Multiple selection screens for report

I need to display 2 separate selection screens prior to executing the report.
1. A selection screen to enter the material & plant
2. Based on the material and plan another selection screen to display the inspection characteristics associated with the material and be able to select (as checkbox) the inspection characteristic that needs to be used as filtering criteria.
The first selection screen I can do. But how do I invoke the second selection screen that displays the insp. char. Also how do I design such a selection screen and populate the contents
I would like something like
[CheckBox] Inspection Plan Inspection Characteristic [Editable upper limit] [Ediatable Lower Limit]
But other ideas to implement this are welcome as well.

Megan,
Say thanks to SDN.No need to give points to this.
TABLES:EBAN.
SELECTION-SCREEN BEGIN OF SCREEN 100 TITLE title.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER:rad1 RADIOBUTTON GROUP rad USER-COMMAND frad1 DEFAULT 'X',
          rad2 RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETER: mtr AS CHECKBOX MODIF ID g3 USER-COMMAND chk1,
           p_matnr TYPE eban-matnr MODIF ID g1,
           sloc AS CHECKBOX MODIF ID g3 USER-COMMAND chk2,
           str_loc TYPE eban-lgort MODIF ID g4.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: matnr1 FOR eban-matnr MODIF ID g2.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN PUSHBUTTON /20(10) name USER-COMMAND UCOM.
SELECTION-SCREEN END OF SCREEN 100.
*name = 'FETCH'.
title = 'Test Report'.
CALL SELECTION-SCREEN '100'.
TYPE-POOLS slis.
AT SELECTION-SCREEN OUTPUT.
IF rad1 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1' OR screen-group1 = 'G4'.
        screen-active = '1'.
        screen-input = 0.
      ELSEIF screen-group1 = 'G2'.
        screen-active = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF rad2 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1' OR screen-group1 = 'G4' OR screen-group1 = 'G3' OR screen-group1 = 'G5'.
        screen-active = '0'.
      ELSEIF screen-group1 = 'G2'.
        screen-active = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF mtr = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1'.
        screen-input = 1 .
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF sloc = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G4'.
        screen-input = 1 .
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
clear sy-ucomm.
iflag = 1.
K.Kiran.

Similar Messages

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

Set default value to selection screen for report

Hi All,
   I've a report selection screen which has 3 fields from the report category: PNPPERNR, PNPSTAT1, PNPBTRTL. My logical database is PNPCE.
   How can I set the default value to the field PNPSTAT1? Means when I first display the selection screen, the value for this field will automatically display '3' in it.
   Hope someone can help me on this.
Thanks.

Hi All,
   Thanks for reply. But I think I should declare my question clearer.
   Actually it's not a parameter.
My problem is when using the logical database, if you define a TABLES: PERNR, then you can see the SAP standard report selection screen. So my selection screen has 3 standard fields which are PNPPERNR, PNPSTAT1, and PNPBTRTL.
   I need to set the default value '3' to field PNPSTAT1.
Thanks.

How to create Multiple Selection Screen in ALV

Hi,
Can anybody tell me how to create the Multiple Selection screen in ALV reports.
Plse give me code sample if possible.
Thanks in advance
KP

Hi Rich,
thanks for the reply.
I am creating a report. in that for one field, i need to create a multiple selection screen. i mean in the output screen , i need to get the multiple selection screen for that field. in that i should be able to select multiple values, or single values or range of values.
eg: if i take the field kunnr, i should be able to select the multiple kunnar values in the output screen.
Hope my problem is understood.
Thanks
KP

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

Selection screen for EEA report

Hi guys
Q1 - I need help on understanding what should be inputs filled in selection screens fields of EEA report (WEIMS) for Canada :
LEAVE Definition section - what does this field mean on selection screen - should we be entering Leave of absence action here or Separation / termination actions?
Q2 - in my system there are aproximately 200 terminations in system for reporting period 2013, but not sure why term report of WEIMS is pulling only 10 .. and most of those PERNRs dont appear in error log either.
Thanks

Employee File
If the data of an employee is correct (as per data elements below) , the PERNR , his IT0077 , IT0008 salary, NOC code etc are picked up in Employee file including Full time, part time and temporary employees:
IT0001 has Work contract field maintained.
IT0016 Contract type Infotype is maintained.
IT0077 infotype is maintained with correct CMA code.
All Permanent and Full-time employees on LOA will appear in Employee file.
Term FileEmployees having work contract as Temporary will qualify to appear in this file, if following data criteria are met:
IT0001 –work contract= Temporary
IT0016- Contract Type = Fixed term with end date
IT0077 infotype is maintained with correct CMA code.
This file is NOT providing us information about employees who got terminated in reporting year , instead this pulls up Contract start and end date for Fixed term contract Temporary employees.
All Temporary employees on LOA will appear in Term file.
Promo fileIF any employee has had Org change with reason as Promotion ( what we define in Selection screen) in reporting period , this file will pull up data of the employee with promotion date, irrespective of Employee type (permanent / temp etc) and employment status ( active / inactive/ withdrawn) if following data paramenters are maintained appropriately:
IT0001 – work contract is filled
IT0016 – Contract type is maintained
IT0077 maintained with correct CMA code.
Error file Will have all employees having incorrect / missing data for selection screen.

