Multiple Subscription Package Confusion

I have a 400 min subscription to Australia, but find I'm using about 2 x that per month, however when I look at adding another (of the same) it appears the second dosn't kick in until the first one's billing period has expired, which dosn't really make sense as won't the first one be renewed and active again then? 
I see if I add a different (# of minutes) subscription it'd kick in immediatly after the first ran out of minutes, (what I need) but they're only available in 120min packages.
Is that the best option? It's more expensive than another 400min sub, but I just can't see how to get two x 400min subs working "back to back".

Hi Caniwi,
Upon reading FAQ's it shows that we can have identical subscriptions with the same number of minutes however it will be active once the currect one expires. If you want the minutes to be activated right away, you should choose a different number of minutes.
Support page says:
For example, if you buy a Brazil 120 minutes subscription on the 1st of the month, and use all your minutes by the 20th, then buy a Brazil 60 minutes subscription, you can start using the Brazil 60 minutes subscription right away. You don't have to wait until the billing period for the first subscription has come to an end.
For more information, please see Support Page: Can I Have Multiple Subscriptions
I hope this information is helpful.

Similar Messages

  • Multiple Subscription: 1 Landlines + 1 Landlines&M...

    Dear Support,
    I'd like to ask you what's going to happen if I buy Multiple Subscription: 1 Landlines + 1 Landlines&Mobile to the same country.
    I explain better.
    If I only have Landlines&Mobile to one country, then I've, for example, only 400 min to use to mobiles AND landlines.
    I would like to have those 400 min only for MOBILE and use the Landlines subscription to call all the landlines number - Keeping them separatelly in the same account.
    Is that possible?
    Otherwise I need to make 2 different skype account and use one for landlines, and one for mobile (that's also for landlines).
    Please let us know how it works.
    Thanks
    I'm a SEO Freelance in love with Web Marketing & Skype

    As so listed in the following faq, you will use two subscriptions both within your one account as you plan; one Landlines&Mobil 400min and the other Landlines Unlimited or more than 400min.
    +++
    If I have an unlimited subscription (for landlines) and a limited subscription (for mobiles and landlines), when making a call to a landline, which minutes will be used?
    The subscription with the most minutes at any given time will be used. So in this case, it would be the unlimited subscription as this offers unlimited* calls to landlines.
    If you have two different limited subscriptions, the subscription with the highest number of available minutes will be used.
    For example, if you have a World 400 and an Australia Landlines 120, and you make a call to an Australian landline, the World 400 would be used over the Australia Landlines 120.
    +++ https://support.skype.com/en/faq/FA10495/
    As the explanation in this faq is somewhat ambiguous or rather confusing in my view, it is not certain what will happen if you will choose Landlines&Mobil 400min and Landlines 400min. I shall look forward to hearing from the knowledgable persons in this concern.

  • HD package confusion - sports channels and Extreme HD

    I'm a recent FIOS convert from Optimum. After about 10 days I can say I am very pleased for the most part with the new service. Picture quality is better and I like the guide and DVR features better than my Optimum STB.
    The one problem I have had surfaced on the day of my installation. I ordered the Extreme HD package along with the movie promo package for 3 months. When I went to test my new gear with the Golf Channel HD it showed "not subscribed" and my installer explained that I wouldn't be getting that (or Tennis, which I also wanted) if I wasn't also subscribed to a Sport Package.
    I pulled out the channel line-up document I was given when I placed the order at  Verizon kiosk. It's the "Downstate New York August 2009" color brochure. In it there is a big red box for "Extreme HD" that says (quoting now) "EXTREME HD includes all channels in the box below & in FIOS TV Local. Additional subscriptions may be added. To order this package or other subscription packages go to verizon.com/fiostvcentral." All of the sport channels, including Golf, Tennis, NFL, etc. are listed in the box and there is nothing to suggest that additional subscriptions are needed. That's what the salesman confirmed.
    So, my poor installer guy said he couldn't do anything. I called Verizon, got shuffled around a bit, and finally got to someone who tried explaining that the brochure in my hand wasn't actually the one for the area I live in. And yet my community is one of those listed under Local Programming.
    In the end what he offered to do was to give me the additional sport package subscription for a discount for the next 12 months. At that point I was tired of spending time on the phone. But I am still not happy about it.
    Has anybody had a similar experience? It's the only black mark on my FIOS so far, but it's a pretty big one.

