Multiple selection ranges reversed when I append on storyline

When I append multiple selection ranges in a clip to the storyline, the order is reversed on the storyline. I've found others with similar issues and no solution aside from deleting FCP preferences in the library and/or reinstalling, both of which i've done to no avail. It is excruciating and doesn't seem to make much sense as to why a shortcut would have been created only to force me to rearrange the clips on the storyline and waste the time that's supposed to be saved. I've also tried it on another computer, and the same issue. Supposedly the clips are arranged in the order of the selections but they are always placed in the reverse order in which I select them. I am trying my best to become accusomted to FCPX after switching to Premiere CS6 by default upon FCPX's release but so far seems to be a waste of a purchase....
Anthony

Thank you for your response and attempt to reproduce this issue, i've since pinpointed that I only have the issue when I attempt to append multiple selections I have made in list view in the event browser. Whenever I append these multiple selections in list view, they will always be in the reverse order that my selections were made, but discovered these workarounds:
1) after making the multiple selections in list view, switch views to filmstrip view and then append
2) once the selections are made in list view, press F to rate them, and then select the subclips and append them to the storyline
That is the only way I can get them to appear in the order I intended. I have found users to be polarized on this issue, having found only a few editors on other forums with this issue and finding most who seem like my issue is a freak occurance (even got the great Larry Jordan to respond on his forum and not being able to replicate the issue). So i'm hoping an upgrade will fix the problem in the near future. I've tried deleting preference files however did not uninstall and reinstall on one of my machines since I already tried doing so on another machine to no avail...
Thanks anyways for the response!
Ant

Similar Messages

Multiple selection causing issue when sorted

I have an issue when using multiple selection along with sortable column. If certain rows are selected and then a column is sorted, selected rows remains as it is but data changes. Moreover sorting happens within the rows in the page and not across the table. Please provide me solution. Thank you
<af:table value="#{bindings.CntTypecntItem.collectionModel}"
var="row"
rows="#{bindings.CntTypecntItem.rangeSize}"
first="#{bindings.CntTypecntItem.rangeStart}"
emptyText="#{bindings.CntTypecntItem.viewable ? 'No rows yet.' : 'Access Denied.'}"
width="860" id="tblSearchIcLcResults"
binding="#{SearchNAssign.tblSearchIcLcResults}">
<f:facet name="selection">
<af:tableSelectMany required="false"/>
</f:facet>
<af:column sortProperty="ctry"
sortable="true"
headerText="Country">
<af:outputText value="#{bindings.countryName.inputValue}"/>
</af:column>

Hi,
if you are on a POJO business service, make sure the primary key attribute is set for the PK attribute in the generated data control XML file. So if your entity is "Employees" then select "Employees.xml", open the Structure Window (ctrl-shift-s) and select the attribute that is the PK. In the property inspector,set he PrimaryKey property to true
Frank

Checked some items of multiple-selection list box when form loaded in infopath

Hi
I customize sharepoint list with infopath. I have multiple-selection list box and want to checked some items of that automatically when form loaded. how can do this?
Thanks.

Hi,
According to your description, my understanding is that you want to pre-select some items in the Multiple-Selection List Box.
I recommend to follow the steps below to achieve this goal:
Click Default Values under Data tab in InfoPath, expand the dataFields and navigate to the Multiple-Selection List Box field.
Set the Default Value of the Multiple-Selection List Box field.
Right click the field under the Multiple-Selection List Box group, then select Add another Value Below and set the Default Value for this field.
Repeat step3 based on the number of the items that you want to be pre-selected.
More information are provided in the link below:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Best regards.
Thanks
Victoria Xia
TechNet Community Support

InfoPath 2010 - Multiple Selection List Box - Rule Does Not Run When Unchecking Value

I have a multiple selection list box on a form. I have a rule that sets the value of another field. There is not condition. Just any time item is checked or unchecked the value of the other field should
change. This works when checking an item in the list box but not when unchecking the item in the list box. My question is - do rules not fire for a multiple selection list box when unchecking an item?

