Multiple separators in a file...

Hello Experts,
I have a file which has mutiple kinds of separator like '|', tab, etc. So,
how do I split my string table since I do not the kind of separator the file is using during
runtime.
Thank you guys and take care!

Firstly,
i think you should you command FIND to find for each separator, then replace each ones by other same separator (for instance replace all |, tab by '#').
Secondly,
split your string to table.
Hope this help

Similar Messages

Have found multiple iTunes Library.xml files. Moved Library to new Hard Drive and it needs to be completely rebuilt?

Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I had. I have had to hunt down my purchased Apps, Music and Movies and re-add them to the library. I also noticed in doing this I have multiple iTunes Library.xml files ... shouldn't there only be one? If so how do I clean this up without doing any accidental damage (i.e. how do I find the one that is being used and delete the rest?)? If I delete the others is there any risk of losing purchased content? Lastly syncing my iPads has become a nightmare as I get the "This iPad is currently synced to another iTunes library" message. Obviously something

It's hard for me to picture the exact situation. It sounds like you still have your library file on the internal but some files on the external, and maybe some on the internal, some of which are in the library and others not... By re-adding things after consolidating it may have made things into a hodge-podge. Yes, that article you referenced says: "iTunes for Mac: Moving your iTunes Media folder"with Media Folder being the emphasis. You probably should have just moved your whole iTunes folder. Still, moving the media folder as instructed should not have messed up the library. Did you make the mistake of starting up iTunes before the external drive had mounted fully and it then told you it couldn't find many files? How you proceed to sort it out will depend upon how much time you want to spend and how important things such as ratings and playcount are to you. I have not actually used the consolidate feature across different drives myself (and don't feel inclined to do so here to test ).
If you are in the USA you can download some previous purhcases with iCloud, but not all.
Here's a bit on what an iTunes folder should look like:
What are the iTunes library files? - [http://support.apple.com/kb/HT1660]
More on iTunes library files and what they do - [http://en.wikipedia.org/wiki/ITunes#Media_management]
Library files with graphic and explanation of different iTunes versions - http://discussions.apple.com/message.jspa?messageID=13169517
Once you get iTunes working off the external drive it should just put new media to the external when you add it.
I have almost no experience with synching (I synched my neice's iPod, once, about 4 years ago).

Scanning multiple pages into one file using MAC

How do I scan multiple pages and save them into one file or document using a MacBook Pro laptop? My printer is an HP Photosmart 7520. When I use this printer and scan from my PC, it does allow me to scan multiple copies and save as one document by just adding pages as I scan. When I scan with my MacBook Pro, it scans each page, however, I don't get any option or choice to save as one document. It automatically saves each page as a separate document.

Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
One of those is Format, make the Format PDF. Just below that will be a check box allowing you to scan multiple pages to one file.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Scanning multiple pages to one file

I have a C310a All in One printer/scanner. My computer uses OS X 10.9 and all the drivers are updated. Is there a way to scan multiple pages to one file. I have tried the three methods mentioned in the HP bulletin for Mavericks but I can only scan one page to one file extension.

Welcome to the forums @BPGeneva ,
I understand you are looking to do a multiple page scan and save it as one file. I will do my best to help! The full driver for the C310a is not available with Mavericks. In having said that, you can try using Image Capture to scan multi-page documents.
Click this link and have a look at PrintDoc's suggestion: Re: Scanning multiple pages into one file using MAC
I hope that helps
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Scanning multiple pages to single file

I have the HP Officejet Pro 8600. I use to be able to scan multiple pages to one file. For some reason now it separates the pages into single files. Under advanced settings it looks like the option "create a separate file for each scanned page" is checked, however, it is not highlighted so I can't change it or uncheck it.

KB-Sales,
Welcome to the HP Forum.
Assuming a recent Windows Operating System and that you install the Full Feature Software (printer software), then you may use the Printer Assistant shortcut to access Scan Document or Photo.
From there, you may be able to use / create a Scan Template to combine files to output to a final, single file.
The following Dragon Document may help:
Scan_Multiple_Documents-Combine
Note the hint about creating your own Shortcut / Template in the instructions.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How to delete multiple old ITUNES LIBRARY files safely ?

