Multiple sites; sites bypassed when SSL is activated: solution:restart SSL

This is a tip.
I had a problem that Leopard bypasses a site when it was SSL activated and one make changes in any other site (as example adding another site,etc). In my case, the SSL site worked well, but when another site was added and if I press the SSL site, the result page was the new site.
(but in the listing the order of the sites was: SSL, new site, *), also I checked the dns and restarting the web services with out any solution.
The way I corrected it was:
1)Disable SSL in the SSL site (deactivate SSL),
2)restart the web services
3)Restart the SSL site (activate SSL)
then you can access the SSL site without being redirected to another site.
some Leopard things...

Two different sites, one with .info and one with .net. One works perfectly without issue and they each have similar settings in Server, however one only seems to want to work using https prefix. The sites are both different and therefore needs to be accessed with http at this point. The problem is when I go to http://example.info it takes me to http://example.net which is not what needs to be occuring. This occurs internally and externally. Before the move I did my server was doing DNS as well and those settings have not changed or been modified except when I had to change their outside static IPs.

Similar Messages

Multiple sites, publish one at a time?

I have multiple sites, but when I publish them they all publish together. Can I just publish one at a time??? If not, this program is not very good..

I just want to select one SITE and
upload it, not have all the others upload too. Anyway
to get aroud that?
It should not upload a site that has no changes. But there is no way to avoid uploading changes, unless you want to start using separate Users/username/Library/Application Support/iWeb/Domain files for each site.

How to send right CallingNumber when Cisco CER is down for multiple sites

Hi,
Cisco ER 7.x system with centerized CUCM 7.1(x) cluster for multiple sites over WAN, where each site has local voice gateway (MGCP) with T1/PRI connected. All the phones are DIDs.
When considering 911 calls redundancy when CER is down, Cisco ER administration guide recommends using Local Route Group for 10911 or something else route-pattern on CUCM which is used:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cer/7_1_1/english/administration/guide/e911plan.html#wp1062106
To configure LRG, follow these steps:
1. On Cisco Unified Communications Manager Administration, configure the LRG route pattern and route point for 911 emergency call routing.
2. On Cisco Unified Communications Manager Administration, configure any destination route point that is being forwarded in the emergency call route point with the LRG route pattern.
3. On Cisco ER Administration, configure the LRG route pattern as the default ERL.
My question is:
On the 10911 route-pattern using LRG, how can configure the each site ELIN number as the calling number on the route-pattern which is normally assigned on E911 partition only? or do I need change MGCP to H.323 in order to achieve this purpose?
Do I miss something?
Thanks,
JJ

Hi,
I am not sure with in obiee it is possible? But third party tool we can do it.
Site scope monitor tool is there, what this tool will do it will send the alert mail to respective team whenever services are down.
For more information google it? You can get better idea.
Thanks,
Satya

I am unable to use Muse in-browser editing. I have an active site, but when I enter my site plus /admin, the graphic dots move but the site goes nowhere and I am never given a chance to enter my email and password. I would greatly appreciate any help. I a

I am unable to use Muse in-browser editing. I have followed the activation instructions both in Muse and invited users. I have an active site, but when I enter my site URL plus /admin, the graphic dots move but the site goes nowhere and I am never given a chance to enter my email and password. I would greatly appreciate any help. I am thanking you in advance, Bleu

I'd keep trying the other way. You may have hit it when BC was doing an update or something. If it works one way it should work the other way. But sometimes BC can be kind of temperamental and you have to do a little dance or something to get it to work. But it generally comes around and fixes itself in short time.
Have you tried the other way again?

Since upgrading to OS X 10.8.2 a few days ago, Safari will suddenly zoom in on web pages (happens on multiple sites) when I scroll or move the mouse -- any one know why and what to do about it? Thanks.

Since upgrading to OS X 10.8.2 a few days ago, Safari will suddenly zoom in on web pages (happens on multiple sites) when I scroll or move the mouse -- any one know why and what to do about it? Thanks!