    Believe me, I have been over this thing with a magnifying glass looking for something like that. It just isn't there. Of course, there is the standard language at the end of the brochure that "Programming services offered within each package are subject to change..."
    Still, it feels a bit like bait and switch. I was getting Golf and Tennis (both SD and HD) in Optimum for no additional charges.

  • How do I merge multiple subscriptions to the same podcast?

    In iTunes I have multiple subscriptions to the same identical podcast (same podcast name and same url) ... some of the subscriptions have duplicated entries and some have unique entries ... (how this happened I have no idea, but that is beside the point) ... my question is how do I merge these multiple subscriptions into a single podcast subscription? I have tried cut & paste in the hope that I could then delete (unsubscribe) to all of the redundant/repeated subscriptions, but that does not work ... in explorer I have found that ALL my podcast files from ALL my podcast subscriptions are found in a single folder .. so all the entries from my multiple subscriptions are there as well ... this smoked my hope that each podcast subscription would have it's own folder or sub-folder ... so I'm stuck ... does anyone know how I can merge multiple subscriptions to the same podcast into a single podcast subscription (without my losing the uniques scattered throuhout the mutiple subscriptions) ... ???

    I would love to be able to do exactly what you are suggesting .. the problem is, if I delete the duplicate subscriptions, I lose the unique files unique to the duplicate subscription I delete ... the problem is that I can't find a way to save/move the uniques (in advance of deleting the duplicate subscription) into a single subscription ... is there a way to do this ??? Does anyone know how to do this ??? Please help !!!

  • Running multiple SSIS packages using SQL Server Agent question.

    I have a multitude of SSIS packages I want to run using SQL Server Agent.  What would the best practice be for running these jobs using SQL Server Agent?  One job per package or running all pakages from one job?  If you have an answer can
    you explain the technical reasoning behind your answer?  Thanks in advance.
    Stan Benner

    Hi, maybe a bit more analysis will give a better answer
    Do all the packages have to run in sequence? (if yes, single job better)
    Can the list of packages to be executed be grouped by dependency (ex package 1,2 and 5 must run in sequence and can be executed by one job, while package 3,4 are not dependent on package 1,2 and 5 can be run by a separate job).
    Can any jobs be run in parallel?
    How often will the package execution sequence change?
    How will you deploy your packages and job? (the more jobs to create the more install script needed and upgrade scenarios become messy).
    My personal preference:
    I create ONE ssis package which is executed by ONE sql agent job. lets call this 'PackageExecutionWrapper.dtsx'
    PackageExectionWrapper then contains multiple 'Execute Package' tasks for the packages you want to execute.
    In the package you can apply any package execution rules - which packages have to run after the other, which packages can run concurrently, which packages should only run if previous succeeded.
    If you need to change the sequence, simple, just update the PackageExecutionWrapper package.

