Multiple series charts foreground & background

I am defining a chart in action script and wonder how to get
define which series gets displayed on top of the other. For
example, take a chart with 2 vertical Axes sharing the x axis for
dates. Y1 is a line and gets defined first and added to the
seriesArray (an Array), then Y2 is a column series and gets defined
and added to the seriesArray. Then:
myChart.series = seriesArray.toArray();
But I really want the column displayed behind the line. Is
there anyway to do this other than adding the axes to the array in
reverse order?

Post Author: Dac
CA Forum: Charts and Graphs
thank you so much for the response and help!
i've done the settings you said - it really makes sense what you saind in the message - but still nothing is drawn on the chart.
see the screen shot of all the settings and table data
also there comes that warning CR message which i disregard and continue - but still does not work fine...
any other suggestions? I still have hope for a solution

Similar Messages

Multiple series chart with differing dates

Is there a way to display multiple series on a chart when the
data for the horizontal axis doesn't match up? For example:
if data1 (val, date) is (10, 01/05/2008) (15, 02/08/2008)
(20, 03/01/2008)
and data2 (val, date) is (8, 01/12/2008) (25, 02/10/2008)
(30, 03/14/2008)
how would I get the data to display on a multiple series
chart. Right now, I am using a CategoryAxis for the horizontal
axis. If I do something like this:
hAxis.dataProvider = data1;
hAxis.categoryField = "date";
it will show only the series for data1, but not data2.

Thanks for the reply.
That link tells you how to add multiple axis to a chart which
is what I'm doing, but unless you want to have two horizontal axis
on the bottom (which looks terrible) or put one on the top and one
on the bottom (which looks awkward), this solution is not very
good.
The problem is that the data ranges for the horizontal are
the same, but the individual timestamps are slightly different,
sometimes off by only a few hundredths of a second.
To attempt to work around this, I merged the two arrays, but
that seemed to mess up the display of the data.
Is there not a way to just draw the second series on top of
the first without having to lock it to the axis? It seems like the
answer is no when using the standard packages. But is there a way
to override this and get it to draw properly?

