Multiple Territories for Single Account

We have multiple salesforces selling products/services to the same account. Each of these salesforces have their own territory and region alignments based on zip codes.
Question 1: Can an account have multiple territories? For example Territory1 for Salesforce1, Territory2 for Salesforce2, Territory3 for Salesforce3.
Question 2: Can the territory alignment be based on zip codes? The territories are drawn up using a zip code mapping tool.

Tyen,
For question 1 the answer is unfortunately no. You can't populate the same field in the DB with 2 different values just because it is a different user looking at the application layer.
For question 2 I have to say no as well. WFs and default values don't work well with the Territory field as is. Plus you are trying to use the Zip Code field which cannot be separated from the address combo and therefore cannot be used as a triggering event either.
Colin.

Similar Messages

How to set multiple senders for one account

Hi all,
I have a BIS account with my provider and a paid gmail account which collect for me mails from different address. Is it possible to set multiple senders for this account, thus it seems that I'm replying from one of these address and not only from my google address? In fact, it's important for me also that all mails come out from the same SMTP server (google).
Thanks in advance.
Best regards,
Pierluigi

For the BlackBerry to "send using" a specific email account, it must be set up on your BIS account as an email account, otherwise, you can send from that account.
You can do that, and then block ALL incoming emails from those accounts, and allow only incoming mail from your one Gmail account, if you desire.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How to uploade multiple flatfiles for single transaction using BDC?

How to uploade multiple flatfiles for single transaction using BDC?

Hi,
You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
Then loop at the internal table and call BDC transaction to process the data.
Regards,
Ferry Lianto

Set multiple passwords for single PDF

Hi All,
Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
Thanks
Augustine

Thank you.
Do you mean different IDs can be used for a single PDF and can make the PDF protected.
Regards
Augustine

Multiple Alerts for Single error in interface is a design not issue with XI

Hi,
This is constraint of alert mechanism in XI.
You get multiple alerts for single error,the reason is that since XI will try multiple times to process a failed message so each time it fails in its tries it will send an e-mail.to stop this the "Suppress multiple alert" box is checked but what it does is that it stops all the alerts of that specific rule until the first one is confirmed.Personally i myself (and other experts too) suggest to leave the box unchecked coz its better to get tons of mails for a specific error rather than not getting any e-mail and thereby wasting time in tracking/solving the issue resulting in revenue loss to client.
As per above comments is it possible to write an ABAP code so that we can stop multiple alerts to be sending to inbox. I am sure if we can delete message from some table then we can stop sending multiple messages to alert inbox and to the subsequent mail id also. I am not sure how alert being generated. I know where they get logged in this table sxmsalertlogger. If someone know how it works in background please let me know the table names.
Regards
Ria

Hi Gaurav,
You can personalize the way in which you receive alerts.
Simply choose Personalization to make individual settings for your alert inbox. You can determine a substitute who will then receive the alerts. In addition, you can choose whether alerts are sent to you time-independently or time-dependently. The default setting is that alerts are sent time-independently to your alert inbox and via e-mail when they occur. You can additionally select the communication methods FAX and SMS for time-independent alert notification.
If you want to receive alerts only on certain days for a certain time, simply select the option for time-dependent sending of alerts and choose Create to create a new table entry. You can then choose the corresponding factory calendar, the time interval, and communication channel. Alerts that arise during this time frame will be sent in any case to your alert inbox. If you have also selected other communication channels, the alerts are additionally sent to you using these other channels.
This above text is from SAP help, do you think by changing anything in personnalisation i can stop multiple alerts. I have some issue with Personalisation link so was wondering would be worth to get tht personalisation issue resolved.
Regards
Ria

Partner Function Queries Multiple Partners for Single Partner function SO

Hi Experts
Is it possible to enter multiple partners for Single partner Function in SALES ORDER
For Ex : We have created Z1 as a Partner function for Sales Executives : and Sales Executive 1 , Sales Executive 2 Sales xecutive 3 etc as sales Partners for Z1 partner Function .
Now Is it possibe to enter for Z1 -
sales Exeutive 1
Z1----
Sales executive 2
Z1----
Sales Executive 3............
I would be greatful if you repond the same at the earliest
Thanks
Rashmi K

Hi Rashmi,
The requested function is possible.
In the customizing of partner function, you could set the field Unique as blank. Then you could enter multiple partners for same partner function.
IMG->SD->Basic functions->Parnter determination->Partner Functions
Hope it helps.
Thanks and best regards,
Smile

MX Electronic accounting - Set multiple UUID for single MIRO Document number

Greetings everyone
In my company already implemented the neccesary changes required by the new laws in MX Electronic Accounting inside the MIRO transaction (note 2093189), as well as the related notes requested for electronic accounting. Everything's working fine so far since right now we save the UUID field from CFDI XML file into an Invoice Document number. But now in my company request to save multiple CFDI invoices into a single Invoice document number. My approach seems to be simple because we only need to generate a new window to save the multiple UUID numbers and link the Invoice Document Number (BELNR), company code and fiscal period/year and UUID document into a Z custom table. But I have some questions that I'm not sure how will affect:
How does affect the montly policies report that we need to send to the government (SAT).
How do we need to handle the policies XML file in this type of scenarios
Any of you have the same scenario?
how do you handle this kind of scenarios?
So far I read the following notes but I can't find a clue so far for this kind of scenario (Am I missing something?)
(MX) Contabilidad Electrónica - RME 2014 Anexo 24
Notes:
http://service.sap.com/sap/support/notes/2041490
http://service.sap.com/sap/support/notes/2093189
http://service.sap.com/sap/support/notes/2042663
Thanks in advance and best regards
Lorenzo Martín Olmos

Hi Shekhar
Thanks a lot for you comments and I apologize for the late reply. As you point this is the most common scenario. In my case when the creditor is the Mexican Social Security Institute (IMSS), and after the payment, either IMSS and INFONAVIT (the governments institute for workers housing) generates different CFDI invoices.
How do you currently handle this scenario?
Thanks for your comments. Warm regards
Lorenzo Martín Olmos

Multiple Names for sender account?

