Multiple Target Files as the number of times Item in source node
Hi all
I am new XI ,my scenario is File to File and my data type structures for source and target are as follows
Data type for source
Source
Header 1:unbound
Org 1:unbound
In declaration of target data type occurrence of all child nodes are 1:unbounded. And I have used it in Message type and in message mapping for my target message type occurrence is showing as 1:1.
My objective is to replicate this entire Target as the no of times the Item is occurring in source ie for multiple items in source I want multiple target files. For this I have mapped item node of source to Target(parent node). But in mapping test it is only displaying one Target structure for multiple nodes in source. Please Help me in solving this issue
Hi Satish,
Use Multi Mappings :
When you create message mapping change the occurence of target from 1 to unbounded. This will allow you to create multiple target structures.
Then map them accordingly as per your need and you can see multiple output in test.
Just you have to be more focused on the context and for that you have to go thro' the mapping documents.
Search related documents on SDN and go thro' them.
Regards,
Shri
Similar Messages
-
Multiple Target files as the item in source file
Hi all ,
I am new XI ,my scenario is File to File and my data type structures for source and target are as follows
_Data type for source: _
Source
Header 1:unbound
org 1:unbound
order 1:unbound
Item 1:unbound
itemno 1:unbound
matno 1:unbound
Data type for Target
Target
org 1:unbound
order 1:unbound
itemno 1:unbound
matno 1:unbound
In declaration of target data type occurrence of all child nodes are 1:unbounded. And I have used it in Message type and in message mapping for my target message type occurrence is showing as 1:1.
My objective is to replicate this entire Target as the no of times the Item is occurring in source ie for multiple items in source I want multiple target files. For this I have mapped item node of source to Target(parent node). But in mapping test it is only displaying one Target structure for multiple nodes in source. Please Help me in solving this issue .
Full Points will be awarded
Thanks & Regards
Satish.Hi,
If you want multiple Targerts you need to use UseOneAsMany.
check below link
http://help.sap.com/saphelp_nw70/helpdata/en/38/85b142fa26c811e10000000a1550b0/content.htm
Thanks,
RamuV -
Generate numbers in incremental order, the number of times condition met?
I have tried explaining my problem here also.
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=31&t=007531&p=1
But trying to put in other words now.
I have a NO tag which appears many times in xml. and alwyas have some random numbers displaying.
output looks something similar to this
something......<NO>1</NO>
something......<NO>1</NO>
something......<NO>2</NO>
something......<NO>1</NO>
something......<NO>3</NO>
something......<NO>1</NO>
something......<NO>5</NO>
something......<NO>1</NO>
something......<NO>1</NO>
something...... & so on.
Now instead of these numbers coming in this order i prefer to display in final output file as
1 2 3 4 5 .................... n
Is it possible in any ways using xslt.
DO we need to ignore the values given in input file and then generate output values for same.
it can be like the number of times NO tag appears in xml, it should start from 1 and keep increasing value by 1, until NO tag finishes appearance.
But next time when other xml transforms it again should be able to start from 1 till n.
is there a possibility of using java code for this situation or xslt is capaable enough to handle this.
Thanks
VJI'm guessing you are looking for something like this. I used a pull approach but it could be done with a push (xsl:for-each).
Sample XML
<?xml version="1.0" encoding="UTF-8"?>
<root>
<NO>1</NO>
<NO>1</NO>
<NO>2</NO>
<NO>1</NO>
<NO>3</NO>
<NO>1</NO>
<NO>5</NO>
<NO>1</NO>
<NO>1</NO>
</root>
Sample XSLT
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" omit-xml-declaration="yes" encoding="UTF-8" indent="yes"/>
<xsl:template match="root">
<output>
<xsl:apply-templates select="NO"/>
</output>
</xsl:template>
<xsl:template match="NO">
<row>
<xsl:value-of select="position()"/>
</row>
</xsl:template>
</xsl:stylesheet>
Sample Output
<output>
<row>1</row>
<row>2</row>
<row>3</row>
<row>4</row>
<row>5</row>
<row>6</row>
<row>7</row>
<row>8</row>
<row>9</row>
</output> -
Is there a way to count the number of times an array moves from positive to negative?
I have an array of values, and I need to find the number of times that the array changes signs (from positive to negative, or vice versa). In other words from a graphical standpoint, how many times a certain line crosses the x-axis. Counting the number of times the array equals zero does not help however, because the array does not always equal exactly zero when it crosses the axis (ie, the points could move from .1 to -.1).
Thanks for you help. Feel free to email me at [email protected] I only have lv 5.1.1 so if you attach any files, they cannot be version 6.0.Attached is a VI showing the # of Pos and Neg numbers in an array, with 0 considered as non-Pos. It is easily modifiable to other parameters - including using the X-axis value as your compare point versus only Zero.
This is a modified VI from LV (Separate Array.vi)
Compare this with your other responses to find the best fit.
