Multiple Steps Verification

Hi,
How can I get multiple steps status from TestStand? I have 20+ pass/fail steps in code and need to update one station global array based on the result status. Example of my sequence given below for better understanding.
Step1: Action 1
Step 2: Action 2
Step 3: Test 1 (Pass/Fail)
Step 4: Test 2 (Pass/Fail)
Step 5: Action 3
Step 6: Test 3 (Numeric Test)
Step 7: Test 4 (String Test)
Step 8: Test 5 (Pass/Fail)
Step 9: Action 4
Step 10: Test 6 (Pass/Fail)
In this sequence, if Test 1, 2, 6 passes, I need to update one Station global (array element 1); if Test 3, 5, 6 passes, need to update Station global (array element 2) and Test 4, 6 passes Station global (array element 3). How can I implement it? At present we are doing with ANDing unique number of steps status with “if” condition.
Thanks,
Sanad MM

You have Result array at runtime, and there are all status of steps, then you u need to write expression to check them and do actions on stationglobals

Similar Messages

  • Google 2 Step Verification on Gmail causing 10.9 issues with iCloud Keychain Sync?

    Hi
    I have just installed 10.9 on my Air 2011 and it works fine. I signed up the iCloud Keychain sync. I also updated my iPhone to iOS 7.0.3 and also signed up for iCloud keychain sync. All appeared well until I set up my iMac 2009. This had the same email accounts setup but as POP not IMAP (my bad) and so I ended up with multiple email account copies everywhere. I corrected this on each device without issue. Managed to lock an exchange account for work but I can sort that through IT support tomorrow. Anyway an issue with my Gmail cropped up. As I have 2 step verification enabled I have application specific passwords for each device. Now I found that the iMac (last to move to 10.9) propagated its app specific password to the Air and then locked the Gmail access out. If I correct on the Air it propagates back to the iMac locking that out of my Gmail account.
    So iCloud Keychain sync only seems to support one password for each email account.
    The only option I can see is disable 2 step on gmail and revert to my account password rather than an app specific password.
    Has anyone had a similar issue?
    Has anyone managed to get a solution where gmail 2 step can be retained?
    Is there a way to block certain accounts from participating in the iCloud Keychain sync?
    Is there a way to force the same app specific password on multiple gmail accessing devices?
    Any help welcomed.
    Thanks

    Yep. My other iMac works now too on App specific passwords and iCloud Keychain sync. So that is my iPad, iPhone, Mac Pro, Air, iMac 2012 all working fine on Gmail App Specific passwords. Just my iMac 2009, presume its my bad and in need of a revoke. Sorry for wasting all your time.

  • Mac mail not working with gmail 2 step verification in yosemite

    Every couple of days my 2 step verification seems to drop off the mac mail (and calendar) radar. Ive been using mac mail with 2 step verification (gmail account) for about 8 months, no problems. About 1 month ago my mac started asking for my gmail password. I have revoked and regenerated my password about 6 times recently to try to overcome this issue. The new password works for a couple of days and then mail and calendar start asking from my password again.

    Not quite a reply, but I'm not sure how best to add to my first comment.
    One of the issues with this (and there are multiple) is that I can't use handoff to work on something on my mac, started on my ipad, if it is working through my gmail account eg notes, calendar, email.
    This bug is totally crippling the productivity and flexibility that came with ios8/yosemite developments.

  • Mail and Gmail two-step verification

    For the last several days I've been encountering an issue with Mail.app and gmail where my application specific password is valid for one day only. This is not the case for the application specific password I have set up to work with Mail on my iPhone or any other apps. I have used two step verification successfully for months until one day, inexplicably, I was alerted that my password was incorrect. As I mentioned, this happens now on a daily basis.
    For what it's worth, I've tried what's listed in this thread to no avail.
    https://discussions.apple.com/message/15206873
    Any help would be appreciated.