Legend Problem in multiple series chart

Hello,
I am getting problem in displaying legend. I have created a chart with multiple series and custon color. Here is my code. You can copy paste it.
Out of 3 only one legend marker n label coming.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#FFFFFF, #FFFFFF]">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
      [Bindable]
      public var SMITH:ArrayCollection = new ArrayCollection([
        {date:"22-Aug-05", close:41.87, close2:45.23},
        {date:"23-Aug-05", close:45.74, close2:40.90},
        {date:"24-Aug-05", close:42.77, close2:46.99},
        {date:"25-Aug-05", close:48.06, close2:40.22},
     [Bindable]
      public var DECKER:ArrayCollection = new ArrayCollection([
        {date:"22-Aug-05", close:157.59},
        {date:"23-Aug-05", close:160.3},
        {date:"24-Aug-05", close:150.71},
        {date:"25-Aug-05", close:156.88},
    ]]>
</mx:Script>
<mx:Style>
    ColumnChart {
        paddingLeft:20;
        paddingRight:20;
        paddingBottom:10;
        paddingTop:10;
     Legend {
     paddingLeft:20;
        paddingRight:20;
        paddingBottom:20;
        paddingTop:10;
</mx:Style>
      <mx:Stroke id="axisStroke"
        color="#000000"
        weight="2"
        alpha=".75"
        caps="round"
    />
<mx:VBox width="500" height="500" borderColor="#000000" cornerRadius="20" themeColor="#009DFF" borderStyle="solid" borderThickness="1" horizontalAlign="center" x="246.5" y="61">
     <mx:ColumnChart id="multipleChart" showDataTips="true" width="100%" height="100%" seriesFilters="[]">
        <mx:horizontalAxis>
           <mx:CategoryAxis id="h1" categoryField="date"/>
        </mx:horizontalAxis>
        <mx:horizontalAxisRenderers>
            <mx:AxisRenderer placement="bottom" axis="{h1}">
            <mx:axisStroke>{axisStroke}</mx:axisStroke>
            </mx:AxisRenderer>
        </mx:horizontalAxisRenderers>
        <mx:verticalAxisRenderers>
            <mx:AxisRenderer placement="left" axis="{v1}"><mx:axisStroke>{axisStroke}</mx:axisStroke></mx:AxisRenderer>
            <mx:AxisRenderer placement="right" axis="{v2}"><mx:axisStroke>{axisStroke}</mx:axisStroke></mx:AxisRenderer>
        </mx:verticalAxisRenderers>
        <mx:series>
           <mx:ColumnSeries id="cs1" horizontalAxis="{h1}" dataProvider="{SMITH}" xField="date" yField="close" displayName="Smith" fills="#6693B0">
                <mx:verticalAxis>
                   <mx:LinearAxis id="v1" minimum="40" maximum="50"/>
                </mx:verticalAxis>
           </mx:ColumnSeries>
           <mx:ColumnSeries id="cs3" horizontalAxis="{h1}" dataProvider="{SMITH}" xField="date" yField="close2" displayName="Smiths" fills="#86D1E4">
           </mx:ColumnSeries>
           <mx:LineSeries id="cs2" horizontalAxis="{h1}" dataProvider="{DECKER}" xField="date" yField="close" displayName="Decker">
                <mx:verticalAxis>
                    <mx:LinearAxis id="v2" minimum="150" maximum="170"/>
                </mx:verticalAxis>
                <mx:lineStroke>
       <mx:Stroke color="#CC3300" weight="1"/>
    </mx:lineStroke>
           </mx:LineSeries>
        </mx:series>
     </mx:ColumnChart>
     <mx:Legend dataProvider="{multipleChart}" horizontalAlign="center" direction="horizontal"/>
</mx:VBox>
</mx:Application>

I've run into this, too:
Remove the fills property from each ColumnSeries and it'll work.
If you want to use the fills property, you'll have to add your own custom legend code.
From the Flex API:
"If you specify the fills property and you want to have a Legend control, you must manually create a Legend control and add LegendItems to it."

OBIEE10g-Multiple Series Chart.

Hi Friends,
I have a requirement in OBIEE10g.
MULTI SERIES CHART with STACKED.
If it is possible, Please tell me the steps.Its urgent.
Help appreciated.
Regards,
Chaitanya.P

Thanks for the reply.
That link tells you how to add multiple axis to a chart which
is what I'm doing, but unless you want to have two horizontal axis
on the bottom (which looks terrible) or put one on the top and one
on the bottom (which looks awkward), this solution is not very
good.
The problem is that the data ranges for the horizontal are
the same, but the individual timestamps are slightly different,
sometimes off by only a few hundredths of a second.
To attempt to work around this, I merged the two arrays, but
that seemed to mess up the display of the data.
Is there not a way to just draw the second series on top of
the first without having to lock it to the axis? It seems like the
answer is no when using the standard packages. But is there a way
to override this and get it to draw properly?

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

Candlestick chart problem with multiple series

Hello,
I added one mx:CandlestickSeries object and couple additional
mx:LineSeries objects to the chart. All series are represented but
still I have one problem. More series I add - less candles are
becoming of CandlestickSeries data. It seems that there should be
any scaling option for all series in the chart or something like
this, but I cannot find it. I'm still new in Flex Can anyone halp
me with this?
Thanx in advance
marukas

I've added screenshots to get better view of the problem.
Here is chart with addtional series:
Chart
with multiple series
And here nothing is changed except that additional line
series were removed:
Chart
with only one CandlestickSeries
Is it possible to get the same candles as in 2nd view with
addiotnal series added?

