Multiple sequence view to the same batch

Dear All,
When I use Batch model of two stations I would like to have two sequences view as I get two executions view or two reports view.
The main gold is to have for each Socket three tabsequence view\Execution view\Report view.
Tnx

NewSCRUser wrote:
Hi Daniel,
The checkbox doesn't effect on the sequence view tab only on how to display the execution view tab(tile horizontally or documantlly)
If my batch model contain 4 sockets so I expected to 4 sequence view,4 execution view,4 report view
How do I produced 4 sequence view per batch
Are you talking about the sequence editor or an operator interface? There is only ever really one edit time copy of a sequence file in memory at a time, so showing it in 4 views would be misleading. At runtime, copies of the sequences are made for each thread that runs them, but they all come from a single edit time copy originally. Why do you want 4 edit time copies of the sequence? What exactly are you trying to do?
-Doug

Similar Messages

Can Numbers Display Multiple Views of the Same Table

Hi,
Excel and Appleworks both have a pull down tab on the vertical bar allowing multiple views into the same spreadsheet (table). Can Numbers do this?
I have a set of calculations at the top of a spreadsheet that are based on years and years worth of data under the calculations (same column). I add data for each new event (the rows) and watch the calculations at the top of the data. Easy to do in Excel or Appleworks, but, I can't figure out how to do this in Numbers.
Example:
Spot1 Spot2
Total 15 36
Avg 5 12
Jan 09 5 10
Feb 09 6 20
Mar 09 4 6
Apr 09
So... does Numbers allow the view "split" or multiple views that Excel and Appleworks allow?
Thanks!
Tom

Question asked and responded several times:
feature unavailable.
For multiple views of a table there is an easy workaround as we may build a table whose every cells grab their contents from the 'master' one.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) mardi 1 septembre 2009 21:56:42

How do I view multiple inbox folders at the same time in Mail?

I want to configure Mail to show me multiple inbox folders at the same time. I want to be able to split the screen and show in the top section unread messages, then messages I've marked with label A, then messsges I've marked with label B, then everything else in my inbox (like using the multiple inbox feature in Gmail). Is this possible?

Just figured it out - I can select multiple messages as you suggested when I am not in full screen mode.
So once I come out of full screen mode - then the multiple windows open.
QED

How do I use multiple local workspaces for the same website in VS2013?

For quite some time I've been using VS2010 with multiple workspaces mapped from the same TFS branch to test different variants of a website in parallel. The internal web server (Cassini) seems quite happy to run multiple versions and simply maps a new port
number for the second and subsequent instances that start up.
We are now looking to move to VS2013, so have to use IISExpress since the 'internal' web server is no longer provided.
How do I configure things so that if I open a single workspace, IISExpress runs against that workspace using the default port number (specified in the solution), but if I open a second instance in a different workspace it correctly uses a new port number
and working folder. Do I need to invoke IISExpress using the command line (presumably from each workspace) and specify the relevant defaults or is there some way to enter this in the local config file for IISExpress?
My initial attempt at editing to config file resulted in the 2nd and subsequent instance using the same physicalfolder as the first instance, presumably because the speficied site name and port number are the same!

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Based on your description, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
or IIS forums: http://forums.iis.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i set up multiple iCloud accounts on the same mac?

how do i set up multiple iCloud accounts on the same mac?

Interesting - I was sure I'd seen a note somewhere that it was only Mail, but this article:
http://support.apple.com/kb/ts4020
does say
Your secondary iCloud accounts can be set up and viewed in Settings > Mail, Contacts, Calendars on your iOS device, or Apple () menu > System Preferences > Mail, Contacts, Calendars on OS X Lion. You may choose to do this if you have a second iCloud account and need to access its Mail, Contacts, or Calendar data.
Note: While you can configure multiple iCloud Mail accounts in iOS, Push mail will only work for the primary iCloud account in iOS. Secondary account(s) will check for mail based on the settings in Settings > Mail, Contacts, Calendars > Fetch New Data.
It's not something I can test - I suppose the second account's data gets added to the lists in iCal and Address Book?

