Multiple size and format exports

Is there a way to hit the export button on a selection of images one time and produce multiple sizes and formats of each image? Maybe an automator script.
It would speed things up if you didn't have to go back and choose a different format from the drop down list and start the export over again for each different size that you need.

I was just doing something similar recently, I agree it would be nice to have something easier to do just this...
I think the simplist way would actually be to write an export plugin using the new Export API, it would be truest to what you are probably trying to produce (I was creating a series of different resolutions of the same image for a web page). It would be trickier though.

Similar Messages

  • Error in Portal Navigation - Font Type, Size and formatting.

    We carry through all the tips postadas in the SDN to solve this problem, however we the same have some different stations with problem.
    We are using the Bi 7,0 Portal, and we are with problems in the layout: <b>Font Type, Size and formatting</b>, and WEB.
    Somebody has some specific tip for this problem?
    Regards,
    Sbrissa.

    Hi Biroj, thanks, I´m check the error continues...
    Thanks,
    Sbrissa.

  • Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

    Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

    Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
    The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
    Sorry
    This feed does not validate.
    line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
                  ^
    line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
                   ^
    line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
    <itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
                         ^
    In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
    Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
    line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
                                                 ^

  • How do I change the font, size and format of tab labels?

    How do I change the font, font size, and format of a tab label?  Can I replace the text label with a gif image?
    Thanks

    barney99 wrote:
    Double clicking on the tab sends me to the block diagram.  Not sure how I change the font like that.
    I didn't say double-click on the tab. I said double-click on the tab selector's text. You need to use the "hand" tool if you have "Lock automatic tool selection" off in your LabVIEW options. 
    Attachments:
    Example_VI_FP.png ‏3 KB

  • Multiple sizes and multiple quantities of an item

    How do I create a shirt order form where someone can order multiple sizes and multiple quantities of an item?

    Hi,
    There’re some order templates, Shirt(Clothing) Order Form,  that might be meet your request. Or you can design a custom form according your requirement if you’re a form author or coauthor. For your case, when you design the form, you can choose the multiple choices, single choice, or other fields, etc.  And you have to enable the payment under options tab, and assign fields as a purchase fields. At the same time, you can share the web form to the form filler to make an order.
    Thanks,
    Guanshuai

  • Is there a way to select multiple sequences and batch export them using the same settings in CS6?

    I am a current Final Cut Pro7 user and looking to switch over to Premiere Pro CS6.  We edit approx. 100 short (15 sec.) videos daily, and then select them all at the end of the day and batch export them over night using the same export recipe for all. I have having trouble finding an easy way to do this in Premiere pro CS6, as command +E is grayed out if i select more than one sequence at a time. 
    so far, it appears that i have to select each video individually and manually set encoding recipe and export location for each....  Not only would this be terribly time consuming, but it leaves a lot of room for error and missed videos.  I thought i would be able to send all of the sequences to Adobe Media Encoder,  but i dont see that option either.
    Any suggestions/
    thanks!

    Open Media Encoder and add your Sequences:
    File > Add Premiere Pro Sequence
    Navigate to your Premiere Project and select it in the list.
    You can then select multiple Sequences from the Project (Ctrl+Click)
    and load them all at once into Media Encoder and apply
    the same encoding preset to all Sequences at the same time.

  • Image size and format for IMovie

    I am trying to make a short stop motion animation in IMovie. I have made my images in Adobe illustrator. I transfer the images into IMovie as JPEGS.the images, which are basically line drawings, look sharp and clean but as soon as you watch them as moving pictures they become broken up.
    what am I doing wrong? does this have to do with my image size or format?

    iDVD will try to downsize the image to work, but your TV often will overscan with the result being edges clipped off. The amount of clipping can vary, so the "TV Safe" settings will typically be the center 80-90% of the image. So, if you add a border that makes the image 10-15% larger, that should display the whole image. For example, if you had a 150 dpi image that was 640x480, you could put a 10% border on it so the final image was 704x528.
    John

  • Cross Tab Size and Formatting

    Good Day To All,
    I have 3 Cross tab that fit perfectly on one page, but when it was created the user used an incorrect field as its columns.
    When I change the column field to the correct field the Cross-Tab increases in size shifting the last cross tab to another page.
    How can I keep the original size. I've tried To lock position and size but that does not work. I also tried using format painter but that only works on fonts size. I am unable to re-size the cross tab in design mode. Any suggestions would be appreciated.
    Regards,
    David

    hi David,
    unfortunately there are no properties in a cross-tab to keep it the same overall width if the number of column instances changes. the Size and Position dialogues for Width and Horizontal Position (X) also do not apply to cross-tabs.
    the only thing that you can do is to decrease the width of the column cell and if the output no longer fits in the width of the cell then you'll also need to decrease the font size.
    there is another workaround by limiting the number of records returned to a group. please see my blog post here in particular the section "Formatting a Cross-tab to Have N Rows & M Columns".  this is not an easy task either as the data coming in must be a precise match for the number of rows X the number columns that are required. this is explained further in the blog.
    -jamie

  • Display size and formatting

    My father, who is completely computer illiterate, managed to change the display on all three of our family accounts on our iMac. Whereas webpages and programs were once crisp and formatted correctly (ie the New York Times online looked like the proper newspaper), everything, from the font on the top bar to the icons at the bottom and fonts on webpages, is now much larger and out of focus. Safari windows are now too large to properly fit on the screen (usually the right side is cut off) and there are fewer tiled images on my background. I have checked everywhere in Preferences and in the online help- does anybody know how to restore the display settings to their defaults?