    Hi All,
    I used to have that sort of problem,
    first you could go to the connection doctor on you mac (it's on your 'Window' - > 'Connection Doctor' )
    then check if your google account 'Smtp tab ' and 'Imap tab '  are all on the green light 
    If one of it is not connected ( Which means 'red' light ) , here is my solution .
    Go  your keychain access ( comman + space 'keychain' )
    click tab 'LOGIN'
    On the search tab Find either SMTP/IMAP  (Depend which got the red light) 
    There will be several accounts shown up if you have multiple email account registered on you mac mail.
    find manually the account of your gmail account (Double click each one of it to check which account it )
    Check again if you have 2 key chain on one single account
    After you find your google account on your key chain  and check the box "SHOW PASSWORD"
    Change the password according to the google 2 step verification password
    click save changes .  (enter your admin password)
    Hope this will help
    K

  • Can't sign in to MyAppleID with 2-step verification

    I have 2-step verification turned on for my US-registered AppleID. I am trying to log in to the "My Apple ID" website (https://appleid.apple.com) from a MacBookPro that is not yet a trusted device. I get asked to select an existing trusted device to send a verification code. I select my iPhone and send the code. I get the code on my iPhone. I type in the code and hit Continue. The page reloads, but instead of logging into my account, I am still stuck with the "Verify Device" window. I type the code again, multiple times, but it never accepts it. I click "Send a new code". It displays error message "ESA Device not present". What gives?

    Here is another thing I tried:
    I went to System Preferences on my not-yet-trusted MBPro, and tried to turn on Keychain under iCloud. It tells me that a request has been sent to my other trusted devices. I am not getting anything on my iPhone. I do get a mesage on my iMac, but it disappears quickly. On second try I have System Preferences/iCloud open on my iMac, and I see that my MBPro is requesting access. I click on the request and it prompts me for my password. While I am typing my password, the window disappears, and the request is gone. What is going on here?

  • I didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME

    i didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME
    please help because all my data are stored in the cloud

    - See if it is listed here for downloading. If it is then redownload it..
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - If not there then contact iTunes.
    Contact iTunes

  • Does anyone know either the default password for the YouTube app or how to sign up for googles 2-step verification? Any help would be appreciated.

    I have a YouTube/google account, but when I tried to sign in it said I had an incorrect password. I tried again and it gave me the same message. However, when I sign in using safari, it works just fine. Then I found out it was because of the new 2-step verification of googles. But when I tried to sign up for two step verification, I couldn't see how, nor did it give me a default password to YouTube.

    Check out Wordpress.  You can either use the website at Wordpress.com or use the Wordpress software installed on your site to run it.  A lot of companies (not so secretly) use Wordpress as the backbone of their website with a custom "theme".  Take a look at this YouTube video and it will give you a little more background than I can just typing an answer.  Although it focuses on blogging, it can just as easily be used for another kind of website with a different free theme:
    http://www.youtube.com/watch?v=MWYi4_COZMU
    And if you wnated to install it on your own website, check out the info from Wordpress.org:
    http://codex.wordpress.org/Getting_Started_with_WordPress

  • Can I setup two-step verification for more than one Apple ID?

    I have one iPad and one iPhone.
    I have four Apple IDs.
    I want to setup two-step verification in all four accounts.
    Can I?
    It seems that I can't, because to add a "trusted device" to an Apple ID requires setting up Find My iPhone on that device. Find My iPhone requires an iCloud account (which is available with every Apple ID). But once you change the iCloud account account used for Find My iPhone on a device, the device will not be able to be used in two-step verification for the previous iCloud account. Or will it get remembered?
    Anyone have any knowledge about this?

    You should be able to have more than account authorised on your Mac's iTunes via the Store > Authorise This Computer menu option - and you should be able to select and sync purchases from both accounts to your phones

  • How can I get around not having a code to access firefox for 2 step verification

    I installed 2 step verification but didn't receive an access code. I cannot access my account. The solutions in 2 step help just run me around in circles. I tried them all but, they take me back to the sign in page which again ask for the code I do not have.

    upgrade your browser to Firefox 8
    * getfirefox.com

  • How do i select multiple steps and move them?