Multiple SSID's on the same subnet?

Can you have Multiple SSID's on the same subnet?
SSID1 authenticates clients via radius.
Our corporation bought printers with wireless cards that only support WPA-PSK so we created SSID2 for the printers. We can connect to both SSID's and ping from SSID1 to SSID2 but we can not perform other functions such as view the printer management interface with a browser. Should it be possibe to communicate between SSID1 and SSID2 on the same subnet?

Yes you should have no issue, but the only thing is that you are using a lower security method... so either you put them on different subnets so you can control the traffic via acl's or might as well use the same security method to make it easier. The fact that you can ping sounds like you should be able to http to the device.

Multiple MIDI takes on the same track - can only find one in the editor?

After making several passes on an instrument track w/drum sampler on it I opened the piano roll editor to edit the data only to find only one of the passes represented there. I could only find the other passes when I moved the current one out of the track temporarily. There must be a better way to do this, can anyone hip me to the right way to edit all the data in the multiple passes at the same time? I can hear all the data, I just can't see all of it.
I'm doing this so I only have to instantiate the Virtual Instrument once in the session, CPU is always at a premium these days. I have done the bulk of my work in recent years in ProTools but I have found Logic Express 8 to be far more efficient with CPU load on my core 2 duo Macbook. I suspect I'm just missing something but I cannot seem to figure it out. Help?

I appreciate your comments but my issue was in editing the already recorded tracks. If you can find in those pages where it shows how to view all the data from the already recorded multiple MIDI tracks at the same time in the piano roll window and be able to edit them I'd be much obliged if you would point those out to me. I double checked your recommendation after reading your first reply, the answer I needed was not there.
Evidently you can only select and view one region at a time no matter how many there are in the same track. I have searched the LE 8 pdf manual and also searched thru an Apple Logic Pro Training series book for version 7 JIC it had some additional insight into this particular issue and came up empty, that's why I was asking for additional insight on this panel. I always go to the documentation first - RTFM is first call for me.
I've already figured the workaround and I'll know better next time to allow Logic to create its own multiple take folders so as far as I'm concerned this case is closed. Thank you again for your input.

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

Multiple connection pools in the same DB physical source

Hi, I have this situation in BI Admin:
A single DB with 2 physical schema and 2 Connection Pools with OCI 10/11g.
Clicking on any table I can see the data after selecting the right connection pool for that table.
I created a Business Model based upon tables from one of the 2 physical schemas and a corresponding presentation layer. It is consistent and I can view the related subject area in Answers, but when I select a Dimension column (CONVERGENZA_NEGOZIO.STATO) and the fact measure ( Convergenza_Fact.INCASSO ) in viewing results I get this error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT CONVERGENZA_NEGOZIO.STATO saw_0, Convergenza_Fact.INCASSO saw_1 FROM Convergenza ORDER BY saw_0
Is it caused by the multiple connection pools under the same DB?

Yes I think that's correct, but only if you're going to use the same user to connect to them.
If you have a single user you're using to connect to a database to read data which happens to be over more than one schema, you'd use one connection pool.
However if you have entirely separate schemas (eg. different applications) and need to use a different user for each then you would use one connection pool per schema. Also if you thought you might move one of the schemas to another physical database at some point in the future it might be prudent to use a separate connection pool from the outset.
If you're still getting the error that the table cannot be found and your users have full permissions then logically the table that's being looked for does not exist, or you have not qualified it. What I mean by that is if you are connecting as USER2 and SELECT * FROM TABLE_A then the database will assume that you mean USER2.TABLE_A. If you mean USER1.TABLE_A then you need to make sure the qualification is in there.
In the admin tool check your Physical layer is set up correctly with your Physical Tables residing in the correct Physical Schemas.

