Multiple structures in BEx used in CR

hi,
I have a BEx-query (P&L) which uses multiple structures.
When I open it in CR I see my key figures OK, but the other structure is displayed as one field.
I want to format my report in CR so that some fields in the structure are indented, some should be bold etc etc.
When my list of fields in the structure are displayed as only ONE field in CR this formatting will be set on all fields in the structure and that's not what I want.
I have a workaorund for this, but it's quite complex for the end users so I wonder if you have any news on if and when we will be able to get a BEx-query with multiple sttructures in CR and in CR be able to format each field in the structure in an easy way.
Kind regards
/martin

hey, i have the same problem.. whats your workaround? Can you give me a hint?

Similar Messages

  • Is it possible LSMW recording method using multiple structures

    Hi,
    can any body tell me, is it possible LSMW recording method using multiple structures
    i,e using Header details one flat file structure and Item details another flat file structures

    Hi,
    Check this link..
    LSMW multiple structure migration

  • APD using Query with multiple structures as a data source

    All,
    I want to set up an automatic process which executes a query and exports it to a shared drive as a csv file. I have tried various options , when I try to use APD to set up the extract, I get an error and this is because the query that I am trying to use has Strucutres in both rows and columns. Hence, I am unable to use this option. I tried RSCRM_BAPI, It works well, but there is an issue with scheduling this in Process chain. I created an event and scheduled this as a job to trigger after "event" as per SAP instructions, but the job does not exist and it is not possible to trigger it through the Process chain unless the variables are hard coded in the query which I do not want to do.
    Can any one tell me if there is a way to deal with APD using Query with multiple structures?
    Would really appreciate if some one can give me the right solution...
    Thanks

    Hi Tanu ,
    APD is an option but its not very good with large amount of data or hiearachies or if you have attributes in you query structure .
    One more option for this requirement is use of report program using function module RRW3_GET_QUERY_VIEW_DATA .
    This will work fine with multiple structure etc .
    There are some overheads with this FM  ex: if amount of data is too much then program will give dump .Solution for that is we call the FM in LOOP by diving amount of data need to be fetched .ex:  we can read data quarter wise.
    For using this function module what you can do is write an ABAP program (At SE38 ) .which will call this FM and then write the output into a flat file which you can save at application server (AL11) .From there other system can read it .
    To automate this whole process you can further add all the report programs into a process chain (RSPC) which can be schedule as per requirement .
    To pass input parameters you can use variants that will pass the values to the report .
    Check thi link for sample code :
    [http://www.tricktresor.de/content/index.php?navID=696&aID=496]
    Hope this will be helpful .
    Regards,
    Jaya Tiwari

  • BW BEx using a wildcard  ("*")???

    Hello BW Gurus,
    Does anyone know if it’s possible to select characteristics in BW BEx using a wildcard-like (“”) approach.  For example, if you wanted to filter on 6 digit GL Accounts that start with a 3 and end with a 1 (“31”).  I can seem to come up with anything.  As a test I’ve tried to use the customer exit and the CMOD structure:
         l_s_range-low  = ‘3000001’.
         l_s_range-sign = 'I'.
         l_s_range-opt  = 'EQ'.
         append l_s_range to e_t_range.
         l_s_range-low  = ‘3001001’.
         l_s_range-sign = 'I'.
         l_s_range-opt  = 'EQ'.
         append l_s_range to e_t_range.
    Thinking that I could use a select statement and a loop to fill e_t_range but it appears that e_t_range only holds one record at a time (i.e. BEX errors out when I try this code).
    Anyone have any ideas?

    Unfortunately I could not get the ‘CP’ operator to not work in the CMOD but if I add a a clear statement "CLEAR L_S_RANGE." to the code as in...
            CLEAR L_S_RANGE.
            L_S_RANGE-LOW      = '0000310000'.
            L_S_RANGE-SIGN     = 'I'.
            L_S_RANGE-OPT      = 'EQ'.
            APPEND L_S_RANGE TO E_T_RANGE.
    -->     CLEAR L_S_RANGE.
            L_S_RANGE-LOW      = '0000410000'.
            L_S_RANGE-SIGN     = 'I'.
            L_S_RANGE-OPT      = 'EQ'.
            APPEND L_S_RANGE TO E_T_RANGE.
    it works.  I believe the BEX variable must be defined with the multiple single select option.
    Thanks you
    Charles Harlton

  • If CSV file contains multiple structure...

    If CSV file contains multiple structures...then how should set vaules in file content conversion.
    pls mention any links regarding File Content Conversion
    thanks in advance..
    Ramesh

    Hi,
    You are using RecordSet. Here are some scenarios.
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
    Regards,
    Wojciech

  • How can  change the folder structure in Bex Analyser to match the Web

    Hi Experts,
    When I create a report using the Web Analyser and save it in My Portfolio or Bex Portfolio, I can't find the report (or folders) in Bex Analyser.
    How Can i change the folder structure in Bex Analyser to match the Web Analyser?

    Hi Reddy,
           As u have created reports and saved it in BEx portfolio or My portfolio it will be saved in the KM folder which is known as Knowledge management folder for the KM services such as feedback,rating etc.So u cant view them when u open in web analyzer.U can only see them when u save in favourites or the roles folders.
                              Hope this helps
                         Sunil Reddy

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • How to send job postings to multiple third party sites using the XML output

    Dear Friends,
    We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
    With regards
    Surya
    .

    Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
    Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
    If you would like to select more sites information select "Add Another Row".
    Then, you can see this information while "New Vacancy Creation Process".
    iRecruiter.
    Edited by: iRecruiter on Oct 18, 2009 7:43 AM

  • HT4865 How can I have multiple icloud email accounts using the same rescue email account.

