Multiple single values for a BW variable

Hi
If we have more than 1 default value(multiple singe values) for a variable , the values
will be stored in which table.
If anybody is having idea let me know.
Regards
(YUGANDHAR.P)

hi were you able to find this? i want to write an exit variable and i want to read all the 5 values stored in the default values of another variable in the exit variable.
please help.

Similar Messages

Passing multiple single values in Customer Exit Variables

Hi,
I have one requirement to Pass multiple single values in Customer Exit Variable.
If the user gives 2010 i need to get value previous fisacal year(2009),if its 2009, we need to get 2009.
Just requirement is like how to pass multiple single values?
Thanks.

Hi..
For this create a variable- Types of variable= Characteristics Value> Processing type as Customer Exit-->Reference Char as Fiscal year..
Try this code..
    when 'xxxx'.
      DATA: lv_zp0003_month(2) TYPE n,
              lv_zp0003_year(4) TYPE n.
      CLEAR: lv_zp0003_month, lv_zp0003_year.
      lv_zp0003_month = sy-datum+4(2).
      lv_zp0003_year = sy-datum(4).
If the month is January the year is set to previous year
      IF lv_zp0003_month = '01'.
        lv_zp0003_year = lv_zp0003_year - 1.
       l_s_range-low = lv_zp0003_year.
Else the year is set to actual
      ELSE.
        l_s_range-low = lv_zp0003_year.
      ENDIF.
      IF l_s_range-low = l_s_range-high.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-high IS INITIAL.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-low LT l_s_range-high.
        l_s_range-opt = 'BT'.
      ENDIF.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
Hope this helps.
Regards.
AKG

Difference between Multiple single values and Selection option variables

Hi !
Can any one tell me the difference between variable types:
Multiple single values and Selection option?
I used each one of them for selecting values for a characteristic but could not notice a difference in choosing values.
Is there some difference in functionality or can they be used interchageably?
Regards,
Sri Harsha

Harsha,
When you go for slection option, in the variable input screen you will be having a button in the last where you can give your slections. There you can maintain either multiple single values and Multiple intervals or else not equal to also..
Just check out there... you will be having tabs for each..
Assign Points if it helps
Gattu

Multiple single value for default value?!?

Hi guys,
by making a characteristic value variable how can I add more than one value (not interval) for default value? I cannot even add more value if the char. variable represents multiple single values...
Thx.

Hi,
For that you can make use of customer exit variable.
else refer this link:[Variable with Multiple Default Values;
Regards,
Rajkandula

Multiple default values for Selection type variable

Hi all,
I am using Bex 3.5. I have a fundamental doubt while creating a User Entry, Selection Option, Optional type variable. I am trying to include multiple single variables in the default section, but it accepts only one. Is it possible to add multiple default values to the variable so that they show up in the selection screen when we run the report via Bex Analyzer ?
Thanks for the inputs !
Regards
Snehith.

Hi,
In one of my bi7 reports, i remember i have given multiple default values in a single variable. For example i wanted to have multiple material types in my selection screen.
But i have to check out the type of that user entry variable.
Hope the above reply was helpful.
Kind regards,
Ashutosh singh

Passing multiple single values from R/3 BAPI to BW Query in VC

Hi Experts
I have a VC model where I am calling an R/3 BAPI which is returning a table of customer accounts. I'm trying to go directly from that BAPI to a BW Query and pass the table of accounts into the BW Query.
The BW Query has been set up with a variable to accept multiple single values for accounts, and I have mapped the correct output field from the BAPI to the correct input field on the Query.
The BAPI does not seem to be passing the table of accounts into the Query. If I hard code a single account in the mapping of the BAPI to Query call, the Query successfully returns the data I expect.
Can I pass a table of accounts to a BW Query in this way?
Many Thanks
Tom

Hi
Have you tried with 'Group & Combine' operator. Just add this operator & join your BAPI & BI Query to this. Then in ths configure of this oparator select the 'Accoount' field & gourp the data accordingly. Also specify the aggregation if required. & in the table/chart after the operator select the fields which you want to show.
I hope this is what you are looking for.
Regards
Sandeep