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

How to load multiple HTML5 canvas on the same page (the proper method)

Hi,
I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
Here is a sample of what I'm doing:
1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
3rd: Edit the javascript like this:
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsFirst = createjsFirst||{};
            var createjs = createjsFirst;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/first.js"></script>
        <script>
            function initFirstAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("firstCanvas");
                exportRoot = new libFirst.first();
                stage = new createjsFirst.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                createjsFirst.Ticker.addEventListener("tick", stage);
        </script>
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsSecond = createjsSecond||{};
            var createjs = createjsSecond;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/second.js"></script>
        <script>
            function initSecondAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("secondCanvas");
                exportRoot = new libSecond.second();
                stage = new createjsSecond.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                createjsSecond.Ticker.addEventListener("tick", stage);
        </script>
<body onload="initFirstAnimation(); initSecondAnimation();">
Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
Many thanks!
#flash #reborn

I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
$(document).ready(function () {
        var canvas, stage, exportRoot;
        // First movie
        canvas = document.getElementById("firstCanvas");
        exportRoot = new libFirst.first();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libFirst.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Second movie
        canvas = document.getElementById("secondCanvas");
        exportRoot = new libSecond.second();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libSecond.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Third movie
        canvas = dument.getElementById("thirdCanvas");
        exportRoot = new libThird.third();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libThird.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);

Can multiple people post on the same shared photo stream?

Is there a way to have multiple people post on the same shared photo stream?
My cousin would like to have a single shared photo stream where we can both post photos on it and comment, instead of having two separate shared photo streams.
We think that there should be an option for the album creator to give access to anyone he/she shares it with to enable them to also post pics on the same stream.

The only link I have is to manage your team account http://forums.adobe.com/thread/1460939?tstart=0
The only Adobe program/process for team work that I know of is Adobe Anywhere, but that requires a very different process
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
http://www.creativeimpatience.com/adobe-anywhere-enterprise-solution/

Can multiple APEX application use the same parsing schema?

Hi,
I have 4.2 APEX thru pl/sql Gatewat, 11gr2 DB and using theme 24.
Due to the APEX limitation for version control I would be splitting 1 big ERP applications into 24 different APEX applications and each application would be considered as 1 unit for version control.
I have about 800 tables and I would assume that all of these would need to be stored in 1 schema since a lot of these table are linked thru FK.
Can I have multiple APEX APPS using the same parsing schema? or is there a better way to do this?
Thanks in advance!

Hi,
Multiple applications can have same (one) parsing schema.
You can test that on e.g. apex.oracle.com, where normally you have only one schema and you create multiple applications and all use that same schema.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai
Edited by: jarola on Jan 28, 2013 7:15 PM

Multiple profiles/users on the same device

Hi there,
I know that iOS is a single user environment.
But, I am currently working in an enterprise environment and I was wondering if it was possible to have several profiles on the same device, maybe using certificates or so?
Thanks for your help
Cheers,
Pierre.

It would seem that unlike previous iOS devices the iPad and possibly AppleTV call for the ability to enable multiple profiles/users on the same device.
I would suggest that if this capability is not on the roadmap for iOS by now then there is a least one place where alternatives to the iPad will have a major advantage.
The thought they I would have to buy multiple iPads one for myself, my wife and my child because of a software constraint is untenable from a ecological standpoint (all these devices end up as landfill) let alone the economic one.
Also as I use the iPad I see it's potential to become as important computing platform to me as my laptop eventually surpassing it. In this light I can't see how it could remain just a personal device.

Multiple disconnected users on the same laptop

Has any open come across the following requirement? I have a customer that is interested in 'sharing' laptops with multiple offline users with the ability to sync. Can we have multiple disconnected users on the same laptop? If so what would be the options? The challenge is how to manage multiple extracts on one MWC installation. I suspect that 'OOTB', we only support one extract per machine/installation of the MWC. We may be able to support multiples, but it would take some config/customization.

Please don't post the same question in different forums
Siebel Remote - Can multiple disconnected users be on the same laptop?
multiple disconnected users on the same laptop
Siebel Remote - Can multiple disconnected users be on the same laptop?

Multiple sequence view to the same batch

Similar Messages

Maybe you are looking for