Multiple takes on the same track, fading from one take to another

Isn't there a way to record multiple takes on the same track and fade the takes together? In an old version of Garage Band, you used to be able to put two takes one on top of the other in the same track and fade them together. Now, the track just cuts and there's no fading to the next one. It's so cheesy this way; all live instruments need two tracks, one for mess-ups. I called up Apple Care but the guy couldn't find a solution. If this is the way it is now, it's very cheap. I mainly bought the Mac because of Garage Band, the Garage Band of old; has it been dumbed down now so that musicians are forced to spend even more money to upgrade to the next level program? I wouldn't have bought the Mac but instead stuck with Mixcraft on PC, which has ease of use and cost only $80. Please say there is a way to fade from one take to the next on the same track without cutting off one take abruptly. Otherwise I have been duped by Apple.

alexafrompassaic wrote:
I believe it was Garage Band '08 that I used with crossfade.
Sorrry dude, didn't happen.
I'm guessing you used Apple Soundtrack - sounds a lot like what you're describing.
Garageband, incidentally, has only added features version to version.
alexafrompassaic wrote:
do you know if Apple would take back my computer?
If you explain to them that you expected software you once used on another computer to be included on this one, how could they not?

Similar Messages

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

How can i transfer the entire itunes program (not the library,but the actual program itself) from one cpu to another? I have the older version that has the slide feature. I can't stand the new itunes.

HOW CAN I TRANSFER THE ITUNES PROGRAM ( NOT THE LIBRARIES,BUT THE ACTUALLY EXE PROGRAM ) FROM ONE CPU TO ANOTHER. I CAN'T
STAND THE NEW ITUNES. I WANT TO TRANSFER MY OLD ONE THAT STILL HAS THE SLIDER FEATURE. THANKS

Sounds like you've already installed iTunes 11 and are now trying to downgrade. To do so successfully you will also need access to a pre-upgrade copy of your library as set out below...
The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
With iTunes 11.0.3 you can enable artwork in the Songs & List views from View > Show View Options (CTRL+J) making it more like the old Album List view.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

Can I transfer the outlook pst file from one mac to another

Can I transfer the outlook pst file from one mac to another?

sure you can
also to a windows pc and import it in a windows outlook

Why the menu to move from one page to another is not seen when the page is online?

On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
why the menu to move from one page to another is not seen when the page is online?
Thank you,
Roger.

Where are you publishing and how are you uploading the files?

How to migrate the concurrent managers definations from one instance to another

How to migrate the concurrent managers definitions from one instance to another instance by using FNDLOAD in R12.1.3
Greatly appreciate any help on this.
Thanks!

Concurrent managers can't be migrated using FNDLOAD -- Tips and Examples Using FNDLOAD (Doc ID 735338.1)
What are you trying to achieve here? Why migrating CMs from one node to another?
Thanks,
Hussein

