Multiple Speakers Choice Not Available

I downloaded fitmware update for airport express (apple base station 6.2)
Now I can only connect to one set of speakers at a time.
I used to be able to check mark a box "multiple speakers" and play music in different rooms. Now I can only choose one room at a time.
I dowloaded itunes 7.0.2.16 again, but no fix.
Please advise.

http://www.apple.com/support/downloads/airportexpressfirmwareupdate63forwindows. html
You need to be running Airport Express Firmware 6.3 and iTunes 6.0.2 or later.
From the Airport Express FAQ
http://docs.info.apple.com/article.html?artnum=108038#9
Question: Can iTunes send a single AirTunes stream to multiple AirPort Express stations?
Answer: Yes. With iTunes 6.0.2 or later, you can send an AirTunes stream to multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware 6.3. The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.
iFelix

Similar Messages

Multiple projects assignment not available in RfC

We are using SAP Solution Manager 7.1 SP11. We are using ChaRM and creating change documents with the transaction ZMCR. We are using multiple projects with different systems. We have the following situation:
M_ERP_0002 (maintenance project of ECC+BW+PI+TM)
•    Development - Test - Acceptance - Production (ECC)
•    Development - Test - Acceptance - Production (BW)
•    Development - Test - Acceptance - Production (PI)
•    Development - Test - Acceptance - Production (TM)
M_SUP_0001 (maintenance project for Solution Manager)
•    Dev - Test - Prod
Now we have an RfC which is valid for the whole landscape. This means on all systems the change must be done. For example SAP security Notes. We create an RfC which is approved by some people and in the impact analysis it is said the change is necessary for all systems.
But the problem is that we can choose only one project in an RfC. For example we choose M_ERP_0002 and fill in all systems in the request for change scope.
Now we want to create the Normal Change for the M_SUP_0001. But when we look at available projects, we see only the M_ERP_0002. We are missing now the M_SUP_0001, so we can not create a Change for all systems on one RfC.
Summarizing: We want to use one RfC (with all required approvals) and create the changes for all the systems (eq multiple projects) , so we don’t have to go trough the complete approval process again for the systems under a different project. We want an RfC and not multiple to do the same change on multiple systems.
Are there more SAP users with the same situation and how I have to solve this?

Hi Richard,
It is more like the business requirement and then design of change management you want to use.
Therefore, it is not mandatory to have one project but easier to use that way again w.r.t business requirements etc
You still can have multiple project and can go ahead with your requirements but then you need to adapt the various Import strategy as mentioned in the document like
Status dependent import
Selective import on status or combination etc
Again if you ended up in more complex criteria where it can't be achieved without any config then definitely need to go for development but avoid as much as you can otherwise it will be big impact during upgrade.
Thanks
Prakhar

Upload Multiple Pictures function not available for 64-bit Windows and IE 11

Hello!
The problem is as follows:
1) Open Picture library;
2) Open "Upload".
Result: "Upload Multiple Pictures" function is missing. Only "Upload Picture" functions is available.
Specs of my PC = Win 8.1 64-bit + IE 11 + Office 2013 64-bit + Shp Developer Tools 2010.
I have also tried the following configurations and they also doesn't work:
A. Win 7 64-bit + IE 11 + Office 2010 32-bit;
B. Win 8.1 64-bit + IE 11 + Office 2010 64-bit;
C. Win 8.1 64-bit + IE 11 + Office 2010 32-bit.
It does work for IE 10, but that's not the case.
Some more notes:
- For Office 2010 Picture Manager worked fine;
- STSUpld.UploadCtl.dll works fine, I can upload multpile documents;
- Tried to switch on Private browsing, put site in trusted sites.
Do you have some more ideas where to look for a solution? For me it looks like deadend already, I have tried almost everything what I could find on google.
Best Regards,
Rolands

HI Roland,try checking this with the Firefox or chrome.
So if you are one of few that are using IE11.you have probably noticed many corruptions and misbehaves in UI. So far I have discovered the following problems:
1.     Calendar web part is extremely corrupted
2.     You will click Settings > Edit Page, Pages will not enter edit mode.
3.     Web Part Properties cannot be modified.
So until we get official CU or SP from SharePoint team, run your sites in compatibility mode.
How to run Compatibility mode: Please find the ways to get the mode.
Way 1:
1.   Press ALT + T when viewing your SharePoint page
2.   Click Compatibility View Settings in the menu that appears
3.   Click Add to add the current SharePoint site to your list of compatibility view pages
4.   Click Close
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Leadtek A280 TD (TI-4800SE) Multiple monitor support not available on

