Multiple selection of Checkboxes in ALV

Hi All
I have created an ALV Report in which Final Internal Table(Fields to be displayed) is having a Field as CheckBox.
Problem is when I'm clicking multiple checkboxes only single field of table is getting updated but I want multiple rows to be updated. I have tried by using loop also but no use.
Please check the code.
case r_ucomm.
    when '&DATA_SAVE'.
      loop at it_data into wa_data.
          read table it_fpla into wa_fpla with key vbeln = wa_data-vbeln.
          if sy-subrc = 0.
        if wa_data-check = 'X'.
           read table it_fplt into wa_fplt index rs_selfield-tabindex.
            if sy-subrc = 0.
              update fplt
                     set faksp = ' '
                 where fplnr = wa_fplt-fplnr and fkdat = wa_fplt-fkdat.
            endif.
          endif.
        endif.
      endloop.
Regards.

Hi Nikhil,
u need to use this fm to capture the changes done in the checbox 'GET_GLOBALS_FROM_SLVC_FULLSCR' and this method check_data_changed....
check this sample code
FORM user_command USING r_ucomm TYPE sy-ucomm
                    rs_selfield TYPE slis_selfield .
DATA:p_valid,
        l_repid TYPE sy-repid.
MOVE: sy-repid TO l_repid.
CASE r_ucomm .
    WHEN 'EXEC' .
      REFRESH: it_smart.
      CLEAR p_ref1.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_repid = l_repid
          e_grid = p_ref1.
      CALL METHOD p_ref1->check_changed_data
        IMPORTING
          e_valid = p_valid.
      LOOP AT it_output INTO wa_output WHERE cbox EQ 'X'.
        READ TABLE it_mard INTO wa_mard WITH KEY matnr = wa_output-matnr werks = wa_output-werks lgort = wa_output-lgort.
        IF sy-subrc EQ 0.
          wa_smart-lgpbe = wa_mard-lgpbe.
        ENDIF.
        wa_smart-matnr = wa_output-matnr.
        wa_smart-maktx = wa_output-maktx.
        READ TABLE it_meins INTO wa_meins WITH KEY matnr = wa_output-matnr.
        IF sy-subrc EQ 0.
          wa_smart-meins = wa_meins-meins.
        ENDIF.
*        wa_smart-meins = wa_output-meins.
        wa_smart-bldat = wa_output-bldat.
        wa_smart-no_cop = wa_output-menge.
        APPEND wa_smart TO it_smart.
        CLEAR: wa_smart,wa_output.
      ENDLOOP.

Similar Messages

Inserting multiple selection from checkbox in to one column of the database

Hi,
how to insert multiple selection from checkbox into one column of the database.(I select array of values from checkbox ,then how to insert tat array of values iinto single column name).
Anyone can u reply me
Thanx

hhhmmm.... is this what you mean?
lets say you hava a checkbox1 with values value1, value2, value3 and you selected all there of them? then you want then to be stored in the database in one column?
now the question is:
Is it going to be one column one row?
datafield
value1,value2,value3
Or one column multiple row?
datafield
value1
value2
value3
Which is it?

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

How to select multiple chek in checkbox in alv

how to select multiple chek in checkbox in alv

Hi,
Following report is the checkbox alv sample report.
REPORT YMS_CHECKBOXALV.
TYPE-POOLS: slis.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
DATA: s_layout TYPE slis_layout_alv.
DATA: BEGIN OF itab OCCURS 0,
icon TYPE icon-id,
vbeln TYPE vbeln,
kunnr TYPE kunnr,
erdat TYPE erdat,
box TYPE c,
END OF itab.
DATA: v_repid TYPE syrepid.
START-OF-SELECTION.
Get the data.
SELECT vbeln kunnr erdat UP TO 100 ROWS
FROM vbak
INTO CORRESPONDING FIELDS OF TABLE itab.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'No data found'.
LEAVE LIST-PROCESSING.
ENDIF.
Modify the record with red light.
itab-icon = '@0A@'.
MODIFY itab TRANSPORTING icon WHERE NOT vbeln IS initial.
v_repid = sy-repid.
Get the field catalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'ICON'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-seltext_l = 'Status'.
s_fieldcatalog-icon = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'KUNNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'ERDAT'.
APPEND s_fieldcatalog TO t_fieldcatalog.
Set the layout.
s_layout-box_fieldname = 'BOX'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
is_layout = s_layout
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = t_fieldcatalog[]
TABLES
t_outtab = itab.
FORM SET_PF_STATUS *
--> EXTAB *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'TEST2'.
ENDFORM.
FORM user_command *
--> UCOMM *
--> SELFIELD *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
Check the ucomm.
IF ucomm = 'DETAIL'.
LOOP AT itab WHERE box = 'X'.
itab-icon = '@08@'.
MODIFY itab TRANSPORTING icon.
ENDLOOP.
ENDIF.
selfield-refresh = 'X'.
ENDFORM.
Thanks,
Sankar M

How to disable multiple select option in OO ALV.?