  • Bundles can't contain multiple app packages error

    Hi All,
    I am building an universal windows application targeting to multiple platforms x86,x64 and ARM.
    However when i build my project in TFS i get following exception
    "D:\Builds\22\MDWindowsClient\MDWindowsClient_dev\src\MDWindowsClient\MDWindowsClient.Windows\MDWindowsClient.Windows.csproj" (default target) (2) ->
    (_CreateBundle target) ->
    MakeAppx : error : Error info: error 80080204: The package with file name "MDWindowsClient.Windows_1.0.0.9_x86_Debug.appx" and package full name "SMDWindowsClient_1.0.0.9_x64__8cggqpkfn886j" is not valid in the bundle because the bundle also contains the package with file name "SMDWindowsClient.Windows_1.0.0.9_x64_Debug.appx" and package full name "SMDWindowsClient_1.0.0.9_x64__8cggqpkfn886j" which applies to the same processor architecture. Bundles can't contain multiple app packages for the same processor architecture, or an architecture-neutral app package with any architecture-specific app package. [D:\Builds\22\SMDWindowsClient\SMDWindowsClient_dev\src\SMDWindowsClient\SMDWindowsClient.Windows\SMDWindowsClient.Windows.csproj]
    MakeAppx : error : Bundle creation failed. [D:\Builds\22\MDWindowsClient\MDWindowsClient_dev\src\MDWindowsClient\MDWindowsClient.Windows\MDWindowsClient.Windows.csproj]
    MakeAppx : error : 0x80080204 - The specified package format is not valid: The package manifest is not valid. [D:\Builds\22\MDWindowsClient\MDWindowsClient_dev\src\MDWindowsClient\MDWindowsClient.Windows\MDWindowsClient.Windows.csproj]
    Already this kind of error was reported here https://social.msdn.microsoft.com/Forums/vstudio/en-US/ce255209-a94b-41c1-97f6-4659f5844ce3/how-to-create-a-windows-store-bundle-by-tfs-2013-build-system?forum=tfsbuildBut found no solution to this problem
    Any help will be hugely appreciated.
    Best Regards,
    Saurav

    Hi Saurav,  
    Thanks for your post.
    Your application is Windows Store application? And you can manually build(using MSBuild) your application on build agent machine successfully?
    As this is a reproduced issue and posted to feedback site, but there’s no a solution in that old feedback and it be closed, so please resubmit this issue to Microsoft Connect Feedback portal at:
    https://connect.microsoft.com/VisualStudio Microsoft engineers will evaluate them seriously. 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Multiple subscriptions

    I have 3 subscriptions: (a) a top-up subscription for one specific country in Europe; (b) 60 minutes a month of international calls I got with Office 365 and (c) a 400 minutes a month subscription for calls within Brazil. I live in Brazil.
    Whenever I call within Brazil (i.e., a domestic call), skype first uses the credits in the 60 minutes a month I got with Office 365. I would obviously prefer it to use my 400 minutes a month (subscription c), so that I can save the Office 365 minutes for international calls from Brazil.
    Is it possible to make skype do this?
    Tks in advance,

    Hi Shahid,
    Thanks for posting here.
    I am afraid to mention that you cannot merge multiple subscriptions into one.
    Girish Prajwal

  • Do I need multiple subscriptions?

    We are delivery content to a number of regions. Each region has a Signiant drop folder on the XSAN. I want my editors to tick a box to specific which region an asset should go to.
    Currently I have Metadata Group "regional delivery list" with Boolean values(true/false) for each region. I can see that I can set up a subscription that can trigger a copy response if the value changes from false to true. But would I need to set up multiple subscriptions and multiple copy responses for each region (total of ten) for FCSvr to export the asset to the device/signiant drop folder?
    Thank you in advance.

    In the project I'm working on now I have the same issue: 7 destinations (7 folders in a server)
    If the 10 regions you have are 10 DIFFERENT folders on your Xsan then you need 1 subscription for each folder since the copy response is different in every case.
    On the other hand if you use the same transcoding in all the regions (or no trancoding at all) and you trust the people in all the regions, then you can make 1 single destination and give them access to take what they want and nothing else. (we have 7 destinations but in some there are like 10 different user that take what they need and leave the rest)
    Good luck

  • Subscriber Belongs To Multiple Subscriptions

    A user belongs to two different groups and each of them is a separate subscriber. There are also two subscriptions, each including one of these subscribers. Question is, would that user receive two emails for the same alert since they belong to two subscriptions
    both of which are configured for those alerts. Does SCOM have a priority with subscriptions where it uses the first one in a list or? As in this article
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/aadd0dc4-5497-48b6-8004-7faa72060f37/multiple-subscriptions-to-same-alert-scom-2012?forum=operationsmanagergeneral.  If not and two emails will be sent out is there a way to setup a subscription
    to exclude certain criteria rather than include? Therefore I can trim down the subscription criteria that way and prevent the other one from sending an email by using exclusions.

