Multiple storage bin for single material

Hi,
We wanted to assign multiple storage bins in the material master as the material is stored in mutilple storage bin in the same storage location. We are not using WM.
We want to resolve the issue without implementing WM.
Please advice where and how do we maintain the same.
In plant data / stor 1 view there is a provision for maintaining only one storage bin.
Thanks,
Reddy

it is not possible without WM.
As workaround :
You either create for each storage bin a storage location,
or
you active batch management and let the batch work as bin.

Similar Messages

  • Multiple storage locations for single material - ECC 6.0

    Hi
    Can anyone let me know, how one can map multiple storage loctions for single material?
    regards
    Sanjay

    hello,
    Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
    Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
    Nikhil

  • More than one storage bin for a Material

    if a Material is maintained in more than one bin,what stock placement strategy will be be better,normally the client uses Fixed bin but some materials are  placed in more than one bin.
    Regards,
    Tafanza

    Hi
    If u r using chemical sort of thing, fixed bin will be better.
    Or otherwise next empty bin will do.
    Regards,
    Raman

  • Multiple storage bin location for single material in material master

    HI experts
    1) we have a senario for our cliant , for which it is required to enter a 6 or 7 storage bin locations for a single part which is created in materials master without having a WAREHOUSE MANAGEMENT .
    2) User can enter a quantity while doing GR in to that all locations.
    3) reports based on stock avialble in all storage locations ( like MMBE)
    Kaustubh

    Storage bin used in IM is stored in table MARD. Key fields in table MARD are: client/plant/storage location. So you can have only one storage bin for a plant/storage location combination - even if you want to have more.
    If you want more than one storage bin per storage location you have to use warehiuse management.
    That's all.
    Edited by: Csaba Szommer on Jul 26, 2009 12:35 PM

  • Putaway Block in Storage Bin for any specific Material Code

    Hi Experts,
    We have a problem, we have allowed mix storage, addition to stock in the storage type, our requirement is this, that we want to block one bin aa-01-01 for some specific material code xxxxx, but we want to allow putaway other material codes to that bin.
    How can we achieve this. Can we use LS07 or some other solution. Please suggest at the earliest.
    Regards
    Ishu

    Hi,
    In standard system, you can block one specific bin for the specific material with Putaway strategy "Fixed bin" by maintaining this bin in material master. It is unclear that you set "allowed mix storage" and again required material specific putaway in bin.
    You can change "Mixed storage" indicator to blank. Which explains "___"  Mixed storage is not allowed
           All storage units in a storage bin must contain the same material and batch (one quant).
    If you don't want to change any of current setting you'll need to use the user exit and maintain custom table where you can maintain specific bin for the material for the warehouse. After determination of the bin to putaway in the standard code you can check if it is conflicting to the entry in your custom table.
    Hope this'll help.
    Regards,
    Sudhir

  • Storage Bin for Interim Storage Type 902 for GR

    Hi,
    We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
    I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
    Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
    Thanks,
    Shekhar

    Dear Shekhar,
    Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
    Best regards,
    Christiane
    Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

  • Specifying storage bin for quality inspection.

    Hello all,
    I am wanting to move a material, that is stored in multiple storage bins in our warehouse, into an inspection lot.
    I can create a 322 movement in MIGO however this doesn't specify storage bin location, it looks at the warehouse as a whole.
    So can you please help me to specify the storage bin that I am wanting to create a manual inspection lot on.
    Regards,
    Chris

    you cannot do quality inspections of bins, you can only do quality inspection of material stock .
    the quality inspection in QM module is carried out at inventory managment level.
    an inspection lot is created with QA01.
    This moves the stock into quality inspection.
    Along with the MM posting, a WM posting change notice (PCN) is created to move quantity from unrestricted use to Q-status in WM too. you then process this PCN with LU04 transaction. Here you allocate the quants that are effected.
    when the inspection is done, then a usage decision is made with QA11 transaction, which creates again a PCN in WM.

