Multiple sender file

Hi,
I have a file to file scenario a bit particular.
There is a unique receiver file communication channel.
Howerver, I must to create multiple file sender communications channels because sender ftp servers are different (and very numerous ! ).
There is any way to avoid configurate so many receiver determination and interface determination, to implement a multiple sender scenario ?
Thanks, in advance

Hi, Udo,
I'm trying your solution, but I must have an error and i don't find it.
In an scenario N senders (N business service) to 1 receiver (business system called TPV):
Receiver Determination
Sender service : *
Sender interface : MI_OUTB
Receiver party :   (none)
Receiver service : TPV
Configured receivers: Service TPV
Interface Determination :
Sender service : *
Sender interface : MI_OUTB
Receiver party :   (none)
Receiver service : TPV
Inbound interface: MI_INB
Receiver Agreement :
Sender service : *
Receiver party :   (none)
Receiver service : TPV
Receiver interface: MI_INB
Also I have created several Business Services with CC and Sender agreements.
And I have 2 problems:
Receiver determination doesn't recognize Interface Determination and REceiver agreement in Configuration Overview
Error RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC in Monitor.
Please, I need your help.
Thanks, in advance
Carme

Similar Messages

Multiple Exclusion Criteria[Exclusion Mask] in Sender File Adapter

Hello All,
I have a requirement to specify multiple exclusion criteria in the 'Exclusion Mask' property of a Sender File Adapter, i.e. I need to pick up files that correspond to 111*.txt from a specified source directory, but I would also want to exclude specific individual files that go by the following names:-111ACC.txt, 111INV.txt & 111PUR.txt.
I have tried the following - Specified 111*.txt in the 'File Name' field and in the 'Exclusion Mask' field specified ACC, INV & PUR - the exclusion criteria separated by commas. But this does not seem to work. All the 111* files are getting picked up.
Have gone through a couple of weblogs that deal with exclusion masks, but they do not talk about multiple exclusion criteria.
Is there any other way I could accomplish this?
Thanks,
Anand

Hi,
Try this config.
Give *.txt in filename. and Directory as <YourDir>
In exclusion mask give 111ACC.txt
Below this there will be a table. Add two Entries
Dont add anything to FilenameMask.
Directory ->FileNameMask--->ExclusionMask
<yourDir>->--->111INV.txt
<YourDir>->--->111PUR.txt
Try this and get back.
Regards,
Sudharshan
Message was edited by:
Sudharshan Aravamudan

Multiple directory locations in Sender File adapter

Hi All,
I have a scenario where my single adapter needs to poll from 7 different directory locations. Is it posible to configure all seven sorce directory location in single sender file adapter.
Regards,
Xier

Hi,
I apologize for wrong information, actually I never tried but it's possible after seeing this.
Note:821267
11. File Sender: Processing Multiple Source Directories
Q: Can the File Sender Adapter be configured to poll multiple source directories from a single channel?
A: This functionality is available starting with XI 3.0 Support Package 14 as well as PI 7.0.
raj.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

Creation of multiple nodes in target IDOC as per field from sender file

Hi SapAll.
here i have got a requirement in an File To Idoc Interface.
the requirement is there will be one field under sender file which will be repeating for multiple records(ItemCount),here pi need to check the value of this field for each record and if the value is 'x' THEN it should create the target node under idoc for the same no .of times as the occurance of this field(if the condition is true).
i just used the if Condition,text function(Equals) in the message mapping but it was not working for the
Case 1 :
if the condition in the first record fails but if it passes for the remaining records its not creating for the remaining records as it fails for the first record itself
Case 2: it is only working when the condition for the first record is sucess .
can any body help me in this.
regards.
Varma

Could be a problem of context, are you queue display is in one context or different context. You can use the SplitByvalue
regards,
lpbuff

Sender File(FTP protocol) Adapter not able to pick multiple files(eg *.xml)

Dear Experts,
I have SAP PI 7.0 installed on HP-UX. I installed Guild FTP on my Windows Vista machine.Configured File to File scenario. Sender File adapter(FTP Transport Protocol)is able to process the 'input.xml' file placed in FTP INBOX folder.
I want to process all/multiple XML files. For this I have changed File Access Parameters in Sender Communication channel as:
Source Directory - /INBOX
File Name - *.xml
Immediately Sender Communication status went into red with error log messages :
Error occurred while connecting to the FTP server "172.XX.XX.XX:21": java.lang.NullPointerException
Please let me know what is the issue. Thanks in Advance.