    For how to configure subscription in excluding certain criteria, you may refer to my blog
    http://syscentercldman.blogspot.hk/2014/09/scom-notification-subscription-exception.html
    Roger

  • Free addition to an already existing print subscription package?

    Can one provide work created with iBooks Author as a FREE ADDITION to an already existing subscription package? No rise in the subscription cost would occur if this were added. This would be a free addition for subscribers to download for free. This would act as a free digital option/addition to the print subscription. Possible? I know you can distribute the iBook Author work for free, but wanted to ask if it could be free inside of an existing subscription pacakge that is not conneted to iTunes or the iBooks store.

    Does this apply?
    http://support.apple.com/kb/HT5071#3
    Can I distribute works created with iBooks Author as part of a product or service that charges a subscription-based fee?
    Books created with iBooks Author may not be sold as part of a subscription-based product or service. iBooks Author books must be distributed free of charge or made available for sale via the iBookstore.

  • Instance Types (for subscription package)

    Hey guys,
    how can I find out which instance types (i.e. how many instaces of which type/size) I need for a specific solution? Without having purchased the subscription package yet I am not able to see this. For example, I don't know which instances I need (minimum!) for the SAP ERP EHP7 on HANA SP6. This means I can't estimate which costs will be charged by AWS... and this means I can't make a decision to buy the subscription package.
    You should really publish a list of supported instance types...?
    Kind Regards,
    Fabian

    Hi Fabian,
    every solution in CAL comes with a recommended instance type/size which has proven to be suitable for the generic use case. However, every user has different requirements so a smaller or larger size might work as well.
    I just worked through the documentation that is already available for the various solutions both on SAP Store as well as on SAP CAL when you click on User Guide. Only some of the User Guides provide the information you ask for.
    Therefore I've just worked through all solutions of the subscription package and these are the recommended instances sizes for the solutions of the subscription package:
    IDES ERP 6.0 incl. EHP6: m1.xlarge
    SAP BPM and Operational Process Intelligence on SAP HANA: m2.4xlarge
    SAP CRM rapid-deployment solution - Landscape with ERP integration: 2x m1.xlarge
    SAP CRM rapid-deployment solution for sales, marketing, and service (based on EhP2 for SAP CRM 7.0): m2.2xlarge
    SAP enhancement package 7 for SAP ERP 6.0 on SAP HANA 1.0 SP6: (did not find, need to check. very likely around cr1.8xlarge)
    SAP ERP 6.0: m1.xlarge
    SAP ERP Foundation Extension: 1x cr1.8xlarge, 1x m1.xlarge, 1x m1.large
    SAP HANA data mart discovery offer: 1x m2.4xlarge, 1x m1.xlarge
    SAP HANA, platform edition 1.0 Rev 72 (HVM): cr1.8xlarge
    SAP HANA, platform edition 1.0 Rev 72 (paravirtual): m2.4xlarge
    SAP Kanban Process rapid-deployment solution: m2.2xlarge
    SAP Mobile Apps and Infrastructure rapid-deployment solution incl. SAP Fiori: 1x m2.2xlarge, 1x m1.xlarge
    SAP NetWeaver 7.4 Enterprise Portal on MaxDB: m1.large
    SAP NetWeaver 7.4 usage type BI Java: m1.large
    SAP NetWeaver Application Server ABAP 7.4 SP5 on SAP HANA 1.0 SP7: m2.4xlarge
    SAP Supply Chain Management 7.0: m1.xlarge
    Hope this helps. Let me know if this answers your question and don't hesitate.
    Regards,
      Hannes