  • Copy of Storage bin while creating Material master

    Hi,
    When I am creating a material master by coping a existing Material Master (which has WM view and Storage bin maintained), system does not copy the same Storage bin to the material which is getting created
    All the informations are copied except the Storage bin,
    We need this for some business reason
    Is this possible

    Hi,
    We are creating the Material master copying exisiting material for Plant -->  Warehouse --> Storage type

  • Storage bin for storage type

    Hi ,
    How to maintain storage bin for storage type in WM
    Regards
    RB

    Hi
    Check it in LS01N.
    This will do
    Regards,
    Raman

  • 'Storage bin field in material master

    Can we increase character length of 'Storage Bin' field in material master so that bin details can be accomodated ?

    No you cant!
    Takehelp of some other field.(text field)
    Edited by: uttkarsh agrawal on Jan 30, 2009 3:11 PM

  • Multiple webdynpro applications for single webdynnpro component

    I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
    Rgds,
    Praveen

    Hi Saravanan,
    I need to modify it from the portal end, not at the application level.
    I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
    Regards
    Shivas Bhan

  • Storage bin for Project items (Q) MSPR .

    Hello gurus,
    In MM/IM - The storage bin for regular  items resides in MARD.
    I can't find in any table the storage bin for Project items (Q) MSPR .
    Have any idea ?
    Thanks
    Amnon

    Hi ,
    First ,  only IM no WM.
    No "Special stock" field in MARD.
    No sucjh table - VKLAB ,
    Thanks

  • Maintenance of multiple Valuation Categories for a Material

    Hi All,
    Presently we are using split Valuation Category H(Origin) & Valuation Types Domestic & Imported.We need to keep track of materials that are serviced externally with status for material(Refurbished & Repairable) for same material so that we can maintan no of times a material has been repaired.Also material should not be valuated when it is to be received after repair. Please suggest the solution

    You can't use multiple valuation category for one material..
    You can use multiple valuation type under one valuation category.
    Suppose you have two valuation category Origin and Status.
    Origin has two valuation types 1. Domestic and 2. Imported
    And your Status has two valuation types 1. Refurbished and 2. Repairable.
    Then you can create a new valuation category as Z and create 4 valuation type under this valuation category
    1. Domestic-Refurbished
    2. Imported-Refurbished
    3. Domestic-Repairable
    4. Imported-Repairable.
    Then you can use valuation type as per your requirement. Also you can create more valuation type as per your requirement.
    Regards
    Dev

  • Any Idoc for "storage location for a material" ?

    Hi Everyone,
    Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD).
    BDC is also an option but IDoc should be a better choice.
    Thanks & Regards,
    Ankur

    Hi Ankur,
    Storage location view of a material can be created with
    MATMAS message type ( Segment E1MARDM )  . You can also use program RMDATIND with relevant data to add the storage location view.
    Cheers.

  • Open a storage location for a material

    Hi,
    how can I open a storage location for a material ?
    Is also possible to do it automatically ?
    Regards

    A storage location is customizing, this is in general open to take any material.
    depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
    if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location.

Maybe you are looking for

  • How to fix my etrecheck results?

    As you can see in my report below I have a lot of bad things on my mac-- even though I didn't think that was possible!  Can anyone help me with the step to clean this up? EtreCheck version: 2.1.6 (109) Report generated January 26, 2015 at 3:04:14 PM

  • ResultSet Class in XI

    Hi, I need to know in which jar file the ResultList class is available and how to get, I want to know all the methods in ResultList. I will add value to result list by using result.addValue, but how to remove single value. Thanks, RamuV

  • How do get gnome to run on Lion?

    I am attempting to get Gnome to run on Lion.  I cannot find the system level .xinitrc.  Any suggestions?

  • I can't get me ipad2 to sync, msg says "failed to sync"

    I can't seem to get my ipad2 to sync. I continue to get a message that reads "failed to sync". Help appreciated.

  • Backup 3.1 claims backup success but history shows error -54

    My incremental backup repeatedly fails to copy my Entourage database 120MB to my iDisk: Copied file /Users/Andy/Documents/Microsoft User Data/Office 2004 Identities/.DS_Store Unable to copy /Users/Andy/Documents/Microsoft User Data/Office 2004 Identi