Multiple Systems hooked to a Bose CineMate digital surround system

I really like this system and I was wondering if it is possible to hook it up to more than just your TV. I really want to be able to press a button and have it play my XBOX or a DVD player to, instead of just the TV. Thanks, I really need some input on this because I can't find any information on it anywhere.

Best Buy sells a a video switcher from RCA more details
I know you don't need the video switching portion, but I don't believe BB sells just and rca audio switcher. This device should solve your problem.
Disclosure: Former BBY employee.

Similar Messages

Connecting Bose Cinemate System to Panasonic TC-P50G20

I just purchased a Panasonic TC-P50G20 Plasma 50 inch TV last week at Best Buy. I had my Bose Cinemate hooked to my old Vizio. Does anyone out there know how this is done? Let me know. Thanks.

what is the model number of your receiver?
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

Apple tv , Bose cinemate series 2, no sound

I just bought a Bose Cinemate series 2 system , bought used from 2009. When I plug the Bose system through the tv box it runs / sounds perfect.
But when I use the apple tv I get no sound. Im using audio cables from the bose reciever , plugging them in audio on my tv ( Lg HD ) it doesnt work.
Does apple tv not support this system?

I have the same problem. Here is my solution to passing Dolby Digital sound through your system (this is, at least, how I chose to solve this problem). You will need 1 HDMI cable and 2 fiber optic cables*
HDMI from Apple TV 2 to your TV monitor
Fiber optic 1 from TV monitor to receiver/preamplifier input (e.g., Video 1, TOS link 1, etc.)
Fiber optic 2 from Apple TV 2 to receiver/preamplifier input (e.g., Video 2, TOS link 2, etc.)
For all connections other than movies that you want to watch in DD 5.1, you can use Fiber Optic 1 as the source selection; the HDMI will pass audio from the Apple TV 2 to your TV monitor, which will pass the audio to your receiver/preamp. For movies that you'd like to hear in DD, use Fiber Optic 2, which is running straight into the receiver/preamp. You will get DD surround (or whatever other format you'd like). Whatever the problem is, this solution works. Set up can vary depending on your system, but make sure you're running a Fiber Optic directly to your amp to circumvent this problem!
*you can use 1 fiber optic if you want, just make sure it's running to your amp and not the TV

How do I connect my Bose Cinemate GS Series ii speakers to Airport Express?

How do I connect my Bose Cinemate GS Series ii speakers to Airport Express?

You can connect the Bose to the AirPort Express with either a digital optical or analog audio cable. For best sound I would recommend the digital connection.
Your Bose speakers should already come with a digital optical audio cable with TOSlink connectors on either end. Either get a 3.5 mm to TOSlink adapter for the end that you will connect to the Express' audio port or get another cable with a 3.5 mm connector on one end and a TOSlink connector on the other. An example could be seen here.

Fiori: incorrect alias used when multiple system aliases assigned

Hello all and Masayuki Sekihara
I'm implementing SAP Fiori PO/PR/Contract approval.
There is only 1 gateway system currently in order to support 4 ECC systems.
(Sandbox, development, quality and production)
Everything is working correctly when assigning only one (Sandbox) SAP system alias to the gateway service of PO approval for example.
However when we assign multiple system aliases and set the sandbox system alias as default things go wrong.
(Currently IW_BEP is not yet installed on the development; Quality and productive system)
And we noticed the service is resulting in an error message because these BEP function modules can not be found on the target system.
However the issue is that it should not call these systems as we have flagged Sandbox system as default.
Anyone has an idea or note for this?
(We temporary fixed this by assigning only a single alias to the services).
But in a later phase we want to add all in order to be able to test on all systems and run production as default.
Thanks for your help.

I don't want to use the MOC.
I want the behaviour like mentioned in the note:
The default system is used whenever the service is not called as MOC. If you have defined more than one default system alias, the first system is used as the default.
How can I achieve this?
According to my understanding now I should make sure ";m"o is not added to the URL, but how can this be achieved?
Thanks!

How can I create manual Y-axis labels in a multiple system report?

