Multiple speakers for airport express

I'm trying to connect multiple speakers from my Itunes but I can't get it to work. I can get one or the other to work but I can't get both to work at the same time. I updated the software for A-express, still doesn't seem to work. Anyone else have this problem? Is there a solution?
thanks

Hi
I have been having the same problem since I purchased an Airport Express. You can select one or the other speakers, but an error message comes up if you try and select both.
It is rather more annoying given that I have 'remote' on my iPod Touch which completely locks up if you try and change the speakers.
I have had no luck getting Apple to understand the issue - despite several emails and phone conversations with support. Ultimately I consider it to be a software development issue.
Hopefully they are reading these posts!!

Similar Messages

  • How to connect to multiple speakers using Airport Express

    Hi -- I have two AP Express modules setup and working in my household. I have no problems using either from my iBook G4.
    How do I use them both at the same time? I cannot find an appropriate way to set this up?

    Welcome to Apple Discussions
    Since you are at 10.4.7, I'm assuming iTunes is at least 6.0.2. If not, upgrade the app via Software Update or Apple's iTunes site to the latest v 6.0.5.
    Since both units work individually, I'd say the problem lies in how the 2 units are configured. Are you using the latest 6.3 firmware for Airport express? To determine your version, download the firmware, select install. The ensuing panel will tell you the latest version for your units. Upgrade if you are using an earlier version of the firmware.
    Post back with results.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.7)   LaCie 160gb d2 HD Canon i960 printer

  • Apple TV and multiple speakers on Airport express

    Hi,
    I'm using Apple TV3 and 10.8.3 Mac with Itunes 11 and would like the flim audio to play on multiple (3) airport express' with speakers attached around the room all on same Wifi.
    Is this possible?
    Thanks

    As my english isn't too good I made a screenshot to show you what I mean.
    As you can see in the image below iTunes only shows me the computer speakers and the AirPort Express. But at the bottom you can see that iTunes actually recognized 3 different speaker (Mac, AirPort, Apple TV 2). Why does the Apple TV not show up in the multiple speakers window? Any ideas?

  • Multiple Speakers on Airport Express

    Hi everyone
    I have recently purchased a second Airport Express so I can now stream my music to 2 different locations in my apartment. In iTunes I now have the option of streaming to Multiple Speakers. When I try to select this option only one of my Airport Express Stations will allow multple speakers to be played. I get the errors message
    "....The current remote speaker Paul's Lounge does not support playback as part of a group..."
    Is this due to the fact that the Airport Express is slightly olders - I didn't know there was an update to the cababilities of this model. Or can this be remedied with a firmware update of some kind.
    I hope someone can help as I'd love to have music playing in my Lounge and Bedroom simultaneously.
    Many thanks
    Paul

    Hello Paullyk. Welcome to the Apple Discussions!
    Is this due to the fact that the Airport Express is slightly olders - I didn't know there was an update to the cababilities of this model. Or can this be remedied with a firmware update of some kind.
    To support multiple speakers, the AX must be running v6.3+ firmware & iTunes v6.0.2+.
    (ref: AirPort: Which version of firmware is on the base station?)

  • Multiple Speakers with Airport Express

    Since the release of iTunes sometime back in feb/mar, I'm so happy to be able to stream music through multiple speakers in different rooms in my house. However, since I installed the latest iTunesSetup dated 2006-06-28 release v6.05, I am unable to play to more than 1 set of speakers, sometimes even only limited to "My Computer". The error message was something like 'could not access the speaker'.
    I've also doublechecked latest firmware and there was none released after http://www.apple.com/support/downloads/airportexpressfirmwareupdate63forwindows. html
    I don't see anyone here with similar problems since there seems to be none posted after Jun 28 on this issue.
    Can any expert help?

    http://docs.info.apple.com/article.html?artnum=303157
    # Click the Firewall tab.
    # Click the Advanced button.
    # Make sure that the option to "Block UDP Traffic" is not selected.
    Thks so much for the reply! My PCs are behind the router and the firewall is not on in this case. I do use the zonealarm normally for other PCs.
    As far as I know, on XPProSP2 we can unblock UDP traffic and normally need to specify which ports though, not universal unblock.
    Any other clues?

  • Multiple Speakers w/Airport Express

    I upgraded from OS 10.4.7 to OS 10.4.9 and now cannot stream airtunes to remote speakers AND internal speakers at the same time. Before the upgrade it worked fine. I'm using iTunes 6.05 (don't like version 7). Anyone seen this? How to fix?

