Multiple Server with dedicated Internet access Network

Hello everyone ..
Ok .. keeping it as short as I could ..
Current setup:
2 Dell PowerEdge 2950 Servers Windows Server 2008 R2 each connected to it's own TP-Link router (TL-WR741ND) with static IP for dedicated internet connection ..
Switch:
Cisco Catalyst 2950 switch.
Problems:
1) How to connect both servers to a LAN enabling them to communicat with each other directly regadless of the separate internet access ..
2) How to use USB-Ethernet adapter to re-configure the switch.
Any thoughts are highly appreciated ..

sounds like your dns server has stopped working or your netmask or router setting in your network config changed.
test to see if your dns failed
ping -c 5 8.8.8.8
ping -c 5 google.com
if 8.8.8.8 works, but google.com doesn't - then you have failed dns.
Changing your dns settings can have some consequences - so I can't provife a universal suggestion here.
In general though, your computer should be using itself for DNS (in network settings, dns, it should have 127.0.0.1 as the primary address). And your DNS server should be setup with your server hostname. Run this utility to check.
sudo changeip -checkhostname
Jeff

Similar Messages

Setup a home file/Media server with no internet access

Hi,
I have a home network with a wifi router connected to an Adsl modem. I try to setup a new server (macbook pro with Yosemite as OS) which will be only used as file and media server for my local network.
I DO NOT want this server to have access to out of my local network and no one out of my local network could access it. in other words, it has to be isolated as a local server with no incoming/outgoing access from out of my local network.
I should mention that this server can be accessed by other family members and they can setup other applications without my awareness... and I do not want to manually deny each access request (in or out) in the server's firewall and I am not always behind the server. I want to be sure that "all access" from/to out of my local network are denied.
my local network dhcp rang is 192.168.10.10 to 192.168.10.20 and I have a firewall on the router and one on this server (little snitch).
I have no idea how to do this, how to configure IPs out of my local network in the firewalls etc...
I would appreciate if anyone can help me (I have a limited knowledge about networking)
Many thanks
Bye

Thanks for your reply ChuckBing.
Unfortunately I had already copied the instructions I found in the Sun documentaion to the letter and it still needed access to the internet. In the end I solved the problem by pointing the iepluginurl to a non existent file and putting a URL, pointing to an offline JRE executable on the server, as the message that appears when the applet cannot be loaded. The clients then have the choice of downloading the JRE or installing it online by clicking on the URL.
Thanks anyway.
David

Change Flash Security Settings With No Internet Access?

Hello
I have firefox at home with no internet access, is it posible
to alter my flash installation so it enables access to other
content. it brings up a settings window but that just goes to a
dead url.
I have a a collage disk but it will not run untill I alter
the settings of flash to allow acess to other site, other location?
Please help?

phil ashby wrote:
> Glad it worked!
>
> Urami, I did some fairly extensive tests with this idea
and it seemed to work
> each time - although all our corporate machines have the
same build. Even if
> the directory didn't exist, if you created it and placed
the SOL inside, it
> words. In the end I never actually used it as I
distributed the app as an exe
> which doesn't have such draconian security requirements,
also it obviously
> overwrites the users original version, if present.
I agree with you, I tried different SOL editor and it work
when i tried.
I believe what I used was more than SOL explorer/reader
rather then editor
even tho it has this option is seem the file stop working and
hence the
problem I was claiming about the files not work properly.
Perhaps it was changing something and flash did not like
these changes.
Anyhow, I did try another tool and did manage to work.
Thanks
> Personally, I think it's a bit of a hole in the whole
Flash security issue.
Won't comment on that one :) Something just seem way
unnecessary and silly...
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Using Creative Cloud on a desktop in a rural area with no Internet access

I have a Creative Cloud subscription for my home desktop. I will soon be participating in a photography workshop in a rural area with NO INTERNET ACCESS. I don't own a laptop and will be hauling my desktop to the place we're staying. I know the software is installed on the machine and I should be fine with using it without online access, correct? Am I also correct in thinking it won't be "seen" as being used on a second computer because while I use it on this trip I won't have Internet access and therefore no IP address?