Adding multiple same-name nodes from one xml into another

Hi,
Following on from my question the other day (Adding multiple different nodes from one xmltype into another), I now have a slightly more complex requirement that I cannot work out where to start, assuming that it's something that can reuse some/all of yesterday's work (thanks again, odie_63!). ETA: I'm on 11.2.0.3
So, here's the (slightly amended) xml along with yesterday's solution:
with sample_data as (select xmltype('<root>
                                       <xmlnode>
                                         <subnode1>val1</subnode1>
                                         <subnode2>val2</subnode2>
                                       </xmlnode>
                                       <xmlnode>
                                         <subnode1>val3</subnode1>
                                         <subnode2>val4</subnode2>
                                       </xmlnode>
                                     </root>') xml_to_update,
                            xmltype('<a>
                                       <b>valb</b>
                                       <c>valc</c>
                                       <d>
                                         <d1>vald1</d1>
                                         <d2>vald2</d2>
                                       </d>
                                       <e>vale</e>
                                       <f>valf</f>
                                       <g>
                                         <g1>valg1</g1>
                                         <g2>valg2</g2>
                                       </g>
                                       <h>
                                         <h1>valh1</h1>
                                         <h2>valh2</h2>
                                       </h>
                                       <multinode>
                                         <name>fred</name>
                                         <type>book</type>
                                         <head>1</head>
                                       </multinode>
                                       <multinode>
                                         <name>bob</name>
                                         <type>car</type>
                                         <head>0</head>
                                       </multinode>
                                     </a>') xml_to_extract_from
                      from   dual)
select xmlserialize(document
           xmlquery(
             'copy $d := $old
              modify (
                insert node element extrainfo {
                  $new/a/b
                , $new/a/d
                , $new/a/f
                , $new/a/h
                } as first into $d/root
              return $d'
             passing sd.xml_to_update as "old"
                   , sd.xml_to_extract_from as "new"
             returning content
         indent
from sample_data sd;
That gives me:
<root>
<extrainfo>
    <b>valb</b>
    <d>
      <d1>vald1</d1>
      <d2>vald2</d2>
    </d>
    <f>valf</f>
    <h>
      <h1>valh1</h1>
      <h2>valh2</h2>
    </h>
</extrainfo>
<xmlnode>
    <subnode1>val1</subnode1>
    <subnode2>val2</subnode2>
</xmlnode>
<xmlnode>
    <subnode1>val3</subnode1>
    <subnode2>val4</subnode2>
</xmlnode>
</root>
However, I now need to add in a set of new nodes based on information from the <multinode> nodes, something like:
<root>
<extrainfo>
    <b>valb</b>
    <d>
      <d1>vald1</d1>
      <d2>vald2</d2>
    </d>
    <f>valf</f>
    <h>
      <h1>valh1</h1>
      <h2>valh2</h2>
    </h>
    <newnode>
      <name>fred</name>
      <type>book</type>
    </newnode>
    <newnode>
      <name>bob</name>
      <type>car</type>
    </newnode>
</extrainfo>
<xmlnode>
    <subnode1>val1</subnode1>
    <subnode2>val2</subnode2>
    <type>book</type>
</xmlnode>
<xmlnode>
    <subnode1>val3</subnode1>
    <subnode2>val4</subnode2>
    <type>car</type>
</xmlnode>
</root>
If it's easier, I *think* we would be ok with something like:
<newnode>
<type name="fred">book</type>
<type name="bob">car</type>
</newnode>
The closest I've come is:
with sample_data as (select xmltype('<root>
                                       <xmlnode>
                                         <subnode1>val1</subnode1>
                                         <subnode2>val2</subnode2>
                                       </xmlnode>
                                       <xmlnode>
                                         <subnode1>val3</subnode1>
                                         <subnode2>val4</subnode2>
                                       </xmlnode>
                                     </root>') xml_to_update,
                            xmltype('<a>
                                       <b>valb</b>
                                       <c>valc</c>
                                       <d>
                                         <d1>vald1</d1>
                                         <d2>vald2</d2>
                                       </d>
                                       <e>vale</e>
                                       <f>valf</f>
                                       <g>
                                         <g1>valg1</g1>
                                         <g2>valg2</g2>
                                       </g>
                                       <h>
                                         <h1>valh1</h1>
                                         <h2>valh2</h2>
                                       </h>
                                       <multinode>
                                         <name>fred</name>
                                         <type>book</type>
                                         <head>1</head>
                                       </multinode>
                                       <multinode>
                                         <name>bob</name>
                                         <type>car</type>
                                         <head>0</head>
                                       </multinode>
                                     </a>') xml_to_extract_from
                      from   dual)
select xmlserialize(document
           xmlquery(
             'copy $d := $old
              modify (
                insert node element extrainfo {
                  $new/a/b
                , $new/a/d
                , $new/a/f
                , $new/a/h
                , element newnode {
                                   $new/a/multinode/name
                                   ,$new/a/multinode/type
                } as first into $d/root
              return $d'
             passing sd.xml_to_update as "old"
                   , sd.xml_to_extract_from as "new"
             returning content
         indent
         ) fred
from sample_data sd;
Which produces:
<newnode>
<name>fred</name>
<name>bob</name>
<type>book</type>
<type>car</type>
</newnode>
- obviously not right!
Can anyone provide any hints? I've tried searching for similar examples, but I mustn't be putting in the right search terms or something!