Hi,
I have tested in my lab environment, the rules seemed only fire for the latest checking action, and it did not fire when uncheck multiple-selection list box. Here is a workaround for your reference:
http://www.infopathdev.com/forums/p/17850/62269.aspx
However, I’d recommend you use check box instead, since it is much easier to set rule according to value of it. We can set it as true when we check the box, and set it as false when we uncheck it as below:
Then it is simple and clear to make rule according to the value of check box.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support

Multiple Account Ranges - Row Expand

When assigning accounts to row sets, you must identify the display type. The choices are T = Total, E = Expand and B = Both (Expand & Total).
My question deals with multiple account ranges. When I enter multiple account ranges, I don't get the desired results - expanded (detail) and one total. The excerpt below says you must use T if you assingn "multiple account ranges to a row and you want to total them".
How do I get the detail for multiple account ranges and one total??
Excerpt from User Guide:
Additional Information: To specify just one account rather than a range, enter the same account as the Low and High.
If you leave a segment blank, FSG will process all values for that segment.
4. Enter a Display type for each account segment.
Note: You must use a display type of T (Total) for each segment if you assign:
' Accounts to a column.
' Multiple account ranges to a row and you want to total them. See Display Types.
B: (Both) Expand and total the range and display all segment values and a total balance for the segment values. This option lets you display both detail rows and total rows. If you enter a parent segment value for your range, FSG totals all of the child values for that parent. Do not select summary reporting to display all the child values in your report.
null

Thanks for your question.
The best solution for this issue is 1) to define separate row lines for each of your account ranges and use the display type of "E" for each row line and 2) to define another row line which is the total of the rows which you expanded on above. This row can either be a calculation of the rows above or an account assignment using the same multiple account ranges above with the display type of "T".
Please let me know if you have any questions with this.
Thanks.

Multipl selection not working in Select Options, NO-EXTENSION not specified

Hi,
My code for the selection screen is as given below:
data: v_bukrs type ekko-bukrs.
select-options: s_one    for v_bukrs default '1234',
                s_two    for ekko-lifnr,
                s_three for ekko-ekgrp.
select-options: s_last   for ekko-llief no intervals.
However, when I execute my program, all for select-options show Multiple selection icon. When I click on the icon for multiple selection, it is not processed.
I tried to debug and find out but to no avail. Also I have searched extensively over SDN, but have not found any solution for my problem.
Kindly help with relevant solution.
Regards,
Smruthi

Hi Anurag and Vinod,
Thanks for your replies.
The FM - SELECT_OPTIONS_RESTRICT has not been used in my program.
The issue is however, resolved. There was an error in the selection screen events, that was triggering the disabling.
Regards,
Smruthi

Multiple selections in an HTML form

The option selector (<select>...</select>) in an HTML form allows the
user to make multiple selections. However, when the form parameters
are posted to an XSQL page, only the first value selected will be
assigned to the corresponding XSQL parameter.
This is very unfortunate, because I would like the selected values to
be used in a query like this:
<xsql:query>
select ...
from ...
where ...
and elem in ({@list})
and ...
</xsql:query>
where 'list' is the name of the option selector. However, since only
the first value selected is substituted, the query does not work.
The <xsql:include-request-params/> will "rowify" the values selected,
but this can only be utilized by a style sheet associated with the
XSQL page.
Does anyone know how to get access to all the selected values in the
XSQL page?
HELP!

Hi,
Here is an approach that may work for you.
In the registration process, assign each individual a userid... e.g. bob123.
When they log into your site, create a SESSION variable, SESSION.userid = bob123.
In your db, for every player have two fields, one is the userid of the person that is attached to that player, and another field for the jersey number. You could also have a field for assigned/unassigned.
Populate the grid with the unassigned players. Have the empty jersey number field on the grid and make it editable. When an individual assigns a jersey number to the person, (you can have them update after each person selected or at the end), you can let a cfc update the db and using their SESSION.userid, they become the "owner" of that player. The update also will update the db with their jersey number. The update can also turn them from unassigned to assigned so noone else can "claim" them.
Now anytime the user logs in, they'll have their players, easy to get to using a WHERE sql statement = WHERE SESSION.userid = bob123.
cfwild

