Multiple track comping?

Is it possible to do comping from multiple tracks instead of normal comping from takes in Logic pro X?
If so please give me a hint on how to do it....
Regards

http://help.apple.com/logicpro/mac/10/#lgcpb194093e

Similar Messages

How to do one comp on multiple tracks..

I may be missing the an obvious feature, but I can't work out how to apply the same comp to multiple tracks. I.e. I record an instrument with more then one mic and am left with several tracks of the same take however from different microphone and positions. I then comp the best take, however I want my comp to be the same on each of the individual tracks. Please could someone help?
Regards,
t

I believe I may have answered this before, but anyway: the trick is to make the tracks part of the same group. In the group settings, chose only Regions selection (Edit). Now, when you edit one track, the other tracks in the same group will follow.
Hope this helped!
Juhani

Quick swipe comping multiple tracks?

recently upgraded to Logic Studio from logic pro 7...I'm loving the quick swipe comping feature!!
anyone know if there is a way to use the quick swipe comping on multiple tracks simultaneously? for example, comping multi-track drums?
I've tried grouping the tracks, but can only get comping to work on one track at a time...

Hi all. I've searched the forum a bit for an answer, but couldn't find one. Here's the deal:
I finally need to do drum comping in Logic 8. I understand groups and enabling the edit feature, but man, am I getting some screwy results! (I have used the comping feature before on non-grouped tracks and it's worked fine.)
I can select whole takes, and every so often I can quick-swipe another take, but logic seems to erratically "undo" all my previous comps sometimes. Other times, it won't let me quick swipe at all. I'm in version 8.0.1.
Any ideas? Man, this thing would be a great tool *if it worked correctly*! I know, I know, no whining. But you gotta know how it feels when you're in the middle of a session.

X-Fi Platinum Multiple track record

??I have been doing a little reading on the forum for multiple track recording but I could not find anything specific enough for what i need. I have a Fostex digital recorder and i would like to either send out the multiple tracks of say a drum recording to multiple tracks on Majix Music Studio ten. I have been playing around with it but i cant find exactly what I need. Ideally I would like to use the ADAT format from a digital optical cable to bring in the individual wave files directly to the computer. But if?can find a better way or if sombody knows of a fairly inexpensi've digital mixer with at least 6 channels (any input preferably XLR). Also my recorder has SPDIF but only in a two track format. It also has MIDI outputs and inputs but so far I dont think I can use that?for controling my software and sending in multiple tracks. I know my program can do ASIO and WDM. But I dont know what inputs are assigned to what numbers. If any body can awnser any one of these questions please post. ASIO sounds great but how do I identify the track numbers to what input and can i input all the tracks from a digital input?Comp info:?Windows

W/ ASIO, you can record from as many sources as you get listed/selected separetley in ASIO input port list (meaning those w/ names like Line-In, S/PDIF-In, Mic-In, Aux-In since, there are many of those ports meant for internal routings (W-U-H)). I don't know if you can use S/PDIF and analog inputs simultaenously. Here are some detailed information for Creative ASIO drivers (for Audigy cards but ...) - http://forums.creative.com/creativelabs/board/message?board.id=profaudio&message.id=726
I think that Fostex is not very usable for you if you don't build a ADAT system over it. If you have the ADAT option in Fostex already available there and you can get 8 separate channels out from Fostex through it then you could get a soundcard which supports ADAT I/O (something like E-MU 22m ($99 atm.)) and record through Fostex into PC (though, A/D conversion quality Fostex does is propably not very good). Maybe you need more mic-preamps to record drums then too.
jutapaMessage Edited by jutapa on 0-5-200708:32 PM

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Multiple tracks on a single processor

Hi,
Whenever I create an audio processor, the number of tracks is always one, that figures that I can only transmit a single codec, like gsm or ulaw. Say, i need a processor with multiple tracks in order to switch codecs dynamically during session. How can it be done? i've tried using ProcessorModel and feed it with multiple audio formats, but it would throw a CannotRealizeProcessor exception all the time. Any ideas?

I was waiting for someone to give you an answer on this because I'm curious if anyone has been able to do what you described...
Alas, from the extreme silence I assume nobody has been able to do what you describe. Personally, I think I would create a custom Codec that would incorporate the codecs I wanted to switch between and do it that way. You would have only one track but the codec would have to somehow know when to switch decoding/encoding methods. Presumably a payload change event or other programming event could trigger this. This is somewhat similar to how I've handled DTMF events with Ulaw data in the past.

Advice Needed: Filtering/Adding effects to multiple tracks

I'm writing a dance song, and at one point would like to apply a few filtering sweeps on selected drum tracks.
Which is the best way to do it? Is it to bounce down the tracks into an audio file, then apply the effects onto that file by itself, or is it better to route the multiple tracks to an effects bus?
I have been trying using a bus, but have found that as soon as I route the tracks to the bus, the is a change in the sound quality of the track (louder and sometimes slightly distorted), even without any plugins on the bus. Am I doing something wrong?
Thanks.

I have been trying using a bus, but have found that as soon as
I route the tracks to the bus, the is a change in the sound quality
of the track (louder and sometimes slightly distorted), even
without any plugins on the bus. Am I doing something wrong?
How are you routing to a bus? If you are just using sends, then what's happeing is that the individual channels are going to the master output, and also being sent to a bus that is also going to the master output - this everything sent to that bus will get louder.
If you want to send a bunch of channels directly to a bus for insert processing, then change each channel's output to the bus, rather than the main output, so the individual channels only go to the mix via the bus, and not directly.
Or are you doing something different to that?