odie_63 wrote:
or, similarly, to get the alternate output :
copy $d := $old
modify (
insert node element extrainfo {
    $new/a/b
, $new/a/d
, $new/a/f
, $new/a/h
, element newnode {
      for $i in $new/a/multinode
      return element type {
        attribute name {data($i/name)}
      , data($i/type)
} as first into $d/root
return $d
So we're going with the second method, but I've discovered that the "$i/name" node is not always present. When that happens, I would like to use a default value (for example, "george"). I promise I've searched and searched, but I'm completely failing to turn up anything that sounds remotely like what I'm after (seriously, I can't believe my google-fu sucks this badly!).
Is there a simple way of doing it? The only thing that I've found that looks vaguely relevant is "declare default namespace...." but I'm not sure that that's the correct thing to use, or if it is, how I'm supposed to reference it when populating the attribute value.

How to move the pages and reports from one dashboard to another

hi all
can please any one tel me hw to copy the reports along with pages from one dashboard to another
Thanks

Hi,
Go to Administrator->Manage Presentation Catalg->Click on Group folder under which the dashboard and reports are present
1)Create one folder and copy the reports which are present in the dashboard pages you want(reports will be under some specific folder,open and copy one after the other to the newly created folder).Do this if you want other set of same reports for new dashboard that you are creating
2)Click on _portal and create a new folder(new dashboard)
3)Click on dashboad that is to be copied
4)copy the pages one after the other into new dashboard folder
If you are not keeping new set of reports then no need to point reports in pages,if reports are placed under new folder then go to each page and pull those reports from newly created folder.
Regards,
Srikanth

I have 2 screen and the dock is changing from one screen to another , can I stop it (Mac OS 10.9.1)

Hello , I have 2 screens , and the dock is moving from one to the other screen at any time .
I would like to "paste" it on one screen
How should I do?
Thanks for your help

Hello there, BHDock.
The following Knowledge Base article explains how the Dock works in Mavericks:
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Working with the Dock
When the Dock is configured to appear at the bottom of your screen, it's available on whichever screen you’re working on. Just move your pointer to the bottom of either display. When the Dock is configured for the left or right position, it appears on the leftmost or rightmost display edge.
The Dock settings are located in System Preferences.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How do I move all the apps and podcasts from one mac to another mac?

What is the best way to move all the apps and iTunes content (songs, podcasts, etc) from one Mac to another Mac? I am switching to a newer computer. I connect (with cables) an iPhone 4 and an iPad 2 to the old computer for syncing.

Take a look at this.
iTunes: How to move your music to a new computer
When I recently got a new MacBook, I set it up with Times Machine using a backup of the old computer. It could not have been easier. If you use Time Machine - that will copy the contents of the old Mac to the new Mac - iTunes library included. You will have to authorize the new Mac in iTunes - Store>Authorize this computer.
There are ways of copying the purchased contents from the iPad to the new iTunes library as well if you need to do that. But as long as you have the old Mac - copying the library and putting it on the new Mac makes the most sense.

Can multiple accounts use the same purchased apps from the same computer?