Hello,
I have a new Leadtek Winfast A280 TD MyVIVO card (TI-4800) on a MSI K7N2G-ILSR (nForce2 motherboard). Completely fresh installation of XP pro with nothing except the nForce 2 motherboard drivers and the latest (43.45)drivers. I know that the internal nForce IGP is disabled when an AGP card is inserted.
I have two LG 1710S (VGA connector only monitors), both plugged into the A280, one in the VGA port and the other one into the DVI port using a DVI-to_VGA converter.
The problem is that I cannot use my second monitor at all. When booting it displays a cloned inage, but once in XP the second display (on the DVI) goes blank and stays blank. Nothing I can do with nView or the drivers will make
it work (or even be detected) in any way at all.
Three key points:
1. nView Desktop Manager -> Windows -> Window control is all greyed out.
2. Desktop -> Properties -> Settings shows only one monitor with none of the 'Extend my windows desktop' options one normally sees with dual head cards.
3. Desktop -> Properties -> Settings -> Advanced -> GeForce -> nView display mode ->nView modes only the Standard (Dualview) option is available and the graphic shows only one screen.
I am reasonably experienced with multiple monitors having used Matrox cards for years and setup a nice little Shuttle SN42G dual monitor system using the same nVidia drivers. So I am fairly sure I've not overlooked a setting somewhere.
BIOS is all fully up to date (1.3) and XP SP1 is applied. The card works fine in 3D games and everything, but just does not seem to realise it has a second monitor.
*** KEY POINT ***
I am worried that the MSI K7N2G-ILSR motherboard is somehow preventing the support of dual monitors with my A280 card in WinXP because it itself does not support dual monitors with the IGP. This may not be true, but I have to post my experience into this forum.
*** KEY POINT ***
Thanks,
James Burton

Okay. I figured out what was going wrong. Nothing to do with the MSI or the motherboard but it is of interest to anyone wanting dual monitor on two LCD flat screens.
It turns out that the A280 graphics card (and probably other nVidia cards) do not detect LCD monitors (at least by default) in the secondary position.
This was verified when I connected an normal CRT as secondary an it all wored fine.
Further discussions will be posted in the nVidia newsgroup for those interested
James Burton

Merging multiple pdf files not available

I want to merge multiple PDF files into one PDF file. I used to be able to do it under file>create pdf, but ever since my computer was re-built, that option is no longer under the file tab. Was this something extra that you had to pay for, or do I have to do something to get this add in. Thank you in advance

Yeah you need one of the acrobat family. To be specific, Acrobat Standard, Acrobat 9 Pro or Acrobat Extended
They have 30 day trial on adobe.com. But check first the system requirements so that it won't mess up your computer.

Cannot listen music on itunes, says my internal speakers are not available on airplay

cannot foud speakers for air-play? What is air play? Just want to listen on my PC

Try reinstalling the update:
10.8.3 Combo Update

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

Time Machine - using multiple drives when the first is not available

Hello I have been succussfully using Time Machine with my USB external drive. I have been connecting it to my MacBook Air from time to time. Manual backups as well as the hourly backups when the drive has been connected worked without any problem.
Recently, I connected Synology DiskStation (NAS) to my network and I have added it to the list of drives in my Time Machine setup. When my original external drive (first in the list) is not connected to my MacBook the hourly backup is not initiated by the Time Machine at all. Manually started backup is runnign fine without any problem.
The external drive is annotated with exclamation mark in Time Machines list with "not available" error - and it seems that this is causing the interruption of automatic hourly backup to any drive.
Is there any way how to debug Time Machine? Or to get some logs of Time Machine?
Any similar experience with multiple drive backup when the first of them is disconnected most of the time...?
Thanks a lot for any help
Petr

Perhaps you should address this to Synology's tech support. Apple doesn't provide any support for third-party NAS, so your best bet is with Synology.

Not all Airport Express speakers showing up in Multiple Speakers option?

I can choose my airport express speakers in the drop down menu in iTunes individually, but when I open the multiple speakers option only 2 out of 5 zones show up?