I'd like to clean up my Itunes LIBRARY files, but don't know what's safe to do and not to do. (I have Itunes 8.1 / OSX10.4.11)
MY QUESTION IS TWOFOLD :
(1) how do I create a new Itunes library file now with today's date; and
(2) how do I delete multiple (old) Itunes library files, without risking the loss of what I've got ?
This all stems from exploring Itunes as a result of a problem I had today... when trying to import mp3's from my terrabyte drive, after about 150 successful mp3 track imports, Itunes froze and everything else on my MAC froze as well (constant spinning colored wheel). After many failed attempts to force quit Itunes, I turned off my MBPro. On restarting, Itunes tooks ages to "import" files. Eventually Itunes opened but with only half of my original tunes (1500+ songs 8.11GB) and had nothing from today's import.
I found a post suggesting to hold down OPTION while starting Itunes. Then I selected a file from my hard drive > me > music > Itunes > "Itune library" with the most recent date and shezam, Itunes once again has all my songs, as before. Nothing I imported from the terrabyte drive today appears however, but no matter.
In my "Itunes" file there appear MULTIPLE Itunes libraries ! such as Itunes library, Itunes Library (damaged), and as well a folder called "Previous Itunes Libraries" which itself contains multiple Itunes Library files and multiple "previous Itunes Library files" with dates back to 2007. These I want to clean up and delete .... should I ? ... Can I ?
I really could use some words of wisdom from the wise ! Thanks in advance

Whenever you install a new version of iTunes and run it teh first time, iTunes will create a backup of the current iTunes library file and copy it into \Music\iTunes\Previous iTunes libraries, then update the iTunes library file in \Music\iTunes\ for the current version of iTunes.

Multiple databases in one file: a small snafu

Hello everyone,
Opening multiple databases in a single file is an administrative convenience. It is well explained in the manual (see db/docs/ref/am/opensub.html). Normally, there is little difference between databases in their own physical files or grouped together in a single physical file. There is one small sentence in the manual that says the following:
(begin fragment)
However, since multiple databases in a file exist in a single physical file, opening two databases in the same file simultaneously requires locking be enabled unless all of the handles are read-only. As the locks for the two databases can only conflict during page allocation, this additional locking is unlikely to affect performance.
(end fragment).
I didn't pay attention to it, except the "unlikely to affect performance" part which told me that I wasn't to worry about it. The sun was shining. Life was good.
And I was wrong. It was one of those "epic bug quests" I had to embark on, only to realise that it may not be a BDB bug, but my carelessnes. Nevertheless, I'm left with an uneasy feeling which I would like to explain here.
Consider BDB configured as a concurrent data store.
There are 2 threads. The first thread has the following pseudocode:
cursor1 = db1->cursor(...)
while(cursor1->c_get(... DB_NEXT...))
// 1
cursor2 = db2->cursor(...)
while(cursor2->c_get(... DB_NEXT...))
The second thread does only the following:
db3->put(...)
db1, db2 and db3 are all distinct databases. All cursors are read-only (the cursor implicitly used in db3->put is of course a write cursor).
While the first thread is running, the second thread executes db3->put(...) at "//1".
Question: what happens?
Answer 1: if db1, db2 and db3 reside in different physical files, nothing special happens. Everything proceeds as it should.
Answer 2: if db1, db2 and db3 reside in the same physical file, both threads block "sometimes".
The "sometimes" used here means "when the put operation in thread 2 needs to allocate a new page".
Reading the BDB source code is extraordinarily difficult (which says more about my limitations than about the clarity of the code) but here is what happens, as far as I could determine:
(thread 1) cursor1 needs and acquires a read lock on db1
(thread 2) db3->put needs a write lock on db2 to allocate a new page. Since db2 is in the same physical file as db1 and thread 1 already has a read lock, thread 2 waits until the read lock is released. Thread 2 blocks.
(thread 1) cursor 2 needs a read lock on db3. For some reason, BDB detects that the another thread is waiting for a write lock on the physical file, and thread 1 blocks.
Both threads block waiting on each other to complete.
I suppose the system is the way it is to avoid starvation, but there you have it: be careful when you're lumping together multiple databases in one file!
Anyone who can clarify or confirm this is welcome.
Vincent

I had experienced a similar problem. I run multiple process. Each one of them starts a transaction that does db->put and db->pget to its own database (which also has a secondary index). When each database is in a separate physical file there is no problem but when I put all databases in a single file the processes start to dead-lock.
The following combination of options solved the deadlocking problem:
- use serializable isolation level instead of snapshot, i.e. do not pass DB_TXN_SNAPSHOT to txn_begin
- do not pass the DB_NO_WAIT option to txn_begin
- use Btree instead of a Hash
Hope that helps.