Passing multiple single values to a Planning Sequence

Hi All,
      We are using BEx Analyzer for planning. We are passing multiple single values for a single variable , to a IP-planning sequence. Planning sequence is only taking the last value passed and ignoring the rest.
Multiple variable values are passed as below:
Name                            Index                 Value
VAR_NAME_1     1     ZCC
VAR_LINES     1     5
VAR_VALUE_1     1     A10000001
VAR_VALUE_1     1     A10000002
VAR_VALUE_1     1     A10000003
VAR_VALUE_1     1     A10000004
VAR_VALUE_1     1     A10000005
These cell references are passed to "command button" through the "Command Range" property.
The values are calculated correctly but for only one Cost center (last one in the list) , In this case only data for the Cost Center "A10000005" is processed and rest of the cost centers are ignored.
What am I missing here? I appreciate your help.
Patch Levels:
SAP GUI 7.10 (Patch 16)
BEx Analyzer 7.X SP 12
Thank you,
Math

Hi Indu Sharma - I have tried several combinations, but did not work.
VAR_VALUE_1
VAR_VALUE_2
VAR_VALUE_3
VAR_VALUE_4
VAR_VALUE_5
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_EXT_1
VAR_VALUE_EXT_2
VAR_VALUE_EXT_3
VAR_VALUE_EXT_4
VAR_VALUE_EXT_5
Thank you,
Math

Does 'Multiple Single Values' work in BOBJ 4.0 Webi?

Experts,
We have a BOBJ 4.0 environment. We have a BEx variable defined as 'Multiple Single values' in BEx, so that the users can enter multiple materials at the same time to query as the input. The materials are like 02.200.100, 02.100.105, 02.100.402S etc.. In the BOBJ Webi prompt filter section, for the material, I am not able to input multiple single values for the material. I get a 'No values to display' message in the prompt section itself when I try to enter multiple materials separated by semicolon.
The users have around 500 different materials for which they want to see the data at the same time. They have this materials separated by semicolon in excel, and they want to copy that and enter this information in BOBJ prompt section (where it says to enter the values). I tried separating the materials by semicolon, comma - nothing worked out. When I enter each material individually, and search it with it key, I am able to see the material. So, doesn't 'Multiple single values' option work in BOBJ? I was able to see the data for those 500 materials each separated by a semicolon using the multiple single values option through BEx Analyzer and Portal. Isn't the same functionality provided by BOBJ?
Please find below my BOBJ prompt screen summary. Since 'Multiple single values' option was not working, I changed the BEx variable to 'Selection Option' in BEx, so in BOBJ we now have a 'Start Value' and a 'End Value' in BOBJ. Still my question is, whether BOBJ supports multiple single values option, so that the users can enter multiple values as input? The users want to enter the multiple materials in the "Enter Search Pattern" bar in the attached screenshot. Please let me know if this is feasible
Thanks for your time. Points will be rewarded!
Thanks,
G.

Hi Goutham R,
As of 4.0. it was by a limitation.
I have read some where that some users were able to meet the requirement by putting a semi colon at the end of each value in a excel and feeding it to the prompt but seems like you have already tried that.
Please see if you put a vote here in this link:
Selection option variable not behaving the same way in WebI : View Idea
But I think this requirement can be met in Analysis edition for OLAP.
BR
Prabhith

Interval selection and multiple single values in WAD Graphs

Hi ,
I am developing a Web Application Designer Graph by combining multiple reports. I have 0CALMONTH,Country as my variable selections. By default I am able to select only single values (January,Feb etc.) But I need to select intervals(From-To) for 0CALMONTH and Multiple Single values for 0COUNTRY .
I found the below link to use intervals by generating javascript
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f5daaddfdb4c60e10000000a155369/frameset.htm
But the issue here is, I am not able to change 'From' value i.e. according to this document , Interval start is to be fixed in the script and I cannot change it later .But I want to change the interval start any time later. I am not sure how to achieve this using this option. Also I want to use mulitple single values variable for Country .
Kindly let me know if there is any other possible options or work-around available.
Thanks for your time.
Thanks & Regards,
Raja.