PARM error (shows as mrap) with multiple selections, no error with single selection

Hello all,
I am new to Illustrator scripting this is my first script. I am getting a this error " Error 1200: an Illustrator error occurred: 1346458189 ('MRAP'): line 50" which is the line:
var next_board = doc.artboards.add([next_board_L, next_board_T, next_board_R, next_board_B]);
It only occurs when I have multiple selections and never when I have only one selection. After a little research I have found the error is actually PARM, but I don't see any uninstantiated variables or other issues that could be throwing this error. I am on a mac Illustrator CC. I would appreciate any help on the matter. Below is the full script.
#target Illustrator
// This script was made to take all selected objects
// Create a new arboard for all Selected objects
// At a user specified width and height then
// Scale the object to the artboard size and center
var doc = app.activeDocument;
var select = doc.selection;
if (select.length > 0) {
     var title = "Fit Selected Object(s) to Artboard(s)";
     var msg = "Enter the width and height of artboards (single number)";
     var board = Number(Window.prompt (msg, 0, title));
     for(var i = 0; i < select.length; i++) {
          var selectW = select[i].width;
          var selectH = select[i].height;
          if(selectH >= selectW) {
               if(board > selectH) {
                    scale = board/selectH*100;
          } else {
               scale = board/selectW*100;
          var boardIdx = doc.artboards.getActiveArtboardIndex();
          var boardSrc = doc.artboards[boardIdx];
          var boardSrc_L = boardSrc.artboardRect[0];
          var boardSrc_T = boardSrc.artboardRect[1];
          var boardSrc_R = board;
          var boardSrc_B = -board;
          var moveX = 10;
          var next_board_L = boardSrc_R + moveX;
          var next_board_T = boardSrc_T;
          var next_board_R = next_board_L + (boardSrc_R - boardSrc_L);
          var next_board_B = boardSrc_B;
          var next_board = doc.artboards.add([next_board_L, next_board_T, next_board_R, next_board_B]);
          select[i].resize(
              scale, //this is a percentage of current width
              scale, //this is a percentage of current height
              true, // changePositions
              true, // changeFillPatterns
              true, // changeFillGradients
              true, // changeStrokePattern
          var selPosX = select[i].left;
          var selPosY = select[i].top;
          var selBoardDiffX = next_board_L - selPosX;
          var selBoardDiffY = next_board_T - selPosY;
          var toCenter = 0;
         select[i].translate (
                   selBoardDiffX,
                   selBoardDiffY,
                   true,
                   true,
                   true,
                   true
         var boardH = next_board.artboardRect[2] - next_board.artboardRect[0];
          var boardW = next_board.artboardRect[3] - next_board.artboardRect[1];
         if( boardH > select[i].height ) {
              toCenter = (boardH-select[i].height)/2;
                  select[i].translate (
                            0,
                            -toCenter,
                            true,
                            true,
                            true,
                            true
         var NegSelectW = select[i].width * -1; //Must be a negative number
         if ( boardW < NegSelectW ) {
              toCenter = (boardW+select[i].width)/2;
                  select[i].translate (
                            -toCenter,
                            0,
                            true,
                            true,
                            true,
                            true

Ah I finally understand. I looked into that post a little more an started experimenting. I used the function posted to create my artboards. Its a lot easier if you can think
(x, y, width, height). So yes the issue was with my variable but not in the way I was thinking.
for those who need it here is the function posted in that thread
var newRect = function(x, y, width, height) {
    var l = 0;
    var t = 1;
    var r = 2;
    var b = 3;
    var rect = [];
    rect[l] = x;
    rect[t] = -y;
    rect[r] = width + x;
    rect[b] = -(height - rect[t]);
    return rect;

How to disable the SELECT-OPTINS multiple selection screen's Ranges options

Hi this is sekhar,
                  I have used the Select-options: statement with 'No-Interval' option. Now I need to restrict the user not to enter the values in the Ranges column of multiple selection screen. How can I do it....

