Multiple selection column in table control problem

Hi, all.
My issue now is I have a table control on a screen that can let user select multiple records, and then click a button to process those selected record just now. But after I select some records and scroll down the screen, i found out that those record which are selected just now is disappear, and i have to select again.
So, may i know how to fix those records in a table control which i selected earlier during i scroll up and down the table control on the screen?
Thanks in advance.

Hi,
Once you scroll down the item selected above gets deselected this is natural thing in SAP Module Pool.
You can do one thing to avoid such thing is by increasing your screen size where you are displaying the contents.
hope this will solve your problem.
Regards,
Suvendu.

Similar Messages

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

Selection column in Table control..

Hi ,
I have used a table control wizard in my custom screen. And it gives the desired output.
But it doesnot contain the selection column ( used to slelect the table control rows) .
Now i want to add that column to my existing Table control.
1) what changes should i do with my Internal table?
2) What should be included with the Table control in Screen Painter?
I searched the forum..but i didnt get the solution..
If anybody knows pls suggest me..

hi sathya,
this may be helpful to u
goto the screen painter double click on the table control wizard,u will get a pop up screenpainter attributes.
In that pop up towards the end you will have a checkbox w/selcolumn,just check it.you will be able to get theselection column for your table control.
u have to give a name to the selection column and add to the internal table which has the contents of the table control.you can select and unselect the columns using that variable.
regards,
sravanthi

Not setting selected value in column of table control

Hi,
I have MATNR field in table control.
In PAI code is as follow.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
MODULE VALIDATE.
LOOP WITH CONTROL TC_FORMV.
FIELD /SISLEMCU/CNVADTL-MATNR SELECT *
                      FROM /SISLEMCU/CNVA01
                      WHERE WERKS = TXT_PLANT
                      AND CHARG =
                      /SISLEMCU/CNVADTL-CHARG.
                     INTO /SISLEMCU/CNVADTL.
MODULE read_table_control.
ENDLOOP.
MODULE USER_COMMAND_0500.
When i take the help in MATNR column the above query works fine but when i select the entry from help MATNR is not gets set in column in table control.
Plz help me regarding this.
Thankx in adv.
Regards,
Deepak.

When you select a value, PBO as well as PAI gets triggered. When PAI gets triggered, your query gets executed which gives sy-subrc <> 0 and due to this it might not filling the data selected..

Multiple record update in TABLE Control.

Hi All,
I m developing dialog program with table control.
I want to know how to update multiple records through the table control if user selects more than one.
Also depending on some condition i want to change the status of one reocrd and not the column as a display field and won't be editable. I have tried with loop at screen and modify screen, but it is showing the whole column as display only.
ANy solution let me know

Hi,
pls chk this standard pgms.
for examples on table control
demo_dynpro_tabcont_loop
demo_dynpro_tabcont_loop_at
RSDEMO_TABLE_CONTROL
chk a sample code.
DATA :BEGIN OF int_table OCCURS 0,
       fld1 TYPE ztable-fld1,
        fld2 TYPE ztable-fld2,
        fld3 TYPE ztable-fld3,
        chk(1),
      END OF int_factor.
*write the blow code in PAI
LOOP AT int_table WHERE chk = 'X'.
*modify the data base table
MODIFY ztable FROM int_table. "from header
clear int_table
ENDLOOP.
regards
Anver

Toggling between single and multiple selection in a table

I am working on ADF faces. I need to switch between single and multiple selection in <af:table based on a button I select.
I cannot use switcher or rendered property inside <af:table. Only the first one is rendering the second one is not rendering based on the switch
<f:facet name="selection">
<af:tableSelectMany autoSubmit="true"
rendered="#{treeBean.multipleRows}"/>
</f:facet>
<f:facet name="selection">
<af:tableSelectOne autoSubmit="true"
rendered="#{treeBean.singleRows}"/>
</f:facet>
When I use inside the switcher, it doesn't like the parent.
Any ideas would be greatly appreciated.
Thanks,
Vijay.

I have probably misunderstood what your issue is. I do not know what your version of ADF faces is. Here is some sample code working with my version. Please check if your jdev has "rowSelection" attribute. If it has, please try my sampe code
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces">
<jsp:directive.page contentType="text/html;charset=utf-8"/>
<f:view>
<af:document title="tableSelectMany Demo">
<af:form>
<af:panelGroup layout="vertical">
<af:messages/>
<af:selectOneChoice value="#{sessionScope.tableSelection}"
autoSubmit="true"
id="selType"
label="Selection Type">
<af:selectItem label="Single" value="#{null}"/>
<af:selectItem label="Multiple" value="#{true}"/>
</af:selectOneChoice>
<af:table summary="Periodic table"
binding="#{tableActions.table}"
partialTriggers="selType"
rowSelection="#{sessionScope.tableSelection ? 'multiple' : 'single'}"
value="#{periodicTable.tableData}" var="row" rows="10">
<af:column>
<f:facet name="header">
<af:outputText value="Name"/>
</f:facet>
<af:outputText value="#{row.name}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Symbol"/>
</f:facet>
<af:outputText value="#{row.symbol}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Action Column"/>
</f:facet>
<af:commandButton immediate="true" text="Action"
action="#{row.action}"/>
</af:column>
</af:table>
</af:panelGroup>
</af:form>
</af:document>
</f:view>
</jsp:root>

Disable some columns in table control?

