Multiple shipments for one delivery?

Hi,
Can multiple shipments be assigned to one delivery in standard SAP?
Regards,
Siddharth.

hello, friend.
there are at least 2 ways of looking at your situation:
1. you can use just one delivery document for many shipments (control will be outside of SAP and will require strict monitoring), or
2. if you are implementing LE-Transportation as well, you most likely will have to do "delivery split" so that one delivery can be broken up into as many deliveries as you need, where one delivery equals one shipment.
which of the above will be applicable for your needs?
regards.

Similar Messages

Multiple shipment agaisnt single delivery

Hi Gurus,
Can we have multiple shipment documents against a single delivery. If yes what are the instances where we can have this scenario. i.e. what we need to do in the config and also which process business need to follow to satishfy this scenario.
Thanks.
Laxmi.

Hi Laxmikanta,
Yes we can do multiple shipment for single delivery please follow the below steps.
1) Once you create a delivery go to t-code VT01N
2) Create the first shipment as you generally do.
3) If you want to create another shipment then you need to change the shipment type and create subsquent shipment.
4) You can create as many subsequent shipment as you want.
5) For this you need to remove the check mark from the delivery status " Do not select deleveries already in subsequent legs"
Once done you will be able to create as many shipments as possible.
Hope this helps.
Thanks and Regards
Rohit.

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

For one delivery generate several pick lists as per diff storage locations.

I want to print several pick list for one delivery as per different storage locations in SAPscript. i.e - for one Delivery if the storage location is defferent then several pick list will be printed

Mahmood,
If you are using the standard tcode/print program then u have to modify the program. after fetching all the item data of the delivery, sort the internal table with storage location and at every new storage location trigger the function module for calling the SAP Script or Smartform. By doing this every new storage location new form gets triggered.
regards..

Multiple Labels for One Order

Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

Hi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai

Multiple currency for one vendor

Hi,
Is there any way to have multiple currency for one Vendor?

Hi Siva,
Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display 'Add Purchasing Data' option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
Hope, it is useful for you.
Regards,
K.Rajendran

Multiple choose for one parameter

Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li<HR></BLOCKQUOTE>
you can do that by flowing the stap
at first you will write a select statement
select ...
From ...
where Style (colomn name) = &style1
then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
then you write in after parameter form trigger...
IF :P_style = 'All' then
:style1 := null;
Else :style1 := 'and style (style means your column name) = :P_style;
end if;
null

Multiple Vendors for one Document Number in BW

Hello All,
We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
All issues are coming for Process Key 1 only.
*For Example:*
Document: 9400000007
Schedule Line:1
Doc Item: 1
Vendor:
0010019229 - Incorrect Vendor
0010018962 - Correct Vendor
Committed Quantity: 0
Doc Type:
ZNB
ZNPP
Process Key: 1
Not sure how to upload screen shot.
Please suggest.
Thanks,
Vijay

Hi ,
Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
Regards
Rahul Bindroo

Multiple payers for one sold to party

Hi All,
Can we have multiple payers for one sold to party?
Thanks

Hi
Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
This Partner relationship is maintained in two places. They are,
> Customer master ( sales area data > partner function tab )
> Sales documents (at Header level and Item level)
In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
But in Sales document, you can have only one Partner for one Partner function.
So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
Then assign all those PAYERS in the master data of the Sold-to-party by going in the change mode XD02 and save it.
When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

Lightroom 5 slowdown, my post processing times have tripled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

On my contact list I have multiple names for one person

On my contact list I have multiple names for one person.

The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups. Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

PO Interface - Multiple shipments for a line

Hi,
Please could you anyone help me as to how to import PO lines with mutiple shipments?
PO_header_interface, po_lines_interface, po_distributions_interface are the tables am using for the PO Interface.
Since some of the PO lines has multiple shipments for a line, the Open Interface is failing.
I am in 11.5.10.2, any helps please.
Thanks
Genoo
Edited by: Geno on Aug 27, 2012 11:13 AM

Hi Genoo,
PO_LINES_INTERFACE table has got LINE_NUM and SHIPMENT_NUM columns. If you have multiple shipments for a line (e.g. Line 1 got shipment 1,2 and 3), you need to insert records as LINE_NUM=1, SHIPMENT_NUM=1, LINE_NUM=1, SHIPMENT_NUM=2 and so on.
Thanks,
PS.

Multiple shipments for one delivery?

Similar Messages

Maybe you are looking for