Multiple Stereo Outputs

I recently bought an audio interface to use along with the built in stereo speakers and at the moment I only have a set of headphones for the audio interface, no monitoring speakers.
Ideally I'd like to use logic pro with it outputting to both the speakers and the headphones in a controllable manner. I've created an aggregate device but unfortunately I can't seem to get Logic to output while I'm working to both. When I use a bus I can chain the audio for when I'm listening to it on playback but when I'm for example listening to loops, it only comes out one set.
Any ideas?
Thanks,
Shaananc

Loop preview is monitored via the Prelisten Channel - channel 256 in the environment Mixer, you can also locate it by setting Mixer view to "All" - so route the Prelisten channel to whatever Output you want it to be. Beware that Surround loops will always playback through the channels set in Logic's sourround preferences.

Similar Messages

Multiple stereo outputs when creating a DNxHD MXF OP1a

Hi,
I'm trying to make some DNxHD MXF OP1a's from some source MOVs.
Problem is I am trying to simply passthrough the dual stereo outputs (Full Mix, M&E), outputting as 48kHz 16bit WAV / uncompressed.
Media Encoder seems to only want to deal with one Stereo pair for output, or multiple mono outputs for more than 2 track output.
Does anyone know how to output 2 stereo pairs rather than 4 x mono tracks?? Any help would be appreciated
Ben

Loop preview is monitored via the Prelisten Channel - channel 256 in the environment Mixer, you can also locate it by setting Mixer view to "All" - so route the Prelisten channel to whatever Output you want it to be. Beware that Surround loops will always playback through the channels set in Logic's sourround preferences.

Multiple Stereo Pairs in Compressor

Hi,
I'm having a problem with exporting fcp projects and getting the correct audio on output.
The fcp project has multiple, normally 2 stereo pairs (4 tracks in total). When I send the project to compressor I have a preset setup to create a quicktime mov, using the mpeg imx 625/50 as the video codec, and getting the correct audio codec is where I am having a problem, if I select pass through as the audio setting. When I apply it to the project it changes to 3.1 (L,R,lfe,C) Linear PCM, 32 bit, 48k,(the PCM and 48k at least are correct the res is not) it appears to me when pass through is selected it selects what it thinks is the correct settings that it has. Of all the settings that are available everything can be changed apart from the channel configuration, there is no option available that gives me the correct result. 4.0 (L,R,C,Cs) comes closest (audio levels remain the same, stereo pairing is lost, becomes 4 discreet channels in fcp)
Has anyone encountered the same problem? Anyone have any ideas how I can get this correctly configured?
I need the output to be(taken from an existing file exported in fcp in quicktime)
Apple MPEG IMX 625/50 (50 Mb/s), 720 x 576, Millions
24-bit Integer (Little Endian), Stereo, 48.000 kHz
24-bit Integer (Little Endian), Stereo, 48.000 kHz
Thanks in advance

Ben, who has a pretty good batting average round here, probably meant to say "That's the H.264 limitation when using Compressor."
Multiple audio tracks in H.264 seems to only be possible using third party applications but I'm making this statement only after superficial research, never tried it myself and I have only limited experience with Episode, never even heard of the other products you mention.
Your experience with multiple track output in H.264 trumps that of the elitists and I appreciate you starting the thread, Steve; I learn something new here every day if I pay attention.
bogiesan

Adobe Premiere Pro Help | Multiple stereo assignments for tracks to multichannel masters

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/multiple-stereo-assignments-tracks-multichannel. html

The Direct Output Assignment button shows up in the Audio Track Mixer only when you have set the Master audio track to Multichannel in the Sequence Tracks panel.