Skipping Selection Screen for a report program

Hi guys,
I have a report program that works in 2 modes - Create and modify ( There is a toggle button in the ALV report). Its an editable ALV grid. There are 2 tcodes - zcreate and zmodify to access the same report in 2 above modes. For zmodify, i have a selection screen. How do i skip the selection screen for zcreate ?
Here is my report program
REPORT ZSWR_RCKDVOLS .
INCLUDE ZSWR_RCKDVOLS_TOP.
INCLUDE ZSWR_RCKDVOLS_CLDEF.
INCLUDE ZSWR_RCKDVOLS_CLIMP.
INCLUDE ZSWR_RCKDVOLS_SELSCR. " Selection Options are written in this.
INCLUDE ZSWR_RCKDVOLS_PBO.
INCLUDE ZSWR_RCKDVOLS_PAI.
INCLUDE ZSWR_RCKDVOLS_FORM.
INITIALIZATION
initialization.
perform layout_build.
AT SELECTION-SCREEN
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
                      into lv_plnt
                      where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
END-OF-SELECTION.
CHECK: NOT gi_zswt_rckdvols[] IS INITIAL.
set SCREEN 100.        "Main Screen
A sample code will be greatly helpful.
Thanks,
SHK

So if we were to implement this in your program.....
report zswr_rckdvols .
include zswr_rckdvols_top.
include zswr_rckdvols_cldef.
include zswr_rckdvols_climp.
<b> include zswr_rckdvols_selscr. " Selection Options are written in this ".
* Add this line into your selection screen include.
parameters: p_switch type c no-display.</b>
include zswr_rckdvols_pbo.
include zswr_rckdvols_pai.
include zswr_rckdvols_form.
* INITIALIZATION
initialization.
perform layout_build.
* AT SELECTION-SCREEN
<b>at selection-screen output.
if sy-tcode = 'ZCREATE'
    and p_switch = space.
    submit zswr_rckdvols
           with p_switch = 'X'
                 and return.
    leave program.
endif.</b>
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
into lv_plnt
where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
* START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
end-of-selection.
check: not gi_zswt_rckdvols[] is initial.
set screen 100. "Main Screen
Regards,
Rich Heilman

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

RAR5.3 not able to cut and paste list of users to Multiple Selection screen

CC V4.0 on ABAP system has a feature where you can cut and paste a list of many users from the clipboard to Single Values column in the Multiple Selection screen, so you can run SOD Analysis Report for all those users. The Multiply Selection screen is a standard SAP supplied pop up screen.
With RAR 5.3 the Multiply Selection screen design is different. There is no longer feature to cut and paste from clipboard. We have to input each user one at a time. So if you have many users (20, 30, etc.) it is a time consuming task. It is not acceptable to our business power users.
We can import the list of users to a Custom User Group (in the Configuration Tab). First of all, there is no mass delete on Custom User Group. You have to delete each user one at a time which is time consuming. The alternative is to create a new Custom User Group each time, then it becomes a maintenance nightmare. Secondly, it is in the Configuration Tab which is only available to Administrators (fear of users changing configuation data), so the Administrator (or whomever has access to the Configuration Tab) has to maintain the Custom User Groups which is a lot of work for him or her or them.
We talk to SAP every week. But they are looking at this as a long time project. Does any one of you (or your company) has the same requirements? How do you get around it? Did you setup some other procedures so users can cut and paste the users list and run the Risk Analysis report themselves?
Thanks,
John.

This is probably a JVM issue. Are you using JInitiator or the IE native JVM?
I suggest you turn on the JVM console, set the trace level to maximum, and then watch what happens when you attempt the copy.
Also, check the key mapping (usually ctrl-k) that the forms applet is implementing. Perhaps ctrl-c means something else...

How to disable the SELECT-OPTINS multiple selection screen's Ranges options

Hi this is sekhar,
                  I have used the Select-options: statement with 'No-Interval' option. Now I need to restrict the user not to enter the values in the Ranges column of multiple selection screen. How can I do it....

