Multiple toggle buttons to the same destination causes conflicts

I'm trying to set up multiple toggle buttons so that a user can click on a button at any time and set the state of the dashboard. Each toggle button has a unique value (and each one has the same static value for both on and off) and I've mapped all the toggle buttons to the same destination cell. But they all seem to be competing to set the desination to their preferred value even when they're not being clicked on and, as a result, the dashboard keeps changing state in unexpected ways. Is there a fix for this?

When you have multiple components trying to insert to the same destination cell, the front-most object wins at load time. So, if tb1, tb2, tb3 (tb3 being the front-most object) are all set to respectively insert values 1, 2, 3 to the same cell, the cell will have value 3 initially.
Now there is an issue when objects in different groups try to insert to the same cell. The release note for FP3 implies that this problem is resolved, but I think it is not fixed completely...

Similar Messages

Multiple submit button on the same form

Hi,
I have created a PL/SQL procedure which generates a HTML form using htp and below is part of the code.
Create or Replace PROCEDURE OBM_PROCEDURE
htp.formOpen(OWA_UTIL.GET_OWA_SERVICE_PATH || 'insert_obm');
htp.formSubmit(cvalue=> 'Insert');
This creates the form and clicking Insert button calls the other procedure (insert_obm).. works fine.
I could create other buttons like "Query" "Update" "Delete" on the same form using following.
htp.print ('<INPUT TYPE=submit VALUE="Query"> ');
But all the buttons call the same form (insert_obm) since they are in the same form. How do I make the buttons call different procedure?
Thanks,
Jee

Hi,
The best way to do is call a single procedure as you are doing on form submit and check which form submit was clicked ,say based on the submit value and then do the processing accordingly i.e whether it is INSERT or DELETE.
Hope this helps,
Thanks,
Anu

Can I have multiple submit buttons on the same form?

Hi!
I'm creating a web page that allows the user to build a mail filter, and I would like to have to submit buttons, one to add more fields to the filter and another one to save the filter... I could insert the two buttons on the, but I don't know how to distinguish them while doing the process of the form on a jsp page. Any ideas?

You can create additional submit buttons using Javascript buttons:
<input type='button' value='Add Fields'
onClick='this.form.action="/servlet/AddFields";this.form.submit()' />
<input type='button' value='Save Filter'
onClick='this.form.action="/servlet/SaveFilter";this.form.submit()' />
The value of "onClick" is a block of Javascript, so you can all a function to validate the form before submitting, etc.
Mike W.

Multiple Apple TVs on the same network

I teach at a school and have used an Apple TV in conjunction with my iPad for presentations. I find it invaluable. Other teachers at my school would like to do the same, but I'm told by our tech support that multiple Apple TVs on the same network cause problems. When I ask them what problems, they aren't sure. They just tell me that other school have experienced problems. Other than a wifi bandwidth problem, I can't imagine what kind of problem it would be. A collegue of mine wants to jump onboard but desn't want to make waves. Does anyone know of any problems?

I have two Apple TV's, one in the living room and one in the bedroom... however, the living room is the only one that my iphone Remote APP is connecting with... I've named/tagged the two ATV's hoping that the Remote APP would provide me the option on which one to control, but it doesn't....
I've confirmed that home sharing is "on" with in all devices "settings"...
Any suggestions?

I-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!

i-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!

Are you restoring as new?

Multiple scripts running at the same time?

Is there a way to have multiple scripts successfully running at the same time?
At the moment if I start a second script while the first one is still running, the second one completes successfully but the first one stops. This seems to be because the first one is no longer the active document once the second one opens so can't continue.
Is there another way to script things like this so that multiple can run independently at the same time? You might ask why I'd want to run two at the same time and not just wait, but i've setup an asp.net web form front end and having problems if two people click the button around the same time.
I'm guessing this isn't going to be possible and i'm going to have to look for ways of doing this in asp.net instead and somehow queue the requests so you have to wait longer if the script is already running?
Thanks,
Andy

I'm
guessing this isn't going to be possible and i'm going to have to look
for ways of doing this in asp.net instead and somehow queue the requests
so you have to wait longer if the script is already running?
This is correct. The scripting interface to PS is single-threaded so you will need to queue up requests.

Can I have multiple event structures with the same event cases?

