Multiple System Administrators

Is it possible to create multiple system administrators within MDS?
Say we have three administrators who all manage MDS. When a new model is created, it seems like the only MDS administrator will need to add the other two as model administrators each time a new model is added.
Is there an easy way around this by scripting it out using the stored procedures like: [mdm].[udpUserGroupAssignmentSave]?
Thanks,
Reeves
Denver, CO

You are not doing anything wrong, presently to have Administrators other than the Appliance Admin you will need to create them locally. The LDAP import of users from eDir and AD does not allow for specific DIR Admins to then have Admin rights on the Appliance. LDAP users are imported for features such as Mobile App auth and for auto install of printers, for example...
This has been raised before but the appliance is designed in a way that Admin users should be created locally so they exist in their own container to avoid any potential issues.

Similar Messages

Fiori: incorrect alias used when multiple system aliases assigned

Hello all and Masayuki Sekihara
I'm implementing SAP Fiori PO/PR/Contract approval.
There is only 1 gateway system currently in order to support 4 ECC systems.
(Sandbox, development, quality and production)
Everything is working correctly when assigning only one (Sandbox) SAP system alias to the gateway service of PO approval for example.
However when we assign multiple system aliases and set the sandbox system alias as default things go wrong.
(Currently IW_BEP is not yet installed on the development; Quality and productive system)
And we noticed the service is resulting in an error message because these BEP function modules can not be found on the target system.
However the issue is that it should not call these systems as we have flagged Sandbox system as default.
Anyone has an idea or note for this?
(We temporary fixed this by assigning only a single alias to the services).
But in a later phase we want to add all in order to be able to test on all systems and run production as default.
Thanks for your help.

I don't want to use the MOC.
I want the behaviour like mentioned in the note:
The default system is used whenever the service is not called as MOC. If you have defined more than one default system alias, the first system is used as the default.
How can I achieve this?
According to my understanding now I should make sure ";m"o is not added to the URL, but how can this be achieved?
Thanks!

MBAM System Administrators - Missing Manage TPM and Drive Recovery option - MBAM 2.5

I have installed MBAM 2.5 in a 3 server environment. Every thing is working fine and validated the installation.
But what I have found that the drive recovery tab and Manage TPM is missing for the users member of MBAM System administrators. As there are many changes that comes with MBAM 2.5 and one is exclusion of MBAM local groups.
Everything is perfect for the Advanced Helpdesk and Helpdesk users.
Gaurav Ranjan

Hi Gaurav,
As you mentioned, there are no local groups anymore. During configuration of the Admin portal, you specify AD groups for administration. We removed the System administrators group because it was kind of redundant. You could get the same
effect by adding the user to the Advanced Helpdesk and Reporting Users AD groups you specify. So, if you add whatever user you wanted to be the "system administrator" for MBAM to both of those AD groups, that should solve your problem. Note you
may have to log out of your machine and back in after adding them to the group so that they get the token, as with any AD group addition.

How can I create manual Y-axis labels in a multiple system report?

A similar question was asked by Lutz1410 on 3/30/07, but it doesn't seem that this was finally resolved. I'll try to ask the question in a different way.
I created a graph in View with 3 axis systems in the "multiple systems" mode, then transferred this to Report. I would like to apply manual scaling and text to each of the 3 axis systems, however if I change either of these parameters they are applied to all 3 Y-axes. In other words, I end up with 3 axes having exactly the same text labels and scaling.
1. For the axis text, is there a delimiter that can be used in the axis text field to tell Report that the first text value is for the first Y-axis, the 2nd value is for the next axis, etc?
2. For the scaling, is it possible to have separate scales for each Y-axis?
Of course, a workaround is to create 3 independent graphs in Report, but this is less convenient.
Thank you,
Craig

Hi Craig,
If you want to apply different manual scaling parameters to each of the stacked Y axes, then you need to use 3 separate Y axes. If you want to display a curve-specific text to each of the stacked graphs, this you can do with a DIAdem expression:
@ChnName(CCN)@@         channel name of each curve
@ChnDim(CCN)@@            channel unit of each curve
@ChnComment(CCN)@@   channel description of each curve
The corresponding value for each curve will automatically display at the correct vertical spot next to its curve.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Different manual y-axis in multiple systems

