Multiple target images for disjoint rollovers

I have one large image on the left that serves as the target
(area?) and 4 smaller images on the right that should serve as four
separate triggers. When moused over, each trigger should cause a
separate image to appear in the trigger area.
I've been successful using Fireworks to make that happen for
one trigger but can' only get on trigger/target to happen.
Can someone help me with this.

> Can someone help me with this.
Don't do this in FW. The HTML that FW writes is really only
suitable for
proptyping. For production work, do such things in DW.
There is a good disjoint tutorial here -
http://www.dwfaq.com/tutorials/basics/disjointed.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"c15202" <[email protected]> wrote in
message
news:g6v1pc$n4j$[email protected]..
>I have one large image on the left that serves as the
target (area?) and 4
> smaller images on the right that should serve as four
separate triggers.
> When
> moused over, each trigger should cause a separate image
to appear in the
> trigger area.
>
> I've been successful using Fireworks to make that happen
for one trigger
> but
> can' only get on trigger/target to happen.
>
> Can someone help me with this.
>

Similar Messages

Adobe Premiere Elements 7 - Selecting Multiple Still Images for Time Stretch

Hi,
I have Adobe Premiere Elemetns 7. I would like to be able to select multiple still images on the timeline so that I can timestretch them all at the same time.
I understand that you can do this when you drag the photos over to the sceneline, then get the dialog box that asks for the time duration or transition duration. I would like to do this after they have been placed on the timeline though.
I would like to put say an hour of music on the music line, then drag over say 400 photos, then timestretch the photos such that thier time matches the music timeline. Smartsound does not seem to find the music on my computer to do this, I would like to use my own music.
Any help would be appreciated, thanks.

Tonight why don't you download the free 30 tryout of Premiere Elements 8, check out the feature of interest in particular, and determine if it is worth it. Check out it's stability in your computer environment. You do not have to uninstall Premiere Elements 7. When you install Premiere Elements 8, the installation process detects prior versions and tells you that you do not have to uninstall them, just use one at a time.
Depending on how things go, get on the phone to Adobe Customer Service Monday morning and be pleasant but determined, express your need for the new feature(s), and request an exchange, the new for the old. As a last resort, request your money back for version 7.
Please update us on your progress. But, in the back of your mind, keep the old thought of "be careful what you wish for". You may win one with the duration feature but lose some ground with stability and other features.
ATR

Setting multiple album images for a group.

I want to put multiple images for CDs that I have (Front, back, inside of booklet, etc). Can I do this for an entire CD or do I need to do each song separately?

You can add multiple album artwork images to multiple tracks at the same time, but not through the Multiple Song Get Info pane. Each time you drag an image onto the Artwork box in this pane, the previous image is erased.
To add multiple images, select your tracks in the main iTunes Window, and make sure that Artwork box under the Source Menu is visible. Then just drag the image you want to add to the tracks onto this pane, but make sure you FIRST add the image you want to appear FIRST. There isn't any way to reorder the images in a group of tracks - that has to be done in the individual track's artwork pane (Get Info>>Artwork tab).
Lita

WDS Multiple x64 Images for Windows 7 & 8.1

Hi all,
I wanted to know, what would be the best way to setup my WDS so that I can incorporate both windows 7 & 8.1 x64 boot and capture images.
The reason I ask this, is because I added the Windows 8.1 boot image, created a capture image and then after sysprep'ing a machine with windows 8.1 64 bit, I tried to capture it but ended up with the 0xc000000f error which has knocked out all of my
capture images.
I've only just attempted the dism mount & dismount method to see if it has fixed it, but I would appreciate if anyone knows an error free method so that I can have both windows 7 & 8.1 capture images to work together.
Thanks,
Hasan

Hi Hasan,
You can use the following similar thread solution to fix this issue.
Image Capture Boot Image Fails with 0xc000000f
https://social.technet.microsoft.com/Forums/windowsserver/en-US/a164b948-1778-42bd-8d77-9cef1ca70866/image-capture-boot-image-fails-with-0xc000000f?forum=winserversetup
If your WDS server are integrate with DFS please confirm the DFS has sync complete then to start deploy.
More information:
0xc000000f after reboot
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/0xc000000f-after-reboot/5da88257-837d-4475-ad6e-9ea8968826f4
MDT 2012: File: \boot\BCD Status: 0xc000000f error
https://social.technet.microsoft.com/Forums/en-US/e8d30795-bda8-4162-80bb-2af6b90f1365/mdt-2012-file-bootbcd-status-0xc000000f-error?forum=mdt
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

MULTIPLE place image import...& "save as.." multiple layers to multipage PDF

Hello,
just some suggestions I`d like to see to speed up my set up and output..
i`d like to import multiple placed images into illustrator CS4. So open dialogue box place, and multiple select images for placing.
regards output save as...
Can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each layer... would be a huge time saver for me.I create different artworks on different layers..
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..i`d like to do this right in the illustrator "save for PDF" dialogue box. Adding something in the Save for PDF output dialogue box to save layers to one PDF as multiple pages would be a helpful time saver..
I`d also like to be able to CTRL click multiple layers and go " save as..." only those layers get saved out...