Hope one of you guys can help me out!
Ive got an iTunes account with over 1300 app store apps, most of which are paid, my kids have just got an iPhone4 and an iPod Touch4 for xmas presents and Im currently setting them up for them to use straight away on xmas day.
The issue is;
For them to be able to use all my apps on their devices Ive had to use my account, this causes issues with things like GameCentre and FaceTime, because we are all on the same e-mail address and account!!!
Is there any way for me to set up there own accounts in such a way as they can still have access to my apps?????
Please help if you can, it would be greatly appreciated,
Thanks, James

Akhilleus70 wrote:
How do I authorise them all to use the same apps etc?
that's basically very easy. all you have to do is +log out+ of one account (click on the account name in the Store window and select +sign out+ from the pop-up dialog) and into the other, and then they will both be authorized.
JGG

How do I add multiple tickets under the same confirmation number from the American Airlines app to Passbook?

I have a confirmation number from American Airlines for a flight with my family all under my name and for some reason I cannot add all of our tickets to Passbook. To clarify, I went to the American Airlines app and put in the confirmation number along with my name which pulled up my boarding pass only. Although I was able to add this boarding pass to Passbook, I was not able to add any of the other boarding passes for my children to Passbook that should have also been under the flight reservation. In fact I couldn't even see them in the American Airlines app. I tried to use their names and the same confirmation number but nothing happened, and nothing else seems to be working. How can I add all of these boarding passes to my Passbook?

Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys.

How do I delay a picture change in Keynote beyond the 60seconds the build process allows from one graphic to another on the same slide?

How do I delay a picture change in Keynote beyond the 60 seconds allowed in the 'build' it procedure on the same slide?

BazzyS wrote:
I'm referring to a graphic change within the same slide not transition between slides.
In the suggestion I gave, using a transition instead of a build, has exactly the same visual effect as a build, it just uses a different tool.
in my example earlier, I have 7 coloured objects, the first 6 objects appear using a dissolve build.
The 8th object appears with the same effect, a dissolve, but is delayed by 5 minutes because it uses a dissolve transition.
I used a transition instead of a build which uses 2 slides to achieve the effect, the viewers will not care how many slides there are and what tool is used, its the end result that matters.
first 7 objects appear in a build
a transition set up using a disolve and a delay of 10 minutes
7th object appears with a disolve

How to pass the check box values from one view to another view

Hi Experts,
I have a selection screen view which consists of check boxes.
WBS System status.
Release                      Completed                  Closed as 3 check boxes.
Note : The above ones are check boxes.
Based on the selection made by the user, those values needs to be passed to second view which retrieves the data and
displays the data accordingly.
At the same time if the user does not make any selection, then WBS System status should contain Released, Completed and Closed values and that needs to be sent to Second view.
Kindly advise.
Regards,
Chitrasen

hi ,
make a attribute of type WDY_BOOLEAN to achieve this functionality
u need to follow these steps :
1 in side ur component controller , under the ATTRIBUTES tab , make 3 attributes say attr1 , attr2 and attr3 of type WDY_BOOLEAN
2 create a context node , cn_check and 3 context attribute ca_check1 , ca_check2 and ca_check3 in ur first view for
release , complete and close check boxes
3 inside the DOINIT of ur 1st view , set the attributes attr1 , attr2 and attr3 to blank
wd_comp_controller->attr1 = ' '
wd_comp_controller->attr2 = ' '
wd_comp_controller->attr3 = ' '
4 inside the method , where u r validating , if the check boxes are checked or not , read the attributes ca_check1 , ca_check2 and
ca_check3
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
    DATA ls_cn_check TYPE wd_this->element_cn_check.
    DATA lv_ca_check1 LIKE ls_cn_check-ca_check1.
*   navigate from <CONTEXT> to <CN_CHECK> via lead selection
    lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
*   get element via lead selection
    lo_el_cn_check = lo_nd_cn_check->get_element( ).
*   get single attribute
    lo_el_cn_check->get_attribute(
      EXPORTING
        name = `CA_CHECK`
      IMPORTING
        value = lv_ca_check1 ).
IF lv_ca_check1 EQ 'X' .
wd_comp_controller->attr1 = ' X'
wd_comp_controller->attr2 = 'X '
wd_comp_controller->attr3 = ' X'

Multiple takes on the same track, fading from one take to another

Similar Messages

Maybe you are looking for