Hi
It should work with *.xml
Check with the connectivity as well.
If this is still unable to process files then check with the FTP server compatibility.
J2EE File adapter is based on RFC 959 and if GUILD FTP is non compatible to RFC format then exclusion mask may not work.
Thanks
Gaurav

Multiple Archive directories in Sender file channel

Hi Experts,
My requirment is to have multipple archive direcotories in Sender file channel.
We have multiple source dirs e.g.
c:/abc/
c:/bcd/
c:/cde/
and we want to archive the files from these source dirs to corresponding archive directories e.g.
c:/abc/archive
c:/bcd/archive
c:/cde/archive
I can see that we can have only 1 archive directory when the processing mode is kept as "Archive"
How can we achive the same , Please help
Thanks in Advance,
Jyoti

Hello,
I guess you don't have option to archive files in different directories using single CC.
You can archive the files in 1 directory and then run a OS script, which will place the files in different directories (using NFS as protocol).
Some reference:
http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/10392. [original link is broken] [original link is broken] [original link is broken]
-Rahul

One sender File to Multiple CC scenario

Hi,
Iam working on simple file to file Scenario in that iam using One sender file to multiple Receiver Communication Channel,plz help me out

Hi,
Configure one Sender File Communication and n Receiver Communication channel for n receivers.
Also u need to have....
1. n Receiver aggrement.
2. n Interface determination
3. 1 Receiver determination.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

How to send multiple data files / music files using bluetooth / whatsapp / emails...

hello everyone,,,
is there any option to send multiple data files / music files using bluetooth / whatsapp / emails...
as option to select multiple files using "SELECT in menu option / left aA"+ scroll tracepad" is availble with pictures only.
and while receiving files via bluetooth i'm unable to do any other activity.

One at time, via Bluetooth.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is the best way to send multiple pdf files to my ipad

what is the best way or app to send multiple pdf files to my ipad, so that I can then combine them into one folder

I have the app Readdle Docs. It allows you to move PDF files to your device and to move them around on your device. Might check it out. ( I think there's an iPad version of the app, but I have the iPhone version and it works, just not as pretty)
THere's also Goodreader, but I don't have experience with it to know if it has folder abilities.

Multiple files at sender File adapter

Hi,
I am new to XI and i am trying to do file to file scenario. My requirement is i want to send four files with different names from same directory to the receiver. Is it possible with one sender communication channel? If so can u please tell me how i can do..?
Thanks,
Naresh

Hi Naresh,
yes it can be done with single CC.
Check this blog:
XI/PI: how to exclude files in a sender File adapter?
Sachin

How to pick files from multiple directories via Sender File Adapter?

Hi guys,
I have a scenario File to IDOC. The Sender File Adapter has to take all files: .xml from Source directory E://Current/.
Actually directories are like
E:/Plant1/Current/
E:/Plant1/History/
E:/Plant2/Current/
E:/Plant2/History/.
Can I have one Sender File Adapter to pick all *.xml files
from
E:/Plant1/Current/ and
E:/Plant2/Current/ and how can I write it in Source Directory of Communication Channel?
Or do I have to have a Sender File Adapter for each Plant?
Any suggestion please?
Kind regards,
Danijela Zivanovic

Hey
You might wanna have a look at "Additional selection for source file" parameter in sender file adapter.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/singleSenderFileCC4MultipleDirectories
XI/PI: how to exclude files in a sender File adapter?
Even though this method works but there are some constraints,please check help.sap.com for constraints.
Thanx
Aamir

Multiple FTP server files for sender File adoptor

Hi,
we have a requirement to pick files from different FTP servers and send it as a proxy message to ECC.File structure format for both FTP server locations is same and I need to send as a same proxy message.
Please let me know how to achieve this. Thanks.
Regards,
Rajesh

Hi Rajesh,
Here you are having two FTP Server to pick the files so that you need to create below list of objects.
For two different FTP Server you need to create two different sender systems
2 sender File channels
2 sender agreements
2 receiver determinations
2 interface determinations(use single inbound interface in both interface determinations)
2 receiver agreement
If you want to use single sender then
2 sender File channels
2 sender agreements
2 receiver determinations
2 interface determinations(use single inbound interface in both interface determinations)
1 receiver agreement
thanks,
madhu

Advance select for source file in Sender File Adapter

Hi
I am trying to utilise the parameter 'Advance Selection for source file' on a sender file adapter to pick the file from multiple folders
My problem is that this parameter that is listed on the SAP help is not getting in File accessing Parameters.
I am running PI 7.02 (NW702_07_Rel)
Service pack 07
Has anyone come across this before?
any suggestions on how to do this?

Hi,
In PI7.0 the property exists. I have used it previously. I think SP was 13.
Regards,
Nutan
Edited by: nutan champia on Nov 24, 2011 10:42 AM

Mapping problem due to FCC in sender file adapter

Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
 KEY VBELN
 VBELN POSNR
E2E24* CHARG
 KEY
 POSNR
 CHARG
*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in FCC ignoer record set= true
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
 0201
 0202 in white fields
thanks & regards
Ashutosh Rawat

Source payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<VBELN>0083662685</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083662648</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083673936</VBELN> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
at target what required is
<item>
<VBELN>0083662685</VBELN>
<POSNR>900001</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900002</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900003</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900004</POSNR>
</item>
<item>
<VBELN>0083662648</VBELN>
<POSNR>900011</POSNR>
</item>
<item>
<VBELN>0083673936</VBELN>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
 ashutosh rawat

Multiple sender file

Similar Messages

Maybe you are looking for