CMS crash with core files and multiple report output generation

Happy new year to everyone,
Our BOXIR3.1SP6FP2 env has recently started behaving weirdly by triggering multiple output to users inbox and email notification out of scheduled reports. Also we have noticed the CMS crash with core file (almost 4GB) generation at the time of multiple report output.
Most of the times, CMC crashes and recycles itself. At few times, CMS services alone went shut down.
OS details: RHEL 5.5, 32 GB RAM, 8 core processor on each of the clustered node, Oracle 10GR2.4 CMS DB server, 11GR2.4 oracle reporting DB server and oracle 11.1.0.6 client.
2015/01/21 23:54:37.946|>=| | |28123|1534131088|{|||||||||||||||DBQueue::Read
2015/01/21 23:54:37.946|==| | |28123|1496185744|
|||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID
IN (1004050) ORDER BY ObjectID
2015/01/21 23:54:37.946|==| | |28123|1496185744| ||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:37.965|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 50293
2015/01/21 23:54:37.966|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString Unknown exception in database thread
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 33007
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString CMS is unstable and will shut down immediately. Reason: %1...
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID IN (1009213) ORDER BY ObjectID
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:38.512|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:549) SUNIXDaemon::run: server restart flag is 1..
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:552) SUNIXDaemon::run: in abort ...
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:555) SUNIXDaemon::run: doing the WithAbort case ...
2015/01/21 23:54:38.520|==| | |28123|1496185744| |||||||||||||||(dbq.cpp:1357) DBQ: Time required to read 1 objects: 20.000000 ms
Thank you,
Karthik

Hi Denis,
I'm trying my best for the last few weeks to understand the core issue along with SAP however it is still a mystery.
>Ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 270335
max locked memory       (kbytes, -l) 32
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 10240
cpu time               (seconds, -t) unlimited
max user processes              (-u) 270335
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
Below is the observation as part of troubleshooting:
1. CMS breaks at threshold of 3.9 G.
2. CMS DB sits in a different Linux server than BOE server.
3. All core files were generated by boe_cmsd process and are almost 4GB in size (same as max threshold which it breaks).
4. Shell script which I've added in the BOE servers shows that the CMS DB is available/connecting at the time of CMS crash.
5. SAP analysed the Core files and skeptical about the below lines.
     #3 0x58687b80 in skgesigCrash ()
      from /opt/oracle/product/11.1.0/client_1/lib32/libclntsh.so
     #4 0x58687e0d in skgesig_sigactionHandler ()
I'll continue troubleshooting with a hope to fix it at the earliest.
Thanks,
Karthik

Is there a way to create multiple BQY output to one of the Job File ?

Hello,
I am using EPM11.1.2.3.501 version.
BQY report due to the large amount of data, it is difficult to use a WebClient.
So will share on a quarterly basis.
However,
If modifications are to occur,There are difficulties must modify each file.
For example,
Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
When you run the job, the output of the job file is created.
If the job file is changed, you must modify all four files.
This will be only grow ations.
Is there a way to create multiple BQY output to one of the Job File ??
Please help me.
Thanks

It is not possible to have multiple BQY outpu into a job file.
Thanks,
KK

How to record stereo output in Logic Pro X

I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
Any help will be highly appreciated.

Send everything to Bus X - Bus X to StereoMstr (for monitoring)
Create new Track/Channel
- for Input choose Bus X
- for Output choose No Output
Engage Record on the newly created track and off you go.
Have a nice day!

How to get multiple html output file from an xml document via xslt?

Hi,
the purpose is to generate multiple html output file from one xml file
depending on special tag.
exp: i have an xml file which contains sevreral articles so how to get each article section in an independant html file
Thanks for help

Not a standard feature of XSLT. But Michael Kay's XSLT implementation, SAXON, provides that as an extension. Get it here:
http://saxon.sourceforge.net/

[CRS2008] Scheduling a report to multiple file output in single schedule

Hi,
Is there any way in CRS2008 / Infoview to scheduling one report to multiple file output in one schedule?
i thought maybe it can, but still not found the way.
Says,
I have one report say "Report by Branch.rpt", the parameter prompt is BranchCode.
I want to generate the "Report by Branch.rpt" for every BranchCode in separate output generate file. Like, "Report by Branch.rpt" for BranchCode A, or "Report by Branch.rpt" for BranchCode B.
So, if i run the schedule, it will generate several report based on the report parameter given.
Hope, would find the way.
Thanks in advance.
Regards.
Edited by: fritzwijaya on Sep 20, 2010 3:47 AM

For anyone still looking, the job can be seen under the Job History option on the home screen, but not on the Job History option under the report in the catalog - i am assuming this is becasue somehow im not referencing the report correctly in the ScheduleReport request message.
Also, the jobId returned is a parent jobId, which when used to poll the job status, always returns a 'Scheduled' status. Im now adding 1 to this ID to get the status of my job - this returns the correct status of 'Success'.
Still hoping someone has an idea on the getDocumentData question...?
Thanks.

Imported concert from MainStage 2, trouble with stereo output.