Hallo,
i "ve some problmes to generate a report in Diadem. I have measured values, 600.000 datapoints in 2 channels, current and pressure. The measured values are in a wide range, but i have to lock for the small signal behaviour, so i have to zoom in small x/y areas. The founded points of interest must documented, so i use the function "transfer to report". While i look the data in n-systems i get a report with lines in multiple systems. The problem is the Y-scaling, the scaling is automatically to the whole range of the data, but i want the Y-scalling of the small y area. If i want to rescale manually i found only 1 y-axis, but i see two different y-axis. After rescale manually the scaling is for both axis the same. If i go back to automatically scalling the scaling is different but the same porblem like before, scaling to whole datarange.
How is it possible to have two different manual y-scallings in a multiple systems diagramm with two data-tracks.
best regards
Lutz

Hi Lutz,
I sort of understand what you're talking about, and this sounds like something we should be able to configure correctly in REPORT. I won't fully know what you mean until you send me a data set and the TDR layout file that you're struggling with.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Multiple system maintenance cycles are not shown in pop up for selection

Hi,
In change manager, when we create a change document from a change request, we dont get a pop up for selection of maintenance cycles with multiple systems in it.
The change document is getting created by taking the only available maintenance cycle with only that system.
Is there any configuration for this?
Regards,
Dipti Sawarkar.

Hi Christian,
Thanks for your reply.
I know the pop up will come only when there is more than one maintenance cycles for that production system.
I have done configuration for Normal correction.( SDMJ) and customized it (ZDMJ).
When I try to create a CD* from CR* for a particular production system ( CCP) , it just takes up a maintenance cycle for CCP system and doesnt show up any pop for selection of maint cycles whereas I have created 5 maintenance cycles for this system CCP.
The other 4 maintenance cycles have multiple landscapes (CCP and EAP )in it whereas this one (which gets selected by default) just has CCP landscape in it.
The strange part is that when I try to create a stand alone CD ( without CR ) , it will give that pop up showing all 5 maint cycles. But this is not happening when I create a CD from a CR.
I have never done/ seen configuration for the pop up of selecting maint cycles in ChaRM.
Looking forward to ur help,
( *CD - Change Document and * CR - Change Request)
Regards,
Dipti Sawarkar.

Running JMS Client Programs on Multiple Systems?

Has anyone gotten JMS to work on Multiple Systems
using Windows 2000 on both systems? The JMS Tutorial
doesn't seem to work for me even if I repeat the steps
over an over again (maybe it's incorrect)?
Well, anyway, what I'd really like to do is to run
JMS between different systems using tcp/ip. Is this
possible?

Hey There,
Same thing happens to me. Since your message and others went unanswered, I am being to think this is a dirty little secret.

RAR - SU24 Config Updates - Multiple Systems

I was in the process of updating the SU24 data within RAR and was wondering how GRC differentiates between a transaction that exists in multiple systems. Typically only technical transactions would exist across systems, but this may not always be the case.
I can't say with 100% certainty that a tcd that exists across systems will be maintained with the same SU24 data. Nor can I say that it "ALWAYS" should have the same SU24 data.
When you upload the SU24 data from multiple systems and the same tcd/auth object/auth values exist, will the values be overwritten as you upload the text files for each system? I'm assuming yes? If this is the case, you would have to be cautious to the order in which you upload the text files per system.
We use SRM, BI, PI, and ECC. Any comments would be appreciated.
Thanks,
Rich

yes the text files do not have the SID but when you upload those files in RAR you specify for which system you are uploding it. By selecting the system from drop down you tell GRC for which system the SU24 data is for.
Thank you,
Partha

Script to Rerun Successful Advertisement on Multiple Systems

Hi Guys,
I need to rerun a particular advertisement for a package on multiple computers. I Am able to run it on a single system via the right click tools but how do it do it for multiple systems.
Is there a script for this which could be provided ?
Many Thanks

If you right click on the deployment in the monitoring node and select rerun deployment you will get something like the below from the right click tools by Now Micro
You can then select the group you want and hit Start.
Another option would be to set the deployment properties to Always run the program, but this would make all devices always rerun the deployment.
If you wanted to be able to select specific devices then you will probably need to script yourself something unless someone has already done it.
You could start by looking at Deployment - Rerun Deployment.ps1 that's installed by the right click tools.