You can also refer this code as below : CHECK OUT SELECT OPTION sel_1_0.
*& Report ZTESTREP
REPORT ztestrep.
Include type pool SSCR
TYPE-POOLS sscr.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA opt_list TYPE sscr_opt_list.
DATA ***      TYPE sscr_***.
Define the selection screen objects
First block: 3 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK block_0 WITH FRAME TITLE text-bl0.
SELECT-OPTIONS sel_0_0 FOR sy-tvar0.
SELECT-OPTIONS sel_0_1 FOR sy-tvar1.
SELECT-OPTIONS sel_0_2 FOR sy-tvar2.
SELECT-OPTIONS sel_0_3 FOR sy-tvar3.
SELECTION-SCREEN END   OF BLOCK block_0.
Second block: 2 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK block_1 WITH FRAME TITLE text-bl1.
SELECT-OPTIONS sel_1_0 FOR sy-subrc.
SELECT-OPTIONS sel_1_1 FOR sy-repid.
SELECTION-SCREEN END   OF BLOCK block_1.
INITIALIZATION.
Define the option list
ALL: All options allowed
MOVE 'ALL'        TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
NOPATTERN: CP and NP not allowed
CLEAR opt_list.
MOVE 'NOPATTERN' TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne.
APPEND opt_list TO restrict-opt_list_tab.
NOINTERVLS: BT and NB not allowed
CLEAR opt_list.
MOVE 'NOINTERVLS' TO opt_list-name.
MOVE 'X' TO: opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
EQ_AND_CP: only EQ and CP allowed
CLEAR opt_list.
MOVE 'EQ_AND_CP' TO opt_list-name.
MOVE 'X' TO: opt_list-options-cp,
               opt_list-options-eq.
APPEND opt_list TO restrict-opt_list_tab.
JUST_EQ: Only EQ allowed
CLEAR opt_list.
MOVE 'JUST_EQ' TO opt_list-name.
MOVE 'X' TO opt_list-options-eq.
APPEND opt_list TO restrict-opt_list_tab.
Assign selection screen objects to option list and sign
KIND = 'A': applies to all SELECT-OPTIONS
MOVE: 'A'          TO ***-kind,
        '*'          TO ***-sg_main,
        'NOPATTERN' TO ***-op_main,
        'NOINTERVLS' TO ***-op_addy.
APPEND *** TO restrict-***_tab.
KIND = 'B': applies to all SELECT-OPTIONS in block BLOCK_0,
            that is, SEL_0_0, SEL_0_1, SEL_0_2
CLEAR ***.
MOVE: 'B'          TO ***-kind,
        'BLOCK_0'    TO ***-name,
        'I'          TO ***-sg_main,
        '*'          TO ***-sg_addy,
        'NOINTERVLS' TO ***-op_main.
APPEND *** TO restrict-***_tab.
KIND = 'S': applies to SELECT-OPTION SEL-0-2
CLEAR ***.
MOVE: 'S'          TO ***-kind,
        'SEL_0_2'    TO ***-name,
        'I'          TO ***-sg_main,
        '*'          TO ***-sg_addy,
        'EQ_AND_CP' TO ***-op_main,
        'ALL'        TO ***-op_addy.
APPEND *** TO restrict-***_tab.
KIND = 'S': Applies to SELECT-OPTION SEL_0_3
CLEAR ***.
MOVE: 'S'        TO ***-kind,
        'SEL_0_3' TO ***-name,
        'I'        TO ***-sg_main,
        'N'        TO ***-sg_addy,
        'JUST_EQ' TO ***-op_main.
APPEND *** TO restrict-***_tab.
Call function module
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
             restriction                = restrict
          DB                          = ' '
       EXCEPTIONS
             too_late                   = 1
             repeated                   = 2
             not_during_submit          = 3
            db_call_after_report_call = 4
            selopt_without_options     = 5
             selopt_without_signs       = 6
             invalid_sign               = 7
            report_call_after_db_error = 8
              empty_option_list          = 9
             invalid_kind               = 10
             repeated_kind_a            = 11
             OTHERS                     = 12.

Multiple selection screen.

hi all,
       how to create multiple selection screens,
i need 3 selection screens how to do it?
wats the maximum number selection screen can be created in a report.
regards
Suprith

SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS: p1 TYPE c LENGTH 10,
            p2 TYPE c LENGTH 10,
            p3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
PARAMETERS: q1 TYPE c LENGTH 10,
            q2 TYPE c LENGTH 10,
            q3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 200.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = 'Selection Screen 1'.
button2 = 'Selection Screen 2'.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'PUSH1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
        WHEN OTHERS.
      ENDCASE.
ENDCASE.