    Hi everyone! I'm trying to select multiple steps and move them all into a branch of a condition outcome. Here's the thing, I have almost completed my workflow with several steps for dynamic approval, however, i need to put a condition at the very start of the workflow and it does not seem that there is an easy way to move all of the steps into one branch. I find the workflow explorer really clumsy in this respect. Is it easier to just drag one outcome of the condition, say to the very end of the workflow? It does not seem to work for me though...hmmm...
    Thanks and generous points will be awarded!

    Funtion Module 'SWD_GET_WORKFLOW_DEFINITION ' gives the structure of the Workflow definition. The informations are stored in following table.
    1. SWDSTEXT -> Table which gives WF Steps and descriptions
    2. SWDSBINDEF --> Binding information is stored in this table
    3. SWDSMNODES -> All nodes information is stored in this table
    4. SWDSMLINES -> Workflow lines are stored in this table.
    <b>SWDSMLINES</b> and <b>SWDSMNODES</b> are important tables for current requirement. By changing <b>SWDSMLINES</b> the bulk copy and paste can be incorporated. But this is <b>very very risky</b>, better to have a backup of workflow definition before doiing anything.
    Any enthuiasts to write code for a unitlity to move multiple steps ?

  • Since installing Microsoft two step verification for my Outlook account via my PC I can no longer send emails on this account on my iPad. How can I rectify this?

    Since installing Microsoft two step verification on my Outlook Account via my PC (Acer) I am unable to send emails on my iPad. I can neither remove two step verification or find a way to solve this. I would prefer to keep this email account as my prime one.

    You will probably need to create an app password for the Outlook account for use on the iPad...
    http://windows.microsoft.com/en-us/windows/two-step-verification-faq
    http://windows.microsoft.com/en-us/windows/app-passwords-two-step-verification

  • Locked out of Apple ID AND lost Recovery Key for two-step verification

    Hey guys,
    Firstly, as the title implies, this is a double-whammy of a problem, and obviously, it is very much my fault. The reason I'm bothering to post this, however, is to find out if anyone else has had this issue and where they are at with it.
    The story:
    I set up two-step verification on my Apple ID about a year ago as I thought it was a good idea. I wrote the Recovery Key down as it told you to, and put it in a folder full of other important documents. In a epic mental lapse, however, I now remember later throwing out that folder, forgetting about my Recovery Key. Ya, that is my fault, I'm and idiot. Anyways...
    Fast forward to a few days ago, and I all of a sudden received messages on all my devices saying that my Apple ID had been disabled for security reasons, and that I had to reset the account in order to regain access to it. Scary, but no problem, right? Well, after entering my Apple ID into iForgot.com, the first thing it asked me for was my Recovery Key. This is around the time I was banging my head against the wall in realization that I had thrown it away, but I was relieved to see the "Lost your Recovery Key?" option at the bottom of the screen. I was even more relieved to discover that I had what I needed to reset it: my current password and a trusted Apple device. The catch was that to reset it, I needed to log into my Apple ID to initiate it, which of course I couldn't do because it had been disabled, and the only way for me to disable it is, again, to enter in my Recovery Key. This effectively put me in and endless loop, without any apparent way of gaining accesses to my account. I did contact Apple about it, and I was ultimately told that the lock on my account was so tight, that not even Apple could gain access to it.
    I understand that this level of security is probably the whole reason for the two-step verification in the first place, and I again concede that it was extremely foolish of me for forgetting about and discarding my Recovery Key, but a few things still don't make sense...
    1. Why would they put a "Lost your Recovery Key?" link on the password recovery page when a password is needed to reset the Recovery Key itself?
    2. As far as I can remember, Apple, in their briefing of how two-step verification works, did not bring up this scenario, which is probably relatively common. They DO mention that they can't help when you don't have access to two of the three necessary things for recovery, but they never brought up the apparent exception of if the account is disabled, in which case having two of the three things needed is not enough. I don't understand how they couldn't have mentioned this scenario.
    3. Given the above thought, how could Apple not have some sort of special contingency for this type of situation? I profess my ignorance of how these types of systems are set up, but I would feel that there should be a special method for recovery in place if the account has been locked, and the owner is able to verify that they have the password and trusted devices.
    I didn't mean to make it sound like a rant. I ADORE Apple, but this system seems like it's less than perfect.
    Has anyone else ran into this issue? If so, is your situation similar to mine?
    Thanks for any response!

