Multiple Topics/Queue for Single MDB?

Hi -
Is it possible to configure single MDB to handle multiple Topic/Queue in JMS? I used two <jndi-name/> tags for two topics, but only the first one got picked up by the AS7 server. If one MDB can be configured to take multiple topics, how should I configure it? Some configuration example would be most helpful.
Thanks!

Hello,
According to the Ejb 2.1 specifications, in section 15.4.12 "Association of a Message-Driven Bean with a Destination or Endpoint.
A message-driven bean is associated with a destination or endpoint when the bean is deployed in the container. It is the responsibility of the Deployer to associate the message-driven bean with a destination or endpoint."
Based on this sentence, I would be led to beleive that a single mdb reading on multiple destinations would not be supported. You can try x-posting this to the application server forum.
If you desire the same behavior for the multiple topics, you could always use inheritance on your mdb class, or transfer the logic code into a helper class that is reused by multiple, independent MDBs classes....

Similar Messages

  • Multiple webdynpro applications for single webdynnpro component

    I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
    Rgds,
    Praveen

    Hi Saravanan,
    I need to modify it from the portal end, not at the application level.
    I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
    Regards
    Shivas Bhan

  • Multiple contact persons for single vendor--LSMW

    Hi experts,
        i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
    Thx in advance,
    Neelu

    Hi
    in our company v wil upload contact person details in Sales Data......
    so its not possible to upload more than one contact person for vendor....
    can u tell me wr u people wil enter the contact person details?
    Regards
    Smitha

  • Multiple storage locations for single material - ECC 6.0

    Hi
    Can anyone let me know, how one can map multiple storage loctions for single material?
    regards
    Sanjay

    hello,
    Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
    Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
    Nikhil

  • Flex with JMS Topic/Queue for Asynchronous messaging

    I have been working on Flex and JMS integration using Data
    Services for Asynchronous messaging. I am able to do this
    successfuly. Now I am in need to do the same without using the Data
    Services piece.
    For doing this I have done the following ......
    I have created a JMS Webservice in the Oracle JDeveloper 10G
    along with Webservice Client.I am able to Listen to JMS Topic/Queue
    ( this has been created in the Oracle AS ) using this Webservice
    and receive the messages from this JMS Topic/Queue
    Asynchronously.....
    But If I need to use the Flex Client , I am not able to
    Communicate with this Webservice to listen to the JMS Topic/Queue.
    Did any one in this forum tried to communicate with JMS
    Topic/Queue without using Flex Data Service.If so please share your
    inputs.

    Here is my confusion (I'm using J2EESDK1.3).
    On a local server I did the following
    j2eeadmin -addJmsFactory jms/RemoteTCF topic -props url=corbaname:iiop:mars#mars
    In the app client running on the local server I had the code
    ic = new InitialContext();
    // JNDI lookup. The resource factory ref points to the
    // Remote Connection Factory I registered
    tcf = (TopicConnectionFactory)ic.lookup("java:comp/env/jms/TopicConnectionFactory");
    // The env ref points to jms/Topic of the local server
    pTopic = (Topic)ic.lookup("java:comp/env/jms/PTopic");
    So I'm assuming that I'm using a connection factory that connect to mars and a Topic on the local box.
    On remote server mars, I deployed a MDB which use
    jms/TopicConnectionFactory and jms/Topic. But I'm thinking this jms/Topic and the one I used on the local box are not the same one. Right? Then how could the app client and the MDB share messages?
    Some of my explanation I don't if it makes sense or not.
    ConnectionFactory is a way to tell what kind of connection it could generate (Queue, Topic, Durable etc) and Where the connection would go to (local or remote).'
    As for as destination, I'm not sure. How could two server share one Topic?

  • How to use multiple tape drive for single filesystem on single client.

    Hello All.
    I want to backup single filesystem with multiple tape drive.
    Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
    Backup client has a  single backup filesystem like /data1  directory with 4 LTO6 drives.
    /data1 directory doesn't have a sub-direcotry, just present a files.
    If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
    Please anybody answer the questions.
    Thanks advanced.

    See how to use multiple tape drive from single client when I want to backup single filesystem?

