnelAcl
default-domain value domain-a.co.uk

Hi,
According to your description, my understanding is that tool SIEM prompts multiple DNS error NO SUCH NAME for Local IP.
I am wondering which SIEM tool have you used. If it is a 3rd-party tool, I recommend you to contact the vendor/supporter for detailed information about this error.
I am not sure about the environment you have configured and which version of OS used. In general, for windows system, we may use built-in tool, such as event viewer, performance monitor to collect detailed information about error or warning. Besides, monitor
tool such as Network Monitor(http://www.microsoft.com/en-us/download/details.aspx?id=4865) is also helpful to capture packets for further troubleshooting.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to carry out multiple searches on the same engine simultaneously.

As mentioned above. I'm looking for a way to search multiple text at the same time.

Can you give a more detailed example of what you mean?
For example:
* Do you want to type query #1 into the search box or address bar and open it in results tab #1, then type query #2 into the search box or address bar and open it in results tab #2? To do that, hold down the Alt key when pressing Enter or hold down the Ctrl key when clicking the icon that submits your search.
* Do you want to combine numerous queries into a single request to Google and get the results all mixed together? You can use OR (must be in capital letters) with quotation marks or parentheses for grouping. For example: Android OR ios OR "windows phone"
* Something else?

Multiple search help

hi all,
is it a possible to create search help with checkbox or something similar where user can chose several lines and return values
on scree ( several lines-intervals).
Similar situation is on logical base PCH when you chose object ID and have check box.

Hi Nick,
After creating the search help you can create a Search Help exit and in that you can enable multiple selection and the system will automatically display check boxes for you to choose multiple entries.
Regards
Bala

Multiple Search Suffixes

Similar Messages

Maybe you are looking for