  • Create multiple subscriptions under Free Trial

    Hi,
    I have a free trial version of windows Azure and I want to check can I create multiple subscriptions in Free Trial?
    When I clicked on Add subscription under https://account.windowsazure.com then it gives me options like below.
    If I want to create a free subscription then what should I do?
    Thanks, Dilip

    Hi Dilip,
    It is not possible to buy Multiple subscriptions from a single account . To buy multiple subscription you may have to create multiple accounts for multiple subscriptions .
    In your scenario, you are trying to buy a subscription with azure. If you would like to make  use of a 1 month free trial please do it via
    http://azure.microsoft.com/en-us/pricing/free-trial/ - click Free Trial (or) you may activate Free trial from 
    http://azure.microsoft.com/en-us/offers/ms-azr-0044p/
    To buy a subscription click Or buy now at
    http://azure.microsoft.com/en-us/pricing/free-trial/
    Once you sign up for free trial you receive a $200 credit to spend on Azure services during the trial. You can use this
    $200 however you want to create and try out any combination of Azure resources. It enables you to explore our cloud entirely for free.
    Hope this helps.
    Regards,
    Shirisha Paderu

  • Multiple EARs packaging the same resource adapter -- Weblogic Application S

    Hello,
    I had a question regarding JNDI and deploying multiple applications (EAR's) which package the same resource adapter running on Webloigc Application Server 9.1. I have an EAR file, ear1, which contains a resource adapter with connection factory with JNDI name say 'xyz' specified in the weblogic-ra.xml file. I have another EAR file, ear2, which again packages the same resource adapter with the same connection factory with JNDI name 'xyz'. Upon activating the 2nd EAR file, I get an exception 'javax.naming.NoPermissionException: A Resource Adapter may only be accessed from within the same application from which it was deployed.', as seen below:
    <May 8, 2006 10:29:27 AM PDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating distribute task for application 'JMS2JMS_eInsightweblogic2'.>
    <May 8, 2006 10:29:27 AM PDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: java.lang.AssertionError: Internal Error occurred, Assertion Failed: No Initial Context for Jndi: javax.naming.NoPermissionException: A Resource Adapter may only be accessed from within the same application from which it was deployed.
    at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:217)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:90)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:318)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:53)
    Truncated. see log file for complete stacktrace
    javax.naming.NoPermissionException: A Resource Adapter may only be accessed from within the same application from which it was deployed.
    at weblogic.connector.outbound.RAOutboundManager.getConnectionFactory(RAOutboundManager.java:721)
    at weblogic.connector.deploy.JNDIHandler.getConnectionFactory(JNDIHandler.java:1017)
    at weblogic.connector.deploy.JNDIHandler.lookupObject(JNDIHandler.java:871)
    at weblogic.connector.deploy.JNDIHandler.getObjectInstance(JNDIHandler.java:845)
    at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
    Truncated. see log file for complete stacktrace
    It seems like the 2nd EAR is trying to go across and lookup the connection factory from the 1st EAR. Does weblogic bind the RA's connection factory jndi name in the global jndi and is not specific to each EAR? Is there some flag or switch I can turn on to make the JNDI specific to each EAR?
    My weblogic deployment descriptor for the ra looks like the following:
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/ns/weblogic/90
    http://www.bea.com/ns/weblogic/90/weblogic-ra.xsd">
    <jndi-name>JMS2JMS_eInsightDeployment4_stcbpelra</jndi-name>
    <enable-access-outside-app>false</enable-access-outside-app>
    <enable-global-access-to-classes>false</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
              <b><jndi-name>BPELConnectionFactory</jndi-name></b>
              <connection-properties>
              <pool-params>
              <initial-capacity>0</initial-capacity>
              <max-capacity>10000</max-capacity>
              <capacity-increment>1</capacity-increment>
              <shrinking-enabled>true</shrinking-enabled>
              <shrink-frequency-seconds>60</shrink-frequency-seconds>
              <match-connections-supported>false</match-connections-supported>
              </pool-params>
              <properties>
                   <property>
                        <name>BPELConnectionFactory</name>
                        <value>BPELConnectionFactory</value>
                   </property>
              </properties>
              </connection-properties>
         </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>

