Multiple selection list and passing that value to oracle reports

Hi
I need to create a multiple selection list and then based on use selection, I need to pass that value to oracle reports. Can any one help with steps on how I can do this. Thanks

Hi
Concatenate the multiple values into a string separated by comma and then pass that string to report as a parameter.
In report query, you have to use the lexical parameter using ' & '
regards
SD

Similar Messages

APEX 4.0.2 Multi-selection on a cascade LOV select list only pass 1 value

Hello everyone,
I am struggling to make a cascading LOV select list has multi-selection.
On one report page.
I have 2 select list
The first one lists the court name (P4_COURT_NAME), the second one (P4_DEFENDANT) list all defendants who currently engaged in the court.
The problem is when I allow the defendant select list become multi-select, when it submit it only pass the first selected value.
So I create just a simple select list based one list of value, and make it allow multi-selection. When it submit, the normal select list can pass selected values properly, while the cascade LOV select list pass only the first selected value.
Please help if any of you have an idea why.
We use APEX 4.0.2.00.07, Oracle data version iis 11g
The some configuration settings I set for the P4_DEFENDANT IS
Value required: Yes
Page Action When value changed: None
Allow Multi Selection: Yes
Named LOV: --Select Named LOV-
Display Extra value : Yes
Display Null Value: Yes
Null Display Value: --Select—
Null return value:
Cascading LOV Parents Items: P4_COURT_NAME
Page Items to Submit: P4_DEFENDANT
Optimize refresh: YES
List of value definition
SELECT def.first_name || ' ' || def.surname || ' (PRN: ' || def.prn || ' )' as d, def.def_id as r
FROM defendant def INNER JOIN court_engagement ce
ON def.def_id = ce.defendant_id
WHERE (ce.date_joined_aodt_court IS NOT NULL
AND (ce.date_terminated IS NULL OR to_date(ce.date_terminated,'dd/mm/yyyy') > to_date(sysdate,'dd/mm/yyyy'))
AND UPPER(ce.court_name) LIKE UPPER(:P4_COURT_NAME)
AND ce.active = 1)Source Used: Only when current value in session state is null
Source Type: Static Assignment
Maintain session state: Per session
The rest is default.
Thanks in advance.
Ann

Hi Chintan,
The "Source used" for those items are "Always, replacing any value in the session state". To set them to "Only when current value in session state null" sounds a good solution to me.
However, a strange thing just happened - now I will not lose the values of the items after the page reloading, although I have changed nothing in the page in my application since I asked the question. I don't understand why all of a sudden the reloading doesn't make me lose changed values any more. Let me dig it tomorrow to see what I'll find.
Thanks so much for your help.
Christine

Pass parameter value from oracle reports to HTML

Hi,
Can anybody tell me if i can pass oracle reports6i parameter value to HTML.
Any ideas/suggestions would be helpful
Thanks
KAvitha

Kavitha,
I didnt quite understand your question. Do you mean you want to use the report parameter form and pass the values entered there to an html form where you will display the output based on the parameters entered by the user ?
If so, No. Not to the best of my knowledge. You can pass parameters from an html form to reports though, if this is what you are looking for.
Regards,
Al

Multiple select list not retaining the value for the first time

Hi,
I have a 3 select list depends on each other. select_list1 -- > select_list2 --> multiselect3. I have use denes example to create them.
For the first time when I select values from 1,2,3 and runs a report based on it, it works fine but *does not retain the selected value in multiselect3.
for the second time submit the process, it retails value in multiselect3. Please tell me if you came across this issue before
Here is the code.
function get_select_list_xml_VL(pThis,pSelect,pSelect1,pSelect2){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
var l_Select1 = html_GetElement(pSelect1);
var l_Select2 = html_GetElement(pSelect2);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Cascading_Select_List_VL',0);
get.add('F660_CASCADING_TEST',l_Select1.value + '_' + pThis.value + '_' + l_Select2.value);
alert(l_Select1.value + '_' + pThis.value + '_' + l_Select2.value);
// alert(document.getElementById("F660_CASCADING_TEST").value);
gReturn = get.get('XML');
if(gReturn && l_Select ){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);

Please ask any question if you dont understand about the problem.
Thanks

How does a multiple-select list box record its value?