It really isn't a well thought out 'gesture' when a normal scroll action can result in an unwanted zoom but disabling SmartZoom wasn't an option for me—one of those with eyes that tire easily when reading very small text on a 27" display.
For a while I used command-+ and command-'-' to read small text but that isn't supported in some apps and for Safari it often leaves the browser in an less than perfect state when moving to the next page. I also tried option scroll to zoom the whole display but that was not desirable, either.
I finally settled on leaving SmartZoom enabled and remembering to double tap with one finger whenever the undesired zoom happens. It happens so often that the double tap is almost a reflex action for me.

I downloaded Mozilla when I first got my Mac.Is it a better than Safari?I tried Safari and I did not care for it. So can I still use cmd t or cmd n for opening multiple sites?

I downloaded Mozilla firefox when I first got my mac as I did not like safari.Thah being said,which is better? and lastly can I still use cmd t or cmd with firefox for opening multiple sites? Thanks,Ralph

You need to visit this page and learn all about Firefox's awesome features, don't ignore the add-ons, toolbar>customize or persona's they really personalize Firefox.
http://www.mozilla.org/en-US/firefox/central/
Also you need to make sure your browser plugins are current for your whole machine, Safari included.
http://www.mozilla.org/en-US/plugincheck/
I hope one day Apple will make Safari as awesome as Firefox and allow the choice it has, but not today.

The countdown timers at File Storage Locker sites (fileserve, bitshare, freakshare, etc) will no longer countdown if not the active page (Since upgrading to firefox 5.0). How do make it countdown when not the active page?

Since upgrading to firefox 5.0, countdown timers at the various file locker sites will no longer countdown when the page is not the active page. I am sure it is not a site-side change as ALL the sites countdown timers freeze when not the active page. This has only happened since the upgrade.

For reading only as Bugzilla is Not a forum.
[https://bugzilla.mozilla.org/show_bug.cgi?id=652472 Bug#652472] - Higher setTimeout/setInterval clamping in inactive tabs breaks countdown scripts
In mean time you can try opening those links in a new window instead of a new tab.
Not all sites are affected as sites like Megaupload, Filesonic, depositfiles, Rapidshare work fine.

Customer is getting created multiple tims when it has multiple sites

Hi,
I developed customer conversion.
when I load data through conversion in R12 Customer is getting created multiple tims when it has multiple sites.
what are the things I have to take care to prevent this.
Please suggest me If any one has Idea.
Thanks & Regards,
Narendra.

Hi Gabriel,
Thanks for taking time to reply to my post.
When one of my collegue giving the print, there is only one spool which is getting created, but when I run the program there are multiple spools are getting created.
-Pradeep

FireFox crashes on multiple sites, when 1st opened, also has over 4 or 5 different FireFixes in the Task Manager running how do we fix this?

My PC, my wifes, dads, moms and kids PC all do this since the 14 update. I have updated ALL add-ons even removed some, also updated Flash and other programs, it will do this every time I open FF. Or if it does not crash rite away it will show 5+ of them open in Task Manager. It does this on multiple sites, I even reset FF 2 or 3 times, tried different start pages from Google, to Yahoo, to MSN even private sites I frequent it does not matter what I do it constantly crashes, can someone please fix this or figure out why tons of people are having this problem. This is very upsetting already upset about this darn idea of putting in FaceBook and crap like that integrated into FF that is a stupid move on its own seems more of a sell out I would expect that from IE but not from FF whom we have trusted for years.

You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes

Multiple sites-Use both versions?

I have 3 domains, removed into separate folders. I have backed these up.
1. School domains-1 active classroom site/1 from last year I copy entries from
2. Teacher Support domain-a site I created to help teachers at my school
3. Personal site with photos
Using “Open With” I upgraded the personal site to 2.x. IWeb 2.x is great for photos. When I upgraded the domain using 2.x it works fine.
I can’t convert #2 above, as it is made with an 11Mystics theme and the blogs just disappear. The entries show in iWeb, but the main blog page with the RSS feeds is empty. I have yet to try deleting the RSS folder and republishing. Using 11Mystics beta for my theme and installing themes and thumbnails doesn’t work well.
I would be happy leaving #1 & 2 in iWeb 1.x, but when I publish one will render just fine in the browser and the other always gets the error page. Sometimes they alternate.
Has anyone been successful publishing multiple sites using both? Are there any 11Mystics users who have been successful in upgrading? I’m using Aerolite Silver. Thank you for your time.