Hi everyone,
I've imported a concert from mainstage 2 in the newest 3. I don't know why but I found many trouble when setting the output of the project.
I'm using a Focusrite Saffire Pro 24 DSP and when a stereo output is set, I see in mainstage the L-R indicator bars blink. Only the Left indicator works correctly, the Right continue blink and I have no output from that connector.
Has Anyone encountered the same issue? Can anyone help me, or could anyone drive me on the right-way to find an answer?
If more informations are needed just ask
Thanks to everyone.

Ummm my apologies if I missed it, but Ive read through this thread and Im not sure if theres an answer to the original question. Ive got a similar situation, AVI out of PP3 with all sources stereo, the AVI sounds great in media player and is definitely stereo. Bring the AVI into Encore 2 and the resulting DVD is double mono using the left channel only heres the strange thing, I get the same results using Nero Vision Express. I am 100% sure the AVI is stereo, it includes clips from an old Beatles song where the old school stereo imaging put all of the vocals into the left channel and the instrumentals into the right, well, the instrumentals are gone on the DVD and Ive got nothing but vocals. Again, the AVI sounds fine, just for kicks I even burned the raw AVI to DVD and popped the disk into a set-top player and it played fine something is wrong with the transcoding and its a problem for both Encore and Nero. Any know whats up? Are we calling it a bug? Seems kind of serious if it is, the kind of bug that should keep a product from launching.

Playing multiple stereo channels out one single mono channel tia sal22

Greetings All
I have a vi which creates multiple stereo audio signals
in labview 8.6.1 and I would like to play all of the stereo channels out one single Mono channel
is this possible? I tried setting all the device ID's to the same thing but a lot of clicks and pops occurred. Basically I'm trying to play and mix all the signals out one mono channel at the same time.
Please note I would like to have each signal that is created played over
the mono channel at the same time.
tia sal22
Solved!
Go to Solution.
Attachments:
lvt_audio_realtime-out left right device ID test onw while loop.vi ‏69 KB
stereo_to_mono.png ‏63 KB

sal22 wrote:
Thanks but which options allows me to do this
tia sal22
Just add the arrays if they have the same length. Use the standard add function (like in 2+2=4). Then arrays are added each index is added together
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Can I connect the digital output of flat screen to digital stereo output?

can I connect the digital output of flat screen to digital stereo output?

Hello JRefugio,
Welcome to the Sony Community.
Are you referring to a Sony flat screen TV? What is the model number of the device to which you wish to connect the digital output from the flat screen? It is required to know the exact model number of the Sony product so that the appropriate information can be provided.
Thank you for your post.

Multiple smartform output to single pdf file

HI,
I am new to ABAP. I have a requirement to combine multiple smartfrom output to single pdf file. I searched in this site. I got material but i did not get the complete concept. Can anybody tell me the methodology and sample code to do that.
Thanks & regards,
Maha.

Hi Mahalakshmi,
Clik on the link to view document: <b>[Combining Multiple Smartform Outputs Into One PDF File|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450?overridelayout=true]</b>
Thanks
Venkat.O

What audio interfaces for iPad are there that give stereo outputs?

I've had persons tell me that an iPad is not good to use as you would a computer in DJing because it can't do split stereo outputs. I was thinking that perhaps an audio interface that connects through the dock might fix that. Can anyone give me a list of such interfaces?

DJ Arctic wrote:
From what I understand, most headphone splitters (like the Griffin DJ Cable) split the stereo track into two mono tracksone for pre-cueing, one for what the audience hears.
Note that the Griffin DJ Cable does not fall into the same category as "most headphone splitters". It is made specifically with a stereo/mono output for the algoriddim djay app.
This is one of the mono output cables you would need to specifically hunt down.
DJ Arctic wrote:
If you know of a headphone splitter that doesn't do that, but gives two stereo channels, I'd be glad to take a look at it.
All of these are single stereo to double stereo outputs -> Headphone splitters
Ask for a headphone splitter in just about any store (Walmart, Best Buy, Target, 7-11) and you'll get what you want.

Multiple fax outputs to sales documents

What are the different options for configuring the multiple fax outputs from a sales documet? if the faxoutput needs to be sent to 8 or 10 of their partners what is the best possible solution.

it doesn't matter how many partners - use the same V/47

Multiple Stereo Outputs

Similar Messages

Maybe you are looking for