Doug
Attachments:
arraysizesposneg.vi 40 KB -
Is there any way to limit the number of times that a PDF can be opened?
I run a small publishing company and we want to provide exam copies of our books to professors. At present our exam copies have the words EXAM COPY as a water mark on every page and we've also made the files so that they can't be printed or easily copied. However, we'd like to also restrict these PDFs so that they can only be opened 5 times. I've read about FileOpen but that approach seems a bit more complex than needed. Is there any other way to restrict the number of times that a PDF file can be opened once it is downloaded? Thanks in advance for any suggestions.
DRM soltions like FileOpen are your best bet for PDFs. Others include Adobe's LiveCycle Rights Managment, LockLizard, Armjisoft PDF Security OwnerGuard, etc.
They all work and are priced differently, but there's really nothing for what you want to do that is both simpler and secure. -
I mainly just use my iTunes for organizing and adding new songs. Most of the time I listen to my music on my iPhone. I wish it would keep track of how many times I play a song in my music and transfer it to the computer under the 'number of times played' column. It would help out so much! Does anyone know if there is a way for the number of time a song has been played on your iPhone/iPod be transferred to the songs on your iTunes number of plays?
Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
How to find the number of times method being called.....
hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes. -
How to calculate the number of times an user has accesed a BEx report
Hi Experts,
We have number of reports in our BW portal and users logon to the portal and run the reports.
How do we count the number of times each user has logged in and ran each report.
Kindly advice.
Thanks,
SaiHi Sai:
I think you can use BI statistics information, which could provide you more detail information.
You can follow the document
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards,
Louis Lu -
How do i count the number of times a cell has been referenced by other cells' formulae?
Hello,
I have a spreadsheet of recipes and ingredients that use checkboxes to let me know which recipes I can make based on the ingredients I have on-hand, using a formula like this one: =IF(AND('Spirits' :: A42,Mixers :: A18,Mixers :: A41,'Spirits' :: A25 ),Table 3 :: $A$2,Table 3 :: $A$3). If I've checked all of the boxes for ingredients that are required for any one of my recipes, the cell that the formula is in returns something like "YES"; otherwise, it returns a blank. It works well enough, but I'd like to include a cell next to each ingredient with a formula that will look through the hundreds of recipes, which all use a formula like the one above, and return a count of the number of times the ingredient's cell is referenced in those formulas. That way, I'll know which ingredients are the most commonly used in my eclectic collection of recipes. I thought something like =COUNTIF('Recipes' :: A2:A343, "=A2") would work, but it doesn't look at the cell references in the formulas, so no, it doesn't work. Any ideas? I'm using Numbers 2.3Hello
There's no formula to inspect other formula in Numbers. So what you asked cannot be achived in such a way you described.
A simple alternative method would be to build recipe-ingredient matrix as follows.
E.g.
Table definitions:
Recipes
A1 Recipe \ Ingredient
A2 A
A3 B
A4 C
A5 D
A6 E
A7 F
A8 # recipes / ingredient
B1 X1
B2 TRUE
B3 FALSE
B4 TRUE
B5 FALSE
B6 TRUE
B7 FALSE
B8 =COUNTIF(B,TRUE)
C1 X2
C2 TRUE
C3 TRUE
C4 FALSE
C5 TRUE
C6 TRUE
C7 TRUE
C8 =COUNTIF(C,TRUE)
D1 X3
D2 FALSE
D3 TRUE
D4 FALSE
D5 TRUE
D6 FALSE
D7 TRUE
D8 =COUNTIF(D,TRUE)
E1 X4
E2 FALSE
E3 FALSE
E4 FALSE
E5 FALSE
E6 FALSE
E7 TRUE
E8 =COUNTIF(E,TRUE)
F1 Y1
F2 TRUE
F3 FALSE
F4 TRUE
F5 TRUE
F6 TRUE
F7 FALSE
F8 =COUNTIF(F,TRUE)
G1 Y2
G2 FALSE
G3 TRUE
G4 TRUE
G5 FALSE
G6 FALSE
G7 TRUE
G8 =COUNTIF(G,TRUE)
H1 Y3
H2 TRUE
H3 TRUE
H4 FALSE
H5 TRUE
H6 TRUE
H7 FALSE
H8 =COUNTIF(H,TRUE)
I1 Y4
I2 FALSE
I3 FALSE
I4 FALSE
I5 FALSE
I6 FALSE
I7 TRUE
I8 =COUNTIF(I,TRUE)
J1 in-stock?
J2 =SUMIF(B2:E2,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F2:I2,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B2:I2,TRUE)
J3 =SUMIF(B3:E3,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F3:I3,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B3:I3,TRUE)
J4 =SUMIF(B4:E4,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F4:I4,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B4:I4,TRUE)
J5 =SUMIF(B5:E5,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F5:I5,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B5:I5,TRUE)
J6 =SUMIF(B6:E6,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F6:I6,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B6:I6,TRUE)
J7 =SUMIF(B7:E7,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F7:I7,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B7:I7,TRUE)
J8
X
A1 Ingredient
A2 X1
A3 X2
A4 X3
A5 X4
B1 in-stock?