, bridge -FILE/PLACE into ai, goes to separate layers in AI as placed.
in PS, bridge/tools/ps/load files into ps layers.. CS4.
just using right click in explorer on individual PDF docs from layers saved from PS to combine to PDF. but cannot output multiple pds from layers in AI in CS4.

Multiple CSS image rollovers on a page

Hi there,
So, I have miraculously managed to create my first ever CSS image rollover navigation button on my webpage. This page is an online art gallery so there will be several small image rollover buttons linking to different pages of art.
My question is now that I've created one CSS rollover, do I have to create a brand new one for each additional button or is there a way to change the image and name of the existing button?
Here is my CSS and HTML for the existing image rollover:
/** Declaration for the a.singleRollover selector **/
a.singleRollover {
    display: block;
    width: 90px;
    height: 90px;
    overflow: hidden;
    text-indent: 0px;
    font-size: 0px;
    line-height: 0px;
    background-image: url(../Images/CSS%20Rollover/ButtonTOBI.jpg);
    background-repeat: no-repeat;
    background-position: 0 0;
/** Declaration for the additional states of the a.singleRollover selector **/
a:hover.singleRollover {
    background-position: 0 -90px;
    background-image: url(../Images/CSS%20Rollover/ButtonTOBI.jpg);
<div id="smallBox01a"><a class="singleRollover" title="Tobi rollover" href="Images/CSS Rollover/ButtonTOBI.jpg"></a></div>
The problem is that the background image is already set as ButtonTOBI. Is there a way to specify the image in the HTML each time individually rather than in the main a.singleRollover item? It seems very repetitive to have to go in and create lots of individual CSS rollover buttons.
Thanks in advance for any help.

Go here -
http://www.alistapart.com/articles/sprites
http://www.tjkdesign.com/articles/how-to_use_sprites_with_my_Image_Replacement_technique.a sp
Read about how to use a single image for all of your menu 'rollovers'. It works great!

Unable to select multiple images for upload

I have Windows 7 Pro and FF 9.0
I have an online store and am always uploading product photos for items I have listed. I recently switched from XP Pro to Windows 7 Pro. I had no issues with XP. However, now that I have Windows 7 Pro I am unable to select multiple images for upload when using FF. I can only select one image at a time.
The issue is unique to FF. I have tried in several other browsers, and FF is the only one that I am unable to select multiple images from.
I had FF 8.0.1 and upgraded to 9.0... hoping that would resolve the issue. It did not. I have restarted my computer several times which has also had no effect.

Hi,
Welcome to the  Discussions
I see it is about 6 hours since you posted, so I guess you will get this when you wake. (I'll be sleeping then)
This would be better asked in the forum for Using Leopard inside the Leopard Category sating which browser and which site it was.
(it probably made lots of sense to you when you were typing it but it seems a little short in facts or workable info.)
8:43 PM Wednesday; March 24, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

1 Success Caption for Multiple Targets in a Drag and Drop Interaction

I see how I can add success captions to each target in a drag and drop interaction, but can you apply only 1 success caption multiple targets?

The boundaries of smartshapes were overlapping with each other. For example, the smartshape on 1st line was overlapping with the one on 2nd line. Due to this, every time you place the text caption "Investment" on the smartshape on 2nd line, it automatically moved to the smartshape on 1st line. As a result, you could never get the answer right, and hence you never saw the Success Caption.
Solution: Move the smartshapes away from each other (or resize them), and ensure that there are no overlaps.
2, The number of attempts for this interaction was set to Infinite. So, you have to play this until you get it right, but you could not get it right because of the reasons mention above. That is why you never saw the Failure Caption.
Solution: Clear the Infinite check box in the Action accordion and specify the required number of attempts. You will get the Failure Caption if you don't get it right in those attempts.
I just tested these solutions and they worked fine. Let me know if you still face any issues.

Building an image for multiple types of Macs...

I need to build images for iMac G3 500's, iMac G4's, eMacs, & 400 Mhz G4 Towers. My question is this...
Using OS 10.3 or 10.4, can I build an image on one of these machines that will have all of the appropriate drivers, software, etc. to distribute to all of them? Or... are there specific items installed during the OS install for some machines and not others?

