Multiple subscription types to the same country

I have two existing subscriptions - one is unlimited calls to USA and canada- never a problem with that- BUT I also have family in Honduras and a couple of months ago started subscribing to the 120 minutes per month plan for honduras- its a lower price than I have been able to find anywhere. well I always go over the 120 minutes and eat into my regular skype balance- then this morning I was inquiring if I could just buy TWO subscriptions to Honduras (Two 120 minute) in my research I discovered this was possible and I went ahead and purchased a second subscription for Honduras. Later today my first subscription had been completely used and I thought the second subscription would kick in but it still took the money from my regular account- I went back and verified that my subscription appears to be in place but not sure WHY it was not used today-- do they all start on the same day? do I have to wait until next month to have the full benefit of two subscriptions? can you reply to my email maybe? thanks fd

Thanks for the response. While I do not dispute what is in the manual, this is not what I observed on my account. Perhaps, the system does not comply with the manual. A system defect perhaps? I would urge you to try it yourself. Here are the steps, if you want to try to reproduce:1. Buy the more expensive 'Mobiles & Landlines' subscription first. The country that I used was South Africa.2. Buy a 'Landlines only' subscription to the same country. Note that you will get a warning screen telling you that you are buying mulitple subscriptions to the same country. Choose to continue3. Make a landline call to that country4. View your account. Specifically look at the remaining minutes on your 'Mobiles & Landlines' subcription. There should be no decrease in minutes. If there was, we have ourselves a bug/defect. Anyway, I have cancelled my 'Mobiles and Landlines' subscriptions. Oh, by the way, I did notice that Skype rounds to the minute. So for a call lasting 4 minutes and 1 second, Skype will deduct a full 5 minutes from your subscription's minutes.

Similar Messages

Multiple subscriptions that are the same seem to b...

Hi-
I had an Unlimited US & Canada subscription and then redeemed a voucher for the same thing. I expected the term of my subscription to be extended by a year. But it seems that, instead, I have two of the same subscriptions running at the same time. What can I do to correct this?
Thanks!
Mitch

Hi Mitch,
please contact eBuyNow and they will replace the voucher you received previously with one that will properly extend your subscription.

SharePoint 2013 List - Multiple Data Types in the Same List

In the same SharePoint 2013 list in Data Sheet View, I want to have one column where my end users enter inputs for KPIs. There are 3 groups of KPIs (A, B and C) and they each have different data types (A-string, B-decimal, C-percentage) and I want to be
able to base their input options off of the KPI type
Does anyone have any suggestions on how I can leverage my parent-child relationships so when an end user...
1. Picks KPI type A, they can select from a choice filed (Green, Yellow, Red)
2. Picks KPI Type B, they can enter a decimal (-1.000 to 2.000)
3. Picks KPI Type C, they can enter a percentage (-100.00% to 100.00%
I'm using if I want to keep this in one list, one column and in data sheet view that the out of the box solutions won't meet my requirements. I was looking at some solutions from Bamboo (Lookup Selector Column) but don't think that applies here.
Thanks!
Johnny

Hi Johnny, you can accomplish this using cascading lookups in InfoPath if that program is available to you. Otherwise, if you want a 3rd party product, we use the Kwiz cascading lookup and it's worked wonders for us:
http://www.kwizcom.com/sharepoint-add-ons/sharepoint-cascading-lookup-plus/overview/
Note: I have no relationship with Kwiz, just vouching for the product.
cameron rautmann

HCM Absence types- need to display in different languages in the same country based on user language preference

Hi
We are implementing in Belgium where we need to have absence in both dutch and French for the different user sets. Is there anyway to set up one absence type but have the different translations for the different user groups. There was a document ID 1619320.1 that referred to the fact that if the absences were created by a seedfile then they would be translated. Has anyone come across this issue whereyou need to display the same absence type for more than one language in the same country and how did you do this or did you have to set up separate absence types in the different languages which I do not want to do
thanks