I was able to resolve my issue. I found the answer from another post in an Apple forum. What you need to do is open the multiple speaker option and expand the window to show the additional Aiports/Apple TVs linked in iTunes. Once I did this, I am not able to see everything as expected. Seems like a flaw that it doesn't default to this extended view. Hope this helps.

TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

Brand new macbook pro - iTunes does not recognize multiple speakers, my older macs work correctly

New macbook pro with iTunes 10.5.2. OS 10.7.2 Setting up iTunes.
Two speakers on Airport devices.
Switch at bottom right shows all of the speakers above the line, and "multiple speakers" below the line. The two speakers on the airport devices are #3 and #4 on the list above the line. (i.e. ITunes is aware that these airport speakers exist).
I can click on single airport speakers above the line, and ITunes connects.
When I click on "multiple speakers", I get "computer" and the first listing which is a printer hooked up on an airport express link. Also get the separate volume controls etc. The third and fourth entries on the list (i.e. the airport speakers) are not displayed on the multiple speakers list.
So I can connect to one speaker at a time, e.g. the computer, or any other speaker, but I cannot connect to multiple speakers.
I have two other macs and have never had this problem with hooking up to the multiple speakers.
Thanks for any help.

Same here - the problem is - it was working for a few days after I've upgraded iTunes to version 10, and then yesterday - I've rent the movie from Apple Store and once downloaded with iTunes - I wanted to transfer it to my ATV - however - my link to ATV suddently disappeared. What a piece of Crap. I can't describe my frustration - apple products aren't cheap and they always come with some kind of problem - what the **** is going on - it's not just the design people are looking for but also functional products.
Yesterday I've tried to turn of ATV, remove link from iTunes, start ATV make new connection to iTunes, start up iTunes - ATV shows up, code put in and at this stage I thought it finally works - but hey - forget it - I'm trying to put the purchased rental onto ATV and I get an alert saying that my firewall (which I have none) is stopping me from syncing. I then go to the support page which explains how to deal with it - but on some very old version of the system - my system (Snow Leopard) doesn't have those options any more. So as far I I'm concerned I'm screwed unless they fix the problem with their software.
If you guys know of any possible solution to this problem (and I did read many forum topics already - none of which works) - then please let me know.

My ipod classic 5th generation is not playing any kind of audio. i tried resetting it and i used multiple speakers/ear buds. nothing worked. do you have any other suggestions?

My ipod classic (5th generation) is not playing any audio. when i play a song the little picture of the album cover comes up and the seconds clock and the blue line come up and change/move, but there is no sound. i have tried multiple speakers/ear buds and i have tried to reset it but notheing worked.
What should i do?

Assuming that you actually have the volume turned up (you don't say that you have, after all), make sure that the Volume Limit is not turned all the way down.
Look in the Settings/Volume Limit menu. The small arrow controls the volume as well.

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

HT201335 Airplay speakers not available , The speak Apple TV is currently used by someone else

Hi, i bought apple TV and we are getting error message Airplay speakers not available , The speak Apple TV is currently used by someone else so can you lot tell me that how stop this

Classroom scenario: We have Apple TVs in classrooms. If a teacher is using the Apple TV to display their device & forgets to disconnect, leaves the room . . . next teacher comes in . . . if they still see the other device being mirrored they can kick them off by pressing the menu button on the remote. However, when they then try to connect, they get the "In use by someone else" message. Only solution we've found then is to restart the Apple TV. So, is this truly the only solution?

Multiple speakers not working - need help

I have iTunes 10.6.1 on my Macbook Pro and was using the multiple speakers feature with my 2 airport expresses very successfully until recently. Now when I try to use multiple speakers within iTunes it recognizes those speakers but can't connect. I've tried resetting both airport expresses but nothing. I have all the recent upgrades and haven't done anything out of the ordinary to change things up.
I also know it isn't the airport expresses because I have another product called Airfoil that streams music wirelessly from any source to those speakers via the airport express and that works fine. So it's definitely something specifically to do with iTunes.
One last thing, when I stream iTunes via the Airfoil I have no problems. So again, it's definitely something to do with iTunes.
Any thoughts on what may have changed or what iTunes may be doing?

Figured it out. Turns out the VPN access I use through work causes my connection to breakdown. The only fix I've found is restarting my laptop if I want to use external speakers via Airport Express in iTunes. Not sure if theirs much more I can do. ***** but that's it.

Multiple Speakers Choice Not Available

Similar Messages

Maybe you are looking for