ALE-Idoc -Is It possible to distribute Trnsaction data to multiple system ?

Hi Guys,
Is it possible to distribute transactional data to multiple system using ALE?
If yes ,How ?
Will u pls guide me?
Regards

Hello,
This is perfectly possible when you use a distribution model for your message types in BD64.
Per message type you can indicate multiple destination systems in BD64.
Of course you need to maintain all the partner profiles.
More on the SAP help pages:
[http://help.sap.com/saphelp_erp2005/helpdata/EN/0b/2a610f507d11d18ee90000e8366fc2/frameset.htm|http://help.sap.com/saphelp_erp2005/helpdata/EN/0b/2a610f507d11d18ee90000e8366fc2/frameset.htm]
Wim

(RFC vs files), where Sender SAP and receiver multiple system

Publish and Subscribe using BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
This is my 1st BPM scenario in sandbox system
For this scenario
I Created 2 Data types
2 MT,
Service interface:
Request interface Mode:Asynchronous
Abstract Req interface,Mode:Asynchronous
Response Interface,Mode:Asynchronous
Abstract Respomse Interface ,Mode:Aysnchronous
Synchronous Interface ,Mode:Synchronous
2 Message mapping for Req and Resp
1 Operation Mapping
BPM design: Plz find the attatchement
Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
It will be good if anyone send the BPM design flow for this.........
can we do this scenario without BPM?
Regards
A.Muni kumar
Edited by: Muni 1234 on Jan 31, 2012 10:24 AM

Hi
Receiver is FTP only.....
SAP side is RFC.........
RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
Sender: RFC
Receiver: File
1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
if above is the case then you can achive this without BPM also..
Yes...its condition based routing...
I Used async in this scenario.....sender side configurations also done....
But when when I am triggering BAPI from SE37 I am getting an error
Exception SYSTEM_FAILURE
Message ID: 00 Message number: 341
Message:
Runtime error CALL_FUNCTION_NOT_FOUND has occurred
How to Solve this????
I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
Connection is Ok
Or we need to create proxy for MI and report for this?
Edited by: Muni 1234 on Feb 1, 2012 8:38 AM

Is Sun Ray a suitable solution for system administrators?

My company is deciding if Sun Ray can be a viable solution for system administrators for additional level of security since Sun Ray clients are diskless...less worries about malware or virus...etc.
However, looking through Sun's available thin client machines, there is no selection of laptop form. As you can guess, sysadmins are mostly remote and on the go...it cannot be expected that they are always at their desks or homes to access the thin client machines. I understand the availability of the web client solution...however, have my doubts about that and how much would sysadmins actually embrace it.
On the other hand, the inability of copy & paste as they are currently doing with traditional thick clients can be problematic too. One use case is when they test and build config on their desktops (say notepad), then upload to server hosts...or opposite, when they need to download logs to their machines and investigate...
I am not going into questions about support of OS X and other tools sysadmins usually use...since the support of true remote access will be the biggest hurdle up front.
Any comments?

Hmmm. Very late to this conversation, but couldn't help to throw some change into the hat.
For casual use of light-weight, non-power hungry applications, running apps via SGD over a Sun Ray (soft client or not) is probably ok. But if you were to try to do this for normal users who need PC-like performance, you'd be delusional. Display information will travel over the network 3 times and you can't take advantage of any of the new, faster graphics capabilities of the newer Sun Ray's when you introduce SGD as the means to access Windows desktop applications.
To be explicit:
Sun-Ray -> Sun Ray Server uses ALP.
Sun Ray Server -> SGD uses AIP.
SGD Server -> Windows Server uses RDP.
If you deploy this widely, better go buy some stock in Cisco.
I'd use SGD only for remote PC/Mac/Unix users who need to bounce in from the wild west.
I'd use Sun Ray -> Sun Ray Servers + Windows connector (uttsc) for thin client access.