A similar question was asked by Lutz1410 on 3/30/07, but it doesn't seem that this was finally resolved. I'll try to ask the question in a different way.
I created a graph in View with 3 axis systems in the "multiple systems" mode, then transferred this to Report. I would like to apply manual scaling and text to each of the 3 axis systems, however if I change either of these parameters they are applied to all 3 Y-axes. In other words, I end up with 3 axes having exactly the same text labels and scaling.
1. For the axis text, is there a delimiter that can be used in the axis text field to tell Report that the first text value is for the first Y-axis, the 2nd value is for the next axis, etc?
2. For the scaling, is it possible to have separate scales for each Y-axis?
Of course, a workaround is to create 3 independent graphs in Report, but this is less convenient.
Thank you,
Craig

Hi Craig,
If you want to apply different manual scaling parameters to each of the stacked Y axes, then you need to use 3 separate Y axes. If you want to display a curve-specific text to each of the stacked graphs, this you can do with a DIAdem expression:
@ChnName(CCN)@@         channel name of each curve
@ChnDim(CCN)@@            channel unit of each curve
@ChnComment(CCN)@@   channel description of each curve
The corresponding value for each curve will automatically display at the correct vertical spot next to its curve.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

What cables do I need to hook up iMac i7 to digital audio receiver.

Just bought a new iMac Quad i7 and expect delivery in two weeks. I would like to hook it up to my audio receiver so I can watch DVDs with full 5.1 Digital Surround. The receiver has optical/digital inputs.
The guys at the Apple store seemed clueless.
Any suggestions?
Thanks.

Hello artandink
You will need a 3.5mm Toslink Adapter or a Toslink cable with a 3.5mm end to plug into the iMac's Audio Output Port.
The Toslink cable from the Apple Store has a 3.5mm Adapter to Toslink included:
http://store.apple.com/us/product/TL955LL/A
The one from OWC already has a 3.5mm on one end for the iMac's:
http://eshop.macsales.com/item/Newer%20Technology/CBLAOPTMT/
Some do not and you'll have to order the 3.5mm Adapter separately:
http://www.optimization-world.com/products/catid/14.html
Dennis

Different manual y-axis in multiple systems

Hallo,
i "ve some problmes to generate a report in Diadem. I have measured values, 600.000 datapoints in 2 channels, current and pressure. The measured values are in a wide range, but i have to lock for the small signal behaviour, so i have to zoom in small x/y areas. The founded points of interest must documented, so i use the function "transfer to report". While i look the data in n-systems i get a report with lines in multiple systems. The problem is the Y-scaling, the scaling is automatically to the whole range of the data, but i want the Y-scalling of the small y area. If i want to rescale manually i found only 1 y-axis, but i see two different y-axis. After rescale manually the scaling is for both axis the same. If i go back to automatically scalling the scaling is different but the same porblem like before, scaling to whole datarange.
How is it possible to have two different manual y-scallings in a multiple systems diagramm with two data-tracks.
best regards
Lutz

Hi Lutz,
I sort of understand what you're talking about, and this sounds like something we should be able to configure correctly in REPORT. I won't fully know what you mean until you send me a data set and the TDR layout file that you're struggling with.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Multiple system maintenance cycles are not shown in pop up for selection

Hi,
In change manager, when we create a change document from a change request, we dont get a pop up for selection of maintenance cycles with multiple systems in it.
The change document is getting created by taking the only available maintenance cycle with only that system.
Is there any configuration for this?
Regards,
Dipti Sawarkar.

Hi Christian,
Thanks for your reply.
I know the pop up will come only when there is more than one maintenance cycles for that production system.
I have done configuration for Normal correction.( SDMJ) and customized it (ZDMJ).
When I try to create a CD* from CR* for a particular production system ( CCP) , it just takes up a maintenance cycle for CCP system and doesnt show up any pop for selection of maint cycles whereas I have created 5 maintenance cycles for this system CCP.
The other 4 maintenance cycles have multiple landscapes (CCP and EAP )in it whereas this one (which gets selected by default) just has CCP landscape in it.
The strange part is that when I try to create a stand alone CD ( without CR ) , it will give that pop up showing all 5 maint cycles. But this is not happening when I create a CD from a CR.
I have never done/ seen configuration for the pop up of selecting maint cycles in ChaRM.
Looking forward to ur help,
( *CD - Change Document and * CR - Change Request)
Regards,
Dipti Sawarkar.

Running JMS Client Programs on Multiple Systems?

Has anyone gotten JMS to work on Multiple Systems
using Windows 2000 on both systems? The JMS Tutorial
doesn't seem to work for me even if I repeat the steps
over an over again (maybe it's incorrect)?
Well, anyway, what I'd really like to do is to run
JMS between different systems using tcp/ip. Is this
possible?

Hey There,
Same thing happens to me. Since your message and others went unanswered, I am being to think this is a dirty little secret.

