Multiple songs within a chapter and continuous play from chapter to chapter

Hi,
Struggling with two features: I played the tutorials at iDVD but I could not find answers to these questions.
1) trying to get the DVD to continuously play all the different chapters without hitting the play button for each one.
Want to run in continuously for a birthday party so just want it to run.
Secondly. Some chapters have lots of pictures. How do I add multiple pieces of music to each chapter?
Thanks

1) trying to get the DVD to continuously play all the different chapters without hitting the play button for each one.
You have NOT created CHAPTERS - you have created a series of separate clips (or slideshows). DVD 'Chapters' are like chapters in a book - just entry points into longer content. There is no way in iDVD to like together such separate clips.
Secondly. Some chapters have lots of pictures. How do I add multiple pieces of music to each chapter?
It sounds like you are creating slideshows - is this correct? If so I suggest you create your slideshow in iPhoto or iMovie. This will give you many more options. Apple has tutorials for both iPhoto and iMovie that explain how to do this.
F Shippey

Similar Messages

How to delete multiple songs within playlist

Hi does anyone know how to delete multiple songs within a playlist on OS or Mac?? I have reached the limit in songs I can play offliine and would like to delete some of the songs that are on my playlist. For example the last 100 songs. I dont want to indiviually sit here and delete them one by one. Thanks Ray

On ios i think the only way is to edit the playlist by clicking on the three dots. I dont own a mac, but on windows you can hold control and select the songs you want to delete. Or select a song, go to the last song you want to delete, hold shift and click on the song.

Script single button to play frames, then skip some, and continue play?

Just as the topic says, I want to script a button to go to
and play through a motion tween, but then skip some frames to then
play another motion tween all in one button press. For example,
play frame 1 which plays the tween and ends at frame 10 (I have
that part down fine) but then for it to skip ahead to continue to
play frame 20 and then of course stop once it finishes that motion
tween.
Tried a few searches but its too many words to explain so I
wasnt finding anything. Its probably a simple command im just not
familiar with yet. Can anyone help?

I probably should have been more specific. I cant add
anything to the timeline because I have multiple buttons using the
first tween, which is a fade out. Thats why I need a script to add
to each button only to play through that first common tween, and
then skip to play an individual tween set for each button. Like
button 1 goes through the first common tween, a fade out (plays
frames 41 - 53) and its individual tween is frames 54 - 66. This
works fine of course because the tweens are next to each other.
Button 2's individual tween starts on frame 67, so it needs to play
through the common tween fade (41 - 53) skip Button 1's frames, and
continue play on 67. These buttons are located on frame 1 (main
menu) so is it even possible to script a button to do such a thing?
I figured there would be but nothing im trying or seeing online is
working. Heh... does this make sense? :o
The only other way I know it will work is if I copy and paste
all the information in the layers before each section but that
causes me to have to push a lot of information further down the
timeline, kinda making a big mess and causing me to rescript all
frames there.

AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly

I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
Audio breaks/stops and continue playing randomly when 'Ram Previewing'
It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
Steps to reproduce BUG / issue:
1. create a new composition with a length of for example 5 minutes.
2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
4. insert the wave file in the earlier created composition which contain the animated solid or video file.
5. Set the work area bar (preview range) for the whole composition.
'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
AE has to stop rendering because there is no more space available in RAM.
make sure 'from current time' checkbox is off.
6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
(less then the green cache indicator on the right side)
8. "Purge image caches" or "Purge All"
9. Ram preview the now smaller work area
10. listen to the audio. The audio breaks are gone! (***Workaround***)
Additional information:
I have the latest After Effects CS5 update installed (10.0.1.19)
This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver, ASIO DirectX Full Duplex Driver)
I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
Reducing the amount of RAM which After Effects can access didn't solve the problem!
System:
Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
I also turned off AVG Anitivirus and Windows firewall for testing without success.
AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
Any help would be nice!
Felix

Yep, I agree with craulmedia....
It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
I bumped up this post 2 times and thanks to craulmedia for the third time.
And now here is my fourth time *BUMP*
All I got so far is: "I saw your bug report it's in the queue"
Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
But it started out so good in the first time...
Last 2 things I want to add here:
1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max.

Is there a way to take a video pause and continue playing on same video so i dont have to start a new video on my ipad 2

is there a way to start a video on my ipad 2 pause and continue playing on same video so i do have to start another video

In I movie, load the player with your clip. Play it until the frame you want is in the viewing window. Then take a screen shot and the whole screen wil be captured and placed in the camera roll. You can then crop it down to just the picture, or portion of the picture you want.
Not elegant, but functional.

Transfer it to another PC (with ADOBE DOWNLOAD MANAGER), and continue download from it ?

When I download a file and stops at the half, may by
anyway(how?) transfer it to another PC (with ADOBE DOWNLOAD MANAGER
installed), and continue download from that PC ?

No. You must start and finish the download from the same PC.
If your connection speed is not adequate, I would recommend going
back to Adobe and asking for media to be shipped out.