Hi Janine,
Thanks for your reply.I am using 7.0 Templates.Sorry to miss that part. I think I need to explain the issue little more . I am developing a Chart using Web Application Designer. My Chart should be having the Variable in the top of the page and I can able to see that variable . Even I am able to change the values after the execution. But this is working fine only for the Single values, for ex. I can change the selection from June to July in the Chart and I am getting the correct result in my chart based on the selection .
But the issue is ,I need to select Intervals for the month .Even though I created another variable with the option 'Interval' in the Query Designer , it is not showing the interval screen (From..To) ,instead still it is showing the single values option. I am using two different variables for these purposes and everything is correct with the query designer query. I am able to see the variable in the template,but I am not able to choose the interval values (only the intervals ,single value is ok)
Thanks for your response
Thanks & Regards,
Raja

Variable multiple single value filled with customer exit used in FOX form.

Hi guys, I definitly need your help in the following scenario:
I have variable (multiple single value) filled in a customer exit and use it in web template. There it is used in the drop down box for selecting a special date in the analysis item. And there comes the first question:Why the results from the customer exit are written in the way "date1; date2; date3" in one line? They should appear line by line in rows. How can I influence that? I tried both data binding types, "variable" and "characteristic".
Now a button raises a planning function with a fox formula which should write the selected date (from the drop down box) in a customer table using "call function".
I always get the error, that I need to restrict the variable to "single value". Why do I have to do that and if necessary how can I do that? Other planning functions without the fox formula also work properly with using the selection from the drop down box.
I appreciate you help.
Kind regards, Anja.

Hi Vamsi.,
Try this code.
WHEN 'PREVIOUS_YEAR_1'.
IF I_STEP = 2. "after the popup of user entry
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCURRENT_YEAR_PERIOD'.
break-point.
IF SY-SUBRC EQ 0.
WA_YEAR = LOC_VAR_RANGE-LOW+0(4). "Year
WA_MONTH = LOC_VAR_RANGE-LOW+5(3). "Period
WA_YEAR = WA_YEAR - 1.
CONCATENATE WA_YEAR wa_month INTO WA_FISC_PERD .
CONCATENATE WA_YEAR WA_MONTH1 INTO L_S_RANGE-HIGH .
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
ENDIF.
ENDLOOP.
endif.
Assing points if it helps you.
-- Selva

Subject: BW Query Variable – Multiple Single Values

I have set a characteristic variable on process chain id. In General tab, Variable is u201Cprocess by manual inputu201D.
In Details tab, I set:
Variable represents Multiple Single Values, Variable is ready for Input
When I run my query, I can select multiple process chain ids. Problem is query returns process chain information for only one value (first value entered for process chain id in multiple selections. I have verified process chain information exists for all the multiple values.
Appreciate any feedback.

Thanks, I do not find any other restrictions. If I simply remove the variable which lets me spacify multiple single values, I see
all the process chains. When I add this variable to query under retsriction and run the query, I see pop-up and I can enter multiple values, but only first one is being searched. There is probably some setting in variable definition somewhere that it only processes first value.
Is there a way in RSRT to show me entire ABAP code of the query.
I ran RSRT set some break points but it is kind hard to troubleshoot. If I had the entire code, I can try to understand what is being done.

TextEdit for Multiple Single values

Hi,
I have a requirement to use the select option. But select option implementations
looks very complex for me. So i am using textEdit for collecting multiple single values. Like sales order numbers need to be collected in search page to display the details in next page.
   How should i restrict the user to enter 10 degits in each line and i should i collect the each line into a range so that i can use the range variable in select statement.
Basically i am looking for splitting the continues string with newline and carraigereturns characters into a internal table.
I need to write code in onInputprocessing event.
thanks for the quick response.
Regards,
Prav

hi
use this in oninputprocessing
DATA textedit TYPE REF TO cl_htmlb_textedit.
CLEAR textedit.
textedit ?= cl_htmlb_manager=>get_data(
                                request = runtime->server->request
                               name    = 'textEdit'
                               id      = 'risk'
CLEAR risk.
IF NOT textedit->text IS INITIAL.
risk = textedit->text.
ENDIF.
regards saād
reward points if helped