Is it possible to have multiple sender 'names' on a single account.
For example:
I would like to have a personal 'name' for emailing friends...
johnsy <[email protected]>
and for emailing clients etc...
a.johns <[email protected]>
I've figured out how to add multiple addresses to one account, but not multiple names.
Can this be done?

Guess not.

Multiple Signatures for One Account

I have multiple signatures associated with a single account and would like to be able to choose which one to use when composing a new message. There's no choose signature option in the header and it doesn't appear under the header customize menu. I can go into Preferences>Signatures and choose from there which signature to make the default, but I'd like to be able to choose in a more streamlined process. Any ideas?

mjuliano wrote:
I have multiple signatures associated with a single account and would like to be able to choose which one to use when composing a new message. There's no choose signature option in the header and it doesn't appear under the header customize menu. I can go into Preferences>Signatures and choose from there which signature to make the default, but I'd like to be able to choose in a more streamlined process. Any ideas?
click on the little icon with the triangle and some lines to the left of the "From" field in a message composition window. in the resulting pulldown menu choose "customize". check the box next to "Signature" and click "OK".
now you'll get a signature pulldown menu where you can choose which signature to use with this message.

Tolerance Limits: Multiple Invoices for single POs, Single Invoices for Multiple POs

Hi,
I'm currently looking at tolerance limit configurations, primarily the DQ (Quantity) and PP (Price) tolerance keys and had a couple of questions where you have the scenario of multiple invoices or multiple POs.
1. If I had multiple invoices for a single PO, collectively they match the quantity and price on the PO; When I enter the first invoice into SAP it will be well below the lower price and quantity limit of the PO as it is one of multiple invoices to be entered. My question is what happens to the invoices in SAP, do you still post them despite the error message and they are just blocked until collectively the invoices match the quantity/price of the PO?
2. If I had an invoice that related to multiple POs, when entering the invoice can I link this to multiple POs?

You don't use user exits or enhancements for this. Use a data transfer routine and assign it to your item level copy control config. Spilt keys are controlled by setting the value of VBRK-ZUKRI. Otherwise, you can use multiple payers or addresses to control it.

Multiple values for single field

hi
In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record

Hi,
It is generally taken care using BDC's by Table Control, and if you are using BAPI's then there are tables for ITEMS.
Regards,
Atish

Create Multiple tasks for Single Item in List using state machine workflow in sharepoint

Hi,
I want to create multiple create tasks for Single Item in List based on Assigned to column using state machine Workflow through visual studio
Here Assigned to column allows multiple users. so i have to create task for every user based on column .
I'm trying for this but i didn't got any solution
Please provide solution for this.

Hi,
According to your post, my understanding is that you wanted to allow multiple users to approve.
There are some articles about creating parallel tasks in state machine workflow, you can have a look at them.
http://www.codeproject.com/Articles/477849/Create-Parallel-Task-in-State-Machine-Workflow-in
http://msdn.microsoft.com/en-us/library/office/hh128697(v=office.14).aspx
http://social.technet.microsoft.com/Forums/office/en-US/b16ee858-4360-479a-a686-4ee35b7be9db/sharepoint-2010-workflow-creating-multiple-tasks?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties.
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

Multiple MouseEvents for single click

Hello,
I have created a reusable component based on a JPanel.
Our company uses my component in several Swing applications, all of which use a JFrame.
My component has a mouse listener for mousePressed events.
Recently a new app, also based on a JFrame, has started to use my component. In this new Swing app, my component's mousePressed listener gets called THREE TIMES for each mouse pressed.
In all other apps, if the user presses the mouse once, I get only ONE call to my mousePressed listener.
Looking at the stack traces into my mousePressed() method I notice this:
In the apps where mousePressed() is only called once, the stack looks like this:
     at java.awt.Component.processMouseEvent(Component.java:5131)
     at java.awt.Component.processEvent(Component.java:4931)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3639)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3480)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3162)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
     at java.awt.Container.dispatchEventImpl(Container.java:1609)
where as when mousePressed() gets called multiple times, the stack trace shows this:
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:218)
     at java.awt.Component.processMouseEvent(Component.java:5131)
     at java.awt.Component.processEvent(Component.java:4931)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3639)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3480)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3162)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
     at java.awt.Container.dispatchEventImpl(Container.java:1609)
Does anybody have any idea of why AWTEventMulticaster would be on the stack for one app and not for another?
And how can I prevent getting called multiple times for a single mouse click?
Thank you,
Ted Hill

You don't understand. My JPanel implements the MouseListener interface and its mousePressed(MouseEvent ) method gets called THREE TIMES on a single mouse click. Normally it should only be called ONCE.
It seems that the app that is using the JPanel extension has somehow registered it as interested in mouse events MULTIPLE TIMES.
I've never seen this before in Swing and was wondering if anyone else has.
Thanks,
Ted

Multiple Territories for Single Account

Similar Messages

Maybe you are looking for