Contradictory evidence exists whether or not you can really build one unique image for use for all of those machines. One interesting factor here is you say 10.3 or 10.4. Those operating systems can not really be run from one image simultaneously.
In addition, some G4 400 Mhz towers are incapable of target disk mode or being used as the source for a migration assistant transfer. These two articles tell you which those are:
http://docs.info.apple.com/article.html?artnum=58583
http://docs.info.apple.com/article.html?artnum=58418
Assuming you have license for Mac OS X for all the machines there, I suggest building a by model base of a partition you can import to each machine from several external hard drives.
The migration assistant after installing Mac OS X on a specific machine can help simplify how many partitions you need to create:
http://docs.info.apple.com/article.html?artnum=25773
You just install the operating system and it will import data using the migration assistant.
Now the migration assistant will import data from a 10.3 machine to a 10.4 machine, but you can't do vice versa.

Setting multiple targets for AppDeployments or Libraries in wlst off-line

I am currently struggling to add targets/change to Apps and libraries in wlst offline mode. Setting one target is succesfull, but every way i can think of setting multiple targets does fail.
If someone has a good hint.....
What i tried (with errors and outcomes) ;
readDomain('/u01/app/oracle/user_projects/domains/bip_domain')
cd('/AppDeployment/wsm-pm')
et=get('Target')
print etarray(weblogic.management.configuration.TargetMBean,[Proxy for bi_cluster: Name=bi_cluster, Type=Cluster, Proxy for AdminServer: Name=AdminServer, Type=Server])
set('Target',et)Error: set() failed. Do dumpStack() to see details.
dumpStack()com.oracle.cie.domain.script.jython.WLSTException: java.lang.IllegalArgumentException: Param type [Lweblogic.management.configuration.TargetMBean; not supported
Caused by: java.lang.IllegalArgumentException: Param type [Lweblogic.management.configuration.TargetMBean; not supported
        at com.oracle.cie.domain.script.jython.WLScriptContext.set(WLScriptContext.java:1296)
s
cmo.setTargets(et)>cd('/Clusters/bi_cluster')>tcl=cmo>cd('/AppDeployment/wsm-pm')>newTargets=array([,Class.forName('weblogic.management.configuration.TargetMBean'))newTargets.append(tcl)
print newTargets
array(weblogic.management.configuration.TargetMBean,[Proxy for bi_cluster: Name=bi_cluster, Type=Cluster])
set('Target',newTargets)Error: set() failed. Do dumpStack() to see details.
dumpStack()com.oracle.cie.domain.script.jython.WLSTException: java.lang.IllegalArgumentException: Param type [Lweblogic.management.configuration.TargetMBean; not supported
Caused by: java.lang.IllegalArgumentException: Param type [Lweblogic.management.configuration.TargetMBean; not supported
set('Target','bi_cluster')>print get('Target')array(weblogic.management.configuration.TargetMBean,[Proxy for bi_cluster: Name=bi_cluster, Type=Cluster)set('Target','bi_cluster,AdminServer')
print get('Target')
Error: getTargets() failed. Do dumpStack() to see details.
dumpStack()com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: com.oracle.cie.domain.script.ScriptException: No JMSServer object with name AdminServer
set('Target','AdminServer')
print get('Target')array(weblogic.management.configuration.TargetMBean,[Proxy for AdminServer: Name=AdminServer, Type=Server])
bTargets=array([],Class.forName('javax.management.ObjectName'))
cd('/AppDeployment/wsm-pm')set('Target',bTargets)
Error: set() failed. Do dumpStack() to see details.
dumpStack()com.oracle.cie.domain.script.jython.WLSTException: java.lang.IllegalArgumentException: Param type [Ljavax.management.ObjectName; not supported
>
cmo.
cmo.setTargets(newTargets)
ls()...
-rw- StagingMode nostage
-rw- Target bi_cluster
-rw- ValidateDdSecurityData false
print get('Target')array(weblogic.management.configuration.TargetMBean,[Proxy for bi_cluster: Name=bi_cluster, Type=Cluster])
cd('/Servers/AdminServer')
tsvr=cmo
cd('/AppDeployment/wsm-pm')
newTargets.append(tsvr)
print newTargetsarray(weblogic.management.configuration.TargetMBean,[Proxy for bi_cluster: Name=bi_cluster, Type=Cluster, Proxy for AdminServer: Name=AdminServer, Type=Server])
cmo.setTargets(newTargets)Error: setTargets() failed. Do dumpStack() to see details.
dumpStack()com.oracle.cie.domain.script.jython.WLSTException: java.lang.NullPointerException
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.ScriptInvocationHandler.invoke(ScriptInvocationHandler.java:143)
at $Proxy1.setTargets(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: java.lang.NullPointerException
at com.oracle.cie.domain.script.jython.ScriptInvocationHandler.set(ScriptInvocationHandler.java:175)
at com.oracle.cie.domain.script.jython.ScriptInvocationHandler.invoke(ScriptInvocationHandler.java:103)
... 25 more