Doubt in Selection-Screen for Program type "Function Group"

Hi Gurus,
I created a Function group in that i created one screen and writtem the Screen flow logic. In that screen I called a Function module "COMPLEX_SELECTIONS_DIALOG" For Creating a selection-Screen.
The code snippet is like below.
CASE ok_code .
    WHEN c_clk1.
      CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
     EXPORTING
       title                   = text-002
       text                    = 'Material Number'
       signed                  = 'X'
        lower_case              = ' '
        no_interval_check       = ' '
         just_display            = ' '          " Un commented by Srihari
         just_incl               = 'X'          " Un commented by Srihari
        excluded_options        =
        description             =
        help_field              =
        search_help             =
       tab_and_field           = st_tab
      TABLES
        range                   = r_matnr
     EXCEPTIONS
       no_range_tab            = 1
       cancelled               = 2
       internal_error          = 3
       invalid_fieldname       = 4
       OTHERS                  = 5.
it works fine. But the problem is if i click the multiple selection button for the select-option in selection screen and enter the values and copy those value. In the multiple selection button green button is not coming like noram report selection-screen. Please remember I used the program type as "Function Group" not "Module Pool".
Please send your suggestions.
Thanks,
Srihari.

Ok, I am not 100% sure, if I understand you correctly, you said, you created one screen to 'simulate' a standard selection screen behavior without using select-options statement?
If that's not correct, could you please post a few more details on what exactly you are doing.
I had to 'simulate' a select-option behavior which I did as follows:
- I created a range variable to store the values (s_ctby)
- on the screen I defined the LOW (s_ctby-low), HIGH (s_ctby-high) and the multiple selection field pushbutton
- In the PBO I set the icons for the multiple selection pushbutton
READ TABLE s_ctby INDEX 2 TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    gv_createby = gc_icon_enter_data.
ELSE.
    gv_createby = gc_icon_disp_data.
ENDIF.
- In the PBO make sure that any values entered on the screen are transferred to the range
* transfer any changed values into the correct range for user transaction
* (screen 0110) because that screen just 'simulates' a selection screen
* so we have to make sure that any data the user enters in the selection
* fields is passed into the appropriate ranges
IF sy-tcode EQ gc_trans_user.
*   created by
    IF NOT s_ctby-high IS INITIAL.
      s_ctby-sign   = c_i.
      s_ctby-option = c_bt.
      IF s_ctby[] IS INITIAL.
        INSERT s_ctby INDEX 1.
      ELSE.
        MODIFY s_ctby INDEX 1.
      ENDIF.
    ELSEIF NOT s_ctby-low IS INITIAL AND
               s_ctby-high IS INITIAL.
      s_ctby-sign   = c_i.
      s_ctby-option = c_eq.
      IF s_ctby[] IS INITIAL.
        INSERT s_ctby INDEX 1.
      ELSE.
        MODIFY s_ctby INDEX 1.
      ENDIF.
    ELSEIF s_ctby-low IS INITIAL AND
           s_ctby-high IS INITIAL.
      DELETE s_ctby INDEX 1.
    ENDIF.
- If the user hits the multiple selection pushbutton
    WHEN gc_fc_create_by.
*     if the user hits the multiple selection button on the screen
*     we call the standard SAP functionality to show the multiple
*     selection popup SAP uses on a standard selection screen
      CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
        EXPORTING
          title             = text-t02
        TABLES
          range             = s_ctby
        EXCEPTIONS
          no_range_tab      = 1
          cancelled         = 2
          internal_error    = 3
          invalid_fieldname = 4
          OTHERS            = 5.
      IF sy-subrc NE 0 AND NOT sy-msgty IS INITIAL.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
*     now update the header line so the screen fields display the correct values
      CLEAR s_ctby.
      READ TABLE s_ctby INDEX 1.
Hope that helps,
Michael

Cannot enter value in selection screen for Hierarchy variable.

Hi All,
I have a hierarchy variable on the selection screen for Org unit.
When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
Can anyone tell why is this happening and is there any way this can be changed?
Thanks in advance.
-RJ

Hi Prakash,
I am not able to select or click on the input field of the selection screen before and after selecting the value
CTRL+K doesnt work for me.
The display field is populated only when i select a node from the F4 help screen.
When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
The variable is Mandatory multiple single value readu for input.
I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
This is the link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
I would like to know if there is a work around or setting that can be made to make it work?
-RJ

Selection Screen in Report Painter

Dear Experts,
I have an issue in the report painter. While executing the report from GRR2, selection screen is not displayed but report is coming as I expected.
I want to create the selection screen for this report. I have created this report without copying from the standard report.
Thanks in Advance.
Regards,
Aswimn

Hi,
Please refer following links.
<Link farm removed by moderator>
Regards,
Renuka S.
Edited by: Vinod Kumar on May 25, 2011 10:12 AM

Multiple selection screens for report

Similar Messages

Maybe you are looking for