I want to display an ALV with the multiple select button disabled.I want the "select" button at the start of each row but the "select all/deselect all" button at the right hand top corner of the display be
disabled.
Please help me out.

Hi
You can add a new column to your internal table for the selection field.
After registering the required events, for eg:
METHOD alv_set_events.
DATA: lr_events TYPE REF TO cl_salv_events_table.
lr_events = mcn_alv->get_event( ).
*- Register the event Double click
SET HANDLER me->mt_on_double_click FOR lr_events.
*- Register the event User command
SET HANDLER me->mt_on_user_command FOR lr_events.
ENDMETHOD.
you can process the selected records and mark them as "Processed" by setting a color to the record.
DATA: BEGIN OF lw_farb ,                  " Farbstruktur für ALV
        farb1(1) VALUE 'C',
        farb2(1),
        farb3(1) VALUE '0'.
DATA: END OF lw_farb.
DATA: lf_col_bearbeiten      TYPE i VALUE 5.
lw_farb-farb2 = lf_col.
ef_col = lw_farb.
Regards
Raj

Multiple Selection on Matchcode in ALV Grid

I need to implement a Matchcode with multiple selection on a Field in an ALV Grid. On F4 in this specific Field the specific matchcode muss be enable with multiple selection. And after multiple selection by the user, the result muss be concatenate and insert to this field.
Any suggestions or code?
Thanks and Best Regards
Franck

Check the program: BCALV_TEST_GRID_F4_HELP.
IN the code, search foor the fm: F4IF_FIELD_VALUE_REQUEST.
You should pass the parameter MULTIPLE_CHOICE = 'X' for multiple choice in the F4 pop up.
Once you get the returned table, you can concatenate the result and put it it the target field.
Regards,
Ravi

Select all checkbox in ALV tree

Hi There,
I have developed a report using ALV tree with 3 level nodes. I have introduced checkbox in one of the column in the node..
By this I can select the checkbox individually. I have got the requirement to select all the checkboxes simultaneously using a button. I tried several things but no help..
Please help me with this..I have used class 'cl_gui_alv_tree' for designing the Tree.

Hi,
You need to add a button to the toolbar manually, when the button is pressed loop at all the nodes that have a checkbox and update the checkbox field.
Something like....
data: go_tree1     type ref to cl_gui_alv_tree,
       go_toolbar   type ref to cl_gui_toolbar
* Add buttons to the toolbar
call method go_tree1->get_toolbar_object
    importing
      er_toolbar = go_toolbar.
check go_toolbar is not initial.
call method go_toolbar->add_button
    exporting
      fcode     = 'SELALL'
      icon      = icon_select_all
      butn_type = cntb_btype_button
      text      = ''
      quickinfo = 'Select All'.
* Define an event handler
data: go_receiver type ref to lcl_event_receiver.
class lcl_event_receiver definition.
public section.
    methods:
      function_selected for event function_selected of cl_gui_toolbar
              importing fcode.
endclass.
class lcl_event_receiver implementation.
method function_selected.
    case fcode.
      when 'SELALL'.
        perform select_all.
endmethod.
* Register the event
create object go_receiver.
set handler go_receiver->function_selected for go_toolbar.
form select_all.
data: lv_field type lvc_fname.
* Update the checkbox on each node of the ALV tree
lv_field = 'CHECK'.   "Whatever you've called the checkbox
call method go_tree1->change_item
    exporting
      i_node_key     = node_key   "<-- loop at the nodes and repeat for each one with a checkbox
      i_fieldname    = lv_field
      i_data         = ' '
    exceptions
      node_not_found = 1
      others         = 2.
call method go_tree1->frontend_update.   "call this onces all updates have been made
endform.
Regards,
Darren

Inserting multiple selection from checkbox into one column of the database

Hi,
How to insert multiple selection values from checkbox into one column of the database.
Anyone can u help me
Thanx

hi
try to use request.getParameterValues("fieldname")