How do I extract multiple tracks from a CD into a single file in Audition CS6?

I use Audition to edit my Pastor's messages. The message CD is made with five minute tracks. I want to extract the tracks from the CD into a single file for editing and altering the track lengths. I have done this before in Audition CS6, but I haven't been able to find instructions for it. I only found a note stating this is available in AuditionCC.

I have discovered an answer to my problem. The way to bring multiple tracks into Audition CS6 from a CD is to use the FILE / OPEN APPEND / TO NEW command. This brings the separate tracks into a single file in Audition CD6. Thanks to everyone who commented.

Is there any way to change user operations on multiple tracks at once?

I have a complex project (99 tracks, dozens of menus and scripts). I need to make one version of this DVD for the end client (teenagers at health clinics) who will be forced to view it in a specified way, and another version for educators (staff at the clinics) who will be allowed to fast-forward and have access to a menu from which they can jump to different points in the DVD.
I have different menus to serve as "first play" for these different versions so that I can easily switch between versions when burning disc images, and I have set up GPRMs to make navigation different for the two versions automatically. My problem now is that I want to disable forward scan, next program, root menu, and title menu for the client version. As far as I can tell, I have to do that independently for every single track and menu. Bleah. This is especially annoying since the DVD is still in development, so I am continuing to change small things and will need to keep both versions up to date as I do.
Is there any way to select multiple tracks/menus and change user operations on all of them? Or any other work-around or script that could do it? I thought this would be a perfect task for the automator, but I'm not very familiar with that application and don't know how (or if it's possible) to create new actions other than the ones that are available.
Any ideas?
thanks!
Julie

Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

How do I select multiple tracks in iTunes?

It's like a hold down control and something else, and then drag the curser to select the songs you want selected. I'm not sure what this shortcut is. Again, I want to select multiple tracks on iTunes so I can move files or delete them. Simply selecting all won't work because the files are different names. Anyone know this shortcut? Thanks!

If you click a track, hold down shift, and then click another one, it will select all the tracks between those two. Holding down command (the apple key) will allow you to select/deselect individual tracks.

Fast/most efficient way to cut out of multiple tracks at the same time

I try to select by dragging around but it lights up the entire length of each tract- I can use the scissors to manually cut the tracks but there has to be a better way...any ideas?
Thanks, Don

I don't know if this is most efficient but here's my "home grown" way:
I place the section locator bars located at the top in the area I want to cut. You can fine tune this by zooming in close. I then right click on the track and use the split at locator function. I then can cut, drag or copy just that new, separate area. If you want to cut multiple tracks you can leave the locators where they are and repeat on all the tracks you want to split. I haven't tried selecting multiple tracks, and I'm not at my computer to try it right now.
Maybe there's a quicker way but that has worked for me!

JAR Files for multiple tracks

Hi All,
We have a scenario where we need to provide JAR files which needs to be accessible by all the tracks.Is there any solution which is being followed.
In the current landscape we have built external library DC's for each track and trying to access the JARS. But the limitation where we are struck up is this DC is being only accessible to DC's in that track but not to the remaining tracks.
Is there a global solution where we i can make my JAR file can be made accessible to multiple tracks.
Thanks & Regards,
Lokesh Kamana.

Hi,
Thats a good idea.
I have a SC component created in SLD and create a track for this and copy the ext lib DC to this track.
Define outbound connections for moving transports.
But how to create an SCA file for my DC.
ANS:-Just by clicking on assembly get a SCA file for this track and as outbound connection is defined this SCA gets moved to my track import that to all my tracks where i carry out my development.
While moving the transports to other environments do i need to move this SCA file also along with them.
Please let me know whether my understanding is correct or not.
Thanks & Regards,
Lokesh Kamana.

HT1451 when editing info, how do i select multiple items to edit a group? For example, changing the artist name on multiple tracks at once?

when editing info, how do i select multiple items to edit a group? For example, changing the artist name on multiple tracks at once?

Same way you select multipl items anywhere else.
Hold ctrl and click the items you want.
If they are in consecutive order, click the 1st then Shift click the last.

Trying to record multiple tracks (24) in Garageband with 3 presonus firestudio devices daisy-chained together.

Please help !! I can record multiple tracks (8) on a single presonus firestudio, but now I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
The three units will sync up properly, and Garageband detects all of the input channels, but the recording doesn't pick up the input signals for the 2nd or 3rd device. It only picks up the signals from the first device. I read the manual and daisy-chained the devices by serial number (lowest to highest).
Any help would be greatly appreciated.
Thanks

avotrans wrote:
I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
you'll need to create an aggregate device:
http://www.bulletsandbones.com/GB/GBFAQ.html#multipleaudiointerfaces
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to add artwork to multiple tracks

I am having trouble adding artwork to multiple tracks of the same album. I highlight all tracks so the info comes up for the entire album. When I drag the artwork into the box it bounces back onto the desktop and won't add like it used to. I can go through and add art to individual tracks, but that is a very slow process. I am sure I am just missing something.

Instead of dragging artwork into box, double click on box. This opens a window where you can find and select the artwork.

Multiple track comping?

Similar Messages

Maybe you are looking for