Scaning multiple pages into one file on a 4630

Using HP 4630 printer, windows 8.1, wireless connection.
Want to scan multiple pages into one file.
Per user manual, I work from the computer not the printer.
When first page is scanned am asked if I want to save, I click yes and name file.
When I scan second page am again asked if I want to save, my file name appears, I am told it already exists and asks if I want to keep or replace it.
Whichever one I click, only the second page is saved.
What am I doing wrong?
Question: How do I scan mutiple pages into a single document?
This question was solved.
View Solution.

I accept this solution with many thanks! It was so obvious and I didn't see it. The User Manual should mention this.

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I add multiple images into one file?

I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
http://www.best10apps.com/apps/comic-story,531596060.html
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
I want to know how to add different pictures/images and put them into one picture.

One way is to create template PSD files and populate them with your images using Photoshops scripts.
Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

How to scan multiple pages in one file

I would like to know how to scan multiple pages into one file. There is no add button that comes up. I have a HP Officejet 8600 and a macbook pro. Please help, this would really help me out.

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

F110 - How to prevent multiple creation of DME file?

Hello,
I need to prevent multiple creation of DME file for the same Payment Run (after it has been created once).
"Printout" bottom creates DME file and Payment Advice any time you trigger it.
I'm searching for some User Exit / BAdi / Function that will help me to add ABAP code that will check if DME file has already been created.
Thank You in Advance

Hello,
Please check if the flag "Create payment medium" is not flagged at the proposal and the payment run file.
If it is flagged the payment file will be generated. Also when you press the print out button, the print program will be called and the system will try to created a new payment file.
In order to avoid duplicated payments you should consider using the flag 'Payment Document Validation" in your print program.
If the 'Payment Document Validation' parameter is not set ON, documents already processed for payment can be selected and paid again in a subsequent payment run, when posting terminations have occurred.
Please refer to SAP Knowledge Base Article 1713825 in order to activate Payment Document Validation.
Another option is to suppress the"Create Payment Medium" flag at Proposal Run.
In this case you should check the following information:
Please restrict the activity 15 of object F_REGU_BUK in the user
profile/role
You may also refer to the available activities on this:
- 02 Edit parameters
- 03 Display parameters
- 11 Execute proposal
- 12 Edit proposal
- 13 Display proposal
- 14 Delete proposal
- 15 Create payment medium proposal
- 21 Execute payment run
- 23 Display payment run
- 24 Delete payment run payment data
- 25 Create payment media of payment run
- 26 Delete payment orders of payment run
- 31 Print payment medium manually
Kind Regards,
Fernando Evangelista

Creation of multiple Records in the file as per multiple segments in IDOC

Hi SapAll.
i have got a requirement to create a multiple records in a file based on multiple segments at sending Idoc in a File To Idoc Interface.
the Scenario is the reciever message type is mapped with fields of 3 segments in sending IDOC.
SEG01 1.....1(PARENT SEGMENT)
SEG02 0...999999(CHILD SEGMENT)
SEG03 0...9999999(CHILD SEGMENT)
in an instance where if the SEG01 exists for one time and SEG02 exists for 2 times and Seg03 Exists for 2 times PI is creating the file with 2 records in it but
when if the SEG01 exists for one time and SEG02 exists for 2 times and Seg03 Exists for 1 time it is raising the error in message mapping where it is supposed to create 2 records in a file with empty values in the fields (mapping with seg03) segment.
can anybody help me in this.
regards.
Varma

you can create a UDF after you validate if the count match. if match you create the message if not, call de UDF.
this UDF should receive two parameters -->Queue SEG2 and queue of SEG3.
then you should loop by the count of SEG2. if you find a Supress Value in the queue of SEG3 add a "" to result. for example.
for(i=0;i<=SEG2.count;i++){
If SEG3<i>.equals(ResultList.SUPPRESS) {
result.addValue(" ");
}else{result.addValue(SEG3<i>);
the result of UDF is a queue which should map to target field directly coz it has context changes
I think that is what you are needing. if no let me know.
RP
Edited by: Rodrigo Alejandro Pertierra on Jun 17, 2010 11:56 AM

Multiple separators in a file...

Similar Messages

Maybe you are looking for