I assumed that the value of a MSLB would be based on all the values selected, similar to SharePoint column?
I have a MSLB with 15 choices and I want to hide a section if 2 of the MSLB options are not selected. I have tried a rule on the section using
MSLB Doesn't Contain "AUD-Public Co" OR
MSLB Doesn't Contain "AUD-Public Accountable" THEN HIDE.
This doesn't work, if I change it to Is Equal To, it works but it is in reverse to what I want. If I change it to Is Not Equal To, it doesn't work at all, it stays hidden all the time.
I created a Text box to be set when the MSLB is checked and it only displays the most recent selection and doesn't clear when all items in the MSLB are cleared. I read a few other postings that were trying to concat into a textbox but this is still only
showing the last selected item.
I just want to hide the section if 2 of the MSLB are NOT checked. I am hoping I don't have write a rule using Is Equal To for every option?
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

My next question would be, if I promote this field to a column in a SP Doc Lib, how will it be displayed. We are hoping it would be the same as multi select choice field on a regular SP list so we can filter by any of the values?
Or perhaps there is a better way to accomplish this?
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Multiple Select List not returning multiple values

I have created a Multiple Select List, and the manual says that when multiple values are selected and the page is submmitted (I'm using a GO button), the multiple values are put into the ITEM field, separated with a colon . However, whenever I select multiple entries in my list, it only ever returns a value for the first item (like a single select list).
Does anybody know what I may have missed ? I'm still fairly new to this stuff, so I'm hoping it's fairly simple!
thanks.
p.s I'm using a dynamic list of values.

Andy / Scott,
Sorry, please bear with me ... still new to this.
I have a multi select list item in page 2, called P2_MULTI_LIST. When the page is submitted, I no longer physically pass it to page 3, but how would page 3 pick up the value ? Do I need to set up a P3_MULTI_LIST item in page3 and set that item to the P2_MULTI_LIST value, or do I reference P2_MULTI_LIST directly in my Page3 SQL query ?
Also, if I then want to propogate the value in P2_MULTI_LIST down to another page from page3, via a link in a report, is this possible ?
thanks
Tim

Set focus on item that selected in multiple-selection list box field in infopath

Hi
I have multiple-selection list box field in infopath that have for example 40 items. (I customize sharepoint list with infopath),then
publish infopath form in to sharepoint list. users want to add new item,when they selected or checked each item in multiple selection list box, after that automatically control focus on first item, but I want to focus remain on that item
I was selected. Why this happen?! I also set postback settings to “never” in multiple-selection list box properties. But didn’t work.
Thanks.

Hi,
According to your post, my understanding is that you wanted to find several columns based on user selection of checkboxes in one of the Multiple-selection List Box.
I recommend to customize the form to concatenate values from choice field (with multiple values) into single line text box, and then hide the fields based on the text box value.
We can follow the steps as following:
Add a text box control(filed 3) on the form to hold the value selection in the multiple selection list box.
Set the default value for the text box control as
substring-after(eval(eval(Value, 'concat(., ";")'), ".."), ";")
(you need to change the ‘Value’ in the formula to your multiple selection list box name: filed1).
Add the conditional formatting on the flied: flied 3 does not contain value (you need to change the ‘Value’ in the formula to your multiple selection list box value.).
In addition, you can add Formatting action to hide the text box control.
Here are the result screenshots for you to take a look at:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Multiple Select List Box default value ysing Fx or Code

Hello,
If anybody could help me in figuring out how to set default or customized values (checked) for a multiple select list box in infopath based on a values in a secondary data connection using the fx function or code, instead of manually typing in text in the
default value function, it would be really helpful. Have been stuck for eternity in this
I have a temp table now which has each student name and the subject separtely
something like this
Student Name Subject
AA
English
AA Maths
So that in my infopath form if I choose a student name in a drop
down box the multiple selection list box has the values of the subject chosen by the student checked

Hi,
Please check the link below and see if it can meet your requirement:
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Here is the design for your scenario:
List1 for subject name
List2 for student and subject (just as your temp table)
Then you could create cascading drop-down in InfoPath form.
Regards,
Rebecca Tu
TechNet Community Support

Multiple selection lists in abap report

I need to populate a multiple selection list and then read the selection in an ABAP report. A parameter with list box is not solving my purpose.
Please give any suggestion on this.