  • Multiple Excise Invoice for Single GRPO

    Hello All
    How do we create multiple excise invoices from a single GRPO document.
    Thanks
    Santhosh.K

    Hi
    As per the scenario you mentioned.
    You can't create multiple Excise Invoice against Single GRPO. And as per the law of excise also there is no way to do like this.
    Gate  Pass  made against delivery when some vendor send the item to the client. Time quantity and rate with the duties are mentioned in that.
    similarly when client received the material all the above should be there in the gate pass.
    Ashish Gupte

  • Multiple email addresses for single characteristics in Email Bursting

    Hello Experts,
    We have requirement of Bursting email to external sales representative with only their relevent data.
    We have used Bex Broadcaster with email Bursting as distribution type . But the problem is we have to send out
    email to multiple sales reps for a particular sales rep i.e for a particular Sales rep we have to maintain multiple
    email ids of sales rep and infoObj can have only 60 chars long. So I cannot put more than one email id.
    Is there any work around to overcome this difficulty.
    Also I could have use individula schedule but number of schedleis very high around 200.
    Thanks,

    I understand you issue and I dont think It can be solved in BW as they system is not expecting the users email address to be more that 60 chars,  however you could create a rule in outlook (or whatever mail application you use) to forward all emails containing this header to the other email addresses.   Thats my only idea

  • Multiple Work Center for single internal activity ?

    If more than one work center used for single internal activity how can work center be allocated  ?

    Hi Yogesh,
    I understand that, you have a project activity in which different groups of people are working and you want to plan costs for all these groups of employees under the same project activity.
    To achieve this, create different activity elements under that activity and assign specific WCs and Work duration to all these activity elements so that system will calculate aggregated costs and scheduling dates accordingly.
    Hope this helps

  • Posting multiple tax codes for single line order in MIRO

    Hi all ,
    I have received a request from my business colleagues to investigate the possibility of posting multiple tax codes against a single line order in MIRO.
    This apparently can be a possibility for such things as training.
    I have searched a number of forums and tried and tested different ways in my develoment client but am unable to find a solution. admittedly I am no real expert in this area and would be gratefu;lt of any ideas / assistance  / etc..

    HI,  There is a possible solution for this scenario.
    1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
    2. While posting the Invoice (TRX - FB60) following steps need to be followed.
    3. Amount has to be split into two line items
    4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
        created for 12.5%
    5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that    
        was created for 12.36%.
    Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
    Regards
    K.Sanjai Babu

  • Multiple PR's for single sale order

    Hello all,
       We are having Thrid party Scenario.For the sale order with multiple line items,single PR is created.
       Is it possible to create PR for each line item in slae order?
    Regards,
    Shyam

    I dont think that you can influence this. Why would you need individual PRs? you can process PR items individually.

  • Multiple message threads for single contact

    A friend of mine happens to send iMessages from two accounts and it creates two message threads in Messages for me. Is there a way to somehow show one thread covering single account, even though it has multiple "physical" sources? Thanks.

    No.

  • Multiple master regions for single detail

    I am trying to created a master / detail with spry. the problem is that I need to have the master area grouped in three different sections separated by titles and each title would have styling including background image.
    I can think of two different ways of doing it but each one has it's own problems:
    1. create mulitiple master regions with different data sources that would update a single detail region. I simply do not know how to do this.
    2. add styl sheet to the .html that has the data table for the dataset. the problem is that the dataset only caries the data through but not the styling associated with it.
    I am new to this and any kind of help is realy appreciated.
    thanks in advance

    I didn't see any multiple dataset detail regions in your page.
    Also this might a other solution for you, the Spry DataSet Shell;
    It allows you to swap between different datasets.
    http://labs.adobe.com/technologies/spry/samples/data_region/DataSetShellSample.html
    http://labs.adobe.com/technologies/spry/samples/data_region/DataSetShell_accordion.html

  • Multiple index entries for single object.

    Hi,
    Can someone guide me whether coherence allows multiple keys to be inserted in an index for given record(value)? I mean I will insert a single 'value' in the cache and multiple keys for it in the index, and I should be able to search that 'value' using ANY one key (not the combination of keys). I mean the search should use the index and hence should be fast. (Similar to lucene where it will tokenize the specified text and add individual tokens to the index so that you can locate given document using any single token).
    Bharat

    Hi Bharat,
    Hopefully I am understanding your question correctly.
    Adding an index allows Coherence to correlate attributes of values stored in a cache to the corresponding keys in the cache which can result in an increase in the performance of keySet and entrySet methods. This mechanism does not give you an alternate key to use with the get method.
    cheers,
    -David

  • Multiple Proxy Services for single JMS endpoint

    Hi Forum,
    OSB Proxy services do not allow to have the same endpoint. I have defined 2 proxy services to look into one JMS queue. But it does not allow to do this.
    I want to fetch messages from the same queue by more than one Proxy (parallel execution to empty the queue faster). How can I do that?
    Thanks in advance..
    CK

    OSB/JMS by design are of little use here. For parallel execution to empty the queue faster we can
    1) use distributed Q in cluster and multiple proxies can process on the distributed Q.
    Manoj

Maybe you are looking for