Multiple speakers gone after updating to iTunes 10.1

I received a new iPod Touch the other day and after being forced to update to iTunes 10.1 in order to use it, all of my satellite speakers -- hooked up to AirPort Express units -- disappeared.
In order to get them back working again, I had to update my whole system to 10.6.5, unplug all of my AirPort Express stations and reboot them all, and then had to turn Home Sharing on in order to get the Remote app working again on my older iPod touch.
My question is this: why was all of this necessary, Apple? When you force someone to use a certain version of your product in order to connect a device to your computer, you should be making **** sure it doesn't break all of the settings that already work.
Over the past few years, it seems Apple has really being going backwards with their usability...

You and me both! I stopped the Bonjour service and remote speakers returned per the post below. Hmm. I have Bonjour for Windows installed on all my machines except for a laptop running Vista RC1. That was the only one that the remote speakers didn't dissapear from. Apple software conflicting w/ Apple software? Say it ain't so!
HP nc6000   Windows XP Pro  

Similar Messages

  • My library in iTunes all gone after updated to iTunes 12.0.1.26

    I used to located my music library to my external hardest (seagate backup plus). After I updated new version of iTunes (along with OS X Yosemite), all the music library all gone.
    By the way, it happen with MacBook Air mid-2013 13" 

    You said you did a backup...
    iCloud backup or iTunes backup?
    Also, two suggestions for next time:
    Software updates can be done right from your device, under Settings > General > Software Update if you have iOS 5 or later. This usually prevents a lot of problems users typically run in to when updating in iTunes.
    When updating in iTunes, even though your restore may seem complete, it is still restoring your apps, music, etc. Please be sure that it is absolutely complete before unplugging.

  • My itunes libary has gone after updating itunes

    Hi , after updating my itunes to 11.0.2 i've opened itunes and everything in my libary has gone, its wiped all photos and i was wondering if there was anyway off getting it back as i don't want to have to create all playlists again

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue?

    After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

    Hi
    After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
    All other features seem to work... only opening  the iTunes store is failing..
    I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
    Please help

    Purple-Gecko...all that I can say is, "Boom!!!"  You are THE man/woman, whichever the case may be.
    The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3).  I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store.  My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5.  Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs.  I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store. 
    Your suggestion is the only "cure" that I have found.
    I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

  • HT204370 Purchased movie gone after update

    I had purchased the movie Bolt! aaages ago and it was always in my library. After updating to iTunes 11.0 (I guess) it's just gone. What happened? And how do I get it back??

    same problem here!!!!!
    @jodyask
    arrogant little timewaster
    this is an embedded device.
    what exCTLY ARE WE SUPPOSED TO DO TO NANNY APPLE'S UNFINISHED TAT?    

  • Iphone 3gs need activation after update by itune and no service

    iphone 3gs need activation after update by itune and no service
    what can i do ?

    No need to Multiple post... see your other Thread...
    https://discussions.apple.com/thread/5846382?tstart=0

  • HT5706 photos on screen saver gone after update of apple tv

    photos on screen saver gone after update of apple tv

    Welcome to the  Discussion Forums
    Why are you looking in a shared library, is itunes set up as a secondary library.
    See This
    If you are set up as a primary library you need to look in my tv shows.
    When you say you have reinstalled everything, does that include itunes (if so how did you do that), does it include rebuilding your itunes library.

  • Cd's won't burn after update to iTunes 6

    New poster here (but have been reading for months).
    I am an official idiot. Backround: After much stress, I solved my burn problms that started after updating to iTunes 5, thanks to this forum. I went from the error at the very end of the burn to at least being able to burn very slowly.
    Finally updated to version 6, after reading here that nothing changed about burning from v5 to v6, and thinking I'd waited long enough that the bugs would be out of v6-- HA!
    Now I can't burn at all --itunes hangs up right after reading the tracks. I can hear the disc spin then stop completely.Help!
    Here are my diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Hewlett-Packard Presario V2000 (EC178UA#ABA)
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: ATI RADEON XPRESS 200M\ATI RADEON XPRESS 200M
    IDE\DiskHTS541080G9AT00_______________________MB4OA56J, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomPIONEERDVDRW___DVR-K15_________________1.11___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: PIONEER DVDRW DVR-K15, Rev 1.11
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 20 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    Thanks in advance for any input
    HP L20005US   Windows XP Pro  