Continue playing from before, switch off automatically

I'd like to use my iPod nano as my source of music in the car. I've seen quite a lot of car kits. The disadvantage I see with all of them is when you start the car you have to re-select your playlist and start the iPod playing and (ii) when you turn off the ignition you have to remember to turn the iPod off or it will keep playing and may have a flat battery when you come back.
Is there any way for the iPod to detect when power is available on the USB port and restart playing from where it was at the time it was previously switched off?
Is there a way for the iPod to switch itself off when the USB port is powered down?
Thanks for any tips.
Windows XP

Sorry you can't do what you want.
Ian

Shuffle and continuous play

I obviously don't understand how ATV2 using Home sharing works. I have my ATV2 setup to share my iMac's iTunes Library. It shows up fine on the ATV2. What I have not been able to figure out is 2 things:
1. How do I get a the ATV2 to continuous play everything in an album? For the life of me Ican't figure it out?
2. How do I use "Shuffle" it appears to always be on (arrows are crossed?) Can you turn it off? When I select shuffle withthe remote it starts to play one song but then stops (even though are more songs in the album, genre,etc.) What am I doing wrong?
I'm feeling pretty dumb about this thing?

Got it. Ihad unchecked all the Holiday Music so it wouldn't sync to my iPhone. re-checked them and it's all good.

Was playing game for months. Tonite, I went to play and it started me back as a new user. How do I find my player info and continue playing my origional game??

Was playing game for months, when I turned ipad on tonite and went to continue playing, it started me as a new user. My old achievements are still in game, but can only view them as the game recognizes me as a new user. How can I retrieve my player info to continue where I left off in game?

snozdop wrote:
If I bought a new iPad and wanted to continue as on the old iPad, I would setup the new iPad from a backup of the old iPad, thereby transferring everything from old to new.
Exactly, a full backup of the previous device would contain all the app workfiles that stored the current state of the game.
I'm thinking if your kids got ahold of the iPad and decided to start with a new/fresh character, it may not be possible to go back. Given that the device is not altogether geared for multiuser usage (Apple would rather everyone got their own), many games don't support multiple users, besides those on other devices when in networked multiplayer mode.
But hopefully they will answer and set the record straight. While you wait may want to interrogate the infractors on what they specifically did so you can provide details to the maker if they need them.
snozdop wrote:
Can be either iCloud or iTunes depending on where you chose to do your backups to.
I'm not sure iCloud stores everything. Even iTunes states that iCloud "Backs up the most important data..." whereas locally there will be "A full backup..."

Trying to play a song on my iPhone and it plays a different song

Using iTunes on my iPhone 4S - when trying to play a specific song it jumps to another song and wont play the one I want. This happens with songs from iCloud and even songs that i purchased directly from iTunes on my phone.
anyone else have this problem and find a solution?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Stop and Start play from iPod - fine from HD library

I use an iMac G5/2ghz/1.5G at my office. I installed upgrades this morning for both iTunes and Tiger, and now, when I connect my iPod to play through iTunes, I get the stop and start stutter play.
I ripped files off the iPod and put them into the hard drive library, and those play fine, but anything that's playing through the iPod is stuttered.
FYI - it's a third gen 20G iPod, connected via Firewire, with v2.3 software.
This Mac is authorized to play everything on my iPod, and it was all working fine before the upgrade - so, any ideas?
(Please help - I can't stand listening to local radio with commercials, and the bandwidth police will close in on my for listening to streaming...)
Thanks.

The first thing to check would be your internet download speed, you can do this atwww.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

TS1630 Does anyone else have a problem where you can't hear anything from your headphones when you plug them in and they play from the speakers? I checked the jack and there was nothing in it so I don't know what to do....

I tried to listen to my music from my headphones and when I plugged the headphones into the jack, and pressed play, the music came out through the speakers. I don't know why that happened but I've never been able to get sound through my headphones.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Why did using i cloud back up save multiple copies of my photos and sync photos from my iphone that i cant delete?

why did using my i cloud back up save multiple copies of my photos and sync unwanted photos from my computer?

I did that, and it did not work. But I will try it again.
EDIT* Finally!!! I have done this several times, and it hasnt worked. You comment that I should do that and it works.
thanks

Play ends when song ends - Shuffle and Continuous Play not working

I'm pretty sure I did not install an update prior to this starting. Since the problem began, however, I uninstalled iTunes and reinstalled to see if that would solve the problem and it did not.
I typically play songs, on shuffle, from my main library. When I open iTunes shuffle is automatically selected and I click on the play button to choose a random song. Since this past thursday when I click the play button nothing happens. I have to manually choose a song to play. Once the song has ended iTunes does not choose another song (if on shuffle) nor does it play the proceeding song on the list (if on normal play). In order to play another song I have to choose another. Once that song ends I have to select another and so on.
I have checked the settings and I don't see anything that could be effecting the way iTunes plays the songs.

*Figured it out*
Somehow, all of my songs where not checked....

Itunes is selecting multiple songs when I click and all my comands seem to have changed

I left my computer on playing music from itunes in my room while I was cleaning, and I think my cat walked on it and pressed some series of keys because now when I click on one song it doesn't play or anything then if i click on a second song it selects (highlights) all the songs in between the two. If i hit esc it will clear the highlighted portion and if i right click and then select play the song i am on will play, but if i hit the right arrow it just fast forwards through that song for as long as i hold it but before it was skipping to the next song. I really really hate this and i want it to go back to normal if anyone knows what this is and how to fix it please let me know! THANKS!! <3

Has either if the shift keys got stuck? It might be worth checking thew ctrl keys as well.

Multiple songs within a chapter and continuous play from chapter to chapter

Similar Messages

Maybe you are looking for