RAR - SU24 Config Updates - Multiple Systems

I was in the process of updating the SU24 data within RAR and was wondering how GRC differentiates between a transaction that exists in multiple systems. Typically only technical transactions would exist across systems, but this may not always be the case.
I can't say with 100% certainty that a tcd that exists across systems will be maintained with the same SU24 data. Nor can I say that it "ALWAYS" should have the same SU24 data.
When you upload the SU24 data from multiple systems and the same tcd/auth object/auth values exist, will the values be overwritten as you upload the text files for each system? I'm assuming yes? If this is the case, you would have to be cautious to the order in which you upload the text files per system.
We use SRM, BI, PI, and ECC. Any comments would be appreciated.
Thanks,
Rich

yes the text files do not have the SID but when you upload those files in RAR you specify for which system you are uploding it. By selecting the system from drop down you tell GRC for which system the SU24 data is for.
Thank you,
Partha

Script to Rerun Successful Advertisement on Multiple Systems

Hi Guys,
I need to rerun a particular advertisement for a package on multiple computers. I Am able to run it on a single system via the right click tools but how do it do it for multiple systems.
Is there a script for this which could be provided ?
Many Thanks

If you right click on the deployment in the monitoring node and select rerun deployment you will get something like the below from the right click tools by Now Micro
You can then select the group you want and hit Start.
Another option would be to set the deployment properties to Always run the program, but this would make all devices always rerun the deployment.
If you wanted to be able to select specific devices then you will probably need to script yourself something unless someone has already done it.
You could start by looking at Deployment - Rerun Deployment.ps1 that's installed by the right click tools.

ALE-Idoc -Is It possible to distribute Trnsaction data to multiple system ?

Hi Guys,
Is it possible to distribute transactional data to multiple system using ALE?
If yes ,How ?
Will u pls guide me?
Regards

Hello,
This is perfectly possible when you use a distribution model for your message types in BD64.
Per message type you can indicate multiple destination systems in BD64.
Of course you need to maintain all the partner profiles.
More on the SAP help pages:
[http://help.sap.com/saphelp_erp2005/helpdata/EN/0b/2a610f507d11d18ee90000e8366fc2/frameset.htm|http://help.sap.com/saphelp_erp2005/helpdata/EN/0b/2a610f507d11d18ee90000e8366fc2/frameset.htm]
Wim

(RFC vs files), where Sender SAP and receiver multiple system

Publish and Subscribe using BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
This is my 1st BPM scenario in sandbox system
For this scenario
I Created 2 Data types
2 MT,
Service interface:
Request interface Mode:Asynchronous
Abstract Req interface,Mode:Asynchronous
Response Interface,Mode:Asynchronous
Abstract Respomse Interface ,Mode:Aysnchronous
Synchronous Interface ,Mode:Synchronous
2 Message mapping for Req and Resp
1 Operation Mapping
BPM design: Plz find the attatchement
Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
It will be good if anyone send the BPM design flow for this.........
can we do this scenario without BPM?
Regards
A.Muni kumar
Edited by: Muni 1234 on Jan 31, 2012 10:24 AM

Hi
Receiver is FTP only.....
SAP side is RFC.........
RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
Sender: RFC
Receiver: File
1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
if above is the case then you can achive this without BPM also..
Yes...its condition based routing...
I Used async in this scenario.....sender side configurations also done....
But when when I am triggering BAPI from SE37 I am getting an error
Exception SYSTEM_FAILURE
Message ID: 00 Message number: 341
Message:
Runtime error CALL_FUNCTION_NOT_FOUND has occurred
How to Solve this????
I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
Connection is Ok
Or we need to create proxy for MI and report for this?
Edited by: Muni 1234 on Feb 1, 2012 8:38 AM

BAM report from multiple systems...

Hi guys, just wanted to know if we can actually get the data from multiple systems and then generate a BAM report on those data??.Is it possible? and if so then can anyone show me the way.
many thanks,
Rajesh.

One option is create external data sources, though Oracle recommends that you only use these for data that does not change very much (since it does not go through the ADC, instead must be continually polled). http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bam_extl_data_sources.htm#CIHJFDAG
Another option is to create a simple BPEL composite that picks up the data from the various systems and sends it to BAM. In general, BAM is more efficient when data is sent to it, not when it has to get the data. (there are also other options including JMS, etc.)

Multiple Systems hooked to a Bose CineMate digital surround system

Similar Messages

Maybe you are looking for