You can also refer this code as below : CHECK OUT SELECT OPTION sel_1_0.
*& Report ZTESTREP
REPORT ztestrep.
Include type pool SSCR
TYPE-POOLS sscr.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA opt_list TYPE sscr_opt_list.
DATA ***      TYPE sscr_***.
Define the selection screen objects
First block: 3 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK block_0 WITH FRAME TITLE text-bl0.
SELECT-OPTIONS sel_0_0 FOR sy-tvar0.
SELECT-OPTIONS sel_0_1 FOR sy-tvar1.
SELECT-OPTIONS sel_0_2 FOR sy-tvar2.
SELECT-OPTIONS sel_0_3 FOR sy-tvar3.
SELECTION-SCREEN END   OF BLOCK block_0.
Second block: 2 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK block_1 WITH FRAME TITLE text-bl1.
SELECT-OPTIONS sel_1_0 FOR sy-subrc.
SELECT-OPTIONS sel_1_1 FOR sy-repid.
SELECTION-SCREEN END   OF BLOCK block_1.
INITIALIZATION.
Define the option list
ALL: All options allowed
MOVE 'ALL'        TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
NOPATTERN: CP and NP not allowed
CLEAR opt_list.
MOVE 'NOPATTERN' TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne.
APPEND opt_list TO restrict-opt_list_tab.
NOINTERVLS: BT and NB not allowed
CLEAR opt_list.
MOVE 'NOINTERVLS' TO opt_list-name.
MOVE 'X' TO: opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
EQ_AND_CP: only EQ and CP allowed
CLEAR opt_list.
MOVE 'EQ_AND_CP' TO opt_list-name.
MOVE 'X' TO: opt_list-options-cp,
               opt_list-options-eq.
APPEND opt_list TO restrict-opt_list_tab.
JUST_EQ: Only EQ allowed
CLEAR opt_list.
MOVE 'JUST_EQ' TO opt_list-name.
MOVE 'X' TO opt_list-options-eq.
APPEND opt_list TO restrict-opt_list_tab.
Assign selection screen objects to option list and sign
KIND = 'A': applies to all SELECT-OPTIONS
MOVE: 'A'          TO ***-kind,
        '*'          TO ***-sg_main,
        'NOPATTERN' TO ***-op_main,
        'NOINTERVLS' TO ***-op_addy.
APPEND *** TO restrict-***_tab.
KIND = 'B': applies to all SELECT-OPTIONS in block BLOCK_0,
            that is, SEL_0_0, SEL_0_1, SEL_0_2
CLEAR ***.
MOVE: 'B'          TO ***-kind,
        'BLOCK_0'    TO ***-name,
        'I'          TO ***-sg_main,
        '*'          TO ***-sg_addy,
        'NOINTERVLS' TO ***-op_main.
APPEND *** TO restrict-***_tab.
KIND = 'S': applies to SELECT-OPTION SEL-0-2
CLEAR ***.
MOVE: 'S'          TO ***-kind,
        'SEL_0_2'    TO ***-name,
        'I'          TO ***-sg_main,
        '*'          TO ***-sg_addy,
        'EQ_AND_CP' TO ***-op_main,
        'ALL'        TO ***-op_addy.
APPEND *** TO restrict-***_tab.
KIND = 'S': Applies to SELECT-OPTION SEL_0_3
CLEAR ***.
MOVE: 'S'        TO ***-kind,
        'SEL_0_3' TO ***-name,
        'I'        TO ***-sg_main,
        'N'        TO ***-sg_addy,
        'JUST_EQ' TO ***-op_main.
APPEND *** TO restrict-***_tab.
Call function module
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
             restriction                = restrict
          DB                          = ' '
       EXCEPTIONS
             too_late                   = 1
             repeated                   = 2
             not_during_submit          = 3
            db_call_after_report_call = 4
            selopt_without_options     = 5
             selopt_without_signs       = 6
             invalid_sign               = 7
            report_call_after_db_error = 8
              empty_option_list          = 9
             invalid_kind               = 10
             repeated_kind_a            = 11
             OTHERS                     = 12.