Stacked Bar Chart with Multiple Series Sort Question

Hi,
Apex version 4.1.1
I have a stacked bar chart with three separate series, one showing customer effort, another showing project effort and the third showing other effort, summarized by calendar week. The x-axis of the chart is the calendar "week of" date, and the y-axis has a bar for each of the three series. Not every type of effort occurs every week.
When AnyChart renders the chart, the order of entries on the x-axis seems to be dependent both on which series are present in a given week as well as the "week of" date. Weeks with all three series sort in order by calendar date, followed by weeks where just the 2nd & 3rd series are present, followed by weeks where just the 3rd series is present. See this [url http://tinypic.com/r/b9zdt/6] picture of the chart noting the "week of" dates. Note that the months go Sep-Oct-Nov-Aug-Oct.
Is there a way to force AnyChart to sort the x-axis in chronological order regardless of whether there is data for all three series for a given week? I have looked through the AnyChart XML reference but cannot find a way to do this.
Incidentally, I can solve the sorting problem by combining all three series into a single query:
select
null as link,
week_of as label,
sum(customer_effort) as "Customer Effort",
sum(project_effort) as "Project Effort",
sum(other_effort) as "Training, Admin and Other Effort"
from ...But if I do this, I cannot figure out how to have each bar on a given week link to a different detail page, e.g., if I click on a bar representing customer effort I want to link to one page, but if I click on a bar representing project effort, I want to link to a different page. I have had a look at the [url http://apex.oracle.com/pls/apex/f?p=36648:59:1570983160946101::NO:::] chart examples posted on apex.oracle.com, but cannot figure out how to apply to multiple series in a single query.
Thanks,
Mike

Thanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
     trunc (each_day) as week_of,
     0 as effort
from (
     select
          (to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
     from dual
     connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
     to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike

Multiple series in a chart

Hi
I want to create a chart with multiple series, each serie referring to a specific country.
The query below is not accepted:
SELECT null url,s.date_from,s.country,sum(s.unique_players) unique_players
FROM my_table s ...As a workaround I changed the query to:
SELECT null url, s.date_from,
sum(decode(s.country, 'se', s.unique_players, 0)) sweden,
sum(decode(s.country, 'fi', s.unique_players, 0)) finland,
sum(decode(s.country, 'no', s.unique_players, 0)) norway ...
FROM my_table s ...It works well but it is not very flexible, in the case a new country has to be added.
Is there a better way to achieve this in Apex 3?
Thanks
Luis

Luis,
You can chart a variable number of series with a query like the second one you listed, except use "Function returning query" instead of "SQL query". Then generate the column list clause dynamically, one for each series.
There's an enhancement request logged to make this easier.
Marco

Plotting multiple series on an SVG Chart

Hi,
I am trying to plot multiple series on an SVG Chart. The moment I add a second series, I get the following error:
"SVG Chart error: ORA-20001: line_chart error: ORA-20001: get_data error: ORA-20001: Parse error: ORA-0093".
The graph fails to plot multiple series even for the same queries. The query I use is something like the following:
select null "link", substr(name,7) "Label",value "Value"
from <table>
where
<conditions>
and name in (<sub-query>)
order by name desc
I have previously used an SVG chart to plot multiple series and have never had such problems. Any help would be greatly appreciated.
I tried deleting and recreating the chart - doesn't help.
Thanks,
Aswath

If you want to order the data do it via an in-line view:
SELECT *
FROM (
select null "link", substr(name,7) "Label",value "Value"
from <table>
where
<conditions>
and name in (<sub-query>)
order by name desc
)

Line Chart with Multiple Series

Post Author: JayZee
CA Forum: Charts and Graphs
HI
I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
My data is provided summarized on the server and is returned as 12 rows:
Month Year1 Year2 Year3 Year4 Year5January 100 80 75 90 120February 85 25 40 25 80etc for the rest of the months
My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server. I have read an article on the support site for Crystal 6.0 but it doesn't seem to translate well into XI.
If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
Any help greatly appreciated.
Jay

Post Author: Tim Wise
CA Forum: Charts and Graphs
In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
Is that what you want?
I did this in CR 2008 using your data in an Excel sheet.