Hi Parker
If you are using Captivate 4 multi languages is a
posibility..
Set a User Variable to pass the language you want to a Flash
SWF whic is embeded (This can play and hold multiple audio tracks).
For example Captivate 4 will pass "french" to the embeded flash SWF
which will play the "french" track.
OR
you could just use branching ;)
Cheers.. Aquil0

Multiple leave requests on the same day

We would like to enforce a check so that multiple leave requests of the same type cannot be submitted for the same day on ESS.
How can this be achieved ? We are on EP 7.0 and ECC 6.0 and are using webdynpro java version of the ESS applications.
Any configuration available for this or does this require a BADI implementation ?
Thanks in advance.
Thank You,
Raj

http://wiki.sdn.sap.com/wiki/display/ERPHCM/ValidationsforESSLeaverequest
read here, it requies a badi implementation only, no config is available!
You have to call backend exits from the badi of leave request
Edited by: Siddharth Rajora on Aug 2, 2011 7:48 AM

Multiple ALV Grids on the same window.

Hi,
Can someone tell me if it's possible to display multiple ALV grids on the same window.If so how is it done.Please note that I am talking about Grid Display and not List Display.
Regards,
Swathi Balakrishnan

Hi,
This can be done even i have done a report.
Its very simple create three containers as below.
Just repeat three times if u need to create three containers.
See this sample code using custom container.
START-OF-SELECTION.
Begin of process logic
CALL SCREEN '0100'.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'SALESTTL'.
A L V    G R I D
IF o_grid_container IS INITIAL.
    CREATE OBJECT o_grid_container
      EXPORTING
        container_name = '<b>CCONTAINER1</b>'.
    CREATE OBJECT o_grid
      EXPORTING
        i_appl_events = 'X'
        i_parent = o_grid_container.
<b>FOR first A L V    G R I D</b>
    PERFORM set_grid_field_catalog
                CHANGING i_grid_fcat.
    PERFORM modify_grid_fcat_predisplay
                CHANGING i_grid_fcat.
    PERFORM set_grid_layout_set
                CHANGING struct_grid_lset.
    PERFORM sort_outtable CHANGING i_sort_fcat.
PERFORM populate_grid_data TABLES i_grid_outs i_grid_outs_pro.
    SORT i_grid_outs BY year month.
    CALL METHOD o_grid->set_table_for_first_display
      EXPORTING
        i_bypassing_buffer    = space
        is_variant            = ws_f_grid_disvar
        i_save                = ws_c_grid_save
        is_layout             = struct_grid_lset
      CHANGING
        it_outtab             = i_grid_outs[]
        it_fieldcatalog       = i_grid_fcat[]
        it_sort               = i_sort_fcat.      " Period
ENDIF.
IF o_grid1_container IS INITIAL.
    CREATE OBJECT o_grid1_container
      EXPORTING
        container_name = '<b>CCONTAINER2</b>'.
    CREATE OBJECT o_grid1
      EXPORTING
        i_appl_events = 'X'
        i_parent = o_grid1_container.
*<b> FOR SECOND ALV GRID</b>
    PERFORM set_grid1_field_catalog
                CHANGING i_grid1_fcat.
    PERFORM modify_grid1_fcat_predisplay
                CHANGING i_grid1_fcat.
    PERFORM set_grid1_layout_set
                CHANGING struct_grid1_lset.
    PERFORM sort_outtable1 CHANGING i_sort_fcat1.
PERFORM populate_grid1_data TABLES i_grid1_outs i_grid1_outs_pro.
    SORT i_grid1_outs BY year month.
    CALL METHOD o_grid1->set_table_for_first_display
      EXPORTING
        i_bypassing_buffer    = space
        is_variant            = ws_f_grid_disvar
        i_save                = ws_c_grid_save
        is_layout             = struct_grid1_lset
      CHANGING
        it_outtab             = i_grid1_outs[]
        it_fieldcatalog       = i_grid1_fcat[]
        it_sort               = i_sort_fcat1.      " Period
ENDIF.
IF o_grid2_container IS INITIAL.
    CREATE OBJECT o_grid2_container
      EXPORTING
        container_name = '<b>CCONTAINER3</b>'.
    CREATE OBJECT o_grid2
      EXPORTING
        i_appl_events = 'X'
        i_parent = o_grid2_container.
<b>FOR THIRD ALV GRID</b>
    PERFORM set_grid2_field_catalog
                CHANGING i_grid2_fcat.
    PERFORM modify_grid2_fcat_predisplay
                CHANGING i_grid2_fcat.
    PERFORM set_grid2_layout_set
                CHANGING struct_grid2_lset.
PERFORM populate_grid2_data TABLES i_grid2_outs i_grid2_outs_pro.
    SORT i_grid2_outs BY year month.
    PERFORM sort_outtable2 CHANGING i_sort_fcat2.
    CALL METHOD o_grid2->set_table_for_first_display
      EXPORTING
        i_bypassing_buffer    = space
        is_variant            = ws_f_grid_disvar
        i_save                = ws_c_grid_save
        is_layout             = struct_grid2_lset
      CHANGING
        it_outtab             = i_grid2_outs[]
        it_fieldcatalog       = i_grid2_fcat[]
        it_sort               = i_sort_fcat2.      " Period
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
As the events are registered as application events, control is first
passed to the program's PAI. The call 'cl_gui_cfw=>dispatch' will
forward control to ABAP object event handling and the appropriate
event handler will be called (if present). This allows the user to
selectively process events.
DATA: i_return_code TYPE i .
CALL METHOD cl_gui_cfw=>dispatch
      IMPORTING return_code = i_return_code.
save_ok = ok_code.
CASE save_ok.
    WHEN 'BACK' OR 'END' OR 'CANC'.
      PERFORM exit_program.
ENDCASE.
CLEAR save_ok.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form EXIT_PROGRAM
      text
FORM exit_program.
CALL METHOD o_grid_container->free.
CALL METHOD o_grid1_container->free.
CALL METHOD o_grid2_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
    Error in FLush
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM.                  " EXIT_PROGRAM
If u want get more idea revert back to me.
Thanks & Regards,
Judith.