    SCTS, thankyou so much. I had the same problem and figured it was somehing to do with the firewall but not being that technical I could go no further. Its funny how the simple things can be so frustrating! Cheers Ian
    2.33 ghz Intel iMAC   Mac OS X (10.4.9)  
    2.33 ghz Intel iMAC   Mac OS X (10.4.9)  

  • Connecting speakers thru airport express

    I have airport express and want to play the same music as on my apple tv in another room. I plugged the speakers into airport express and clicked on multiple speakers but it does not work. Any clue?

    launch airport utility and enter manual setup for the express, then go to the music tab.
    is there a checkmark in the little box next to enable AirTunes ?

  • How do I connect my Bose Cinemate GS Series ii speakers to Airport Express?

    How do I connect my Bose Cinemate GS Series ii speakers to Airport Express?

    You can connect the Bose to the AirPort Express with either a digital optical or analog audio cable. For best sound I would recommend the digital connection.
    Your Bose speakers should already come with a digital optical audio cable with TOSlink connectors on either end. Either get a 3.5 mm to TOSlink adapter for the end that you will connect to the Express' audio port or get another cable with a 3.5 mm connector on one end and a TOSlink connector on the other. An example could be seen here.

  • Outdoor Speakers and Airport Express

    Hi everyone,
    I'm looking at rock speakers to put in my backyard and connect to airport express, these ones especially:
    http://www.outdoorspeakerdepot.com/hf5.html
    Can anyone give me a rundown on how to use these speakers with airport express and what kind of things I'll need besides them to get them to work with Airport Express?
    Any instructions would be greatly appreciated, I've looked all around and can't find any help so far.

    This may be possible. The AirPort Express is an AirPlay capable device. If your current wireless speakers are also AirPlay capable, then you should be able to stream to both these wireless speakers and to speakers connected to the Express via an analog/digital audio cable simultaneously or separately.

  • PIN-based guest access for airport express

    how do I setup PIN-based guest access for airport express?
    I have a 2010 iMac OS X 10.6.8 and an Airport Express of the same era.
    Thanx in advanced...
    Siegfried

    Hello Bob,
    Thank you for your time on this.  I apologize for not giving you a more complete picture of what was going on. 
    I should have included that I had already performed the steps that you shared and had gotten to the place where I would enter the PIN. 
    The problem was that, after entering a PIN that I had come up with, the "continue" button never became active.  I called Apple Care and ended up talking to 3 different people before I found someone that knew the answer.  The answer is that the guest computer (client) MUST be present inorder for me to complete the setup.  So, problem is now solved.  Thanx...
    Siegfried

  • Is there any antenna for airport express?

    I think i´m having problemas with the signal of my airport express and all the readings i made always refer antennas for airport extreme base station.
    My question is, if there is any antenna for airport express that don´t needs an extreme base station.
    Thanks
    Ricardo
    Pentium IV   Windows XP Pro  

    Two quick things to check using AirPort Utility on both devices:
    On your "main" base station
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab/label located just below the row of icons
    There must be a check mark next to "Allow this network to be extended"
    Click Update to save your changes.
    If you don't see this option, you likely have an older AirPort Extreme that does not support the "extend" feature. Please clarify on the version that you have
    On your AirPort Express
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab
    Wireless Mode = Extend a wireless network
    Wireless Name = Same name as your main network
    Check mark next to "Allow wireless clients"
    Wireless Security = Same setting as your main router
    Wireless Password = Same password as your main network
    Confirm Password
    Click Update to save settings
    If you do not see the "Extend a wireless network setting", you may have an older AirPort Express, or if you are sure that you have a newer 802.11n model, try holding down the option key while you click on the selection box to see if the "Extend" setting will appear.
    Assuming no major obstructions between the main router and area that needs more wireless coverage, a good starting location for the Express would be a point that is approximately half the distance between the main router and the area that needs more coverage.
    As I said, this feature works very well if major obstructions do not come into play.

  • HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

    what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

    You can find out as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the AirPort Express
    Click Manual Setup
    Click directly on the word Version (3rd line)
    If there are any updates, you will be notified.
    If there are not any updates, you have already have the latest firmware.