Hi there
The only thing that might cause you trouble is if your workshop is over a month long. While using applications downloaded from Creative Cloud, internet access is required once a month for a routine license check. Here's a snipet from the Creative Cloud FAQ:
http://www.adobe.com/products/creativecloud/faq.html
Do I need ongoing Internet access to use my Creative Suite applications?
Because your Creative Suite applications are installed directly on your computer, you will not need an ongoing Internet connection to use them on a daily basis. However, you will need to be online when you install and license your software, and at least once every 30 days thereafter. The software will alert you when you need to connect to the Internet for a license status check.
A quick note: if the product is unable to verify your license at the 30 day mark, a 7-day grace period will begin. However, if you are not able to access internet within those 7 days, your applications will be blocked (Soucre: http://forums.adobe.com/message/4513667#4513667)
Regarding your second question - as long as you are using the same device you already have your applications installed on, you'll still only have one device registered to your account.
If you have any more questions, please don't hesitate to post here again.
Cheers!

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills. I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number. Please let me know as soon as possible so I can change passwords or anything that is needed.
thanks

If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
Barry

I recently bought an i phone 5, but in the home with wireless internet access, it si countinued when off, i do not know what reason. but i go to apple store, the phone can working with Wi-Fi

i recently bought an i phone 5, but in the home with wireless internet access , it is continued when off, sometimes can not working,
i do not know what reason, but i went to apple store, Ha, the phone can go to Wi - Fi and connected is good.

but in the home with wireless internet access , it is continued when off, sometimes can not working,
What does "it is continued when off" mean?
And the same for "somtimes can not working"?

A basic phone with no internet access.

I need a phone for my son with no internet access whatsoever. I have him set up on a plan that allows me to block data but if he has access to wifi he can still access the internet. I am talking about non smartphones. I am frustrated and disappointed that AT&T (or anyone else) does not offer a phone that is not wifi enabled. Even a $9.99 tracfone gives web access!

Thanks to both of you for your replies. My son only needs a phone when he travels which is about 10 days out of the year so gophone is definitely the way to go. I just found that you have to be very careful with the phone that you use. Most phones today - even the $10-$15 flip phones - allow WiFi access. You can block paid data use on the phone but if a phone allows for WiFi connectivity there is no way to block that access in public places where WiFi is free (i.e. airports). I had to go with an older (used) phone to find one that did not have WiFi connectivity. We had an old Pantech Laser laying around that worked. Then I had to have AT&T block the data to the phone. FYI for gophones they cannot block this in the store you have to call in and do it over the phone. This was not explained to me and so the first trip with the phone my son was accessing data. I gave AT&T an earful as I had carefully explained I needed data blocked and was told it was done. They credited me the data charges. I am not sure if the AT&T Z222 has WiFi capability or not. In the specs it says it does but the salespeople at the AT&T store says it does not. I had originally tried a $9.99 Tracfone from Walmart and was told that it did not have data access. That information was incorrect.

I want to install Flash on a computer with no internet access. How do I do this?

I want to install Flash on a computer with no internet access. When I tried to download, I got a message that Flash is already installed. Yes, it is, on my PC. I want it on my laptop, too. How do I accomplish this?

Download the Adobe Flash Player offline FULL installer directly by right clicking one of the following links and selecting "Save target as" (IE), "Save Link As" (FIrefox) or "Download Linked File As" (Safari).
Flash Player 12.0.0.44 for ActiveX (Internet Explorer)
Flash Player 12.0.0.44 Plug-in (All other browsers)
Flash Player 12.0.0.44 (Mac OS X)

Adobe id with no internet access?

I bought Photoshop Elements 12 (in a box) for a friend of mine. She installed it on a computer with no internet access and now the "creat adobe id or your program will quit working" dialog box keeps coming up. How can she keep her program working without an internet connection? I do not appreciate Adobe forcing people who buy physical product to register them online!