    Thanks for the reply... in my case this would be done by the active synch process so no GUI form is required. I will be getting a list of application ID for the user by LDAP AS. One i get it i will have to parse it and get the list of application user id. I am passing those ID;s to a workflow where I am forming the resource name as you mentioned
    for example:
    If i get user1#user2#user3 from AS i am separating them based on # using split and getting 3 different user id;s
    now i am forming a string with the resource name and passing it to the sub process in which i am checking out the user object, setting the user attributes and checking in the new view.
    user1#LDAP
    user2#LDAP|1
    user3#LDAP|2
    Problem ; When i run this user1 is getting created in LDAP but user2 and user3 are not. There entry is getting created in IDM.
    When I open the IDM object I get a yellow triangle (warning) and if I open the user object and hit save button IDM creates the user account on the LDAP.
    any help for further solving this problem would be appreciated.
    Regards,

  • How to eliminate duplicates from multiple subscriptions in iCal?

    Is there a way to eliminate duplicate entries created when subscribing to multiple calendars?  As an example - I have a subscription with each of my kids school calendars (one is in middle school the other elementary). I end up with several duplicates such as the following: 
    February 14, 2014
    * Valentines Day (calendar)
    * Valentines Day (elementary)
    * Valentines Day (middle school)
    Thanks for your help!
    -Curt

    Your specification can be interpreted more than one way.
    In the examples you give, "duplicate records" not only have the same EMPNO, but all the data is the same. If this is what you are trying to avoid, use DISTINCT. Instead ofFROM EMP_TEST Ewrite FROM (select distinct * from EMP_TEST) EThis will eliminate duplicates if and only if every column has the same value.
    Again, not sure if this is what you want but it would work for your sample data.
    P.S. I agree with sb92075, you should make EMPNO a primary key and avoid the problem altogether.

  • Run Multiple SSIS Packages in parallel using SQL job

    Hi ,
    We have a File Watcher process to determine the load of some files in a particular location. If files are arrived then another package has to be kick-started.
    There are around 10 such File Watcher Processes to look for 10 different categories of files. All 10 File Watcher have to be started at the same time.
    Now these can be automated by creating 10 different SQL jobs which is a safer option. But if a different category file arrives then another job has to be created. Somehow I feel this is not the right approach.
    Another option is to create one more package and execute all the 10 file watcher packages as 10 different execute packages in parallel.
    But incase if they don’t execute in parallel, i.e., if any of the package waits for some resources, then it does not satisfy our functional requirement . I have to be 100% sure that all 10 are getting executed in parallel.
    NOTE: There are 8 logical processors in this server.
    (SELECT cpu_count FROM sys.dm_os_sys_info
    i.e., 10 tasks can run in parallel, but somehow I got a doubt that only 2 are running exactly in parallel and other tasks are waiting. So I just don’t want to try this  option.
    Can someone please help me in giving the better way to automate these 10 file watcher process in a single job.
    Thanks in advance,
    Raksha
    Raksha

    Hi Jim,
    For Each File Type there are separate packages which needs to be run.
    For example package-A, processes FileType-A and package-B processes FileType-B. All these are independent processes which run in parrallel as of now. 
    The current requirement is to have File Watcher process for each of these packages. So now FileWatcher-A polls for FileType-A and if any of the filetype-A is found it will kick start package-A. In the same way there is FileWatcher-B, which looks for FileType-B
    and starts Package-B when any of FileType-B is found. There are 10 such File Watcher processes.
    These File Watcher Processes are independent and needs to start daily at 7 AM and run for 3 hrs. 
    Please let me know if is possible to run multiple packages in parallel using SQL job.
    NOTE: Some how I find it as a risk, to run these packages in parallel using execute package task and call that master package in job. I feel only 2 packages are running in parallel and other packages are waiting for resources.
    Thanks,
    Raksha
    Raksha

Maybe you are looking for