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

Qemu/kvm: multiple USB devices from the same vendor

Hi fellow gurus,
Trying to pass-through two USB devices. One works just fine, but two produces an error.
They are the same type from the same vendor and libvirt seems to have no way to differentiate between the two, as it only uses the <vendor id='0xnnnn'/> & <product id='0xnnn'/> strings and not serial number of the device.
There is a reference -unanswered- here: https://bugs.launchpad.net/qemu/+bug/1090602
The error message from virt-manager:
Error starting domain: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
Detailed output
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper
callback(asyncjob, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in tmpcb
callback(*args, **kwargs)
File "/usr/share/virt-manager/virtManager/domain.py", line 1063, in startup
self._backend.create()
File "/usr/lib64/python2.6/site-packages/libvirt.py", line 678, in create
if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self)
libvirtError: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
The devices themselves:
Bus 001 Device 009: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 008: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Is there any workaround or fix for this?
Cheers,
Mike.
Last edited by DrMikeDuke (2013-07-22 14:01:18)

As I understand it, host:bus.addr is an alternative to host:vendor_id:product_id. So if I wanted to pass both of these thumb drives:
$ lsusb
Bus 001 Device 002: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
Bus 001 Device 003: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
I would use host:001.002 and host:001.003 . Note I said would use, because I've never tried it.
And usb_add is a qemu monitor command. See sections 3.4 and 3.5 of the doc you linked for info on the monitor.
All this being said, I don't use libvirt stuff so I don't know if it has the capability to specify USB devices by bus.addr or whether or not it enables the monitor.