Hi
If you can't use the SELECT-OPTION statament, there's no standard solution.
U can only try to create a table control with only one colunm and every hit of the table control is a single hit for the selection.
To insert a table control in a selection-screen u need to use the statament:
SELECTION-SCREEN BEGIN OF TABBED (see the help)
In order to create a TAB where u can load a subscreen where u can insert a table control.
The u need to transfer the hit from table control to a range.
Max

Setting current values in Multiple Select List in SQL Query based Report

Hi,
I have a report based on a sql query that contains a multiple select list. Unfortunately I cannot get the multiple select list to display the current values (p_value) correctly. I have created a page item, :p311_current_versions, that is set using a pre-header process and it returns a value with a colon delimited format e.g. '10.1.2.1.0:10.1.2.2.0'. Then this item is used in the sql query to set the current value (p_value) of the apex_item.select_list_from_query function. However when the table is displayed, instead of having two entries, 10.1.2.1.0 and 10.1.2.2.0 selected, it has an extra entry '10.1.2.1.0:10.1.2.2.0' selected.
Here is my code:
select distinct a.product, a.version from (
select distinct
apex_item.display_and_save(2,product)||apex_item.hidden(1,env_product_id) PRODUCT,
APEX_ITEM.SELECT_LIST_FROM_QUERY(3,decode(product, 'HTTP Server' , :p311_current_versions, version), 'SELECT distinct version d, version r FROM ebs_tech_stack where
product ='''||PRODUCT||'''',
decode(PRODUCT, 'HTTP Server' ,'multiple="multiple" style="width:170px"','style="width:170px"'),
'NO') as version
from ebs_environment_tech_stack
where environment_id = :p311_umgebung_id) a order by a.product
If anyone can help me figure out how to set the current values correctly I'd be really grateful!!
Thanks in advance,
Jean

Jean,
I don't think this is possible using the apex_item package. The select_list_from_query function accepts only a single value for the second parameter.
Scott

InfoPath 2010 - Multiple Selection List Box - Rule Does Not Run When Unchecking Value

I have a multiple selection list box on a form. I have a rule that sets the value of another field. There is not condition. Just any time item is checked or unchecked the value of the other field should
change. This works when checking an item in the list box but not when unchecking the item in the list box. My question is - do rules not fire for a multiple selection list box when unchecking an item?

Hi,
I have tested in my lab environment, the rules seemed only fire for the latest checking action, and it did not fire when uncheck multiple-selection list box. Here is a workaround for your reference:
http://www.infopathdev.com/forums/p/17850/62269.aspx
However, I’d recommend you use check box instead, since it is much easier to set rule according to value of it. We can set it as true when we check the box, and set it as false when we uncheck it as below:
Then it is simple and clear to make rule according to the value of check box.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support

Select MULTIPLE default values for a multiple selection list box based on another field in Infopath 2010

Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
I visited.
I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
Add another Value Below and set the Default Value for this field to setup multiple default values.
However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
Please let me know if you need more info. Appreciate your help.
Thanks!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Value of Multiple-Selection List box is not appearing "calculated value" field of it

Hello,
We have created one selection list box using control "Multiple Selection List Box", where user can select one or more values.
We have created one view in InfoPath form, which have calculated value of fields(just showing purpose and printing purpose this view has ben created).
In this when we try to show calculated value of field is of Multiple Selection List Box, it's showing as "Off".
Could you please help us out.
Thanking you in advance.
Regards,
Jayashri

Hi,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can i display Value in Report which i select from Multiple select list

Dear All,
i am using multiple select List in form with report page.
When i create new Entry with select Multiple value in Multiple Select List then in report Value display me in below format
my SQL Query are
select NAME D, CODE R from COUNTRY_MAS WHERE ACTIVE_FLG ='Y' order by NAME
AS:AI:AG:AM these are return value .i want to display NAME in report .
How can i do this ?
Thanks
Edited by: Vedant on Apr 25, 2012 11:14 PM

Short answer, use the apex_util.string_to_table to convert to a table; then you can either iterate through the table to generate a string of names, or accomplish the same with a bulk operation.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDFEEJD
Encapsulate all this within a pl/sql function.

Multiple-Selection List Box Values in Multiple Columns

I am using InfoPath 2010 with SharePoint 2013. I have a form with a multiple-selection list box which has A LOT of choices. Instead of displaying all the choices in one column, is it possible to display the values of my list box in several
columns?

Hi Andrea,
I agree with Brij, one multiple-selection list box is associated with one list field, we cannot use the one multiple selection list box value for other multiple selection list boxes, we need to create multiple choices for each multiple-selection list box
control in InfoPath form.
Thanks
Daniel Yang
TechNet Community Support

Multiple selection list and passing that value to oracle reports

Similar Messages

Maybe you are looking for