I'm publishing to .Mac Thanks for the information. I may give it another try. I effectively do as you do. I have an iWeb folder that has folders for each website. One will have a regular 2.x domain - the other will open the domain with iWeb 08.
I'd convert everything, but I put so much work into my resource site (06 version)
http://web.mac.com/dontruett/iWeb/RSTchr/Home/Home.html
I could duplicate all of the theme pages I tweaked and use them in 2.x, but for the disappearing blogs. I may try deleting the RSS folder from iDisk and publishing again in 08. It's just so time consuming to experiment with 3 domains, then revert back, as publishing takes forever.

Managing multiple sites in different iWeb versions - PLEASE HELP!

apnewbie/cyclosaurus/roddy/old toad (and any others more knowledgeable than i):
i've run into a bit of a pickle. i am hoping someone can help straighten me out. i am about to jump out of a window. here's the rundown:
(for starters, i have a .mac account and am publishing to .mac.) i created a site in iWeb 1.1.2 on my work computer (mac book pro). worked great, really lovely. thought to myself, "hey, i'd like to create another site from home, but i don't have iWeb at home (powerbook G4) - i should buy iLife 08 so i can build these things from home and not have personal files on my work computer."
so: i had a site that i created within 1.1.2 with files written to iDisk. i purchased iWeb 08 and would like to have another site, but this one is being created in 2.0. i also am using a personal domain name this time around bought with google apps and hosted by godaddy. i published the new work in progress for a test run and...you guessed it...my original 1.1.2 site was rewritten by the 2.0 site. and the 2.0 site comes up as the standard google search page for domains that aren't up and running. whooopsie.
sorry for the lengthy intro, but that's the background. i guess my specific questions are:
1) i want to be able to maintain multiple sites from iWeb 2.0...can i open my 1.1.2 domain file in 2.0 and successfully bring that site into 2.0?
2) what is the most efficient and easiest way to get both of these sites running in 2.0? right now i have two domain files (created on two different computers).
3) for domain management, is it best to move from the iWeb folder in my home library to different folders (one for each site, with separate domain files, and my 2.0 domain file is NOT called domain, it's the name of the site) to another location? (and of course, i will back these up just in case.) and when i want to update a site, i just open that individual domain file, right? or will these sites publish over each other?
please help. i am at my wits end. i'm sure this is a relatviely simple issue, but i'm new to iWeb.
thanks, thanks, thanks for your help guys.
joojy

joojy,
Welcome to the forums!
First of all, your original 1.1.2 site may not, in fact, have been overwritten. It is quite possible that the site remains in it's position on the iDisk, Web/Sites/iWeb/YourSite, but because you published to the iDisk (.Mac) from 2.0, a different index.html file has been placed in the root level Web directory which is causing the 404 error. Navigate to the directory on the iDisk, using the Go menu in Finder, and look to see what is actually there. Follow this path:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSiteWillBeHereIfYourLuckIsGood
If your site is there, great; if it isn't, it's not really a problem because hopefully you still have the Domain.sites file on the MacBook Pro and you can republish it if necessary. If it is there, you can modify the index.html file on the iDisk using a text editor and get your url redirected back to where it should be.
Second, do not open your 1.1.2 Domain.sites file with 2.0 until you have a backup of this Domain file. External drives are best for this. Assuming the backup is in place, launch 2.0, choose the Domain.sites file, and click on "update". It will be updated to a Domain.sites2 file. If the site looks ok then continue on with editing/publishing.
Skipping to question (3), by all means, abandon the default location of the Domain.sites file in the Home folder's Library and get accustomed to keeping your Domain files in their own, respective folders. When you want to open one just double-click it.
You are going to encounter difficulties publishing multiple sites in 2.0.2, unless you keep all of the sites in a single Domain file. 2.0 is publishing to a different directory on the iDisk than 1.0; it publishes to /Web/Sites/, as opposed to /Web/Sites/iWeb/. Publishing a site from a separate Domain file erases previously published sites. I have been able to publish multiple sites, from multiple Domain.sites2 files, by mounting the iDisk and actually moving the Site folder back one level, into the root Web folder, and then publishing. When finished, I move it back again. If you have RSS feeds you will probably get a 'file in use' error. The alternative, (other than keeping all sites in a single Domain), is to publish the site to a folder and then manually drop the Site folder into the Web/Sites/ directory on the iDisk. Of course, some .Mac functions are lost when publishing this way.
Work through this info and post back.
-Mark

Multiple Domain files, Multiple Sites, Publishing Problems

I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

Mark:
I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
Do you Twango?