Finally solved it myself. For the interest of others.
With 2 calls of moveTargets, the target bi_cluster is replaced with BIP_Cluster_1 for all Library and AppDeployments.
moveTargets('bi_cluster','BIP_Cluster_1','Library')
moveTargets('bi_cluster','BIP_Cluster_1','AppDeployment')
#=======================================================================================
# moveTargets - target configBeans from oldDestination to newDestination
#=======================================================================================
def moveTargets(oldDest, newDest, cfgBean) :
print 'Moving configBean ' + cfgBean + ' from ' + oldDest + ' to ' + newDest
cd('/' + cfgBean)
bag=ls(returnMap='true')
for bean in bag:
     cd('/' + cfgBean + '/' + bean )
     workBean = cmo
     print "cfgBean " + workBean.getName() + " "
     # if oldDest is in Target of cfgBean
     if str(get('Target')).count(': Name=' + oldDest + ",")!=0:
       # unassign oldDest
       unassign(cfgBean,bean,"Target",oldDest)
       print " +- unassigned " + oldDest + " "
       # if newDest is not in Target of cfgBean
       if str(get('Target')).count(': Name=' + newDest + ",")==0:
         # assign newDest
         assign(cfgBean,bean,"Target",newDest)
         print " +- assigned " + newDest + " "

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Ghost image for multiple selection in JTree while drag and drop.

I am unable to create a Ghost image for drag and drop with in the JTree for multiple selection, i got some examples but all are for single selection ,
Idea of creating buffered image is good , but unable to create it for multiple selection , tried a lot but got weird results.... can any body give me any clue about this , if got any example that will be fantastic.
Thanks & Regards
Sandeep Mandori

sandeep_mandori wrote:
I am unable to create a Ghost image for drag and drop with in the JTree for multiple selection, i got some examples but all are for single selection ,
Idea of creating buffered image is good , but unable to create it for multiple selection , tried a lot but got weird results.... can any body give me any clue about this , if got any example that will be fantastic.
Thanks & Regards
Sandeep MandoriTry this:
    private TreePath[] dragPath;
    private BufferedImage[] image;
    private void createDragImage(JTree tree) {
        if (dragPath != null) {
            try {
                image = new BufferedImage[dragPath.length];
                for (int i = 0; i < dragPath.length; i++) {
                    Rectangle pathBounds = tree.getPathBounds(dragPath);
TreeCellRenderer r = tree.getCellRenderer();
DefaultTreeModel m = (DefaultTreeModel)tree.getModel();
boolean nIsLeaf = m.isLeaf(dragPath[i].getLastPathComponent());
MutableTreeNode draggedNode = (MutableTreeNode) dragPath[i].getLastPathComponent();
JComponent lbl = (JComponent)r.getTreeCellRendererComponent(tree, draggedNode, false ,
tree.isExpanded(dragPath[i]),nIsLeaf, 0,false);
lbl.setBounds(pathBounds);
BufferedImage img = new BufferedImage(lbl.getWidth(), lbl.getHeight(),
BufferedImage.TYPE_INT_ARGB_PRE);
Graphics2D graphics = img.createGraphics();
graphics.setComposite(AlphaComposite.getInstance(AlphaComposite.SRC_OVER, 0.5f));
lbl.setOpaque(false);
lbl.paint(graphics);
graphics.dispose();
image[i] = img;
} catch (RuntimeException re) {}

How to use the same (selection) paths in multiple images for batch processing?

I have a whole bunch of photos I need to batch process, but, when creating an action for this, I stumbled upon the problem that the paths I selected with the pen tool, and saved under the "Paths" tab need to be in every image for to be used in the action. I did try to solve it for some time, but couldn't figure out. Any ideas?
Many Thanks
Carlos

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Multiple STATEMENT nodes in target structure for JDBC adapter

Hi All,
I have a file to JDBC scenario . At the receiver side we need to update two tables simultaneously .
So in the target structure for JDBC , is it possible to have two STATEMENT nodes , so that 2 tables can be updated simultaneously.
Please help.
Thanks & Regards,
Loveena.

Hi,
U can do tht..please see below link..
http://help.sap.com/saphelp_nw04/Helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
Regards,
Manisha

Can I create multiple Targets for one Trigger?

What I would ultimately like to have is a target by my trigger as well as another target at a different location on the page, both appear when I rollover the trigger.
Please let me know of ways I can achieve this.
Thanks guys!

Hi Jendarhy, I'm also trying to get one trigger to display multiple targets. Were you able to figure out how to do it? If so, would you be kind enought to share the answer?
I saw someone post this answer but I still can't figure out how to set it up:
In this case, the target container is a canvas. You can draw anything you like in this container. If you want two targets, draw them both, seperatly, but inside of the target container. everything in that container will appear when you activate the trigger.

Multiple target images for disjoint rollovers

Similar Messages

Maybe you are looking for