Multiple selection in DISPLAY only ALV GRID

Hi,
I would like to make the rows of the ALV Grid Display only at the same time I would like to make multiple selection possible.
Multiple selection is possible by giving EDIT = 'X' at the layout level. But then if we give EDIT = ' ' at the fieldcatalogue level or no_input = 'X' at the layout level it is still in Editable mode. Kindly help me.
Thanks

Hi,
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
    IMPORTING
      et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
    CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
         EXPORTING
              textline1 = 'You must choose a valid line'.
    EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
     READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
    ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
    CALL METHOD go_grid->set_selected_rows
        exporting
          it_index_rows = gi_index_rows.
ENDIF.
Make an Exception field ( = Traffic lights)
There can be defined a column in the grid for display of traffic lights. This field is of type Char 1, and can contain the following values:
1 Red
2 Yellow
3 Green
The name of the traffic light field is supplied inh the gs_layout-excp_fname used by method set_table_for_first_display.
Example
TYPES: BEGIN OF st_sflight.
        INCLUDE STRUCTURE zsflight.
TYPES: traffic_light TYPE c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Set the exception field of the table
    LOOP AT gi_sflight INTO g_wa_sflight.
      IF g_wa_sflight-paymentsum < 100000.
        g_wa_sflight-traffic_light = '1'.
      ELSEIF g_wa_sflight-paymentsum => 100000 AND
             g_wa_sflight-paymentsum < 1000000.
        g_wa_sflight-traffic_light = '2'.
      ELSE.
        g_wa_sflight-traffic_light = '3'.
      ENDIF.
      MODIFY gi_sflight FROM g_wa_sflight.
    ENDLOOP.
Name of the exception field (Traffic light field)
    gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
Grid setup for first display
    CALL METHOD go_grid->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                              is_layout               = gs_layout
      CHANGING it_outtab                 = gi_sflight.
Color a line
The steps for coloring a line i the grid is much the same as making a traffic light.
To color a line the structure of the table must include a Char 4 field for color properties
TYPES: BEGIN OF st_sflight.
        INCLUDE STRUCTURE zsflight.
      Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Loop trough the table to set the color properties of each line. The color properties field is
Char 4 and the characters is set as follows:
Char 1 = C = This is a color property
Char 2 = 6 = Color code (1 - 7)
Char 3 = Intensified on/of = 1 = on
Char 4 = Inverse display = 0 = of
     LOOP AT gi_sflight INTO g_wa_sflight.
      IF g_wa_sflight-paymentsum < 100000.
        g_wa_sflight-line_color    = 'C610'.
      ENDIF.
      MODIFY gi_sflight FROM g_wa_sflight.
    ENDLOOP.
Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                             is_layout                = gs_layout
      CHANGING it_outtab                 = gi_sflight.
Refresh grid display
Use the grid method REFRESH_TABLE_DISPLAY
Example:
CALL METHOD go_grid->refresh_table_display.
ALV Grid Control with column and row selection
Selecting and Deselecting Rows
Use
Depending on where the ALV grid control is used, there are various methods for selecting and deselecting cells and rows:
If no pushbuttons are displayed on the left edge of the list:
You can only select one row at a time.
You can select multiple rows.
If pushbuttons are displayed on the left edge of the list:
You can select several rows or individual cells.
You can select several rows as well as several cells or individual cells.
Procedure
If no pushbuttons are displayed on the left edge of the list, you select a row by clicking an entry in the row.
If pushbuttons are displayed on the left edge of the list, you select a row by clicking the pushbutton on the relevant row.
In this case, you select the relevant cell by selecting the entry in the row.
In both cases:
To select several rows, press the Shift button and choose the cells as described above.
Adjacent rows:
Select a row, choose Shift or Control, and select the desired rows,
or
Choose Shift, and select the first and the last of the desired rows,
or
Select a row, keep the mouse button pressed, and pass over the desired rows.
Rows that are not adjacent:
Select a row, choose Control, and select the desired rows.
All rows:
You can only select all rows at once if pushbuttons are displayed on the left side of your list. To select all rows, choose .
To deselect individual rows, press the Ctrl button and click the relevant row.
Result
The selected cells have an orange background. The position of your cursor is indicated with a yellow background.