BAM report from multiple systems...

Hi guys, just wanted to know if we can actually get the data from multiple systems and then generate a BAM report on those data??.Is it possible? and if so then can anyone show me the way.
many thanks,
Rajesh.

One option is create external data sources, though Oracle recommends that you only use these for data that does not change very much (since it does not go through the ADC, instead must be continually polled). http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bam_extl_data_sources.htm#CIHJFDAG
Another option is to create a simple BPEL composite that picks up the data from the various systems and sends it to BAM. In general, BAM is more efficient when data is sent to it, not when it has to get the data. (there are also other options including JMS, etc.)

Duplicating photos from multiple systems

It appears that Photos doesn't check for duplicates when running on multiple systems. Every time I open it on a new Mac, it duplicates every synced photo from my iPhone so I have 3 copies, each with the same name and identical metadata, all synced in iCloud.

Hi macitect,
To make it easy for you I would export all the photos you want to use and create a new library to import them into. this will be your book library.
When you are done making your book and ordering it you can delete the book library or burn the library to disc in case you want to order another book at a later date.

Trying to Sync Multiple Systems

I am having great difficulty with iSync across multliple systems. I will admit that this may be due to my own misconception about what sync is suppose to be so let me explain what I have, what I think should happen then what is happening:
Work Setup: 1 laptop
Home Setup: 1 laptop, 1 desktop
iPhone: of course ...
Having multiple systems is great. A corporate mac laptop keeps me on the move in the office, my private laptop provides me mobility out of the office and my home desktop is where I do most of my work while home. The home desktop has a couple web pages on it, so it is up 24x7. The two laptops come up for periods of time the go down.
Understanding: Turn on sync, settings to automatic, and when I make a change on any one of the systems, it gets immediately pushed to the cloud, to my phone, then back down to the other 2 systems I am not currently on.
Reality: every system fights for superiority over every other system. Every time one of the systems sync, it completely messes everything up. Here is a great example. Friday before leaving the office I created a Group calendar called "Work Group". I placed a couple existing calendars under this group and made a couple new ones. It appeared to sync to my phone OK so I believed all was well. When I got home I discovered that the desktop (which is on 24x7) had not updated based on the information obviously pushed to the cloud by my office machine (I say obviously because it did make it to my phone). When the synchronization did appear on the desktop, 2 of the work Calendars were moved into a new Group called "Group". When I checked on the cloud by logging into my mobile me account - I couldn't even recognize the format the calendars were online. Having to have brought my work laptop home for the weekend I looked at it and WTH? The calendars on that machine looked exactly like the calendars on my desktop before it did a partial sync. Now the work laptop fired a sync and it warned that there were numerous conflicts that had to be manually resloved. Surprise surprise, same thing on the desktop.
It would seem to me a simple thing to flag records that hand changed and Synchronize only those records updating the cloud. But, it appears that the entire calendar database is being pushed by every machine every time it synchronizes. So it is a push more than a sync. This is quite infuriating.
I find it hard to believe that Apple could have made such an egregious error in programming logic so I can only come to two possible conclusions. (A) My expectations and configuration settings are incorrect or (B) Apple is hiring Microsoft employees. God oh God please let it be (A).
Can someone provide insight?

iSync is only for syncing Contacts and Calendars to non-Apple mobile phones via a local USB or Bluetooth connection.
http://www.apple.com/macosx/features/isync/index.html
iSync does not sync anything between Macs, the iPhone, or to the MobileMe 'cloud'.
(The only connection iSync has with the above, is providing a UI to turn on system-wide syncing and to reset it.)
Rather than iSync, what you are using is MobileMe Sync, and the forum for that is here:
http://discussions.apple.com/forum.jspa?forumID=957
How you expect the syncing between multiple Macs and your iPhone is exactly how it should be working, and is designed to work. So something in your particular setup is not right.
I'd suggest posting in the above linked forum where all the MobileMe Sync gurus should be able to help.

Multiple System Administrators

Similar Messages

Maybe you are looking for