    I'm suddenly having burning problems also. Was working fine and will burn using other programs so I don't think it's the drive. I can click to start burning a playlist, it runs through checking the playlist, checks all of the songs, then the entire program freezes. It doesn't give an error message to help me figure out the problem. Not trying to burn songs from iTunes store, just my own compilation. Using the same disks I always have. The only thing I've done recently is run a Microsoft Security Update. Here is the info from my CD Diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 2400
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
    IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGDVD-ROM_SD-616E_________________F501___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomNEC_CD-RW_NR-9200A_____________________1.01___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG DVD-ROM SD-616E, Rev F501
    Drive is empty.
    E: _NEC CD-RW NR-9200A, Rev 1.01
    Audio CD in drive.
    Found 11 songs on CD, playing time 41:57 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:18:22
    Track 3, start time 07:05:22
    Track 4, start time 11:03:33
    Track 5, start time 14:37:00
    Track 6, start time 18:31:39
    Track 7, start time 22:32:62
    Track 8, start time 26:29:02
    Track 9, start time 29:49:57
    Track 10, start time 34:07:30
    Track 11, start time 37:50:71
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32 40.
    The drive CDRW speeds are: 4 8 16 20.
    I noticed that they have an iTunes 6.0.2. Should I just upgrade? If I download from the main iTunes page will I lose all of my songs?
    Thanks in advance for any help you can provide!
    Dell   Windows XP  

  • Apps gone after update

    Apps gone after update iPot toch touch to 5.0.1

    My guess is that the apps were not in the iTunes library on the computer on which you did the update.  Apps )and ther items like music)are nt in the backu that iTunes makes as the first step of the backup.
    To redownload:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • After updating to itunes 11.1 I've lost more than half my music (1,500) songs.

    After updating to itunes 11.1 I've lost more than half my music (1,500) songs.  To the right of the song there is the the cloud with the arrow pointing down, indicating I can download the songs from the cloud, however when I click on it,nothing happens.SOS!
    Further, tracks that I've uploaded from older CDs are gone. Just as an FYI.
    Anyone know how to fix this?
    Thanks.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the *Previous iTunes Libraries* folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename *iTunes Library* as *iTunes Library (Empty)* and then rename the restored file as *iTunes Library*. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See Music Folder Files Not Added and Super Remove Dead Tracks for clean-up tools, if required.
    tt2

  • Ipod classic won't mount after updating to itunes 11.0.2

    ipod classic won't mount after updating to itunes 11.0.2.
    I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
    Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
    I've restarted the ipods 10+ times each.
    All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
    One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
    Machine is a Mac Pro running 10.6.8.

    Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
    Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
    I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

  • HT203167 After updating to itunes 10.6.3 I lost all my playlists, how do I retrieve them?

    After updating to itunes 10.6.3 I lost all my playlists, how do I retrieve them?

    Hi there,
    One thing that may help is re-creating the iTunes library by following the steps in the article below.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    -Griff W.

  • AFter updating to iTunes 11, my first generation Apple TV no longer automatically syncs when I open iTtunes nor does it display its playlists in iTunes.

    AFter updating to iTunes 11 my first generation Apple TV wasn't displayed any longer in iTunes. I had to relink it and after that it no longer automatically sysnc when I open iTunes, nor does it display its play lists. It still has its photos and play lists and it is linked up for streaming but does not sync as it used to do. Is it possible iTunes 11 doesn't support first generation Apple TV the same way it used to.?

    Yes, the first generation model still works with iTunes 11. It sounds as though you have set it up as a streaming only library.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • HT1364 after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

    after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

    You might want to post this over in the iTunes Match forum.

Maybe you are looking for

  • How can the info block be assigned with the view and assign view to users.

    Dear Friends, Anyone could plz tell me how can the info block be assigned with the view and assign view to users.  Also how can the info block in sale summary be assigned with a view and how to assign this view for user. Regards, Ashima

  • Synchronous call to Stored Procedure

    Hi all              Am new to Stored Procedures. I need to do an HTTP-JDBC scenario using SP(synchronous). My SP takes an output parameter 'flag' (along with the input parameters)and sets it to 0 or 1 depending on a condn. I need to get this value at

  • Displaying Chinese PDF

    Hello, the PDF file written in Chinese works well on my macbook, but when I sent it to my ipad, it displays something like code that I cannot read. Thank you for your help

  • Very slow tree

    Hi all, I have a strange problem. I build a tree, based on a fast query. The query returns 50 rows. When I use the tree it takes more than a minute to render. The query itself is returning the rows in a second. Any idees or clues? Regards, Learco

  • Concatenation function on Webi report

    Dear All, I would like concatenate Code & Description of caracteristic in a cell of Webi report... Formula is correct but the ratio is "#UNAVAIBLE"... Workaround ? Solution ? Thanks Cédric