She will have to connect the machine to the Internet at least once to activate and log-in with an Adobe ID. It does state on the box that an Internet connection is required to do this. If that is a real problem for her then, depending on where you bought it, you may be able to return it for a full refund.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Updating flash player on a computer with no internet access

I need to update flash player on a computer with no internet access. How can I select to have it downloaded to a flash drive? The download process keeps adding it to the computer I am using, but that is not where the update is needed. What am I doing wrong?

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

HT201334 How does one set up profile manager on a completely closed network with no Internet access available or even possible?

I need to set up Profile Manager on a completely closed network that has no Internet access at all. I can sneaker-net files into the network if I need to.
Profile Manager (and Lion Server in general) seems to need outside access to complete setup and I've been unable to find any meaningful answers.
Does anyone any any ideas?
Thanks to all

you could try it without enabling apple push notifications in server
you wont' be able to push out profiles without enabling apple push notification
but users could download them, or you could install manually, e-mail etc

Temporarily disable Digital Signature Checks to Install MS SQL Server 2008 with no Internet Access

I am attempting to install a licensed copy of MS SQL Server 2008 in a Private Enclave that does NOT have Internet access on a Win2008 R2 SP1 server (that is VM - thus I can't reboot and press F8 to select "Disable Driver Signature Enforcement"
). The installation fails with an error of the vc_red.cab file being found either corrupt or a bad digital signature. The file is good, but the signature has an expiration of 2011. I understand that a DOTNET SDK v1.1 program called setreg.exe
will enable disabling the digital signature check, but I am not permitted to use that program.
I might be permitted to use the "Signtool.exe" utility, but it is not clear what command sequences are necessary to disable and then re-enable the Digital Signature checks.
I saw a thread that recommended using the command:
bcdedit.exe /set nointegritychecks ON
However, the comments indicated that this might not have worked.
Are there Registry settings I can use with regedit to make the necessary changes to be able to install the application? I anticipate running into this problem with other software when I do not have Internet connectivity. I already tried
downloading the Microsoft CRL files; updated the lists on the Server; and rebooted. This did not solve my problem.

Hi,
As far as I know, it is not recommended to disable digital signature check.
Since we are not familair with installing MS SQL server, please also refer to SQL forums below to see if experts there have more insights regarding the matter.
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

VPN Server with two router local network

I just got a Mac Mini Server 2011 to set up as a home server. One of the main features I want to use is a VPN so I can access my files on my local network when I'm away from home. I live in Japan and I have a Japanese optical connection to the internet that runs through two boxes before I can use it in any form: some sort of modem, and a "gateway" which I literally just found out is also acting as a router and serving DHCP addresses. In addition, I have a 2TB Time Capsule that, until just recently, I had been using in the "Share a Public IP" mode because I didn't realize the gateway was also issuing DHCP addresses. I cannot simply plug my TC into the modem in place of the gateway - both are required to access the internet.
Until today I had both routers using DHCP on the local networks they each created. Under that environment, I had finally configured Lion Server to file share (easy), manage network accounts (moderate), and serve Profile Manager (difficult). But despite my best efforts at mapping the ports on the Time Capsule, I just couldn't get the ports open using tools like canyouseeme.org, so the VPN was a no-go. That's when I realized the gateway could be a router too, so with some creative google searches, and extensive use of google translate, I was able to figure out how to open ports on the gateway. It does it pretty differently from the Time Capsule and other routers I've seen. It asks you define the host on the LAN (what i assume to be the target IP), the protocol (TCP vs. UDP), and then a range of ports for it to open. I plugged in the IP of the Time Capsule, opened all the UDP ports (since it was an option to just open all, and I figured 1) the TC would still protect my network and 2) it would just be a test), but I still couldn't see the ports as being open.
So then I got desperate, and I switched the TC back to Bridge Mode, reconfigured the Server and my MBP (my client Mac) to the new IP addresses being served by the Japanese gateway, and tried again. I think I reconfigured the DNS settings in Server Admin properly to account for the change in IP, and then updated the services in Server.app, but now I can't even get to my server homepage (the apple placeholder page) using either its IP or its .private domain, and to make matters worse, I STILL can't seem to get the ports open (yes, I changed the port mapping to send it directly to the server IP as the target after the change).
To add insult to injury, the wired ethernet connection I had been running from my TC to the MM Server is now reporting a cable unplugged (it's not), even when I plug it directly into the gateway, though I am able to connect wirelessly.
Does anyone have any idea what's going on? Why can't I get these ports open? (By the way, I called my ISP and they said they aren't blocking any of the ones I'd want to use for VPN.)
What is the *better* set up - using the TC as a second LAN, serving its own DHCP addresses, or using it in Bridge mode?
Why did these changes sever my wired connection?
I was getting even more problems (like loss of internet connectivity on all devices) using the TC in bridge mode, so I decided to go back to the dual network setup.