    Hi
    System Preferences>Displays>Display is where you can change the resolution of your screen.
    Also, you can zoom in on webpages & other windows by using your mouse's scroll wheel whilst holding down ctrl key.
    Have a look in System Preferences>Universal Access>Seeing & check that Zoom isn't activated (Cmd-Alt-8 is shortcut).
    Steve

  • When I put Pages in fullscreen my bar with fonts, size, and format disappears

    in old pages, in fullscreen i could scroll my mouse up and i would get the fonts, size, and formant, etc. bar. but now it just disapeares?  
                                                                     |
                                                                     |
                                                                    V

    Are other apps working fine in full screen? Just Pages?
    It is working for me, so perhaps a restart to see if that helps?
    But like many, I am sticking with the old Pages for now.

  • I used to be able to save/export from QT to custom sizes and formats

    Is that capability gone in the new QT. I can't remember it is was part of EXPORT or SAVE AS.
    Frustrated in not known how to do this...I need to.
    -bill

    V.K.
    Thanks for the reply BUT...there seems to frequently be BUTS...
    ++you need QT player 7 for that. it should still be on your computer in /Applications/Utilities.++
    I have SL as I said...I looked in both the Utilities and Applications folder...NO QT 7.
    Why would Apple remove this great tool from QT? Any other suggestions?
    Thanks, --bill

  • What file size and format show I ask someone to send me a movie in?

    A company is sending me a movie which they filmed and edited.I want the full edited movie so I can just extract scenes from it.
    What file, format and size should I ask it for in?
    Or would it be better for me to recieve it as a Mini DV and recappture it on my computer?
    I want the movie in as high quality as possible. Is quick time, 720x486, uncompressed, good? I don't want to sound like I don't know what Im talking about

    What file, format and size is it originally and what do you intend to do with it once you have extracted scenes?

  • Desktop Icon Picture size and format limit

    I'm pushing out a group policy to desktop but would like to know icon size limits and also what are acceptable formats. Currently using a 12k jpg icon that points to a URL and testing but don't get the picture.
    Setting is located:
    User configuration\preferences\windows settings\shortcuts\Icon file path

    Hi,
    >>Currently using a 12k jpg icon that points to a URL and testing but don't get the picture.
    Before going further, we can run command gpresult/h gpreport.html
    to check group policy result report to see if the policy setting got applied successfully. Besides, please make sure that users can successfully access the icon file. We can also check event logs in Event Viewer to see if some related events were logged.
    If we can't find anything wrong with above troubleshooting, we can use another icon to check if this is related to the icon itself.
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards
    Frank Shen

  • Multiple queries and formatting issues

    I am running a report with 2 queries in a csv format. It displayed the right format with one query but with the new query , I have all sorts of formatting issues. The data is displayed in random cells. Why would this happen? Any ideas?
    thanks

    Sripathy,
    No, the data is not mixed up. However, the data is displayed in random fashion. Data which should be displayed in one cell, is coming in 2 cells. Sometimes, it is skipping a few cells. It could be due to field widths- I tried changing the widths of the groups in the Data model and also in the layout editor, but nothing has worked so far. Does it not automatically adjust the width depending on the data. I have Vertical elasticity Expand and horizonta Fixed.
    Thanks,
    Srikanth

  • IPhotoBook Image File Sizes and Formats

    Morning (it is here in the UK!)
    Similar questions found on the forum - but not exactly what I need.
    Please may I ask for your help on the forum.  I notice 'Old Toad' in particular seems to respond to these types of enquiries!
    I've got an iMac - about four years old - with Mac OS X 10.6 and iPhoto 8.1
    I'm building an iPhotoBook (the Extra Large 13" x 10" Size) of Press Clippings which I'm scanning onto a PC, putting into Photoshop and then transferring to the iMac to create the Photobook.  Doing it this way as my Photoshop license is for my PC, plus my PC is newer. 
    Each of the two or three photobooks will run to possibly 100 pages - unsure what my maximum page count allowed will be.
    I'm scanning at 600 DPI using an A3 Scanner.
    Saving as a TIFF once I've created the layout of each page in Photoshop.
    So I'll end up with a series of pre-built pages for the 13" x 10" book ready to drop into iPhoto Book.
    Looking at my file sizes they're currently anywhere between 38 and 45 MB each.
    Am I going to run into problems uploading these?  Will Photobook be happy with my TIFF files?
    Such a vast project want to get it right before I end up going back over my initial work.
    Thank you in advance.

    Scan to tiff by all means and at a sRGB color profile, but output jpegs. There's nothing to be gained using the tiffs in a book. It's converted to pdf when uploading anyway. Most importing thing, preview the pdf before uploading. That's what your book will look like when finished.

Maybe you are looking for