Multiple presentation servers using the same RPD

Hi everyone,
So as most people know, the iPhone has a cool app that allows you to login and look at your OBIEE content. In theory it's really cool, but as it turns out, a lot of the cool graphs default to Flash and Flash is not supported by the iPhone.
Using a flag in the instance config file, its possible to default all graphs to png's instead of Flash. But that causes all the interactive drillability to go away since it's just a flat picture.
It seems that an elegant solution to this issue would be to have two presentation services running; one that defaults to Flash and one that defaults to png's. Then let the OC4J container determine if the device accessing the website is a mobile device or a full client browser. Mobile devices get routed to the png's and non-mobile devices go to the standard Flash page.
Although not supported by Oracle, it is possible to setup multiple presentation services on the same server. In fact, RNM has a great blog about how to accomplish this (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/).
I was able to setup two presentation services (AnalyticsWeb and AnalyticsMobile) and point them at the same catalog folder. That way you don't have to duplicate you're work.
The one thing I couldn't figure out how to do was to point them at the same RPD file. Ideally, we would have one rpd file with the master metadata definitions, and both presentation services would drive from that single RPD. However, the BI Server throws and error of the same RPD appears twice in the NQSConfig.ini file. I also created a shortcut to the master RPD, but upon startup, the BI Servers said that it was not a valid repository file.
Worst case scenario, I could just use copy & paste to duplicate the single repository. And then each time I updated one, I would just need to delete the other and re-copy. But that seems a little tedious and I was hoping for a more elegant solution.
Does anyone know how I could get the NQSConfig.ini to let me point to the same RPD twice? Is there some kind of symbolic link or image I could create?
If it helps, I'm working with OBIEE 10.1.3.4 on a Windows Server 2003 environment with the OC4J standalone container.
Thanks for the help!
-Joe

Hey Everyone,
Just to add the finishing touch to this thread, the following can be implemented to perform the redirect based on mobile versus traditional PC devices.
In the folder: C:\OracleBI\oc4j_bi\j2ee\home\default-web-app
I created the following OBIEE.html file
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html lang="en,us">
<HEAD>
<TITLE>Test OBIEE Redirect Page<TITLE>
</HEAD>
<BODY>
<script type="text/javascript">
var agent = (navigator.userAgent).toLowerCase();
var weburl = './analytics/';
var moburl = './analyticsMobile/';
var reg_exp = /(ipod|iphone|android|opera mini|blackberry|palm os|palm|hiptop|avantgo|plucker|xiino|blazer|elaine|windows ce; ppc;|windows ce; smartphone;|windows ce; iemobile|up.browser|up.link|mmp|symbian|smartphone|midp|wap|vodafone|o2|pocket|kindle|mobile|pda|psp|treo)/;
if( reg_exp.test(agent) ) {
window.location = moburl;
else {
window.location = weburl;
</script>
</BODY></HTML>
The javascript gets the USER agent variable and does a regular expression match to see if it's any popular handheld device. If so, it redirects them to the mobile address. Otherwise the user is directed to the standard site.
All I need to do is pass around the URL:
http://localhost:9704/OBIEE.html (instead of the standard http://localhost:9704/analytics)
And users will be dynamically sent to the correct location.
thanks everyone!
-Joe

Question about multiple resource objects using the same OID target account

In Oracle Identity Manager 11g with OID connector as a target system.
Is it possible to create multiple resources that use the same OID IT Resource. Each resource is responsible for provisioning certain OID attributes of the same OID account. For example 'OID User' would provision the basic account and a separate resource called 'Department1 User' would provision attributes not provisioned by OID User.

Yes, definitely. Here is how it would work:
- You would have to make sure that the resource OID User always gets provisioned first, so that the account exist when these additional attributes are being set for the user via the other resource Department1 User. You can do this with Resource Dependency in OIM.
- Now for using the same IT Resource, just create the new form and in the IT Resource type form field, map the properties to the same IT Resource Definition, so when the Provisioning Process gets invoked it uses the same IT Resource instead.
Thanks
SRS

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

How do I use multiple local workspaces for the same website in VS2013?