Hide RANGE option in Multiple Selection Popup window

This is regarding Parameter option.
In parameter variable,i declared NO INTERVALS option
to get only multiple values.
In multiple selection popup window.i want to select only multiple values not RANGE values. so i want to either disable or hide the f7 option.how to do this.
(we have ranges option at Popup window
when u click f7 or complex selection icon at bottom popup window.)
do we have any option to hide this.
Ambichan

hi,
look fm SELECT_OPTIONS_RESTRICT
(here's a docu)
regards Andreas

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

No Data when doing multiple selection of sub-brand in the cube

Hey everyone.
I am having a very strange situation.
No Data when doing multiple selection cube.
The thing is that the situation is created only in the transition between the servers, who have a different Build but both of them are SQL 2008R2 servers.
The Build of one of them is 10.50.2789.0 and the other one is 10.50.4000.0 (SP2).
The other properties of the cube are the same, it's Not possible to retrieve data from the cube on the server with the "SP2 when we the slicing is at the level of sub-brand and removed even one item mean we passed a multiple selection ,
This is possible only if we connect the cube as Admin .
While the server with the older "Build" the problem to perform the above operation when connected as a user not exist.
What can cause this problem,and how can we fix it?
thank's a lot.

Hi Doron2Bull,
According to your description, there are two servers in your scenario, and you cannot retrieve data from one of the cube, right? Are there any differences between the two cubes on different? You can import the database on the server into BIDS and explore
Data on the fact table on the Data Source View to check if there are any data. If we can see the data when we do Explore Data on the fact table on the Data Source View (DSV), but when we browse the cube here is no data. Then there are many possibilities for
this issue.
On the cube's Dimension Usage, the relationship between this measure group and the dimension is not correctly defined.
On the relational database, the dimensional key column on the fact table does not correspond to the key column on dimension table.
There is a Default Member on another dimension, and there is no fact table row that satisfy this condition.
If I have anything misunderstood, please point it out.
Regards,
Charlie Liao
TechNet Community Support

Hide the Range Option in Multiple Selection screen

Hai,
I Give the values In single Values In Selection Option Screen.
I want to need Hide the Range Option Include or Exclude In Multiple selection screen.
Regards,
Geetha

just check this it may help you
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822</a>
here restricting the selection screen
regards
shiba dutta

ABAP Dump when executing tcode CATS_APPR_LITE for multiple selection.

Dear Members,
Issue:
When executing tcode CATS_APPR_LITE for Time Approval from the remote R/3 by selecting multiple selections and click on Approve, if you get a dump saying CALL_FUNCTION_REMOTE_ERROR
Analysis:
If there is an SAP Note applied in 1368487 and at CALL FUNCTION CATS_CHECK _PTEXDIR FM getting the dump because in source system for this function module Remote Enabled Module option is not checked.
To resolve this correction note 1430042 has to be applied.
Regards
Durga

Dear Members,
Issue:
When executing tcode CATS_APPR_LITE for Time Approval from the remote R/3 by selecting multiple selections and click on Approve, if you get a dump saying CALL_FUNCTION_REMOTE_ERROR
Analysis:
If there is an SAP Note applied in 1368487 and at CALL FUNCTION CATS_CHECK _PTEXDIR FM getting the dump because in source system for this function module Remote Enabled Module option is not checked.
To resolve this correction note 1430042 has to be applied.
Regards
Durga

Ranges input using multiple selection in select-options

Hello,
I have declared a single selection field with multiple selection as follows:
SELECT-OPTIONS:
S_PONUM FOR EKKO-EBELN NO INTERVALS,
If a range is entered using multiple selection, no value appears in the selection field on screen, however, the ranges tab in multiple selection shows the range. Is there a way to programatically test if a range has been entered using multiple selection? Help is appreciated.
Regards

Hi,
If you not displaying the intervals then user can enter only one value then option field will be with 'EQ' sign.
LOOP AT S_PONUM.
IF S_PONUM-OPTION NE 'EQ'
" Then Values are entered using the multple selections
ENDIF.
ENDLOOP.

Multiple selection ranges reversed when I append on storyline

Similar Messages

Maybe you are looking for