    I have several Iphones for my business for managers to use.
    I would like to set them up to send me the recovery emails but it seems only one icloud address can do that.
    Is it possible to have multiple icloud email accounts using the same - seperate recovery email address?

    Unfortunately, you cannot change your primary @me.com or @icloud.com email address, you could however create an alias or create a completely new account.

  • If I have multiple apple devices and use the same iCloud login on them, shouldn't apple give us more iCloud storage for each device

    If I have multiple apple devices and use the same iCloud login on them, shouldn't apple give us more iCloud storage for each device

    Welcome to Apple Support Communities
    No. Apple only offers 5 GB of free iCloud storage for all your devices, no matter how many you have got. If you need more iCloud storage, purchase storage.

  • Is there a way to send and receive SMS on multiple cellular devices without using iMessage?

    I currently own a cellular iPad mini and an iPhone 4s and would like SMS to be the same on both devices as well as my desktop.
    After many months of struggling with iMessage, I decided to turn it off entirely.  I discovered that my best friend did not receive dozens of my texts over the span of a few months (I compared our message history side by side).  Seems like it had something to do with traveling in and out of wifi zones or possibly conflicts between our two carriers, ATT and Verizon.  Regardless, I am not willing to dive into iMessage fully until this gets sorted out.  Further, SMS is the standard message format for everyone outside of the Apple sphere, and I do not feel comfortable lumping them together into one app.  If I decide to switch to Android, will all of my contacts with iPhones continue sending me iMessages?
    Thank you for your help!

    Is there a way to send and receive SMS on multiple cellular devices without using iMessage?
    Search the iTunes App Store for any 3rd party SMS apps that may be available.
    If I decide to switch to Android, will all of my contacts with iPhones continue sending me iMessages?
    Android phones don't receive iMessages, they can recieve SMS messages sent through the iOS Messages app. The app that your contacts choose to use to send you messages is completely up to them.

  • How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

    Hi,
    I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
    http://server/pages/Default.aspx?Title=Arup&Title=Ratan
    But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
    I have followed the
    http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
    Please suggest me.
    Thanks | Arup
    THanks! Arup R(MCTS)
    SucCeSS DoEs NOT MatTer.

    Hi DH, sorry for not being clear.
    It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
    (or a Performance Point Dashboard etc.) and you insert it into your page and add
    a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
    with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

  • Insert data into multiple entities at once using a view object

    Hi,
    I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
    Is this possible? And how (if it is)?

    Hi,
    I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
    Is this possible? And how (if it is)? Peter:
    This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
    A) You have to mark the entities as both updateable (not read-only) and not reference-only.
    B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
    To turn on diagnostic, go to the IDE,
    1. Select the project.
    2. Do right mouse click and select "Project Settings..."
    3. On the Settings dialog, select Configurations/Runner.
    4. In the righthand side pane, you should see a textbox for "Java
    Options". Please add the following JVM switch:
    -Djbo.debugoutput=console
    Then, rerun. The run command should include
    -Djbo.debugoutput=console as in
    "D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
    You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
    If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
    Thanks.
    Sung

  • 3-1674105521 Multiple Paths error while using Bridge Table

    https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
    Customer Smiths Medical International Limited
    Description: Multiple Paths error while using Bridge Table
    1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
    2. They found found out by adding these 3 joins, they ended with circular error.
    [nQSError: 15001] Could not load navigation space for subject area GXODS.
    [nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
    In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
    3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
    Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
    Thanks
    Teik

    The strange thing compared to your output is that I get an error when I have table prefix in the query block:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
    ORA-38500: Unsupported operation: Oracle XML DB not present
    Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
    And if I remove it, it works:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
    Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
    Nicolas.
    PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

  • Multiple inputs and outputs using DAQmx VIs

    Hello,
    I am fairly new with the LabView programming language.  I have a few training books that I have been reading, and I have been following online tutorials and reading the forums.  However, I have come to a problem where I don’t see a clear solution.  I am using LabView 2009 (9.0f3) and DAQmx VIs.
    I am using a NI 9172 chassis PLC, with two 9201 AI cards, 9217 AI RTD card, 9472 DO card, 9263 AO card, and two 9237 AI Bridge cards.
    I am reading eight analog inputs with the 9201 cards, two analog RTD inputs with the 9217 card, three digital outputs with the 9472 card, three analog outputs with the 9263, and eight analog inputs with the 9237 cards.
    I wrote a simple program to test one digital output task, two of the analog output tasks, and a single analog input task.  I put all of them in the same while loop, and it worked perfectly.  However, when I add analog input tasks to the same loop, I get an error 200022.    So I tested each sensor individually by changing the channel before each run.  I searched error 200022 and found that this is because I cannot start another analog input task until the previous one ends.  With this said, I don’t know how to acquire an analog voltage in the same task as an analog RTD voltage.  Both inputs take different constants in the start task DAQmx icon.
    Attached is my test program.  It is titled “Test All”. This is the program I used to test the various sensors.  I tested the input sensors one at a time, and it worked fine.  A few tasks are written just to test functionality, and will be added to later.  The data is only displayed on the screen.  I will add triggers and data write to disk functions later.  This program works now, but if I add more analog inputs, it will generate the 200022 error.
    Can someone show me how to correctly write the code for multiple inputs and outputs using DAQmx?  All training materials and tutorials I can find all show a single input or single output, not multiples of each.  Thanks for looking.
    -Randy
    Attachments:
    TestAll-NI.vi ‏32 KB

    Hi RandyC,
    The Knowledge Base article Using Different Types of DAQmx Global Channels in the Same Task goes into a little more depth of what Bryan is talking about, and it also includes some example code to help show what to do.
    Hope that helps,

Maybe you are looking for