Multiple selection of rows in alv output list

experts,
using 'REUSE_ALV_GRID_DISPLAY'
the following is the sample code ,without using ctrl or shift key i am unable to select multiple rows .
any resolvable answers.
REPORT zpushbutton1.
type-pools : slis.
*structure declarations
types : begin of ty_mara,
matnr type matnr,
ernam type ernam,
mbrsh type mbrsh,
CHKBOX TYPE CHAR1,
end oF ty_mara.
types : begin of ty_marc,
matnr type matnr,
werks type werks_d,
pstat type pstat_d,
end of ty_marc.
*internal table declarations
DATA : gi_mara TYPE STANDARD TABLE OF TY_MARA INITIAL SIZE 0.
data : gi_fieldcat type slis_t_fieldcat_alv.
*workarea declarations
DATA : gs_mara TYPE TY_MARA,
gs_fieldcat type slis_fieldcat_alv.
SELECT matnr
ernam
mbrsh
FROM mara
INTO TABLE gi_mara
UP TO 10 ROWS.
perform build_fieldcat using :
'1' 'CHKBOX' 'GI_MARA' 'SELECT' 'X' ,
'2' 'MATNR' 'GI_MARA' 'MATEIRALNO' ' ',
'3' 'ERNAM' 'GI_MARA' 'PERSON CREAT' ' ',
'4' 'MBRSH' 'GI_MARA' 'INDUSTRY' ' '.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = GI_FIELDCAT
TABLES
t_outtab = GI_MARA
*& Form BUILD_FIELDCAT
form BUILD_FIELDCAT using
PCOL TYPE CHAR2
PFLDNAME TYPE CHAR10
PTABNAME TYPE CHAR10
PSELTEXT TYPE CHAR15
PINPUT TYPE CHAR1.
GS_FIELDCAT-COL_POS = PCOL.
GS_FIELDCAT-FIELDNAME = PFLDNAME.
GS_FIELDCAT-TABNAME = PTABNAME.
GS_FIELDCAT-SELTEXT_M = PSELTEXT.
GS_FIELDCAT-EDIT = PINPUT.
APPEND GS_FIELDCAT TO GI_FIELDCAT.
CLEAR GS_FIELDCAT.
endform. " BUILD_FIELDCAT
thanks and regards

experts,
can we set cursor properties during the output display
ex : i have used function module reuse_alv_grid_display to display a list of records with passing parameter
is_layout-box_fieldname and is_layout-box_tabname to list the first column as pushbutton.
when i select a row ,gets selected now when i move the
cursor (mouse) to the other row and select the row, the row previously selected will be deselected.
solution to the above problem is to hold the ctrl or shift key for
multiple selections.
is there any other alternative procedure so that without holding
ctrl or shift key multiple rows get selected.
thks and rgrds

Multiple selection of checkbox in jtable

hi
I am using jtable in which first coloumn is using checbox.Ihave used celleditor and cell renderer for that.I want to check multiple checboxes
at a time and on click of update button wanto send that information to database.But i m not able to check multiple checkboxes.As sson as i click on 2nd checkbox prwvious selection get cleared.Please help me as soon as possible.

.Ihave used celleditor and cell renderer for that.I want to check multiple checboxesThere is no need to use custom renderers or editors, they are provided by the JTable.
Read the JTable API and follow the link to the Swing tutorial on "How to Use Tables" for a working example.

Multiple selection of e_ucomm in ALV Grid toolbar

Dear SAP friends,
I have created HR report.
On the selection screen the User enters some initial data and ALV Grid get displayed.
In event Handle_toolbar the program adds a custom button to standard ALV grid toolbar named "ABSENCE/ATTENDANCE".
In event handle_menu_button the program adds functions to this button.
Then in event handle_user_command depending on the function selected "e_ucomm" the program repopulates the ALV Grid.
METHOD handle_toolbar.
* Append a separator to standard toolbar
    CLEAR gs_toolbar.
    gs_toolbar-butn_type = 3.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    gs_toolbar-function = 'ABSENCE/ATTENDANCE'.
    gs_toolbar-icon      = icon_position_hr.
    gs_toolbar-quickinfo = 'Absence/Attendance Type'.
    gs_toolbar-butn_type = 2.               " 2-Menu type, 0-single button type
    gs_toolbar-disabled = space.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.                    "handle_toolbar
METHOD handle_menu_button.
* Handle own menubuttons
    IF e_ucomm = 'ABSENCE/ATTENDANCE'.
     LOOP AT it_aa INTO it_aa_ln.
       MOVE it_aa_ln-type TO w-fcode.
      CONCATENATE   it_aa_ln-type '=' it_aa_ln-text
        INTO w-text
          SEPARATED BY SPACE.
      CALL METHOD e_object->add_function
        EXPORTING
          fcode = w-fcode
          text = w-text.
     ENDLOOP.
    ENDIF.
ENDMETHOD.                    "handle_menu_button
METHOD handle_user_command.
    MOVE e_ucomm TO w-abstype.
    PERFORM abs_att USING w-abstype.
ENDMETHOD.                    "handle_user_command
Is there a way to select more than one line or e_ucomm in other words at a time?
I would like to give my user a choice of let's say one report with three types of absences at a time rather than three reports with one type each.
Thanks,
Tatyana