Hello,
I'm doing an application that reproduces the front panel of the HP6675A power supply. To achieve this, I have done a state machine with different states
(initialize, measures, voltage, current, ocp, ov, store, recall, etc). In each state, should have an event structure that catches the events of the buttons, like for example: if the current state is the Voltage mode and the user press the current button the next state will be the Current mode. For this in each state of the state machine should be the same event structure with the same events.
My problem is that the Vi doesn't work properly when I have multiple event structures with the same event cases. There are some possibily to do this, and how? Or is impossible to have multiple events? I have been reading some posts, but I don't find solutions.
Any help is appreciated.
Thank you very much.
Solved!
Go to Solution.

natasftw wrote:
Or as others mentioned, make two parallel loops. In one loop, have your state machine. In the other, have just the Event Handler. Pass the events from the handler to the state machine by way of queues.
A proper state machine will not need the second loop. The "Wait For Event" or "Idle" state (whatever you want to call it) is all you really need in order to catch the user button presses. The setup is almost there. Maybe add a shift register to keep track of which state to go to in the case of a timeout on the Event Structure.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Multiple presentation servers using the same RPD

Hi everyone,
So as most people know, the iPhone has a cool app that allows you to login and look at your OBIEE content. In theory it's really cool, but as it turns out, a lot of the cool graphs default to Flash and Flash is not supported by the iPhone.
Using a flag in the instance config file, its possible to default all graphs to png's instead of Flash. But that causes all the interactive drillability to go away since it's just a flat picture.
It seems that an elegant solution to this issue would be to have two presentation services running; one that defaults to Flash and one that defaults to png's. Then let the OC4J container determine if the device accessing the website is a mobile device or a full client browser. Mobile devices get routed to the png's and non-mobile devices go to the standard Flash page.
Although not supported by Oracle, it is possible to setup multiple presentation services on the same server. In fact, RNM has a great blog about how to accomplish this (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/).
I was able to setup two presentation services (AnalyticsWeb and AnalyticsMobile) and point them at the same catalog folder. That way you don't have to duplicate you're work.
The one thing I couldn't figure out how to do was to point them at the same RPD file. Ideally, we would have one rpd file with the master metadata definitions, and both presentation services would drive from that single RPD. However, the BI Server throws and error of the same RPD appears twice in the NQSConfig.ini file. I also created a shortcut to the master RPD, but upon startup, the BI Servers said that it was not a valid repository file.
Worst case scenario, I could just use copy & paste to duplicate the single repository. And then each time I updated one, I would just need to delete the other and re-copy. But that seems a little tedious and I was hoping for a more elegant solution.
Does anyone know how I could get the NQSConfig.ini to let me point to the same RPD twice? Is there some kind of symbolic link or image I could create?
If it helps, I'm working with OBIEE 10.1.3.4 on a Windows Server 2003 environment with the OC4J standalone container.
Thanks for the help!
-Joe

Hey Everyone,
Just to add the finishing touch to this thread, the following can be implemented to perform the redirect based on mobile versus traditional PC devices.
In the folder: C:\OracleBI\oc4j_bi\j2ee\home\default-web-app
I created the following OBIEE.html file
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html lang="en,us">
<HEAD>
<TITLE>Test OBIEE Redirect Page<TITLE>
</HEAD>
<BODY>
<script type="text/javascript">
var agent = (navigator.userAgent).toLowerCase();
var weburl = './analytics/';
var moburl = './analyticsMobile/';
var reg_exp = /(ipod|iphone|android|opera mini|blackberry|palm os|palm|hiptop|avantgo|plucker|xiino|blazer|elaine|windows ce; ppc;|windows ce; smartphone;|windows ce; iemobile|up.browser|up.link|mmp|symbian|smartphone|midp|wap|vodafone|o2|pocket|kindle|mobile|pda|psp|treo)/;
if( reg_exp.test(agent) ) {
window.location = moburl;
else {
window.location = weburl;
</script>
</BODY></HTML>
The javascript gets the USER agent variable and does a regular expression match to see if it's any popular handheld device. If so, it redirects them to the mobile address. Otherwise the user is directed to the standard site.
All I need to do is pass around the URL:
http://localhost:9704/OBIEE.html (instead of the standard http://localhost:9704/analytics)
And users will be dynamically sent to the correct location.
thanks everyone!
-Joe

Multiple connection pools in the same DB physical source

Hi, I have this situation in BI Admin:
A single DB with 2 physical schema and 2 Connection Pools with OCI 10/11g.
Clicking on any table I can see the data after selecting the right connection pool for that table.
I created a Business Model based upon tables from one of the 2 physical schemas and a corresponding presentation layer. It is consistent and I can view the related subject area in Answers, but when I select a Dimension column (CONVERGENZA_NEGOZIO.STATO) and the fact measure ( Convergenza_Fact.INCASSO ) in viewing results I get this error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT CONVERGENZA_NEGOZIO.STATO saw_0, Convergenza_Fact.INCASSO saw_1 FROM Convergenza ORDER BY saw_0
Is it caused by the multiple connection pools under the same DB?