How do you setup multiple sites to allow for code promotion?

I am somewhat frustrated with the single site flow of the Dreamweaver Site Manager in helping me manage a full development to production code cycle. Ideally I need to have multiple sites managed by Dreamweaver that are just different stages in the code lifecycle. Currently DW only supports local_file -> production. Instead I need (and this is sort of standard for software product systems) to have my local sandbox, a test site, a beta site and a production site.
In the normal dev cycle I would work in my sandbox and have DW synchronize with my test site ( allows scripts that need a full server to be tested in case my local machine is not running a full server ). I can do this today with DW. When I am ready I want be able to have DW synchronize with my beta site (might very well be on a different server via FTP) so that my users/customers can review, test and approve the changes. When everyone has signed off I then want DW to promote this code to the production site.
Now I can do this manually but DW seems to have 95% of the capability in place (mostly the synchronization logic). Is there a way to have it also manage/synchronize the beta and production sites?
Thank You

Richmaster wrote:
turingtest, I do have a couple questions.
Number one, does everyone in your family only sych their ipods from only 1 computer? If everyone only uses itunes from 1 computer I can see how that will work. But what if kids want to use itunes for windows? Will "Home Sharing" allow all their music purchased on the MAC, to be also displayed on their itunes for windows laptop? I noticed you have PCs and also an ipad. How do you manage your family's music on these devices?
Also, how did you first get everyone's music library into their own library? Drag & drop? Is the "grouping field" you mentioned under "view", then "view options"? What does this do?
Thanks.
Sorry I missed your post earlier. Normally I follow up on any replies. This one must have fallen off the page on a busy day.
As my kids have left home I have created for them a complete clone of the familiy library, then deleted the tracks from it they don't want. Over time their libraries will divirge, but if needs be they can still update their devices using the library at home. Handy when eldest's kit was stolen.
Grouping is just another property, useful because it isn't generally overwritten by other software but is stored in the tags, so preserved when you copy files from one place to another. You can make the column visible and edit for multiple tracks in Get Info. Some software calls the same field "mood" or "sub-genre". iTunes has a specialist purpose for it generally used with classical music, but it doesn't seem to work very well for that and I don't use it that way.
tt2

Noob needs help with hosting multiple sites

Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999

{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest.

Best Way to Sync Lists Across Multiple Site Collections?

A quick query I'm hoping someone might be able to help me with...
Within our university intranet I am assigning each department a team site within its own Site Collection. So that departments can associate Document Library files with a set list of academic courses, I created a custom dropdown field and deployed it as a Feature. While this worked within SharePoint, when you attempted to set the document properties within the Microsoft Word environment the custom fields were rendered as empty text boxes (meaning that staff are no longer restricted in when information they can enter).
To get around this I'm considering going back-to-basics and creating a Custom List, populating it with the titles of our academic courses, and then assigning it to a Document Library via a Lookup Field. I know that Microsoft Word will then correctly display the metadata dropdown.
As I am using multiple Site Collections, I'm unsure of the "best" way to proceed.
I've already written a Console Application which can create a Custom List within a targetted site and populate it with the contents of an XML file - but I would need to run this every time I created a new Site Collection and what would I do when I wanted to update the contents of all the lists?
Other than modifying my Console Application to loop through all instances of the Custom List within Site Collections and sync it to the contents of the XML file, is there another (better) option that I am over-looking?
Its such a shame I can't create cross-collection Lookup Fields within all of the Site Collections that point to a single top-level list.
Many thanks.

My instinctive questions drifts towards why you have different site collections. If all the sites were sub sites within the same site collection, a global field would solve the issue quite nicely.
If you have legitimate reasons for keeping the sites seperated into separate site collections, I would look at using an Event Handler to trigger updates to reference values in each site collection, be they global fields or lists. Then if you wish to update the values, you only need to update the trigger list to propagate the updates across your site sollections to all your sites in question.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog

Multiple sites; sites bypassed when SSL is activated: solution:restart SSL

Similar Messages

Maybe you are looking for