Flash chart performance issue with multiple series

Hi,
We have a problem with the performace of a line graph which has multiple series.
I have set up an example application here:
http://apex.oracle.com/pls/apex/f?p=37504:1
The application contains two charts. The 'Mulltiple Series' chart has twelve series behind it and allows the user to include mutiple series data. The other chart has just one series.
The single series chart takes only a couple of seconds to render, however the mutiple series chart takes around 10 seconds even when no additional series have been selected. Using Firebug I have observed that the apex_util.flash procedure is taking around 8 seconds to generate the XML, and it includes null data values for the series that aren't selected.
My question is how can I make each series conditional, such that no data is included in the XML if the series returns no rows?
Thanks,
Andrew

Hi Andrew
Have you considered modifying your chart to use a series with the "Query source type" of "Function returning SQL Query"
Have a look at
Re: Flash chart - multiple series - no display when some series empty
My response on that thread may help. I'd be interested to know if this approach improves the performance.
Kind regards
Simon Gadd

Enable Alerts not Active when using have multiple series in chart

Alerts option is not active when, I am having Multiple series in a Chart.....
is this common in Xclesius, is there any alternative for should alerts.
Thanks in Advance

Multiple series alert functionality is available in SP 4. Use Combination cart for multiple series. You will get that option for sure.
I am using it.
My suggestion is, you download SP4 and then continue your development.
as you said you are using Fix Pack 3.5.
Edited by: Debjit_Singha_86 on Aug 17, 2011 5:37 AM

Showing Multiple Colors in a single Line series Chart

Hi there,
I need to show some High,Low and Normal datapoints with different colors on a single series chart
I have to use line series.
Can anyone help me with this, I not even sure if this is possible
Please throw some light
Thank you

For the first variant.
You have a LineSeries for all data.
You manually divide your dataProvider for three providers: with low, hi and norm values. And Create additional PlotSeries for each part and set coloror what you want. So line will be shown by LineSeries and point will be shown and colored by PlotSerieses. Very simple variant but if you need to change the low and hi limits It's not so good. But if this limits are static and data is static it's very good.
If data and limits are dinamic or you want to create more correct solution. It's not so difficult to create itemRenderer for LineSeries (there is a style property itemRenderer). Read about renderers in docs^ http://www.adobe.com/devnet/flex/quickstart/using_item_renderers/

Change colors in multiple pie chart - with legend

I need to change the colors of groups shown in multiple pie chart diagram in CR XI.
I managed to actually change the colors in the diagram by using highlighting rules in the wizard. (Sorry, I need to guess the correct English terms since I am using the German version.)
But the colors in the legend are not affected by the rules, so the legend displays colors which are not shown in the diagrams at all. How can I fix this?
Thanks in Advance
Andreas

Hi Andreas
I have the same problem.
I found this BO note:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131383434373026
I says that this behaviour is by design and cannot change
Not what you would expect really!
If the series colour can be changed then why does the series marker colour not match the series it represents?
Patrick

Annotating ColumnChart using CartesianDataCanvas - multiple series

I am trying to annotate a column chart with confidence
interval bars using the CartesianDataCanvas. The chart has multiple
series, so for each x value there may be four or five columns. The
chart itself offsets these columns nicely, but the x value used in
the CartesianDataCanvas only relates to the middle of the middle
bar. Is there any way of working out what offset to use to match an
annotation to each individual bar when there are multiple grouped
bars? I can't seem to find a property that has this
information.

This seems to work, how cool!
<mx:SeriesSlide
    id="slideOut"
    duration="1000"
    direction="left"
    effectEnd="lineSeries.visible=false"
/>
<mx:SeriesZoom id="zoomOut"
    duration="2000"
    minimumElementDuration="50"
    elementOffset="50"
    verticalFocus="top"
    horizontalFocus="left"
    relativeTo="series"
    effectEnd="lineSeries.visible=true"
/>

Multiple series charts foreground & background

Similar Messages

Maybe you are looking for