  • Mini-UPS solution for Airport Express

    Hello Airport community! This is my first post.
    I'm wondering if anyone has had any luck with a battery backup (UPS) for Airport Express'. I have a larger UPS for my Time Capsule which is the main access point. I've hardwired this one into the network to broadcast the same network but extend the range. If the power goes off, since a number of devices are connected to the second, I'd like to have it on back up as well. However, it's installed very in a tidier manner in a smaller area – no room here for a big APC UPS.
    I've been able to find 12 V battery backups, but nothing for the Airport since it's a 120/240 V input.
    Anyone have any ideas of how this might be accomplished?
    Cheers,
    David

    As a completely different kind of solution.. Although John's battery and car inverter idea is creative.. and will work..
    Use an extreme or something else that is dc powered.. You can buy a cheap second hand extreme for $30-50 on ebay or whoever has your second hand market. It can even be a different brand.. tp-link, edimax etc.. most are 12v which is excellent.. then power it down the ethernet. So you don't even need a power point.
    I'm wondering if anyone has had any luck with a battery backup (UPS) for Airport Express'. I have a larger UPS for my Time Capsule which is the main access point.
    Plug the 12v power supply into your UPS.. with the TC.. and buy a set of injectors for ethernet..
    They look like this.
    http://www.ebay.com/itm/PoE-Power-Over-Ethernet-Injector-Splitter-Adpater-Kit-/3 60843249285?pt=LH_DefaultDomain_2&hash=item5403ef0685
    Just a few dollars.. they passively use the extra pairs to carry power over the ethernet wiring.. you can also buy active sets but they are more expensive but keep the line at gigabit.
    http://www.ebay.com/itm/TP-Link-POE200-Power-over-Ethernet-Adapter-Kit-Injector- Splitter-5-9-12V-DC-Out-/181210762297?pt=LH_DefaultDomain_0&hash=item2a3100cc39
    I have not hunted for cheapest but I have tried to keep price in mind.
    There was a time when Apple used POE in the old domed Extreme.. and that was very handy.. the Express should have always had it.. it is a natural to power over ethernet rather than require power outlet next to it.

  • How to find MAC address for WAN port for Airport Express 2nd Gen.

    The New Airport Express has a LAN and a WAN ethernet ports. How can I find the MAC address for the WAN ethernet port as my Service Provider needs it for provisioning....I can fid MAC address for Ethernet and for two wireless 2.4 & 5GHz but not for WAN ethernet port using Airport Utility 6.1

    Many thanks for the swift response. However, there is no WAN MAC address on the box or on the device anywhere. I even used magnifying glass to find one .
    The airport utility shows only three mac addresses. One for 2.4GHz, one for 5GHz and one fo the ethernet (LAN port) whereas there is another ethernet port in the device mentioned as WAN port and I am still not able to find the MAC address for the WAN ehternet port for Airport Express (2nd Generation).
    Will appreciate a response to make th device work wiht my service provider as providing them the WAN mac address is a must. Had there been an option for cloning mac address, the issue would have not been there.
    Many thanks again - in advance.

  • ITunes can't connect to remote speakers PLUS Airport Express p/word problem

    I am running iTunes 7.4.1 and have previously been able to play iTunes through remote speakers via an Airport Express . After upgrading iTunes some time ago, I am unable to connect to the AE any more. The AE shows as an option in my iTunes window, but when I select it from the drop down option box bottom right, it just doesn't choose it.
    I have read other discussions pertaining to this, and have followed all of those solutions, but to no avail.
    I have done a hard reset on the AE restoring it's factory settings thinking I should just start again, and it has been renamed "Base Station Oa369f" so I know this has worked, but when I try to reconfigure it through Airport Utility, it asks for a password. I tried it's old password, and also tried the generic one "public" as stated in the AE setup guide, but it rejects both.
    I am keen to figure this out as I'm about to buy a new printer and another AE so I can print wirelessly, but don't want to have the same issues if it's an AE bug that can't be fixed, I would be left with no printer!
    I know this is two quite separate problems, but if anyone has any ideas for either I would be really grateful.
    Thanks very much

    I have exactly the same problem which has been driving me nuts for the last couple of days. However I am able to access the dropdown list of speakers. I have mine set to multiple speakers, and now it WILL play through my Airport Express again, but only when playing through the internal speakers at the same time. When I try to play solely through the Airport Express it just hangs.
    Come on Apple, you need to be regression testing your upgrades far better than this, for something so basic to go wrong.

Maybe you are looking for