For quite some time I've been using VS2010 with multiple workspaces mapped from the same TFS branch to test different variants of a website in parallel. The internal web server (Cassini) seems quite happy to run multiple versions and simply maps a new port
number for the second and subsequent instances that start up.
We are now looking to move to VS2013, so have to use IISExpress since the 'internal' web server is no longer provided.
How do I configure things so that if I open a single workspace, IISExpress runs against that workspace using the default port number (specified in the solution), but if I open a second instance in a different workspace it correctly uses a new port number
and working folder. Do I need to invoke IISExpress using the command line (presumably from each workspace) and specify the relevant defaults or is there some way to enter this in the local config file for IISExpress?
My initial attempt at editing to config file resulted in the 2nd and subsequent instance using the same physicalfolder as the first instance, presumably because the speficied site name and port number are the same!

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Based on your description, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
or IIS forums: http://forums.iis.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to load multiple HTML5 canvas on the same page (the proper method)

Hi,
I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
Here is a sample of what I'm doing:
1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
3rd: Edit the javascript like this:
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsFirst = createjsFirst||{};
            var createjs = createjsFirst;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/first.js"></script>
        <script>
            function initFirstAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("firstCanvas");
                exportRoot = new libFirst.first();
                stage = new createjsFirst.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                createjsFirst.Ticker.addEventListener("tick", stage);
        </script>
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsSecond = createjsSecond||{};
            var createjs = createjsSecond;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/second.js"></script>
        <script>
            function initSecondAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("secondCanvas");
                exportRoot = new libSecond.second();
                stage = new createjsSecond.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                createjsSecond.Ticker.addEventListener("tick", stage);
        </script>
<body onload="initFirstAnimation(); initSecondAnimation();">
Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
Many thanks!
#flash #reborn

I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
$(document).ready(function () {
        var canvas, stage, exportRoot;
        // First movie
        canvas = document.getElementById("firstCanvas");
        exportRoot = new libFirst.first();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libFirst.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Second movie
        canvas = document.getElementById("secondCanvas");
        exportRoot = new libSecond.second();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libSecond.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Third movie
        canvas = dument.getElementById("thirdCanvas");
        exportRoot = new libThird.third();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libThird.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);

How can I solve the problem, that an album that I have given as a present via iTunes cannot be used outside my country of origine (I live in the same country as the person that has received the present)?

Hi iTuners, I have a problem with one of the products, which I have bought as a gift in the iTunes-Store and have let it be sent to my girlfriend. We are both living in the Netherlands, but the system doesn't allow her to download her gift, giving her back the error message "Only clients in Germany can use this voucher" - CAN YOU PLEASE HELP ME?

She won't be able to redeem that gift unless she moves to Germany and has a German billing address on her account - all gifts are country-specific, they can only be redeemed on accounts that have the same country on them as the person sending them, and they need to be in that country to redeem it. If you've been charged for the gift then you can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
As you are in Netherlands then you need to update your country and billing address (and payment method if you are using a German credit card) on your account to be your Netherlands address - a store's terms of use state that you need to be in the country to use its store. You can update the details on your account via the Store > View Account menu option on your computer's iTunes

Can multiple people post on the same shared photo stream?

Is there a way to have multiple people post on the same shared photo stream?
My cousin would like to have a single shared photo stream where we can both post photos on it and comment, instead of having two separate shared photo streams.
We think that there should be an option for the album creator to give access to anyone he/she shares it with to enable them to also post pics on the same stream.

The only link I have is to manage your team account http://forums.adobe.com/thread/1460939?tstart=0
The only Adobe program/process for team work that I know of is Adobe Anywhere, but that requires a very different process
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
http://www.creativeimpatience.com/adobe-anywhere-enterprise-solution/

Multiple subscription types to the same country

Similar Messages

Maybe you are looking for