Yes I think that's correct, but only if you're going to use the same user to connect to them.
If you have a single user you're using to connect to a database to read data which happens to be over more than one schema, you'd use one connection pool.
However if you have entirely separate schemas (eg. different applications) and need to use a different user for each then you would use one connection pool per schema. Also if you thought you might move one of the schemas to another physical database at some point in the future it might be prudent to use a separate connection pool from the outset.
If you're still getting the error that the table cannot be found and your users have full permissions then logically the table that's being looked for does not exist, or you have not qualified it. What I mean by that is if you are connecting as USER2 and SELECT * FROM TABLE_A then the database will assume that you mean USER2.TABLE_A. If you mean USER1.TABLE_A then you need to make sure the qualification is in there.
In the admin tool check your Physical layer is set up correctly with your Physical Tables residing in the correct Physical Schemas.

Multiple plants exist in the same invoice - Error

Dear All,
When i am doing the invoice processing in MIRO, eventhough i have not entered the PO number, with the basic details like Invoice date, posting date, Amount , currency and Invoicing party, the system issues an error message "Multiple plants exist in the same invoice". Could you please anyone suggest me what is the real issue and route cause for this error.
Many Thanks,
Panneer

Hi,
firstly try to search the forum. It was asked before already.
You may check SAP Note 1571695, maybe it's your case.
Regards

Multiple Plants in MIRO - Multiple plants exist in the same invoice

Dear All,
When i am doing the invoice processing in MIRO, eventhough i have not entered the PO number, with the basic details like Invoice date, posting date, Amount , currency and Invoicing party, the system issues an error message "Multiple plants exist in the same invoice". Could you please anyone suggest me what is the real issue and route cause for this error.
Many Thanks,
Panneer

Hi,
Please check SAP Note 1571695 - 8I820 error message in MIRO transaction for the same.
Summary
Symptom
In MIRO transaction, during invoice verification, system prompts an error message as "Multiple plants exist in the same invoice".
This error will be prompted in scenarios where service tax is applicable and multiple plants exists in the same invoice.
Other terms
Transaction MIRO , BADI J_1I_MM_SER_CAT_DETERMINE, 8I820, 820, multiple plants, plant, error, MR11, BAPI, FI.
Reason and Prerequisites
Program error.
Solution
Apply the code corrections present in the Note.
Regards,
Sandesh Sawant

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

How do I use multiple local workspaces for the same website in VS2013?

For quite some time I've been using VS2010 with multiple workspaces mapped from the same TFS branch to test different variants of a website in parallel. The internal web server (Cassini) seems quite happy to run multiple versions and simply maps a new port
number for the second and subsequent instances that start up.
We are now looking to move to VS2013, so have to use IISExpress since the 'internal' web server is no longer provided.
How do I configure things so that if I open a single workspace, IISExpress runs against that workspace using the default port number (specified in the solution), but if I open a second instance in a different workspace it correctly uses a new port number
and working folder. Do I need to invoke IISExpress using the command line (presumably from each workspace) and specify the relevant defaults or is there some way to enter this in the local config file for IISExpress?
My initial attempt at editing to config file resulted in the 2nd and subsequent instance using the same physicalfolder as the first instance, presumably because the speficied site name and port number are the same!

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Based on your description, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
or IIS forums: http://forums.iis.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??

The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

How to load multiple HTML5 canvas on the same page (the proper method)

Hi,
I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
Here is a sample of what I'm doing:
1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
3rd: Edit the javascript like this:
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsFirst = createjsFirst||{};
            var createjs = createjsFirst;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/first.js"></script>
        <script>
            function initFirstAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("firstCanvas");
                exportRoot = new libFirst.first();
                stage = new createjsFirst.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                createjsFirst.Ticker.addEventListener("tick", stage);
        </script>
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsSecond = createjsSecond||{};
            var createjs = createjsSecond;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/second.js"></script>
        <script>
            function initSecondAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("secondCanvas");
                exportRoot = new libSecond.second();
                stage = new createjsSecond.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                createjsSecond.Ticker.addEventListener("tick", stage);
        </script>
<body onload="initFirstAnimation(); initSecondAnimation();">
Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
Many thanks!
#flash #reborn

I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
$(document).ready(function () {
        var canvas, stage, exportRoot;
        // First movie
        canvas = document.getElementById("firstCanvas");
        exportRoot = new libFirst.first();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libFirst.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Second movie
        canvas = document.getElementById("secondCanvas");
        exportRoot = new libSecond.second();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libSecond.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Third movie
        canvas = dument.getElementById("thirdCanvas");
        exportRoot = new libThird.third();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libThird.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);

Multiple toggle buttons to the same destination causes conflicts

Similar Messages

Maybe you are looking for