Hi
How to disable some columns in table control.
For Ex: Table contains 8 columns.
In first row i want to disable first 4 columns.
in second row i want to disable last 4 columns.
In third row i want to disable first 2 and last 2 columns. How can we achieve this?
Cheers,
Venkys.

HI
Create three attribute in the node which is bound to the table as data source.
say pro1, pro2, and pro3 of type wdy_boolean.
now bind the enabled property of first four column editors to pro1, last 4 to pro2, and pro3 to first 2 and last 2.
then go to the eventhandler of the dropdown 's on select event and write the code to update the values of these attribute
according to the selected value.
here is the sample code.
DATA lo_nd TYPE REF TO if_wd_context_node.
    DATA lo_el TYPE REF TO if_wd_context_element.
        DATA lv_VAL LIKE ls_dealer1-name.
    lo_nd = wd_context->get_child_node( name = 'DEALER1').
lo_el = lo_nd->get_element( ).
    lo_el->get_attribute(
      EXPORTING
        name = `NAME`
      IMPORTING
        value = lv_VAL ).
     DATA PR1 TYPE WDY_BOOLEAN.
     DATA PR2 TYPE WDY_BOOLEAN.
     DATA PR3 TYPE WDY_BOOLEAN.
PR1 = ABAP_TRUE.
PR2 = ABAP_TRUE.
PR3 = ABAP_TRUE.
IF LV_VAL EQ 'A'.
PR1 = ABAP_FALSE.
PR2 = ABAP_TRUE.
PR3 = ABAP_TRUE.
   ELSEIF LV_VAL EQ 'B'.
PR1 = ABAP_TRUE.
PR2 = ABAP_FALSE.
PR3 = ABAP_TRUE.
ELSEIF LV_VAL EQ 'C'.
PR1 = ABAP_TRUE.
PR2 = ABAP_TRUE.
PR3 = ABAP_FALSE.
ENDIF.
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO1'
   VALUE = PR1
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO2'
   VALUE = PR2
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO3'
   VALUE = PR3
thanks
sarbjeet singh

Selecting rows in table control

Hi experts,
I have question regarding selecting rows in table control. How can I select a row when a button is pressed. I cannot use the selection column in this case. Is there any option to achieve my requirement without using the selection column. Thanks.
regards,
sriram.

By,
Using the Get cursor syntax you can achive the Selected row in Table control.
DATA : selrow TYPE i,
selindex TYPE i .
* getting the cursor line in Table Control for selected row
GET CURSOR FIELD selfield LINE selrow.
selindex = <tablecontrol>-top_line + selrow - 1.
Prabhu

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to Enable and Disable column in Table Control.

Hi all,
I want to make certain column of Table control as Enable or Disable on Button action.
Enable means ready for input and Disable means not ready for input.
Please send me sample code.
Thanks in advance.

Hi Vipin,
    You have to loop through the table columns to set the properties in the PBO of your screen.
Here is the sample solution.
delcare a workarea for the columns in the table control in your top include.
Table Control .
CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN '0100'.
DATA: WA_COLS LIKE LINE OF TAB1-COLS.
in your screen
PROCESS BEFORE OUTPUT.
MODULE INTIALISE_100.
*&      Module 0100_INTIALISE OUTPUT
MODULE INTIALISE_100 OUTPUT.
    LOOP AT TAB1-COLS INTO WA_COLS.
      WA_COLS-SCREEN-INPUT = 1.
      MODIFY TAB1-COLS FROM WA_COLS TRANSPORTING SCREEN-INPUT.
    ENDLOOP.
ENDMODULE.                 " 0100_INTIALISE OUTPUT
modify the screen-input property as required for the table control columns.
Please provide points if helpfull.....
Thanks,
Karthik
Message was edited by: Karthik
        Karthikeyan K

How to add column in table control for transaction APPCREATE

Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...

You can add new columns
If you add new columns in tr. PHAP_CATALOG

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

How to get sum of quantity column in table control

Hi, expert ,
Someone can guide me how to get som of qty column in table control ?
I created a screen with a table control and has a qty quantity field .
I want to show total of qty in a field .
my code like this ...
PROCESS AFTER INPUT.
LOOP AT I_tab.
    CHAIN.
       FIELD I_tab-COUNTQTY MODULE caculate_total_qty .
    endchain.
    MODULE UPDATE_TOTAL_QTY .
ENDLOOP.
but, when I Back to the previous screen
It's caculate again so I always get wrong Total quantity .
anyone can help me ...

Hi , Dhina
I have another question .
I use internal table data in table control to update database table .
The data in the db will be change ,
but each record I want to delete in table control , it's still exist in database .
my code is
WHEN 'SAVE'
     MODIFY YDSGBT53 FROM TABLE I_YDSGBT53 .
     COMMIT WORK .
END CASE
How to fix my code and let it can change and delete data in database ?
or
when I delete record in table control I must to delete data in the database too .
Edited by: TitusFang on Jun 16, 2011 3:21 AM

Record selected in the table control

Hi All,
How do i know the line no of the record selected in the table control.I have declared a table control CONTROLS : t_control1 type tableview using screen 200.But in t_control1-current_line the line no that is stored is always 1.
Thanks,
Rakesh.

in table control property window you have to set that suppose you have set itab-mark as the sel field then it will always be X if you select the field ...
regards
shiba dutta

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

Multiple selection column in table control problem

Similar Messages

Maybe you are looking for