B2 TRUE
B3 TRUE
B4 TRUE
B5 FALSE
C1 code
C2 =IF(B2,1,0)
C3 =IF(B3,1,0)
C4 =IF(B4,1,0)
C5 =IF(B5,1,0)
Y
A1 Ingredient
A2 Y1
A3 Y2
A4 Y3
A5 Y4
B1 in-stock?
B2 TRUE
B3 FALSE
B4 TRUE
B5 FALSE
C1 code
C2 =IF(B2,1,0)
C3 =IF(B3,1,0)
C4 =IF(B4,1,0)
C5 =IF(B5,1,0)
In "Recipe" table, the first row is header row and the last row is footer row.
Hope this may help,
H -
Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha -
How do I count the number of times a word appears in a column?
What I have is a spreadsheet logging work history. Let's say the work location is "office", "home", or "travel" and I want to have a separate cell in another table for totals, count up the number of time each appears in the data for the year. So it would look like this:
Date
Location
sept 1
office
sept 2
home
sept 3
home
sept 4
travel
sept 5
office
sept 6
office
sept 7
office
sept 8
travel
sept 9
home
sept 10
office
Totals
Days
10
Office
5
Home
3
Travel
2
I just can't figure out how to develop the formula to put in the Totals column to make it work this way. If you can help me achieve this I'd really appreciate it!Hi SpartanAntarctican,
Table 1 to record your locations
Date
Location
sept 1
office
sept 2
home
sept 3
home
sept 4
travel
sept 5
office
sept 6
office
sept 7
office
sept 8
travel
sept 9
home
sept 10
office
Table 2 to sum your locations
Totals
Days
10
Office
5
Home
3
Travel
2
In Table 2 the formula in B2
=ROWS(Table 1::A)−1
Minus 1 because there is a Header Row in Table 1.
In Table 2 the formula in B3 (and Fill Down)
=COUNTIF(Table 1::B,A3)
You can check this by adding 5 + 3 + 2 to arrive at 10
Or maybe delete Row 2 put the Days calculation into a Footer Row in Table 2
=SUM(B) .
Regards,
Ian. -
How Do I Assess The Number Of Times A Page Has Been Hit?
Can anyone identify the schema, table and field that when queried identify the number of times an individual page has been accessed?
I want to create a 'hit counter'. Ideally the field would identify all accesses, not by IP address or username or any other denominator.portal30.wwlog_activity_logs
Portal logs activity in two tables wwlog_activity_log1 and wwlog_activity_log2. It toggles between these two tables every week by default. The wwlog_activity_logs is a view connecting both of these tables.
Be prepared to do some homework to figure out how to identify the actual page(s) you want to log. It's not clear cut and also be aware that you can't get down to the actual tab pressed within a page without some custom coding... and also, portal purges logged data every two weeks by default. -
Calculate the number of times a character appears in a string
Please help.
Is there a way to count a number of occurences of a particular character in a string? e.g. If you have 'DATABASE' as a string, can you calculate the number of times 'A' occurs in it? The answer is supposed to be 3, but can you calculate it in Oracle?
Thanks in advance.Re: Any built-ins for occurance
-
How can I increase the number of times my 4s rings before it goes 2 msg bank?
My iphone 4s only rings 3 times before it goes to msg bank. How Can I increase the number of times it rings?
This is controlled by your carrier, so contact them,
-
How can I increase the number of times I am notified that I have a text or voicemail .
How can I increase the number of times I am notified that I have text or voicemail waiting to be read?.
DPickRN,
Making sure you don't miss any messages is very important and we would be happy to go over your options today. Are you using the Visual voicemail or do you call *86 to access your voicemails?
CandiceH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
Maybe you are looking for
-
How do i make this page adapt to all screen sizes???
if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes?? <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-
What are the MAJOR Differences between C++ and Java?
What is it?
-
Can i use my fingerprint to provide admin credentials?
i have a secondary user account that i use for daily operations on my x220 that is a standard account without admin access. this means that whenever i want to insall anything i have to enter in the admin password. is it possible to use the fingerprin
-
Vertical blue line won't go away ANYONE ELSE HAVE THIS ?
I have a vertical blue line on my MBP display, only one pixel thick but all the way top to bottom. Location-wise, in the finder menu the line runs between the 'e' and 'l' of the 'help' option - about 4" from the left of the screen. The problem persis
-
I've been having computer trouble, now it won't start up except in rescue in recovery mode. When I try to rescue files to my extrenal harddrive, it will work for the first few files, but then will give a message "Data Error (Cyclic Redundancy Check)"