How to avoid SYSTEM_NO_TASK_STORAGE with multiple single values variable

Hi experts,
I am trying to do a distribution with reference data standart SAP function.
Fields to be changed:
ZPDHIER2 (Economic Group II)
ZPDHIER3 (Economic Group III)
ZPDCLIENT (Client)
Fields for condition:
KEY FIGURE NAME
Fields for reference:
KEY FIGURE NAME
ZPDSTATUS (Status)
FISCPER3 (Fiscal Period)
The parameters group is like:
Fields for condition:
Key figure: ZM_070 (one of the key figures)
Fields for reference:
Key figure: ZMONT_TN
FISCPER3: 001
Status: DE
- "Only distribute not assigned" is checked
I do not want the data to be distributed by any ZPDHIER2, ZPDHIER3 and ZPDCLIENT so I have restricted these characteristics in the planning level by some variables. These variables are user exit type and return multiple single values.
The issue regarding this message is that when I execute this function, depending on the size of the data brought by ZPDCLIENT user exit variable, this dump might or might not occur. As for the testing I've done, i realize that if the number of clients exceed 500, dump will occur.
This multiple single values variable (or any other solution) must be prepared for 3900 clients, and this number is expected to increase.
Anyone have faced same problem?
Hope you can provide me some help regarding this issue.
Tanks in advance,
André Oliveira

Hi Wadih saad,
I think the memory is not suffcient to hold the load. Check your swap space and memory during the client export and also check whether there is sufficient space in the hard disk to hold the export files.
You must have calculated the client size by using the test run. This size must be available as free space in hard disk to do the export.
Make the available space and do the export it will work.
Regards,
Maheswaran J

Copy using Variables with multiple single values in BEX

Hi,
I have a requirement wherein on executing the planning function, the system should take the FROM and TO values of 0FISCPER and copy the data accordingly.
Source variable is 'Single Value'.
Target variable is 'Multiple Single Value'.
I tried to give the Command Range as below:
$A$30:$C$31.
The button sequence is as below:
VAR_NAME_1      0         ZFISCPER
VAR_VALUE_1     0
VAR_NAME_2      1         ZFISCPER_M
VAR_VALUE_2     1
In the Analyzer, I entered the values as
In A30, VAR_NAME_1     0     =C20
In A31, VAR_NAME_2     1     =C21:C24
The values that I entered are as below:
C20 =   2007001 - Source value
C21 =   2007002 - Target values
C22 =   2007003
C23 =   2007004
C24 =   2007005.
The problem that Im facing is the system is unable to identify the multiple values that I enter for Target Fiscper and it displays as :#VALUE!
How to enter multiple single values and reference them accordingly?
Rgds,
Shyam

Hi,
I have tried to enter multiple single values as below:
VAR_VALUE_1     0     000 - Source
VAR_VALUE_1     1     003 - Target
VAR_VALUE_2     1     010
VAR_VALUE_3     1     080
VAR_VALUE_4     1     099
When I tried to execute the planning function, the system copies the data from version 000 to ALL versions irrespective of values entered above.ie:
1
2
3
10
80
99
100
110
Rgds
Shyam

Variable exit not taking multiple single values...urgent pls

Hi BW Guru's
I have created an variable exit where the variable represents mulitple single values.
In the customer exit when i trying to populate mulitiple values and move it to e_t_range it is not taking multiple values. I have also observed that it is a line item type. I want to know if there is anyway out since it is an urgent requirement. Any help would highly appreciated. I shall also award points accordingly. Thanks.

Hi Anil,
Thanks for your prompt response.
I guess i am missing out some thing.
The scenaio is like this I want to hard code some values which have to be removed from the selection hence I have created the variable with multiple single value variable and I have removed (unchecked) ready for input as it is not required. After your suggestion I have also made it mandatory but after running the query I am getting a message Abort no value determined. I have written this code under if i_step = 1.
My code goes like this.
DATA: BEGIN OF I_SO_VENDNO occurs 0,
        SOURCSYS TYPE /BIC/TZSO_VEND-/BIC/ZSOURCSYS,
        ZSO_VEND TYPE /BIC/TZSO_VEND-/BIC/ZSO_VEND,
        TXTMD TYPE /BIC/TZSO_VEND-TXTMD,
      END OF I_SO_VENDNO.
select * from /BIC/TZSO_VEND into table i_so_vendno.
loop at i_so_vendno where TXTMD CS 'GREAT LAKES'.
      l_s_range-low = i_so_vendno-zso_vend.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'NE'.
      append l_s_range to e_t_range.
      clear: e_t_range, l_s_range, i_so_vendno.
endloop.
Want to know if I am missing out something.
Thanks.

Multiple single values for a BW variable

Similar Messages

Maybe you are looking for