Hello Eric,
As I mentioned above.
For external Internet access, I would create a Generation
1 VM
and use 2 Legacy Network Adapters for
the Interfaces . Connect it to the External and Internal network, and then install VM Linux IPFire (How
to install) and
configure IPFire with RED and GREEN interface.
You don't need router or any firewall.
I have the same set-up that you are trying to do in your lab and it's working great.
All my VMs / computers on the LAN have their gateway the Linux VM.
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can anyone help - my mail on my ipad will not connect to the server. My internet access is fine. How can I get my email to connect to the server?

My ipad will not connect tot he server when trying to access my mail. This has been happening since last Sunday. Some have said it is due to the latest software update. I am able to connect to the internet.
I am not having this issue on iPhone.
I checked all the settings, the wireless router in my house and at work.
I have completed a hard reset of the device.
I had our IT guy at work look at it.
He said to contact Apple....
Any thoughts?
Thanks!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
Error: “Server Unavailable” when accessing Yahoo on iOS devices
https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
Unable to Delete eMail Messages
http://support.apple.com/kb/TS2475
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to delete ALL mail messages from iPhone/iPad in one step
http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
How to Attach Photos and Videos to Emails on an iPhone or iPad
http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
iPad Basics: Sending an Email With An Attachment
http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Send Multiple email Attachments from your iPad or iPhone
http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email! Mail Client with Attachments and Cloud Services
https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
 Cheers, Tom

IPS Signature Updates with no Internet Access

Hi all,
I've got a bit of an interesting dilemma that I'm hoping that someone could help with. I have two distinct networks: A "regular" network, along with a "secure" network. I've not been involved in the setup/configuration, but I've been handed some work to do now that has me puzzled.
The two networks are separated with a pair of ASA devices with IPS modules installed. User access to the secure side works by using Cisco VPN client, terminating on the ASA's, and once connected applications are delivered via Citrix. Management of the ASA's involves connecting via management VPN to the "external" ASA interface, connecting to a management server via Citrix and from there, management via MARS, ASDM & IME.
My issue is that I have been asked to configure auto-updates for the IPS modules. However, there is no internet access from the secure network. Servers on the secure side can request files, etc, from the regular side but there is no direct access can be initiated from the regular side back to the secure network. There are no ASA devices that are contactable/manageable from the regular side.
I've read that it's possible to somehow download updates from cisco.com via FTP or similar, but I fail to see how I can automate the process. What I originally thought to do was to install another copy of IME on the regular network, set up a dummy device and there on configure auto-updates, but unfortunately the IPS needs to be contactable for that to work.
Can anybody think of a solution that could make this work for me?

Hi Jennifer,
Thanks for that, but the instructions in that document appear to be related to updating a sensor from an FTP server where the updates have already been copied to it.
I have searched and searched, but I'm unable to locate the relevant location to download the signatures direct via FTP/SCP. I have attempted to locate them on ftp.cisco.com, but with no luck.
Regards,
James

Multiple Server with dedicated Internet access Network

Similar Messages

Maybe you are looking for