The whole point of a toolbar button is to do a specific function.
What I would actually do here is in your menu button add another option say "User Choice" and when this is clicked throw up another screen say another ALV grid where the user can choose the various combinations or do it via a POPUP. A second grid IMO would be the best way to do it as the user can select easily specific rows.
You can either display the 2nd grid in a 2nd custom container on your main screen where you are showing the ALV grid or pass control to a new screen / program. Using a 2nd container is better as you still will have your instance of the original grid available.
Cheers
Jimbo

Get Selections From ALV on Multiple Selection Mode

Hi,
How can i get values of selected rows from ALV that has selection '0..n' (multiple selection) ?
Can somebody help me pls?
Thanks.

Hi Nurullah,
Steps to make multiple rows selectable in ALV:
1) Create the selection property of the node that you are binding to the DATA node as o..n
2) Un-check the, "Initialization Lead Selection" checkbox for the node which you are using to bind to the DATA node
3) In the WDDOINIT method specify the ALV's selection mode as MULTI_NO_LEAD. It is important that you set the selection mode to MULTI_NO_LEAD or else in the end you would be capturing 1 row lesser than the total number of rows the user has selected. This is because 1 of the rows would have the LeadSelection property & our logic wouldnt be reading the data for that row. Check the example code fragment as shown below:
DATA lo_value TYPE REF TO cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model( ).
CALL METHOD lo_value->if_salv_wd_table_settings~set_selection_mode
    EXPORTING
      value = cl_wd_table=>e_selection_mode-MULTI_NO_LEAD.
Steps to get the multiple rows selected by the user
In order to get the multiple rows which were selected by the user you will just have to call the get_selected_elements method of if_wd_context_node. So as you can see its no different from how you would get the multiple rows selected by the user in a table ui element. First get the reference of the node which you have used to bind to the ALV & then call this method on it. Check the example code fragment below:
METHOD get_selected_rows .
DATA: temp TYPE string.
DATA: lr_node TYPE REF TO if_wd_context_node,
            wa_temp TYPE REF TO if_wd_context_element,
            ls_node1 TYPE wd_this->element_node_flighttab,
            lt_node1 TYPE wd_this->elements_node_flighttab.
lr_node = wd_context->get_child_node( name = 'NODE_FLIGHTTAB' ).
" This would now contain the references of all the selected rows
lt_temp = lr_node->get_selected_elements( ).
    LOOP AT lt_temp INTO wa_temp.
" Use the references to get the exact row data
      CALL METHOD wa_temp->get_static_attributes
        IMPORTING
          static_attributes = ls_node1.
      APPEND ls_node1 TO lt_node1.
      CLEAR ls_node1.
    ENDLOOP.
ENDMETHOD.
Hope this helps resolve your problem.
Regards,
Uday

ALV REPORT MULTIPLE SELECTION

CAN ANYONE PLZ TEMME HOW TO SELECT MULTIPLE RECORDS IN ALV AND EDIT THEM...........................
EG....SELECT MULTIPLE VALUES AND CHANGE D ACTIVE INDICATOR.........
THANX IN ADVANCE...........

Hi,
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV? http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV? http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV? http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://www.sap-img.com/abap/what-is-alv-programming.htm
http://www.sap-img.com/abap-function.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
http://www.sap-img.com/abap-function.htm

Handling Multiple checkboxes iin ALV list??

Hi,
I have a requirement of generating a list with multiple checkboxes corresponding to each line/row of the list..Based on the selection of some/all the rows of the list I have to invoke some functionality on the click of some button..
I am able to get the chk-boxes on the list also i have got the button on the std PF-status of ALV list, but I am not able to handle multiple selection of the chk-boxes??
plz help..

On the field catalog definition for the amount field pass CFIELDNAME as the <currency> fieldname. if this is maintained, i would assume it will solve your issue.
Say for example, the amount field is AMOUNT and the corresponding currency fieldname is 'CURRENCY', the field catalog for this field should be filled in something like this.
t_fieldcat-fieldname = 'AMOUNT'.         "amount field name
t_fieldcat-tabname = 'IT_FINAL'.           "internal table name
t_fieldcat-cfieldname = 'CURRENCY'.   "currency field name which will be referred
append t_fieldcat.
Hope this helps.
Thanks,
Balaji

Multiple selection of Checkboxes in ALV

Similar Messages

Maybe you are looking for