    Hey everyone.
    It's been awhile, but I wanted to share with anyone who is interested some general knowledge about this issue that I have learned while communicating with Apple support. Unsurprisingly, the issue is still unresolved, and I am under the impression that it will remain that way, but I'm still trying to get in touch with one of the senior representatives I spoke with a while ago who seemed to think that there might be a solution, so I suppose there is still a chance that things could turn out for the better.
    Here's the rundown:
    Anytime you are unable to sign in to or access your account because of "security reasons", your account is under what is called a "DS Lockout".
    A DS Lockout on an Apple ID can be triggered for a few reasons, such as when too many failed logins to the Apple ID (using an incorrect password) are attempted, or when a purchase is made that Apple believes to be fraudulent.
    Under normal circumstances, a DS Lockout only lasts for 8 hours, after which the lock is lifted and access to the account by inputting the correct password is re-enabled.
    This is where the catch for anybody who set up two-step verification is.
    According to one of Apple's security representatives, IF you have two-step verification enabled upon being inflicted with a DS Lockout, the 8-hour lockout period is extended indefinitely as an additional security measure (a feature, I suppose). Therefore, the only way to regain access to the account is by resetting the password, as waiting for the lockout to expire is no longer an option. And of course, resetting your password, as stated by Apple, is one of the situations in which you need your Recovery Key. EVEN IF YOU KNOW WHAT THE ACCOUNT'S CURRENT PASSWORD IS, the lockout prevents you from being able to input it as a means of authentication. You MUST reset your password in order to regain access, and you MUST input your recovery key in order to reset your password.
    So, that seems to be the gist of it. It does make sense, but here's my problem:
    Upon setting up two-step verification, Apple does warn you of many things, but they do not make any mention of this specific scenario. Indeed, it is very much my fault for loosing my verification key, but the thing is, I’m human, I make mistakes, and I know that I will continue to do so. One of the reasons I chose to take the risk of setting up two-step verification is because Apple explicitly stated that as long as I had access to two of the three required "keys" -- my Recovery Key, my password, and at least one of my trusted Apple devices -- I would always be able to gain access to my account. In other words, as long as I didn’t screw up so bad as to loose access to two of my keys, I’d be okay. Obviously, there is a huge exception to this case that, again, is not mentioned anywhere, hence all the confusion. Had I know that it was possible that it could come down to me needing a single, specific key to regain access to my account, I probably would have opted out of two-step verification, recognizing that as a busy college student who's constantly reorganizing and dealing with tons of forms, worksheets, and other various documents, it's not as easy to hold on to a slip of paper as it might be for others. I'm hoping that at some point, Apple adds a big, red warning to the setup process which reads something like:
    "In the event that your Apple ID is locked due to a detected security risk, your Recovery key will be necessary to regaining access to your account; knowing your password and/or having access to any of your trusted devices will no longer be enough."
    I really do appreciate how seriously Apple takes its security, but I think that there is still room for improvement. This should start with more clearly and fully stating the conditions of its security measures, as well as having its customer support be more educated on these conditions (they themselves stated that they had never been trained on issues revolving around two-step verification). Protecting someone's private information is important, but so too is making every possible effort to ensure that customers can't easily loose access to all the content and services that they have spent much time and money building up and using.
    As stated above, I'm still trying to get a hold of the Apple representative who initially assisted me, so if I have any additional updates, I'll be sure to reply to this thread. I hope that anyone who is going through the same issue, or is simply curious, finds this information to be useful.

  • HT204152 Apple ID Disabled & Lost Recovery Key (Two-Step Verification)

    If you use Two-Step Verification:
    If your Apple ID is disabled "for security reasons" AND you lost your Recovery Key ALL HOPE IS NOT LOST!  Speaking from a recent, nearly devastating experience, I hopefully will provide some relief to others in the same boat...
    After speaking to several customer service representatives who basically told me that without the recovery key, there was no way to access my account and everything would be lost forever, I finally spoke with a senior customer service representative that actually understood my issue (most thought I just forgot my password).
    As it turns out, my account was locked due to too many incorrect PW attempts (not exactly sure how that happened).  I was prompted to go to appleid.apple.com and when trying to log in, prompted to enter my Recovery Key.  I couldn't get further than that.  What I didn't realize and the other reps didn't tell me was after 8 hours, the account is unlocked.  I was then able to log in at applied.apple.com and verify my account using a trusted device.  I was then able to create a new recovery key (and print it out and put copies everywhere so this wouldn't happen again!).
    Lessons Learned:  1. Don't lose the Recovery Key again!  2. When talking to Apple Customer Service, ask to speak with a senior customer service representative.  3.  Wait 8 hours without trying to log in and your Apple ID is unlocked again.

    we all have had unsatisfactory results with entry level CS techs. Your advice to be assertive about speaking with a Senior Tech is sound and where I have ALWAYS found satsifaction. Methinks the proprietary Customer Service Knowledge Base may be running the same software as our forums - Terrible searching is a rule here. - the other two suggestions are very good as well - ÇÇÇ

  • Two step verification in Canada SMS does not work with Telus

    Just saw the announcement that Two step verification for your Apple account is now available to Canada. 
    http://www.macnn.com/articles/13/05/10/option.will.appear.automatically.in.accou nt.details/
    Tried to sign up, unfortunately after many attempts and testing with a few different phones it appears that Apples SMS server is not connected with Telus mobility as the messages never come through to any of my phones on the Telus network.
    So maybe the announcement is a little premature. 

    False start.
    The option to sign up for two step verification has now been removed again. 
    I guess they have to get the SMS feature working first. 
    Here is a request.  Apple can you implement the industry standard time based authentication protocol:
    http://en.wikipedia.org/wiki/Time-based_One-time_Password_Algorithm
    http://tools.ietf.org/html/rfc6238
    Same one is being used by:
    Google
    Dropbox
    Lastpass
    Microsoft
    Amazon AWS
    Then you can use one of the many apps available for smartphones and support users who want something secure but that does not require SMS or an apple hardware device to login to their apple id.

  • Can't sign into my Apple Youtube app (the app that Safari links to when you click on a Youtube video). Ive tried the 2 step verification method and tried signing in with my gmail and the password given for the app- doesnt work? What do I do?

    Ive tried followinf a number of posts on using the 2 step verification method- none of it works. Please I need help with this, thanks.

    Also forgot to mention- i can log in with Google's Youtube app- the problem is Safari doesnt link to this app.  So if anyone knows how to get Safari to link to Google's Youtube app youd also solve this problem for me.

Maybe you are looking for

  • How to delete effect from properties, file management, glitches in fcpx

    In the timeline I'm getting missing preview pics and choppiness in sound plus lag after importing to a new 1tb ext HD,  why is this happening? I may have disrupted the import or rendering cuase my computer just shut down, but I tried playing the orig

  • Table to find the company code's Local currency

    Can anyone tell me which table contains data for finding a company code's local currency thanks

  • Parallels for the mac

    I recently bought Parallels for my macbook to download windows xp. I am taking a class at the local college. I have microsoft Word, Excel, Powerpoint for the Mac. Do I need to buy microsoft programs for the Windows xp side in order to work on my file

  • Is it possible to pass a javabean as an href parameter

    Hi I have a JSP where I receive a javabean in the request scope. Is it possible to create a html link passing the object as a parameter to another jsp Pls advise TIA

  • Passing Substitution Variable

    Hi Everyone, I'm trying to pass a substitution variable that contains a where clause from TEST2_PROC to TEST1_PROC, but all records are selected by TEST1_PROC as though the variable is ignored even though it contains the correct syntax. Code below. A